4f8dbb19fd
Fix `M862.x` LCD messages
...
As the new menue adds a Yes/No option the messages
need to be limited to c=20 r=3
Updated/shortened all translations
2023-02-10 14:35:36 +01:00
b28aa6f42a
PFW-1471 Rename 'Toolchange count' to 'Material changes'
...
Added the string to our message so it can be translated
Change in memory:
Flash: -10 bytes
SRAM: 0 bytes
2023-02-06 08:33:40 +01:00
dba3428ef2
Improve MSG_ACK_ERROR message
2022-12-17 20:25:47 +01:00
f8290f25cd
TM: Allow to resume without a running print
...
If there is no running print, and the printer is Stopped, add a new
"Acknowledge error" menu entry to unlock the printer.
This simply calls lcd_print_stop(), which is identical in behavior to a
thermal error with a running print.
2022-12-17 16:48:39 +01:00
54ef2a6c28
Merge pull request #3769 from 3d-gussner/MK3_Temp_model_cal_wizard
...
PFW-1434: MK3 Temp model calibration during wizard
2022-11-30 15:33:38 +01:00
32673e1681
Nozzle change menu
2022-11-23 11:39:26 +01:00
4eaabbf092
Revive MMU stats + LCD screens
2022-11-20 17:27:36 +01:00
281a217549
Update Temp Model messages
...
Deepl translate cs,de,es,fr,it,nl,pl
2022-11-20 10:49:46 +01:00
2096accc5f
Remove unused gcode level check code
...
This code was introduced with v3.8.0 but was always disabled.
I propose the code be removed since it has not been enabled
for 3 years since its introduction.
2022-11-17 08:05:27 +01:00
e11ef11a64
PFW-1425 Rename "Load to Extruder" to "Loading Test"
2022-11-16 06:00:15 +01:00
f2fe9a51ee
rename `Extruder fan` to `Hotend fan`
2022-10-17 13:49:18 +02:00
74e15ac233
Rename EN_ONLY to EN_FARM
...
remove DEBUG/DEVEL/ALPHA/BETA lcd warning
2022-09-29 16:39:02 +02:00
346dfbdbb3
Fix MSG_SPOOL_JOIN
2022-09-29 10:54:46 +02:00
c7b500af1e
BETA firmware message only in English
...
Rephrase BETA firmware message to fit on two screens
ALPHA message same as DEVEL
Fix ALPHA DEVEL message
2022-09-29 10:48:16 +02:00
47d7ea5dfd
Add MSG_LOAD_ALL and replace it a two loactions -10bytes flash
2022-09-17 16:36:09 +02:00
2ba863d8a5
Reuse MSG_IR_0x_OR_..
...
fix lowercase
remove todos
2022-09-16 17:23:38 +02:00
edad625cf7
RIP Bondtech long live the Extruder
2022-09-16 16:31:27 +02:00
37cde856e9
Rename Auto_deplete to Spool_join
...
Fix some missing MSG_ c= r=
2022-09-16 16:25:47 +02:00
2d98cae8bd
Fixup MK3_MMU2 branch after rebase onto MK3
2022-09-16 11:08:03 +02:00
37b50477cd
Fixup after rebase onto MK3
2022-09-16 10:23:47 +02:00
121d43f896
Add a Try-Load-to-Bondtech operation
...
PFW-1347
2022-09-16 10:22:38 +02:00
340bc87110
Checkpoint: jam detection
2022-09-16 10:20:32 +02:00
d2bfe422f1
Separate runout and enabled settings
2022-09-16 10:17:04 +02:00
5484882758
Checkpoint after a lot of removal
2022-09-16 10:17:04 +02:00
f65e8ae5dd
Add MSG_ALWAYS
2022-09-14 11:33:24 +02:00
129b646c58
Fix MSG_ c=
...
Add MSG_ to messages.c/h
2022-09-14 11:33:24 +02:00
81238fbb15
Move MSG_PAUSED_THERMAL_ERROR outside TEMP_MODEL
...
MSG_PAUSED_THERMAL_ERROR is not specific to model-checking and can be
used also on MK25* variants.
2022-09-02 15:59:29 +02:00
f7ae3039f8
Don't include M851 in build if Auto Bed Leveling is not enabled
...
The variable cs.zprobe_zoffset is not used unless
auto bed leveling is enabled
2022-08-26 15:35:28 +00:00
19df196e1f
Better differentiation between pause/paused resume/resumed states
...
Use OCTOPRINT_ASK_* for the present form of actions. In these cases the
host will perform the pausing manouvers for us.
Use OCTOPRINT_* instead for the past tense forms when we are in charge.
Also always emit the action, whether we are or not sd-printing. This is
due to the new Stopped handling behaving correctly in either case.
2022-07-25 17:30:22 +02:00
b9fc73c4c3
TM: Pause the print and allow recovery from a thermal error
...
Do not allow resuming until all thermal and fan errors are clear.
Call the appropriate resume function when resuming a printing depending
on the saved_print state (is saved_print is available, then we always
need to resume from the saved state even when printing via usb).
Clear the Stopped state when resuming, so that commands can be accepted
again.
2022-07-25 17:30:22 +02:00
b3ca70a007
Show thermal warnings using the new LCD_MESSAGE_INFO priority
...
Add a new LCD_MESSAGE_INFO priority which can be overridden by regular
status updates, but only if a certain amount of time has passed.
Assign a time stamp to all message updates, so that the time since the
last update can be determined. Also switch the message type to Status,
so that the message always becomes visibile.
Always show status or info messages when printing via SD if the message
is recent enough.
2022-07-25 17:30:22 +02:00
e37435b53f
Merge remote-tracking branch 'upstream/MK3_3.11.1' into mk311_sync
2022-07-04 16:14:23 +02:00
85a5986e9e
Update `////MSG...` for `lang-add.sh`
2022-03-16 09:01:14 +01:00
45cd904520
Remove duplicate `Extruder fan:`
...
Create MSG in messages to reuse it
Remove `Nozzle FAN`
Change Support -> Extruder info -> fan speeds
2022-03-07 11:47:53 +01:00
bcd2b6f8bf
Remove `Choose filament` as it is a duplicate of `Select filament`
2022-03-07 11:47:53 +01:00
879803daa9
Temp. cal. -> PINDA cal.
...
01234567890123456789
Temp. cal. [Off] old
PINDA cal. [Off] new
Temp. cal. 1/6 old
PINDA cal. 1/6 new
MSG_TEMP_CALIBRATION -> MSG_PINDA_CALIBRATION
MSG_TEMP_CALIBRATION_DONE -> MSG_PINDA_CALIBRATION_DONE
Updated text
- MSG_PINDA_CALIBRATION_DONE
- MSG_PINDA_CAL_FAILED
Update status line during PINDA cal.
Changed PINDA cal. from submenu to function
- Deleted `lcd_pinda_calibration_menu()`
- Deleted `#MSG_CALIBRATE_PINDA c=17`
Tried to update translations
Updated po files
2022-03-07 11:47:52 +01:00
7939142922
Change `Choose extruder` to `Select extruder` for consistant wording
2022-03-07 11:47:52 +01:00
81d8c72cc4
Remove duplicate `Extruder fan:`
...
Create MSG in messages to reuse it
Remove `Nozzle FAN`
Change Support -> Extruder info -> fan speeds
2022-03-07 11:47:52 +01:00
4a73cad3fd
Remove `Choose filament` as it is a duplicate of `Select filament`
2022-03-07 11:47:52 +01:00
d06e74dd6f
Fix Welcome message and language flashing
2022-02-05 23:44:24 +01:00
d04ea859fb
Consolidate "Unknown X-Code" to save 16 bytes
2021-07-20 08:19:19 +02:00
686054b95e
Changed `x of 4` and `y of 9` to `x/4` and `y/4`
...
Added `Iteration` translation
2021-04-27 20:22:28 +02:00
b8ae08fd3d
Update `x of 4` and `x of 9` messages so longer text can be used.
2021-04-27 07:18:52 +02:00
1c09e8411d
Define #MSG_PINDA c=6 and remove duplicate saved 8 bytes
2021-03-30 19:30:26 +02:00
178fe36dc7
Create MSG_CANCEL c=9
...
Delete ">Cancel"
Samed 10 bytes
Updated MSG_MEASURED_OFFSET c=20
2021-03-20 06:30:26 +01:00
c1849f5cc2
Merge pull request #2405 from leptun/MK3_NEW_SD_COMPILATION
...
⚡ ️New SD menu
2021-03-03 11:45:04 +01:00
6d7d9089f7
Add defines and templates for community languages
...
Add `Community made` submenu to `Select language`
2021-03-01 08:22:43 +01:00
7faffa539a
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION
2021-02-26 09:48:46 +02:00
7b22895f23
Merge pull request #3032 from DRracer/service-prep2
...
Make a special welcome message for Shipping/Service prep.
2021-02-25 08:51:47 +01:00
734e497cd0
Move wizard msgs into messages.h/c + add more translation markers
2021-02-23 15:09:19 +01:00
3d-gussner
Guðni Már Gilbert
Yuri D'Elia
D.R.racer
Alex Voinea
DRracer