ff16bfd8fa
Merge pull request #4739 from gudnimg/prune-disabled-code
...
Remove a bit of unused code which is disabled at compile time
2024-08-03 10:34:40 +00:00
23f92b24b8
Merge pull request #4735 from gudnimg/cleanup-dead-variable
...
Remove commented variable `load_filament_time`
2024-08-02 16:10:17 +00:00
04a7175cc7
Remove LARGE_FLASH preprocessor symbol
...
It's not very useful as is ... probably remnant from Marlin 1
2024-07-31 12:06:35 +00:00
81f1ec4975
Remove unused messages
2024-07-31 11:57:49 +00:00
0d45228dbd
Remove commented lcd_update_enable(true)
2024-07-31 11:15:39 +00:00
396a8ca4f9
Remove VT100 code
2024-07-31 10:35:18 +00:00
eb7969441a
Remove Servo..h/cpp
2024-07-31 10:31:05 +00:00
2cbbdbacd5
Remove a bit of unused code which is disabled at compile time
...
Some of these have been used > 6 years and don't compile anymore.
Reason to want this removed is just to reduce the code we maintain
2024-07-31 09:53:45 +00:00
d485e4fb0b
Add type to save 50B
...
Saves 50bytes
2024-07-30 15:15:05 +02:00
bb1bb4d717
Remove commented variable load_filament_time
2024-07-28 17:41:23 +00:00
8382815110
Fix inconsistent indendation in mFilamentPrompt()
2024-07-26 11:55:32 +00:00
faa01b5a5f
Fix an issue where mFilamentPrompt menu times out
...
Fixes a regression introduced in 3.13.0 here: a7e9ccfb57 (diff-5fbfdca43c192573e31d8e78d255c510fb6e213b118cf38173277ec2a2163880R7462)
2024-07-26 11:52:20 +00:00
3722a17e5a
Merge pull request #4647 from gudnimg/mmu-sync-april
...
MMU maintenance: Sync with 32-bit FW a little bit
2024-07-24 10:02:24 +02:00
4dc9fd4972
MMU: revert fallthrough in LogicStep
2024-07-23 15:55:47 +00:00
a7004cd067
Fix an issue in manual fan check where prior knob clicks are not consumed
2024-07-15 13:52:30 +00:00
99e306f4a3
MMU: minor formatting sync
2024-07-06 17:24:40 +00:00
d548bb68fd
MMU: revert WaitForHotendTargetTempBeep(); position in code
...
The 8-bit FW uses a different Fullscreen UI which doesn't show the current temperature. So, for now, keep calling WaitForHotendTargetTempBeep before showing the full-screen message.
2024-07-06 16:55:32 +00:00
09f1d85e9c
MMU: Revert changes to execute_extruder_sequence loop
...
The previous for-loop is more memory efficient and saves 20 bytes of Flash
2024-07-06 16:55:32 +00:00
61b4270129
MMU: allow inlining UInt16ToHex
...
Saves 22 bytes of Flash
2024-07-06 16:55:32 +00:00
592fc56bfc
MMU: Sync code with 32-bit
...
The changes in this commit are mainly formatting
But there are some changes like adding a new function planner_draining()
2024-07-06 16:55:32 +00:00
5efae44eb7
Delay Z-Axis on Autoload
...
Delay z-axis movement when the operators hand is close to the printhead.
2024-07-05 16:12:07 +02:00
bc48d34a2f
Replace hradecoded XYZ Z correction value with Z_MAX_POS_XYZ_CALIBRATION_CORRECTION
2024-07-04 10:12:38 +02:00
152b290d1d
Merge pull request #4689 from 3d-gussner/MK3_PFW-964
...
PFW-964: Skip filament unload/load after Shipping factory reset
2024-07-03 13:20:49 +02:00
45a223a1f9
Remove White spaces
2024-05-20 19:09:03 +02:00
e110153ee2
Cleanup doxgen documentation and white spaces
2024-05-20 18:35:09 +02:00
9a56f1e4c1
Skip filament unload/load after Shipping factory reset
...
when MMU is enabled. With MMU enabled no filament should be
loaded while idle.
2024-05-16 12:48:49 +02:00
6f915ee401
MMU: Add workaround for broken Tune button
...
If the MMU is processing a command, the Tune button can't be executed.
Change in memory:
Flash: +16 bytes
SRAM: 0 bytes
2024-05-04 00:22:17 +00:00
08d26fdee2
Replace hard coded crash z lift value with Z lift value.
...
With `M125 Z<value>` you can set the Z lift value via gcode as requested.
Fixes #3419
2024-05-02 11:37:13 +02:00
28502a2b6e
optimisation: remove 1 more call to __divsf3
...
Changing (feedrate * feedmultiply) / 6000.f
to (feedrate * feedmultiply) * (1.f / 6000.f)
Replaces the call to __divsf3 with __mulsf3 which is better
No change in memory
2024-04-23 09:18:45 +02:00
2c46e1b344
optimisation: remove 3 calls to __divsf3
...
Change in memory:
Flash: -34 bytes
SRAM: 0 bytes
2024-04-23 09:18:45 +02:00
d22245b482
Merge pull request #4658 from 3d-gussner/MK3_PFW-762_Ambient_shutdown_80C
...
PFW-762 ambient shutdown at 80 C
2024-04-19 15:06:03 +02:00
e8d55486fe
Merge pull request #4661 from gudnimg/PFW-1557
...
PFW-1557 MMU: Improve unload handling when print is aborted
2024-04-15 15:13:09 +02:00
6e40fe05fc
Merge pull request #4657 from 3d-gussner/MK3_PP_ACCEL_JERK
...
Add max acceleration mm per s2, feedrates and jerk save and restor du…
2024-04-15 15:11:57 +02:00
51b119a3ec
Fix Autoreport broken in 3957dc91aa
2024-04-15 12:09:43 +02:00
1292a82f70
Fix typos
2024-04-15 07:45:36 +02:00
f50e754f26
Use of `eeprom_update_block_notify` and `eeprom_read_block` reduces the flash usage a lot.
...
Thanks to @gudnimg
2024-04-15 07:45:36 +02:00
5c0e014215
Add max acceleration mm per s2, feedrates and jerk save and restor during power panic
...
Thanks to @wavexx in #2456
2024-04-15 07:45:36 +02:00
16dfcfeb9a
MMU: Improve unload handling when print is aborted
...
- Don't allow re-heating the nozzle or the MMU to unload the filament if the print was aborted by a temperature error
- Allow MMU to unload filament if there is no temperature error, and there is no fan error when Fan check is enabled
- When Fan check is disabled, the MMU may unload if there is no temperature error
Change in memory:
Flash: +14 bytes
SRAM: 0 bytes
PFW-1557
2024-04-14 12:07:56 +00:00
52ac95f082
Merge pull request #4600 from sarusani/ChangeRevoNozzleChangeMenu
...
Adjust Nozzle Change Menu For Quick Change Nozzles
2024-04-11 19:19:01 +02:00
361ce65e5c
Merge pull request #4644 from sarusani/AddEjectToFilamentLoadMSG
...
Add Eject Option To Filament Load Message
2024-04-11 19:18:42 +02:00
36282aae1b
Change Ambient board thermistor safety shutdown to 80 C
2024-04-10 17:56:26 +02:00
bc04f16906
Adjust Nozzle Change Menu For Quick Change Nozzles
...
- Show warning if extruder temp is > 40 degrees
- Use fan to speed up cooldown
- Show confirmation msg
- Show nozzle diameter setting after nozzle change
2024-04-09 16:12:46 +02:00
bd935db31e
Add Eject Option To Filament Load Message
2024-04-09 15:50:17 +02:00
e5d504b855
Add Extrude mintemp save and restore during power panic
...
Thanks to @wavexx in #3008
2024-04-09 09:34:24 +02:00
02822c59ad
Merge pull request #4591 from gudnimg/cleanup_cancel_heatup
...
Remove redundant ` cancel_heatup` assignment
2024-04-09 08:17:09 +02:00
fbbcdd0808
Merge pull request #4613 from gudnimg/optimise-axis_ustep_resolution
...
optimisation: initialise `axis_ustep_resolution` in EEPROM
2024-04-08 16:13:52 +02:00
ed9d7f3ac1
ultralcd: merge two functions into one
...
lcd_show_fullscreen_message_yes_no_and_wait_P and lcd_show_multiscreen_message_yes_no_and_wait_P
are the same function. Let's drop one of them so we only have one symbol for the function.
No change in memory
Fix rebase
2024-04-05 19:33:15 +02:00
a4a7b09fe7
Merge pull request #4651 from 3d-gussner/MK3_Fix_Insert_filament_fr_hu
...
Fix issue Insert filament ... message in French and Hungarian
2024-04-04 09:20:48 +02:00
feebac54fc
Fix issue #4424
...
Fix rebase
2024-04-04 09:08:44 +02:00
b3a410abdc
Fix #3361
2024-04-04 09:04:48 +02:00
Guðni Már Gilbert
sarusani
3d-gussner
sarusani