3e4592b7fd
Don't duplicate silent mode menu
...
Create a common function for the menu
This saves a lot of memory and 50 lines of code!
Change in memory:
Flash: -110 bytes
SRAM: 0 bytes
2023-04-04 14:47:45 +02:00
5be4504fea
Re-use G28 W string in PROGMEM
...
Change in memory:
Flash: -12 bytes
SRAM: 0 bytes
2023-03-27 18:14:28 +00:00
34ec1ff190
Merge pull request #4098 from gudnimg/PFW-1515
...
PFW-1515 Fix an issue with Thermal Anomaly message
2023-03-24 14:04:21 +01:00
6959b372ec
Merge pull request #4063 from gudnimg/PFW-1503
...
PFW-1503 Improve live Z babystep menu handling
2023-03-24 14:01:15 +01:00
b9103a113c
Merge pull request #4102 from 3d-gussner/MK3_fix_Hbed_MMULoadingTest
...
Fix HBed on Load for MMU Loading test
2023-03-24 13:59:58 +01:00
4feacfe822
Merge pull request #4093 from gudnimg/Restore-default-M701-M702-Z-lift
...
Restore previous Z-lift in M701/M702 + other PROGMEM optimisations
2023-03-24 13:59:47 +01:00
5536873eca
Fix HBed on Load for MMU Loading test
2023-03-22 09:50:59 +01:00
c5fc1168ed
PFW-1515 Fix an issue with Thermal Anomaly message
...
Issue introduced with PFW-1504
Change in memory:
Flash: +40 bytes
SRAM: 0 bytes
2023-03-20 20:35:49 +00:00
5ade1716bf
Add M500 into PROGMEM
...
Change in memory:
Flash: -6 bytes
SRAM: 0 bytes
2023-03-18 17:01:59 +00:00
466a6a8fc3
Add M600 into PROGMEM
...
Change in memory:
Flash: -10 bytes
SRAM: 0 bytes
2023-03-18 16:33:13 +00:00
129cc18cbf
Add M23 %s into PROGMEM
...
Change in memory:
Flash: -14 bytes
SRAM: 0 bytes
2023-03-18 16:18:05 +00:00
7c0ead7bc2
Add M24 into PROGMEM
...
Change in memory:
Flash: -8 bytes
SRAM: 0 bytes
2023-03-18 16:15:10 +00:00
5f8fc64a32
Restore previous Z-lift in M701/M702
...
Previously when the firmware called M701/M702 manually
there was no Z lift. But after we added support for the Z
parameter we set the default to 50mm.
Change strings "M701" to "M701 Z0" and "M702" to "M702 Z0"
to restore the previous behavior from before 3.13.
Also pulled the gcodes into PROGMEM in message.cpp
along with M83 and M84 to save memory.
Change in memory:
Flash: -34 bytes
SRAM: 0 bytes
2023-03-18 15:34:47 +00:00
e40d8ebbcc
Implement printJobOngoing()
...
This makes the if statments a little bit more readable
Change in memory:
Flash: -88 bytes
SRAM: 0 bytes
2023-03-18 12:18:43 +00:00
561d8599d2
PFW-1503 drop {} for consistency
2023-03-18 11:56:06 +00:00
09d918ce5d
PFW-1503 Change BABYSTEP_ALLOWED to babystep_allowed
...
I initially started with a preprocessor macro
called BABYSTEP_ALLOWED, but now it is a function.
It more common to use lower case for function names
2023-03-18 11:56:06 +00:00
bc2366cd8d
PFW-1503 Improve live Z babystep menu handling
...
Fixes an issue with running first layer calibration twice in a row.
Improvements:
Now the Z baby step menu closes automatically when first layer calibration is done.
No need to wait for a timeout or close the menu manually by setting a variable
If the baby stepping menu is open, and suddenly
the printer enters a state where baby stepping
is not allowed.
The printer will save the last value before closing the menu.
When LcdCommands != Idle, don't dismiss
the Z baby step menu. This saves 20B
Change in memory:
Flash: -130 bytes
SRAM: 0 bytes
2023-03-18 11:56:05 +00:00
5c010a3aaa
PFW-1509 Fix an issue with unload when nozzle is cold
...
Change in memory:
Flash: -2 bytes
SRAM: 0 bytes
2023-03-18 10:43:23 +00:00
e951a106d6
Messages fit to pages
2023-03-14 08:56:46 +01:00
22e70faa71
Remove `MMU2` and `MMU unit` messages
...
Saves 26byte of flash
Saves -368 byte in trasnlations
2023-03-14 08:30:15 +01:00
7676df88a4
Rename forgotten `MMU2` message to `MMU`
2023-03-14 08:30:03 +01:00
9721a87ef2
Raname `MMU2` message to `MMU` as everywhere
2023-03-14 08:24:50 +01:00
93598ef00d
Change some messages to be max three rows instead of two
...
Yes|No are now located at the 4th row and so messages can
use three rows. This should allow improvement in some translations.
2023-03-14 08:23:40 +01:00
bbfc4b9f78
PFW-1504 initial commit
...
Change in memory:
Flash: +162 bytes
SRAM: 0 bytes
2023-03-13 06:47:08 +01:00
04d440a9c8
Fix AutoLoad filament menu not shown when FSensor is [Off] ( #4072 )
...
Fix AutoLoad filament menu not shown when FSensor if [Off]
2023-03-10 14:23:56 +01:00
474d489c39
Merge pull request #4033 from gudnimg/improve-preheat-target
...
preheat: improve target temperature threshold
2023-03-03 14:41:58 +01:00
31bfbb4ed0
Merge pull request #4023 from DRracer/rename-eject-mmu
...
PFW-1497 Change Eject filament -> Eject from MMU
2023-02-23 10:48:35 +01:00
afc866e756
Merge pull request #4010 from gudnimg/improve-backlight-control
...
backlight: always allow backlight to dim/wake
2023-02-21 10:00:03 +01:00
36c6b323c4
Set `Is filament loaded? Yes|No` default to `No` without a timeout.
2023-02-20 16:31:23 +01:00
496b52b819
preheat: sync temperature threshold in M600 and Wizard
...
* M600 used 1°C threshold, which may increase the waiting time a bit
* Wizard used 3°C
Sync both to use TEMP_HYSTERESIS for consistancy
No change in memory footprint
2023-02-19 13:23:31 +00:00
6ad126ef0b
optimisation: preheat menu always uses integers for target temperature
...
Let's drop the float comparison since it not needed
Change in memory:
Flash : -16 bytes
SRAM: 0 bytes
2023-02-19 13:21:30 +00:00
319fec47f0
preheat: improve target temperature threshold
...
Use 5°C threshold to be consistant with other parts
of the firmware.
Relying on 95% of the target temperature creates
a dependency on the temperature:
PLA: Target = 215°C, threshold = 10.75°C
PETG: Target = 230°C, threshold = 11.5°C
ABS: Target = 255°C, threshold = 12.75°C
ASA: Target =260°C, threshold = 13.0°C
PC: Target = 275°C, threshold = 13.75°C
My proposal is we instead use a constant
TEMP_HYSTERESIS = 5, which is consistent with
M109, and behavior when restoring print from RAM
and some of the MMU code (like unload function)
Change in memory:
Flash: +2 bytes
SRAM: 0 bytes
2023-02-19 12:59:58 +00:00
db878c9996
backlight: always allow backlight to dim/wake
...
This commit adds the ability for the firmware to dim and wake the
backlight when LCD updates are disabled. Such as in the MMU error screen
or when rendering full screen messages which typically
disable the LCD updates to prevent the status screen from rendering.
Fixes #2777
Change in memory:
Flash: -26 bytes
SRAM: +1 byte
2023-02-18 17:08:35 +00:00
5cd60636f9
Add missing translations + shorten to 16 chars
2023-02-18 17:39:30 +01:00
98e7c15928
Change Eject filament -> Eject from MMU
...
PFW-1497
2023-02-18 17:39:30 +01:00
05662a5c0a
optimsation: reduce code size in LCD rendering
...
Change in memory (MK3S+ Multilang):
Flash: -62 bytes
SRAM: -6 bytes
2023-02-18 16:32:08 +01:00
620b19bbab
Roll up lay1cal_square loops
2023-02-17 14:30:20 +01:00
8129a14f19
Move layer calibration finish commands into first_layer_cal.cpp
2023-02-17 14:30:20 +01:00
568eec5ee0
Implement first layer cal with calculated extrusion widths
2023-02-17 14:30:20 +01:00
b63f5433df
Don't show Pause/Stop menus while processing T-codes
...
PFW-1449
Change in memory:
Flash: +18 bytes
SRAM: +1 bytes
2023-02-12 15:58:07 +01:00
504099bd6c
optimisation: reduce code size in rendering cursor
...
Change in memory:
Flash: -62 bytes
SRAM: 0 bytes
2023-02-11 19:06:14 +01:00
b02e8d9961
Fix First layer cal being stored without confirming with knob
2023-02-10 14:34:16 +01:00
ea7e717204
Cleanup: Remove various dead code
2023-02-10 08:17:36 +01:00
ca978080c4
Change to Thermal model
...
Add prusa.io/tm-cal link
and update all TM related translations
2023-02-08 15:36:59 +01:00
99761bdff7
optimisation: re-use adjust_bed_reset()
...
Move the code into eeprom.cpp since we're only working with EEPROM
Change in memory:
Flash: -42 bytes
SRAM: 0 bytes
2023-02-08 08:01:55 +01:00
b28aa6f42a
PFW-1471 Rename 'Toolchange count' to 'Material changes'
...
Added the string to our message so it can be translated
Change in memory:
Flash: -10 bytes
SRAM: 0 bytes
2023-02-06 08:33:40 +01:00
d66e2b66c2
Cleanup: use setTargetHotend consistently for one extruder
...
Main changes:
* setAllTargetHotends() is removed
* setTargetHotendSafe() is removed
* Extruder parameter on setTargetHotend() is dropped
Change in memory:
Flash: -192 bytes
SRAM: 0 bytes
2023-02-01 08:28:23 +01:00
da63d73585
optimisation: don't print floats with lcd_print()
...
Change in memory:
Flash: -442 bytes
SRAM: 0 bytes
2023-01-25 18:21:22 +00:00
17e6f1b75e
optimisation: remove conv2str.cpp
...
Change in memory:
Flash: -288 bytes
SRAM: -8 bytes
2023-01-25 06:28:00 +00:00
fab4165f4a
Merge pull request #3920 from wavexx/selftest_ok_alert
...
wizard: Do no set "Self test OK" as an alert message
2023-01-24 14:16:44 +01:00
Guðni Már Gilbert
3d-gussner
D.R.racer
Giles Bathgate