d8d058a63b
Add Set parameter in M78 Statistics gcode ( #4809 )
...
* Add Set Statistics
* EEPROM_FILAMENTUSED is in centimeter and not meter
Fix few things
* Fix typo
2024-11-14 08:20:39 +01:00
cdb6635eac
Remove hardcoded MMU tool count
...
- Preload to MMU -> All
- Loading Test -> All
- SpoolJoin
2024-10-29 15:50:01 +01:00
f12683f3ff
Further relax the MBL tight threshold
2024-09-24 10:33:23 +02:00
402b9ed93a
Add `#ifdef FANCHECK` thanks @gudnimg
2024-09-23 07:00:17 +02:00
65a26e882b
Enable Tune menu during fan check issues, user can then disable the fan check if needed.
...
Send //action:cancel when LCD Stop print is selected.
2024-09-18 16:09:46 +02:00
29c920c801
Fix MMU unload issue after a fan check issue has been solved
2024-09-18 16:09:46 +02:00
de092b35d5
PFW-1562 Fix an issue where safety timer is not handled correctly in mFilamentPrompt menu
2024-09-15 10:28:10 +00:00
7d3032c001
Bump up version to FW3.14.1-RC1-8225
2024-09-04 09:33:47 +02:00
6ea47967da
Merge pull request #4765 from leptun/MBL_fixes
...
Region MBL fixes
2024-09-04 07:42:48 +02:00
4e9e20c67f
Merge pull request #4766 from gudnimg/remove-sm4_line_xyze_ui
...
Remove sm4 line xyze UI
2024-09-03 15:22:56 +02:00
3facdb4576
Add new message and translations
2024-09-03 09:34:18 +02:00
b614b9c43d
Do not prompt for steel sheet on bed during XYZ calibration
...
Thanks @3d-gussner
2024-09-03 09:28:16 +02:00
b58d2ecccb
Prompt user for Z calibration after failed MBL with yes-no screen
2024-09-03 09:28:15 +02:00
357b68cf76
Ask for steel sheet on bed during Z calibration
2024-09-03 09:28:15 +02:00
d2119c24e1
Prompt Z calibration when 7x7 MBL is enabled
2024-09-03 09:28:15 +02:00
8196e48684
Reduce number of Z realignments before Z calibration is requested
2024-09-03 09:28:15 +02:00
d8e3c2b481
Relax 3x3 MBL threshold
2024-09-03 09:28:15 +02:00
b3a682d330
Always re-init the TMC drivers after leaving linearity correction menu
...
Change in memory:
Flash: -22 bytes
SRAM: 0 bytes
2024-09-01 22:14:25 +00:00
312f79c5f5
optimisation: Simplify saving linearity correction
...
Keep in mind that the EEPROM addresses are in descending order. This means we
can't use eeprom_read_block() or eeprom_update_block()
Address --> Axis
3831 --> X-axis
3830 --> Y-axis
3829 --> Z-axis
3828 --> E-axis
Change in memory:
Flash: -118 bytes
SRAM: 0 bytes
2024-09-01 12:34:00 +00:00
aa8569600c
Fix build and make sm4 a C++ file
2024-09-01 12:12:24 +00:00
a2d45e5d11
cleanup: remove unused global sm4_cpu_time
2024-09-01 12:11:56 +00:00
f115adf894
cleanup: remove unused function sm4_get_dir
2024-09-01 12:11:56 +00:00
5a5c68f563
cleanup: remove unused function sm4_get_dir_bits
2024-09-01 12:11:56 +00:00
7d3c416d04
cleanup: remove unused function sm4_line_xyze_ui
...
No change in code size. Reason for removing this function
is just to reduce lines of code that is maintained.
2024-09-01 12:11:22 +00:00
6c99a4463e
Merge pull request #4755 from sarusani/AddLoadIfAutoloadDisabled
...
Add "load filament" if autoload is disabled
2024-08-30 17:11:37 +02:00
a259482b6b
Add load option if autoload is disabled
2024-08-30 14:48:45 +02:00
923f926223
Merge pull request #4749 from gudnimg/remove-auto-bed-leveling
...
Remove legacy Auto Bed Leveling code
2024-08-30 10:44:50 +02:00
b353f1f008
Add missing translations
...
Used `trans -b :cs+de+es+fr+hr+hu+it+nl+no+pl+ro+sk+sv "<text>"` to translate
Looked at pre-translated text to reuse as much as possible.
2024-08-26 10:02:56 +02:00
c1360d7bfb
Fix LCD output
...
Configuration->HW Setup->Checks showed `a`
MSG_FILAMENT `Filament` can only be 8 chars long and only ES and IT had `Filemanto` as translation.
But as ES the `o` in `Filamento` was overwritten by `[Estricto]` I removed the MSG_FILAMENT to be translated.
Saves few bytes.
2024-08-26 09:20:05 +02:00
f7e3195d78
Remove CUSTOM_M_CODES define
2024-08-24 16:33:00 +00:00
2b1c49dae2
Remove legacy Auto Bed Leveling code
...
The goal is to clean up the project
2024-08-24 07:11:38 +00:00
f5fe658728
fixup after rebase
2024-08-24 07:10:24 +00:00
5e66e71a48
Check if MMU is enabled by reading EEPROM
2024-08-24 07:10:24 +00:00
4ed5b36199
Use a fresh EEPROM cell for the new value
2024-08-24 07:10:24 +00:00
40d3830e6d
Simplify filament_presence_check usage
...
Pull all checks needed into the function such that the caller
only needs to check the return value
Also added description for the filament_presence_check function
2024-08-24 07:10:23 +00:00
75c980c4e7
optimisation: deduplicate more code
...
Change in memory:
Flash: -54 bytes
SRAM: 0 bytes
2024-08-24 07:10:23 +00:00
b7caf36207
optimisation: deduplicate printer check toggle menus
...
This saves ~100B of flash
2024-08-24 07:10:23 +00:00
bf72ecc3f9
Add filament presence check at start of print
...
A new menu setting is added to configure how strict the check should be.
- None: No check is performed
- Warning (default): The user is warned about missing and is prompted to continue with Yes/No. If No is selected, the print is aborted. If no user input is given (e.g. from host printing) then the warning will expire in 30 seconds and assume the Yes option was selected
- Strict: If the filament is not detected when a print is started, it is immediately canceled.
The check is currently performed on G-codes: M24 and M75. Starting a SD print and Host print respectively.
2024-08-24 07:10:23 +00:00
055f601ad3
Merge pull request #4751 from sarusani/FilamentRunoutActions
...
Send host actions on filament runout
2024-08-23 15:13:08 +02:00
8fe73a0dc2
Update to MMU FW 3.0.3
2024-08-23 14:31:49 +02:00
c27fb616e0
Merge pull request #4737 from sarusani/ReplaceSetReadyMenuEntry
...
Allow to replace Set Ready menu entry
2024-08-23 14:30:44 +02:00
a2022471ce
Send host actions on filament runout
2024-08-23 10:44:38 +02:00
a9e7f387e8
Replace Set Ready menu entry
...
Replace "Set Ready"/"Set nor Ready" menu entry with "Print from host" entry.
Use "action:start" instead of "action:ready"
2024-08-23 10:24:01 +02:00
64d9f201da
Exit Nozzle Change if filament is loaded
...
Abort Nozzle change if fsensor is enabled and filament is present.
2024-08-23 10:12:01 +02:00
815b68678d
M600 - Show filament name at the Insert filament prompt
2024-08-21 20:56:13 +03:00
f64f2bbe68
Merge pull request #4747 from gudnimg/minor-fixes-for-future-tests
...
Fix compiler warning and add missing includes in unit test environment
2024-08-20 11:14:06 +02:00
e2e6999887
Merge pull request #4753 from gudnimg/remove-HEATER_BED_DUTY_CYCLE_DIVIDER
...
Remove dead configuration `HEATER_BED_DUTY_CYCLE_DIVIDER`
2024-08-19 08:47:22 +02:00
3da141b3a7
Remove dead configuration HEATER_BED_DUTY_CYCLE_DIVIDER
...
Setting HEATER_BED_DUTY_CYCLE_DIVIDER has no effect on the firmware
2024-08-15 17:58:07 +00:00
d3f2dce430
Lower MIN_Z_FOR_UNLOAD
...
Sync value with Buddy firmware
2024-08-14 12:09:41 +02:00
80f27618c9
Marlin: drop lcd.h include
...
Only include it where needed
2024-08-13 23:40:18 +00:00
3d-gussner
Alex Voinea
gudnimg
sarusani
Panayiotis-git