josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8,212 Commits 31 Branches 140 Tags 71 MiB
Commit Graph

8212 Commits

Author SHA1 Message Date
Alex Voinea cb502ee7bc Update MSG_MBL_FAILED translations 
Thanks @3d-gussner
 2024-09-03 09:28:16 +02:00
Alex Voinea b614b9c43d Do not prompt for steel sheet on bed during XYZ calibration 
Thanks @3d-gussner
 2024-09-03 09:28:16 +02:00
Alex Voinea b58d2ecccb Prompt user for Z calibration after failed MBL with yes-no screen 2024-09-03 09:28:15 +02:00
Alex Voinea 357b68cf76 Ask for steel sheet on bed during Z calibration 2024-09-03 09:28:15 +02:00
Alex Voinea d2119c24e1 Prompt Z calibration when 7x7 MBL is enabled 2024-09-03 09:28:15 +02:00
Alex Voinea 8196e48684 Reduce number of Z realignments before Z calibration is requested 2024-09-03 09:28:15 +02:00
Alex Voinea d8e3c2b481 Relax 3x3 MBL threshold 2024-09-03 09:28:15 +02:00
3d-gussner 83c43fba02
Merge pull request #4767 from gudnimg/linearity-correction-opt-v2 
optimisation: Simplify saving linearity correction
 2024-09-02 11:18:44 +02:00
Guðni Már Gilbert b3a682d330 Always re-init the TMC drivers after leaving linearity correction menu 
Change in memory:
Flash: -22 bytes
SRAM: 0 bytes
 2024-09-01 22:14:25 +00:00
gudnimg 312f79c5f5 optimisation: Simplify saving linearity correction 
Keep in mind that the EEPROM addresses are in descending order. This means we
can't use eeprom_read_block() or eeprom_update_block()

Address --> Axis
3831 --> X-axis
3830 --> Y-axis
3829 --> Z-axis
3828 --> E-axis

Change in memory:
Flash: -118 bytes
SRAM: 0 bytes
 2024-09-01 12:34:00 +00:00
3d-gussner 6c99a4463e
Merge pull request #4755 from sarusani/AddLoadIfAutoloadDisabled 
Add "load filament" if autoload is disabled
 2024-08-30 17:11:37 +02:00
sarusani a259482b6b Add load option if autoload is disabled 2024-08-30 14:48:45 +02:00
3d-gussner 923f926223
Merge pull request #4749 from gudnimg/remove-auto-bed-leveling 
Remove legacy Auto Bed Leveling code
 2024-08-30 10:44:50 +02:00
3d-gussner d3c326de99
Merge pull request #4727 from gudnimg/improve-missing-filament 
PFW-1559 Add filament presence check at start of print
 2024-08-30 10:44:05 +02:00
Guðni Már Gilbert af6fbb13de
Merge pull request #8 from 3d-gussner/MK3_fix_PR4727 
Fix LCD output and add translations
 2024-08-30 08:35:27 +00:00
3d-gussner 56de4bf53b Update Community translation list 
- Croatian, Swedish and Norwegian are inactive since the last few translation review requests have not been done
 2024-08-30 08:14:23 +02:00
3d-gussner b9b32b0d9f Update Slovak translation 
Thanks to @ingbrzy @shatter136
 2024-08-28 12:07:20 +02:00
3d-gussner 6af6b402cc Update Czech and Italian translations 
Thanks to @DRRacer and @wavexx
 2024-08-28 11:29:28 +02:00
3d-gussner 1a717986c1 Update Hungarian translation 
Thanks to @AttilaSVK
 2024-08-27 07:11:32 +02:00
3d-gussner 6fa80045b5 Another Dutch translation fix 2024-08-26 14:15:31 +02:00
3d-gussner ff9a476121 Update Dutch translation 
Thanks to @stelgenhof
 2024-08-26 14:13:28 +02:00
3d-gussner e90b536c9b Update Romainian translations 
Thanks to @petrubecheru and @Hauzman
 2024-08-26 13:46:23 +02:00
3d-gussner b353f1f008 Add missing translations 
Used `trans -b :cs+de+es+fr+hr+hu+it+nl+no+pl+ro+sk+sv "<text>"` to translate
Looked at pre-translated text to reuse as much as possible.
 2024-08-26 10:02:56 +02:00
3d-gussner c1360d7bfb Fix LCD output 
Configuration->HW Setup->Checks showed `a`

MSG_FILAMENT `Filament` can only be 8 chars long and only ES and IT had `Filemanto` as translation.
But as ES the `o` in `Filamento` was overwritten by `[Estricto]` I removed the MSG_FILAMENT to be translated.
Saves few bytes.
 2024-08-26 09:20:05 +02:00
gudnimg f7e3195d78 Remove CUSTOM_M_CODES define 2024-08-24 16:33:00 +00:00
Guðni Már Gilbert 2b1c49dae2 Remove legacy Auto Bed Leveling code 
The goal is to clean up the project
 2024-08-24 07:11:38 +00:00
Guðni Már Gilbert f5fe658728 fixup after rebase 2024-08-24 07:10:24 +00:00
Guðni Már Gilbert 5e66e71a48 Check if MMU is enabled by reading EEPROM 2024-08-24 07:10:24 +00:00
gudnimg 4ed5b36199 Use a fresh EEPROM cell for the new value 2024-08-24 07:10:24 +00:00
gudnimg 40d3830e6d Simplify filament_presence_check usage 
Pull all checks needed into the function such that the caller
only needs to check the return value

Also added description for the filament_presence_check function
 2024-08-24 07:10:23 +00:00
gudnimg 75c980c4e7 optimisation: deduplicate more code 
Change in memory:
Flash: -54 bytes
SRAM: 0 bytes
 2024-08-24 07:10:23 +00:00
Guðni Már Gilbert b7caf36207 optimisation: deduplicate printer check toggle menus 
This saves ~100B of flash
 2024-08-24 07:10:23 +00:00
Guðni Már Gilbert bf72ecc3f9 Add filament presence check at start of print 
A new menu setting is added to configure how strict the check should be.

- None: No check is performed
- Warning (default): The user is warned about missing and is prompted to continue with Yes/No. If No is selected, the print is aborted. If no user input is given (e.g. from host printing) then the warning will expire in 30 seconds and assume the Yes option was selected
- Strict: If the filament is not detected when a print is started, it is immediately canceled.

The check is currently performed on G-codes: M24 and M75. Starting a SD print and Host print respectively.
 2024-08-24 07:10:23 +00:00
3d-gussner 055f601ad3
Merge pull request #4751 from sarusani/FilamentRunoutActions 
Send host actions on filament runout
 2024-08-23 15:13:08 +02:00
3d-gussner 96d6192be5
Merge pull request #4760 from 3d-gussner/MK3_New_github_issue_templates 
New GitHub issue templates
 2024-08-23 14:52:02 +02:00
3d-gussner d3cec58a7a
Merge pull request #4761 from 3d-gussner/MK3_MMU303 
Update MMU version to 3.0.3
 2024-08-23 14:40:41 +02:00
3d-gussner 8fe73a0dc2 Update to MMU FW 3.0.3 2024-08-23 14:31:49 +02:00
3d-gussner c27fb616e0
Merge pull request #4737 from sarusani/ReplaceSetReadyMenuEntry 
Allow to replace Set Ready menu entry
 2024-08-23 14:30:44 +02:00
3d-gussner 7d66cd1ca0
Merge pull request #4758 from sarusani/CheckFSBeforeNozzleChange 
Abort nozzle change if filament is loaded
 2024-08-23 11:18:28 +02:00
sarusani a2022471ce Send host actions on filament runout 2024-08-23 10:44:38 +02:00
sarusani a9e7f387e8 Replace Set Ready menu entry 
Replace "Set Ready"/"Set nor Ready" menu entry with "Print from host" entry.
Use "action:start" instead of "action:ready"
 2024-08-23 10:24:01 +02:00
sarusani 64d9f201da Exit Nozzle Change if filament is loaded 
Abort Nozzle change if fsensor is enabled and filament is present.
 2024-08-23 10:12:01 +02:00
3d-gussner 2f7715a0b0
Merge pull request #4759 from Panayiotis-git/MK3_M600_Filament_name 
PFW-1204: M600 - Show filament name at the Insert filament prompt
 2024-08-22 16:26:58 +02:00
3d-gussner 0e84d0bb41 Update some text 2024-08-22 14:45:15 +02:00
Panayiotis-git 815b68678d M600 - Show filament name at the Insert filament prompt 2024-08-21 20:56:13 +03:00
3d-gussner f64f2bbe68
Merge pull request #4747 from gudnimg/minor-fixes-for-future-tests 
Fix compiler warning and add missing includes in unit test environment
 2024-08-20 11:14:06 +02:00
3d-gussner e2e6999887
Merge pull request #4753 from gudnimg/remove-HEATER_BED_DUTY_CYCLE_DIVIDER 
Remove dead configuration `HEATER_BED_DUTY_CYCLE_DIVIDER`
 2024-08-19 08:47:22 +02:00
Guðni Már Gilbert 3da141b3a7 Remove dead configuration HEATER_BED_DUTY_CYCLE_DIVIDER 
Setting HEATER_BED_DUTY_CYCLE_DIVIDER has no effect on the firmware
 2024-08-15 17:58:07 +00:00
3d-gussner 21fc1ddf00
Merge pull request #4750 from sarusani/LessZAxisMovementOnManualFilamentUnload 
Lower MIN_Z_FOR_UNLOAD
 2024-08-14 13:03:32 +02:00
sarusani d3f2dce430 Lower MIN_Z_FOR_UNLOAD 
Sync value with Buddy firmware
 2024-08-14 12:09:41 +02:00