2ed3ee8410
Merge pull request #4280 from sarusani/DelayZAxisonAutoload
...
Delay Z-Axis on Autoload
2024-07-11 09:00:50 +02:00
695ba5d5db
Fix String substitution when `DEV` flavour is built with a dirty local version both instances of -D were replaced with commit count
2024-07-09 15:44:40 +01:00
f687fe3e2e
Fix MK2.5/S builds on Windows
2024-07-09 16:07:02 +02:00
d769fcc094
Workaround for Windows/Mac wildcard issue
...
Only zip MK2.5/S and E3DREVO on Linux
2024-07-09 15:43:52 +02:00
99e306f4a3
MMU: minor formatting sync
2024-07-06 17:24:40 +00:00
d548bb68fd
MMU: revert WaitForHotendTargetTempBeep(); position in code
...
The 8-bit FW uses a different Fullscreen UI which doesn't show the current temperature. So, for now, keep calling WaitForHotendTargetTempBeep before showing the full-screen message.
2024-07-06 16:55:32 +00:00
09f1d85e9c
MMU: Revert changes to execute_extruder_sequence loop
...
The previous for-loop is more memory efficient and saves 20 bytes of Flash
2024-07-06 16:55:32 +00:00
61b4270129
MMU: allow inlining UInt16ToHex
...
Saves 22 bytes of Flash
2024-07-06 16:55:32 +00:00
592fc56bfc
MMU: Sync code with 32-bit
...
The changes in this commit are mainly formatting
But there are some changes like adding a new function planner_draining()
2024-07-06 16:55:32 +00:00
5efae44eb7
Delay Z-Axis on Autoload
...
Delay z-axis movement when the operators hand is close to the printhead.
2024-07-05 16:12:07 +02:00
72ffc28952
Add build.py
2024-07-05 09:06:22 +02:00
e405e9140c
Merge pull request #4687 from 3d-gussner/MK3_Replace_hard_coded_values_1
...
Replace hardcoded values
2024-07-05 07:54:07 +02:00
bc48d34a2f
Replace hradecoded XYZ Z correction value with Z_MAX_POS_XYZ_CALIBRATION_CORRECTION
2024-07-04 10:12:38 +02:00
152b290d1d
Merge pull request #4689 from 3d-gussner/MK3_PFW-964
...
PFW-964: Skip filament unload/load after Shipping factory reset
2024-07-03 13:20:49 +02:00
3c7ae1e9fc
Merge pull request #4690 from 3d-gussner/MK3_Documentation
...
Update doxygen documentation remove white spaces
2024-05-30 14:43:29 +02:00
ac63fafc33
Merge pull request #4696 from 3d-gussner/MK3_Fix_cmake_MK25S_build
...
Fix cmake build of MK2.5 and MK25S
2024-05-30 14:42:13 +02:00
db64997687
Add `${FW_LANG_PATCH}.bin` to DEPENDS
2024-05-30 08:21:51 +02:00
827c3025a4
Fix cmake build of MK2.5 and MK25S
2024-05-29 18:01:53 +02:00
45a223a1f9
Remove White spaces
2024-05-20 19:09:03 +02:00
e110153ee2
Cleanup doxgen documentation and white spaces
2024-05-20 18:35:09 +02:00
9a56f1e4c1
Skip filament unload/load after Shipping factory reset
...
when MMU is enabled. With MMU enabled no filament should be
loaded while idle.
2024-05-16 12:48:49 +02:00
eaeb722adb
Merge pull request #4681 from gudnimg/add-workaround-for-tune-button
...
MMU: Add workaround for broken Tune button
2024-05-06 12:50:41 +02:00
6f915ee401
MMU: Add workaround for broken Tune button
...
If the MMU is processing a command, the Tune button can't be executed.
Change in memory:
Flash: +16 bytes
SRAM: 0 bytes
2024-05-04 00:22:17 +00:00
abdee5b7f3
Merge pull request #4679 from 3d-gussner/MK3_Crash_detect_raise_z
...
Replace hard coded crash z lift value with Pause Z lift value.
2024-05-03 08:08:48 +02:00
08d26fdee2
Replace hard coded crash z lift value with Z lift value.
...
With `M125 Z<value>` you can set the Z lift value via gcode as requested.
Fixes #3419
2024-05-02 11:37:13 +02:00
28502a2b6e
optimisation: remove 1 more call to __divsf3
...
Changing (feedrate * feedmultiply) / 6000.f
to (feedrate * feedmultiply) * (1.f / 6000.f)
Replaces the call to __divsf3 with __mulsf3 which is better
No change in memory
2024-04-23 09:18:45 +02:00
2c46e1b344
optimisation: remove 3 calls to __divsf3
...
Change in memory:
Flash: -34 bytes
SRAM: 0 bytes
2024-04-23 09:18:45 +02:00
d22245b482
Merge pull request #4658 from 3d-gussner/MK3_PFW-762_Ambient_shutdown_80C
...
PFW-762 ambient shutdown at 80 C
2024-04-19 15:06:03 +02:00
e8d55486fe
Merge pull request #4661 from gudnimg/PFW-1557
...
PFW-1557 MMU: Improve unload handling when print is aborted
2024-04-15 15:13:09 +02:00
6e40fe05fc
Merge pull request #4657 from 3d-gussner/MK3_PP_ACCEL_JERK
...
Add max acceleration mm per s2, feedrates and jerk save and restor du…
2024-04-15 15:11:57 +02:00
34591f0465
Merge pull request #4663 from 3d-gussner/MK3_Fix_Autoreport
...
Fix Autoreport
2024-04-15 15:06:12 +02:00
51b119a3ec
Fix Autoreport broken in 3957dc91aa
2024-04-15 12:09:43 +02:00
1292a82f70
Fix typos
2024-04-15 07:45:36 +02:00
f50e754f26
Use of `eeprom_update_block_notify` and `eeprom_read_block` reduces the flash usage a lot.
...
Thanks to @gudnimg
2024-04-15 07:45:36 +02:00
5c0e014215
Add max acceleration mm per s2, feedrates and jerk save and restor during power panic
...
Thanks to @wavexx in #2456
2024-04-15 07:45:36 +02:00
16dfcfeb9a
MMU: Improve unload handling when print is aborted
...
- Don't allow re-heating the nozzle or the MMU to unload the filament if the print was aborted by a temperature error
- Allow MMU to unload filament if there is no temperature error, and there is no fan error when Fan check is enabled
- When Fan check is disabled, the MMU may unload if there is no temperature error
Change in memory:
Flash: +14 bytes
SRAM: 0 bytes
PFW-1557
2024-04-14 12:07:56 +00:00
52ac95f082
Merge pull request #4600 from sarusani/ChangeRevoNozzleChangeMenu
...
Adjust Nozzle Change Menu For Quick Change Nozzles
2024-04-11 19:19:01 +02:00
361ce65e5c
Merge pull request #4644 from sarusani/AddEjectToFilamentLoadMSG
...
Add Eject Option To Filament Load Message
2024-04-11 19:18:42 +02:00
36282aae1b
Change Ambient board thermistor safety shutdown to 80 C
2024-04-10 17:56:26 +02:00
5b96ff6d37
Merge pull request #4656 from 3d-gussner/MK3_PP_EXT_MINTEMP
...
Add Extrude mintemp save and restore during power panic
2024-04-09 18:44:47 +02:00
bc04f16906
Adjust Nozzle Change Menu For Quick Change Nozzles
...
- Show warning if extruder temp is > 40 degrees
- Use fan to speed up cooldown
- Show confirmation msg
- Show nozzle diameter setting after nozzle change
2024-04-09 16:12:46 +02:00
bd935db31e
Add Eject Option To Filament Load Message
2024-04-09 15:50:17 +02:00
e5d504b855
Add Extrude mintemp save and restore during power panic
...
Thanks to @wavexx in #3008
2024-04-09 09:34:24 +02:00
02822c59ad
Merge pull request #4591 from gudnimg/cleanup_cancel_heatup
...
Remove redundant ` cancel_heatup` assignment
2024-04-09 08:17:09 +02:00
fbbcdd0808
Merge pull request #4613 from gudnimg/optimise-axis_ustep_resolution
...
optimisation: initialise `axis_ustep_resolution` in EEPROM
2024-04-08 16:13:52 +02:00
022eaa1820
Merge pull request #4645 from gudnimg/full-screen-code-duplicate
...
ultralcd: merge two functions into one as cleanup
2024-04-06 13:50:48 +00:00
ed9d7f3ac1
ultralcd: merge two functions into one
...
lcd_show_fullscreen_message_yes_no_and_wait_P and lcd_show_multiscreen_message_yes_no_and_wait_P
are the same function. Let's drop one of them so we only have one symbol for the function.
No change in memory
Fix rebase
2024-04-05 19:33:15 +02:00
a4a7b09fe7
Merge pull request #4651 from 3d-gussner/MK3_Fix_Insert_filament_fr_hu
...
Fix issue Insert filament ... message in French and Hungarian
2024-04-04 09:20:48 +02:00
c515038e7d
Merge pull request #4650 from 3d-gussner/MK3_LCD_Menu_cleanup
...
LCD_Menu_cleanup
2024-04-04 09:19:50 +02:00
feebac54fc
Fix issue #4424
...
Fix rebase
2024-04-04 09:08:44 +02:00
3d-gussner
lselter
gudnimg
sarusani
sarusani