d1fd5a555f
Clean up gfReset()
2021-01-27 14:12:11 +01:00
b2cf5b7b6c
Fix seekSetFilteredGcode()
...
+some more debug code which will vanish after all is done and verified
2021-01-27 13:01:25 +01:00
b6c59e08ac
Workaround ++gfCacheP into postincrement ld r22, Z+
...
TODO: ideally improve the automaton to work with postincrement only, at
least in this case.
2021-01-27 09:52:20 +01:00
d275fe0e83
Extract gcode filter from SdBaseFile into SdFile + optimization
...
- Start saving instructions as the whole PR was >1KB long.
- It turned out the compiler was unable to understand the core skipping
cycle and an ASM version had to be used.
- Add seekSet aware of the G-code filter
2021-01-27 09:33:28 +01:00
c3758d350e
Fast skipping of large comment blocks
...
This is an extension/optimization of PR #2956 .
It uses the cached 512B block buffer to avoid heavy-weight read() in SdBaseFile.
Even though this principle allowed the AVR to skip ~600KB of data within ~5 seconds,
the impact on code base is huge, especially into well proven and long-term stable
parts like reading a file from the SD card.
The sole purpose of this PR is to show/verify the possibility of the AVR CPU
in relation to adding thumbnails into MK3 G-codes.
Moreover, this PR shall not be merged unless the missing/commented features
are restored - especially file seeking and M84 search.
PFW-1175
2021-01-27 07:03:51 +01:00
dcc6605809
Workaround for skipping large comment blocks
...
If there are large blocks of comments in the G-code,
the printer may get shot down by its own watchdog.
Watchdog is generally set to 4s and updated only
in manage_heaters (and some other spots in some specific cases).
So far, the code reading the file and feeding it into Marlin
cycles indefinitely until it finds valid G-code lines and fills up the
command queue.
If the block is large enough, the printer cannot read it completely
within those 4s.
A simple workaround - bail out after some consecutive empty/comment
lines to enable other parts of code do their job (especially
manage_heaters).
Tested on MK404, previous FW fails with 600KB of comment lines at the
beginning, this patch survives. The printer even draws some update
on its status screen before starting a real print.
2021-01-27 07:03:51 +01:00
c28e5a9dbc
Farmer's request 2
...
Farmers request having the Change filament menu item always visible in
the main menu and located after the Live Adjust Z (which disappears
after the first few printed layers).
2021-01-26 12:19:41 +01:00
bfe93d3959
Merge pull request #2951 from DRracer/pvb-08
...
Add PVB preheat and 0.8mm nozzle presets
2021-01-26 12:09:41 +01:00
891f37a622
Merge pull request #2982 from DRracer/codesize
...
Reduce code size and RAM usage
2021-01-26 12:04:39 +01:00
0aae433bda
Update po files after all these changes
2021-01-26 11:08:57 +01:00
c555907a12
Remove duplicate string `G-code sliced for a different printer type. Please re-slice the model again. Print cancelled.` using `MSG_GCODE_DIFF_PRINTER_CANCELLED`
2021-01-26 11:01:50 +01:00
51d1e0bd8a
Remove duplicate string `G-code sliced for a different printer type. Continue?` using `MSG_GCODE_DIFF_PRINTER_CONTINUE`
2021-01-26 10:42:56 +01:00
7916f8b9e8
Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize
2021-01-26 10:13:11 +01:00
0eb7261e29
Save ~100B on menu implementation
2021-01-26 09:29:17 +01:00
ba8386573a
Remove duplicate string `Resume print` using `MSG_RESUME_PRINT`
2021-01-26 09:23:55 +01:00
c6a01b3806
Remove duplicate string `Reset` using `MSG_RESET`
2021-01-26 09:15:46 +01:00
ab5aad636f
Remove duplicate string `Mesh Bed Leveling` and `Mesh bed leveling` using `MSG_MESH_BED_LEVELING`
...
Fixed few too long translations
2021-01-26 09:05:38 +01:00
f4cee7ce84
Merge pull request #2983 from leptun/MK3_fix_sm4.h_line_ending
...
Fix sm4.h line ending
2021-01-26 08:45:07 +01:00
bce9f8c949
Merge pull request #2984 from leptun/MK3_Serial_LF_only
...
Do not send CR on the serial line
2021-01-26 08:42:47 +01:00
c465417f50
Merge pull request #2987 from leptun/PFW-1144-LongPathName
...
"M20 L" support. Print long filenames
2021-01-26 08:40:26 +01:00
84ed0725f2
Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize
2021-01-26 08:32:03 +01:00
bce8501eea
Remove duplicate string `Extruder` using `MSG_Extruder`
2021-01-26 08:31:21 +01:00
c6588193ad
Fix some more stuff in cardreader.cpp
...
Saved 4B of flash and 60B of RAM
2021-01-26 09:25:41 +02:00
ab18a3ccc3
Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize
2021-01-26 08:24:11 +01:00
530b9f50b8
Remove duplicate string `Eject filament` using `MSG_EJECT_FILAMENT`
...
Fix few translations
2021-01-26 08:22:08 +01:00
348902240e
Fix code_seen_P("fv") broken by one of the merges
2021-01-26 08:02:33 +01:00
269fabc330
Remove duplicate string `Cut filament` using `MSG_CUT_FILAMENT`
2021-01-26 07:15:46 +01:00
797d8e74a3
Remove duplicate string `Checking X axis` and `Checking Y axis` using `MSG_CHECKING_X` and `MSG_CHECKING_Y`
2021-01-26 07:10:57 +01:00
2d1e1e4cee
Remove duplicate string `Fans check` using `MSG_FANS_CHECK`
2021-01-25 20:13:12 +01:00
d117a299f7
Remove duplicate string `Fil. runouts ` using `MSG_FIL_RUNOUTS`
2021-01-25 20:04:18 +01:00
10bbd64b41
Remove duplicate string `Crash` using `MSG_CRASH`
...
Better Italian translation, thanks to @wavexx
Fix Polish translation as it was too long for the menue and caused LCD issues.
2021-01-25 18:53:53 +01:00
4878db7365
Remove duplicate string `Last print failures` using `MSG_LAST_PRINT_FAILURES`
...
Fix too long translations in Spanish and Italian for this message
2021-01-25 18:38:35 +01:00
99867c8fbd
Remove duplicate string `Total failures` using `MSG_TOTAL_FAILURES`
2021-01-25 18:06:47 +01:00
8f0a45e8a4
Remove duplicate string `Steel sheets` and `Total` using `MSG_STEEL_SHEETS` and `MSG_TOTAL`
2021-01-25 17:58:51 +01:00
7222cf05cf
Remove duplicate string `MMU Fails` and `MMU Load Fails` using `MSG_MMU_FAILS` and `MSG_MMU_LOAD_FAILS`
2021-01-25 17:38:36 +01:00
fbb3fad64b
Remove duplicate string `Last print` using `MSG_LAST_PRINT`
2021-01-25 16:54:26 +01:00
7891d12a32
Remove duplicate string `Is filament loaded?` using `MSG_FILAMENT_LOADED`
2021-01-25 16:44:55 +01:00
223f32deae
Remove duplicate string `HW Setup" using `MSG_HW_SETUP`
2021-01-25 16:15:57 +01:00
5c1da227fe
Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize
2021-01-25 16:00:46 +01:00
377a59c624
Remove duplicate string `Belt status`
2021-01-25 15:53:31 +01:00
d8917a304a
Reuse lcd_space() instead of in-place printing of spaces in a cycle
...
Saves another ~40B
2021-01-25 15:21:25 +01:00
783e4bbaf9
Add lcd_putc_at (code down >150B), refactor lcd_selftest_screen_step
...
(RAM down 10B)
2021-01-25 14:58:57 +01:00
3975415490
Merge branch 'MK3' into codesize
2021-01-25 12:43:30 +01:00
58351fb27a
Merge pull request #2977 from DRracer/farm-patch1
...
Farmers' requests
2021-01-25 11:15:44 +01:00
514321f2ce
Remove farm_no completely + reuse prusa_stat_farm_number() where
...
applicable
2021-01-25 11:09:28 +01:00
2b3729125d
Prevent wdt reset during file listing
2021-01-25 11:46:51 +02:00
c1ff6242b0
Avoid copying FW version number into RAM - use the PROGMEM string
2021-01-25 09:03:04 +01:00
4f769f0faa
PRUSA RESET safety precaution
2021-01-25 09:58:12 +02:00
9fa9d6b063
Move farm strings to PROGMEM
2021-01-25 09:48:17 +02:00
6a62674bd8
Keep PRUSA RESET available even in non-farm mode
2021-01-25 08:43:37 +01:00
D.R.racer
DRracer
3d-gussner
Voinea Dragos