Merge pull request #4358 from 3d-gussner/MK3_3131_fix_Z_crash

Fix Z crash and update to 3.13.1

.github/travis/legacy-build.sh

@@ -23,4 +23,8 @@ cp Firmware/variants/1_75mm_MK3S-EINSy10a-E3DREVO.h Firmware/Configuration_prusa
 bash -x build.sh || { echo "1_75mm_MK3S-EINSy10a-E3DREVO variant failed" && false; }
 cp Firmware/variants/1_75mm_MK3-EINSy10a-E3DREVO.h Firmware/Configuration_prusa.h
 bash -x build.sh || { echo "1_75mm_MK3-EINSy10a-E3DREVO variant failed" && false; }
+cp Firmware/variants/1_75mm_MK3S-EINSy10a-E3DREVO_HF_60W.h Firmware/Configuration_prusa.h
+bash -x build.sh || { echo "1_75mm_MK3S-EINSy10a-E3DREVO_HF_60W variant failed" && false; }
+cp Firmware/variants/1_75mm_MK3-EINSy10a-E3DREVO_HF_60W.h Firmware/Configuration_prusa.h
+bash -x build.sh || { echo "1_75mm_MK3-EINSy10a-E3DREVO_HF_60W variant failed" && false; }
 rm Firmware/Configuration_prusa.h

Firmware/Configuration.h

@@ -15,16 +15,16 @@ extern const char _sPrinterMmuName[] PROGMEM;
 // Firmware version
 #define FW_MAJOR 3
 #define FW_MINOR 13
-#define FW_REVISION 0
-#define FW_FLAVOR RC      //uncomment if DEBUG, DEVEL, ALPHA, BETA or RC
-#define FW_FLAVERSION 1     //uncomment if FW_FLAVOR is defined and versioning is needed. Limited to max 8.
+#define FW_REVISION 1
+//#define FW_FLAVOR RC      //uncomment if DEBUG, DEVEL, ALPHA, BETA or RC
+//#define FW_FLAVERSION 1     //uncomment if FW_FLAVOR is defined and versioning is needed. Limited to max 8.
 #ifndef FW_FLAVOR
     #define FW_VERSION STR(FW_MAJOR) "." STR(FW_MINOR) "." STR(FW_REVISION)
 #else
     #define FW_VERSION STR(FW_MAJOR) "." STR(FW_MINOR) "." STR(FW_REVISION) "-" STR(FW_FLAVOR) "" STR(FW_FLAVERSION)
 #endif
 
-#define FW_COMMIT_NR 6853
+#define FW_COMMIT_NR 6876
 
 // FW_VERSION_UNKNOWN means this is an unofficial build.
 // The firmware should only be checked into github with this symbol.

Firmware/Marlin_main.cpp

@@ -7921,9 +7921,11 @@ Sigma_Exit:
       - MK2.5SMMU2S (20252)
       - MK3         (300)
       - MK3MMU2     (20300)
+      - MK3MMU3     (30300)
       - MK3S        (302)
       - MK3SMMU2S   (20302)
-	
+      - MK3SMMU3    (30302)
+
     */
     case 862: // M862: print checking
     {
@@ -8421,7 +8423,7 @@ Sigma_Exit:
     break;
 
     /*!
-    ### M704 - Load to MMU <a href="https://reprap.org/wiki/G-code#M704:_Load_to_MMU">M704: Load to MMU</a>
+    ### M704 - Preload to MMU <a href="https://reprap.org/wiki/G-code#M704:_Preload_to_MMU">M704: Preload to MMU</a>
     #### Usage
 
         M704 [ P ]

Firmware/eeprom.h

@@ -201,8 +201,10 @@ static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEP
 | ^           | ^       | ^                                     | 1c 4fh 20252 | ^                     | PRINTER_MK2.5S with MMU2S                         | ???          | ^
 | ^           | ^       | ^                                     | 2c 01h 300   | ^                     | PRINTER_MK3                                       | ???          | ^
 | ^           | ^       | ^                                     | 4c 4fh 20300 | ^                     | PRINTER_MK3 with MMU2                             | ???          | ^
+| ^           | ^       | ^                                     | 5c 76h 30300 | ^                     | PRINTER_MK3 with MMU3                             | ???          | ^
 | ^           | ^       | ^                                     | 2e 01h 302   | ^                     | PRINTER_MK3S                                      | ???          | ^
 | ^           | ^       | ^                                     | 4e 4fh 20302 | ^                     | PRINTER_MK3S with MMU2S                           | ???          | ^
+| ^           | ^       | ^                                     | 5e 76h 30302 | ^                     | PRINTER_MK3S with MMU3                            | ???          | ^
 | 0x0EEC 3820 | uint16  | EEPROM_BOARD_TYPE                     | ???          | ff ffh 65535          | Board Type                                        | ???          | D3 Ax0eec C2
 | ^           | ^       | ^                                     | c8 00h 200   | ^                     | BOARD_RAMBO_MINI_1_0                              | ???          | ^
 | ^           | ^       | ^                                     | cb 00h 203   | ^                     | BOARD_RAMBO_MINI_1_3                              | ???          | ^

Firmware/mesh_bed_calibration.cpp

@@ -2790,16 +2790,22 @@ canceled:
 #endif //NEW_XYZCAL
 
 bool sample_z() {
-	bool sampled = true;
-	//make space
-	raise_z(150);
-	lcd_show_fullscreen_message_and_wait_P(_T(MSG_PLACE_STEEL_SHEET));
+    bool sampled = true;
+    // make some space for the sheet
+    // Avoid calling raise_z(), because a false triggering stallguard may prevent the Z from moving.
+    // The extruder then may ram the sheet hard if not going down from some ~150mm height
+    current_position[Z_AXIS] = 0.F;
+    destination[Z_AXIS] = 150.F;
+    plan_buffer_line_destinationXYZE(homing_feedrate[Z_AXIS] / 60);
 
-	// Sample Z heights for the mesh bed leveling.
-	// In addition, store the results into an eeprom, to be used later for verification of the bed leveling process.
-	if (!sample_mesh_and_store_reference()) sampled = false;
+    lcd_show_fullscreen_message_and_wait_P(_T(MSG_PLACE_STEEL_SHEET));
 
-	return sampled;
+    // Sample Z heights for the mesh bed leveling.
+    // In addition, store the results into an eeprom, to be used later for verification of the bed leveling process.
+    if (!sample_mesh_and_store_reference())
+        sampled = false;
+
+    return sampled;
 }
 
 void go_home_with_z_lift()

Firmware/mmu2.cpp

@@ -722,7 +722,7 @@ void MMU2::CheckUserInput() {
             break;
         }
         break;
-    case RestartMMU:
+    case ResetMMU:
         Reset(ResetPin); // we cannot do power cycle on the MK3
         // ... but mmu2_power.cpp knows this and triggers a soft-reset instead.
         break;

Firmware/mmu2/buttons.h

@@ -13,7 +13,7 @@ enum class ButtonOperations : uint8_t {
     NoOperation = 0,
     Retry       = 1,
     Continue    = 2,
-    RestartMMU  = 3,
+    ResetMMU  = 3,
     Unload      = 4,
     StopPrint   = 5,
     DisableMMU  = 6,
@@ -26,7 +26,7 @@ enum Buttons : uint8_t {
     Left,
     
     // performed on the printer's side
-    RestartMMU,
+    ResetMMU,
     StopPrint,
     DisableMMU,
     

Firmware/mmu2/check-pce.sh

@@ -0,0 +1,55 @@
+#!/bin/bash
+
+# download Prusa Error Codes for MMU 
+#wget https://raw.githubusercontent.com/3d-gussner/Prusa-Error-Codes/master/04_MMU/error-codes.yaml --output-document=error-codes.yaml
+wget https://raw.githubusercontent.com/prusa3d/Prusa-Error-Codes/master/04_MMU/error-codes.yaml --output-document=error-codes.yaml
+
+oifs="$IFS"  ## save original IFS
+IFS=$'\n'    ## set IFS to break on newline
+codes=($(cat error-codes.yaml |grep "code:" |cut -d '"' -f2))
+titles=($(cat error-codes.yaml |grep 'title:' |cut -d '"' -f2))
+texts=($(cat error-codes.yaml |grep "text:" |cut -d '"' -f2))
+actions=($(cat error-codes.yaml |grep "action:" |cut -d ':' -f2))
+ids=($(cat error-codes.yaml |grep "id:" |cut -d '"' -f2))
+IFS="$oifs"  ## restore original IFS
+
+filename=errors_list.h
+
+clear
+for ((i = 0; i < ${#codes[@]}; i++)) do
+  code=${codes[i]}
+  id=$(cat $filename |grep "${code#04*}" | cut -d "=" -f1 | cut -d "_" -f3- |cut -d " " -f1)
+  title=$(cat $filename |grep "${id}" |grep --max-count=1 "MSG_TITLE" |cut -d '"' -f2)
+  text=$(cat $filename |grep "${id}" |grep --max-count=1 "MSG_DESC" |cut -d '"' -f2)
+  action1=$(cat $filename |grep "),//$id"| cut -d "," -f1)
+  action2=$(cat $filename |grep "),//$id"| cut -d "," -f2)
+  action1=$(echo $action1 | cut -d ":" -f2- |cut -d ":" -f2)
+  action2=$(echo $action2 | cut -d ":" -f2- |cut -d ":" -f2 |cut -d ")" -f1)
+  if [ "$action2" == "NoOperation" ]; then
+  action=" [$action1]"
+  else
+  action=" [$action1,$action2]"
+  fi
+  echo -n "code: $code |"
+  if [ "$id" != "${ids[i]}" ]; then
+    echo -n "$(tput setaf 1) $id $(tput sgr0) # $(tput setaf 2)${ids[i]}$(tput sgr0)|"
+  else
+    echo -n " $id |"
+  fi
+  if [ "$title" != "${titles[i]}" ]; then
+    echo -n "$(tput setaf 1) $title $(tput sgr0) # $(tput setaf 2)${titles[i]}$(tput sgr0)|"
+  else
+    echo -n " $title |"
+  fi
+  if [ "$text" != "${texts[i]}" ]; then
+    echo -n "$(tput setaf 1) $text $(tput sgr0) # $(tput setaf 2)${texts[i]}$(tput sgr0)|"
+  else
+    echo -n " $text |"
+  fi
+  if [ "$action" != "${actions[i]}" ]; then
+    echo -n "$(tput setaf 1) $action $(tput sgr0) # $(tput setaf 2)${actions[i]}$(tput sgr0)|"
+  else
+    echo -n " $action |"
+  fi
+  echo
+done

Firmware/mmu2/errors_list.h

@@ -18,9 +18,9 @@ typedef enum : uint16_t {
 
     ERR_MECHANICAL = 100,
     ERR_MECHANICAL_FINDA_DIDNT_TRIGGER = 101,
-    ERR_MECHANICAL_FINDA_DIDNT_GO_OFF = 102,
+    ERR_MECHANICAL_FINDA_FILAMENT_STUCK = 102,
     ERR_MECHANICAL_FSENSOR_DIDNT_TRIGGER = 103,
-    ERR_MECHANICAL_FSENSOR_DIDNT_GO_OFF = 104,
+    ERR_MECHANICAL_FSENSOR_FILAMENT_STUCK = 104,
 
     ERR_MECHANICAL_PULLEY_CANNOT_MOVE = 105,
     ERR_MECHANICAL_FSENSOR_TOO_EARLY = 106,
@@ -32,37 +32,37 @@ typedef enum : uint16_t {
     ERR_MECHANICAL_IDLER_CANNOT_MOVE = 126,
 
     ERR_TEMPERATURE = 200,
-    ERR_TEMPERATURE_PULLEY_WARNING_TMC_TOO_HOT = 201,
-    ERR_TEMPERATURE_SELECTOR_WARNING_TMC_TOO_HOT = 211,
-    ERR_TEMPERATURE_IDLER_WARNING_TMC_TOO_HOT = 221,
+    ERR_TEMPERATURE_WARNING_TMC_PULLEY_TOO_HOT = 201,
+    ERR_TEMPERATURE_WARNING_TMC_SELECTOR_TOO_HOT = 211,
+    ERR_TEMPERATURE_WARNING_TMC_IDLER_TOO_HOT = 221,
 
-    ERR_TEMPERATURE_PULLEY_TMC_OVERHEAT_ERROR = 202,
-    ERR_TEMPERATURE_SELECTOR_TMC_OVERHEAT_ERROR = 212,
-    ERR_TEMPERATURE_IDLER_TMC_OVERHEAT_ERROR = 222,
+    ERR_TEMPERATURE_TMC_PULLEY_OVERHEAT_ERROR = 202,
+    ERR_TEMPERATURE_TMC_SELECTOR_OVERHEAT_ERROR = 212,
+    ERR_TEMPERATURE_TMC_IDLER_OVERHEAT_ERROR = 222,
 
 
     ERR_ELECTRICAL = 300,
-    ERR_ELECTRICAL_PULLEY_TMC_DRIVER_ERROR = 301,
-    ERR_ELECTRICAL_SELECTOR_TMC_DRIVER_ERROR = 311,
-    ERR_ELECTRICAL_IDLER_TMC_DRIVER_ERROR = 321,
+    ERR_ELECTRICAL_TMC_PULLEY_DRIVER_ERROR = 301,
+    ERR_ELECTRICAL_TMC_SELECTOR_DRIVER_ERROR = 311,
+    ERR_ELECTRICAL_TMC_IDLER_DRIVER_ERROR = 321,
 
-    ERR_ELECTRICAL_PULLEY_TMC_DRIVER_RESET = 302,
-    ERR_ELECTRICAL_SELECTOR_TMC_DRIVER_RESET = 312,
-    ERR_ELECTRICAL_IDLER_TMC_DRIVER_RESET = 322,
+    ERR_ELECTRICAL_TMC_PULLEY_DRIVER_RESET = 302,
+    ERR_ELECTRICAL_TMC_SELECTOR_DRIVER_RESET = 312,
+    ERR_ELECTRICAL_TMC_IDLER_DRIVER_RESET = 322,
 
-    ERR_ELECTRICAL_PULLEY_TMC_UNDERVOLTAGE_ERROR = 303,
-    ERR_ELECTRICAL_SELECTOR_TMC_UNDERVOLTAGE_ERROR = 313,
-    ERR_ELECTRICAL_IDLER_TMC_UNDERVOLTAGE_ERROR = 323,
+    ERR_ELECTRICAL_TMC_PULLEY_UNDERVOLTAGE_ERROR = 303,
+    ERR_ELECTRICAL_TMC_SELECTOR_UNDERVOLTAGE_ERROR = 313,
+    ERR_ELECTRICAL_TMC_IDLER_UNDERVOLTAGE_ERROR = 323,
 
-    ERR_ELECTRICAL_PULLEY_TMC_DRIVER_SHORTED = 304,
-    ERR_ELECTRICAL_SELECTOR_TMC_DRIVER_SHORTED = 314,
-    ERR_ELECTRICAL_IDLER_TMC_DRIVER_SHORTED = 324,
+    ERR_ELECTRICAL_TMC_PULLEY_DRIVER_SHORTED = 304,
+    ERR_ELECTRICAL_TMC_SELECTOR_DRIVER_SHORTED = 314,
+    ERR_ELECTRICAL_TMC_IDLER_DRIVER_SHORTED = 324,
 
-    ERR_ELECTRICAL_PULLEY_SELFTEST_FAILED = 305,
-    ERR_ELECTRICAL_SELECTOR_SELFTEST_FAILED = 315,
-    ERR_ELECTRICAL_IDLER_SELFTEST_FAILED = 325,
+    ERR_ELECTRICAL_MMU_PULLEY_SELFTEST_FAILED = 305,
+    ERR_ELECTRICAL_MMU_SELECTOR_SELFTEST_FAILED = 315,
+    ERR_ELECTRICAL_MMU_IDLER_SELFTEST_FAILED = 325,
 
-    ERR_ELECTRICAL_MCU_UNDERVOLTAGE_VCC = 306,
+    ERR_ELECTRICAL_MMU_MCU_ERROR = 306,
 
     ERR_CONNECT = 400,
     ERR_CONNECT_MMU_NOT_RESPONDING = 401,
@@ -78,7 +78,7 @@ typedef enum : uint16_t {
     ERR_SYSTEM_UNLOAD_MANUALLY = 506,
     ERR_SYSTEM_FILAMENT_EJECTED = 507,
 
-    ERR_OTHER = 900
+    ERR_OTHER_UNKNOWN_ERROR = 900
 } err_num_t;
 
 // Avr gcc has serious trouble understanding static data structures in PROGMEM
@@ -87,9 +87,9 @@ typedef enum : uint16_t {
 // it really makes no difference if there are "nice" data structures or plain arrays.
 static const constexpr uint16_t errorCodes[] PROGMEM = {
     ERR_MECHANICAL_FINDA_DIDNT_TRIGGER,
-    ERR_MECHANICAL_FINDA_DIDNT_GO_OFF,
+    ERR_MECHANICAL_FINDA_FILAMENT_STUCK,
     ERR_MECHANICAL_FSENSOR_DIDNT_TRIGGER,
-    ERR_MECHANICAL_FSENSOR_DIDNT_GO_OFF,
+    ERR_MECHANICAL_FSENSOR_FILAMENT_STUCK,
     ERR_MECHANICAL_PULLEY_CANNOT_MOVE,
     ERR_MECHANICAL_FSENSOR_TOO_EARLY,
     ERR_MECHANICAL_INSPECT_FINDA,
@@ -98,28 +98,28 @@ static const constexpr uint16_t errorCodes[] PROGMEM = {
     ERR_MECHANICAL_SELECTOR_CANNOT_MOVE,
     ERR_MECHANICAL_IDLER_CANNOT_HOME,
     ERR_MECHANICAL_IDLER_CANNOT_MOVE,
-    ERR_TEMPERATURE_PULLEY_WARNING_TMC_TOO_HOT,
-    ERR_TEMPERATURE_SELECTOR_WARNING_TMC_TOO_HOT,
-    ERR_TEMPERATURE_IDLER_WARNING_TMC_TOO_HOT,
-    ERR_TEMPERATURE_PULLEY_TMC_OVERHEAT_ERROR,
-    ERR_TEMPERATURE_SELECTOR_TMC_OVERHEAT_ERROR,
-    ERR_TEMPERATURE_IDLER_TMC_OVERHEAT_ERROR,
-    ERR_ELECTRICAL_PULLEY_TMC_DRIVER_ERROR,
-    ERR_ELECTRICAL_SELECTOR_TMC_DRIVER_ERROR,
-    ERR_ELECTRICAL_IDLER_TMC_DRIVER_ERROR,
-    ERR_ELECTRICAL_PULLEY_TMC_DRIVER_RESET,
-    ERR_ELECTRICAL_SELECTOR_TMC_DRIVER_RESET,
-    ERR_ELECTRICAL_IDLER_TMC_DRIVER_RESET,
-    ERR_ELECTRICAL_PULLEY_TMC_UNDERVOLTAGE_ERROR,
-    ERR_ELECTRICAL_SELECTOR_TMC_UNDERVOLTAGE_ERROR,
-    ERR_ELECTRICAL_IDLER_TMC_UNDERVOLTAGE_ERROR,
-    ERR_ELECTRICAL_PULLEY_TMC_DRIVER_SHORTED,
-    ERR_ELECTRICAL_SELECTOR_TMC_DRIVER_SHORTED,
-    ERR_ELECTRICAL_IDLER_TMC_DRIVER_SHORTED,
-    ERR_ELECTRICAL_PULLEY_SELFTEST_FAILED,
-    ERR_ELECTRICAL_SELECTOR_SELFTEST_FAILED,
-    ERR_ELECTRICAL_IDLER_SELFTEST_FAILED,
-    ERR_ELECTRICAL_MCU_UNDERVOLTAGE_VCC,
+    ERR_TEMPERATURE_WARNING_TMC_PULLEY_TOO_HOT,
+    ERR_TEMPERATURE_WARNING_TMC_SELECTOR_TOO_HOT,
+    ERR_TEMPERATURE_WARNING_TMC_IDLER_TOO_HOT,
+    ERR_TEMPERATURE_TMC_PULLEY_OVERHEAT_ERROR,
+    ERR_TEMPERATURE_TMC_SELECTOR_OVERHEAT_ERROR,
+    ERR_TEMPERATURE_TMC_IDLER_OVERHEAT_ERROR,
+    ERR_ELECTRICAL_TMC_PULLEY_DRIVER_ERROR,
+    ERR_ELECTRICAL_TMC_SELECTOR_DRIVER_ERROR,
+    ERR_ELECTRICAL_TMC_IDLER_DRIVER_ERROR,
+    ERR_ELECTRICAL_TMC_PULLEY_DRIVER_RESET,
+    ERR_ELECTRICAL_TMC_SELECTOR_DRIVER_RESET,
+    ERR_ELECTRICAL_TMC_IDLER_DRIVER_RESET,
+    ERR_ELECTRICAL_TMC_PULLEY_UNDERVOLTAGE_ERROR,
+    ERR_ELECTRICAL_TMC_SELECTOR_UNDERVOLTAGE_ERROR,
+    ERR_ELECTRICAL_TMC_IDLER_UNDERVOLTAGE_ERROR,
+    ERR_ELECTRICAL_TMC_PULLEY_DRIVER_SHORTED,
+    ERR_ELECTRICAL_TMC_SELECTOR_DRIVER_SHORTED,
+    ERR_ELECTRICAL_TMC_IDLER_DRIVER_SHORTED,
+    ERR_ELECTRICAL_MMU_PULLEY_SELFTEST_FAILED,
+    ERR_ELECTRICAL_MMU_SELECTOR_SELFTEST_FAILED,
+    ERR_ELECTRICAL_MMU_IDLER_SELFTEST_FAILED,
+    ERR_ELECTRICAL_MMU_MCU_ERROR,
     ERR_CONNECT_MMU_NOT_RESPONDING,
     ERR_CONNECT_COMMUNICATION_ERROR,
     ERR_SYSTEM_FILAMENT_ALREADY_LOADED, 
@@ -128,14 +128,15 @@ static const constexpr uint16_t errorCodes[] PROGMEM = {
     ERR_SYSTEM_FW_UPDATE_NEEDED, 
     ERR_SYSTEM_FW_RUNTIME_ERROR,
     ERR_SYSTEM_UNLOAD_MANUALLY,
-    ERR_SYSTEM_FILAMENT_EJECTED
+    ERR_SYSTEM_FILAMENT_EJECTED,
+    ERR_OTHER_UNKNOWN_ERROR
 };
 
 // @@TODO some of the strings are duplicates, can be merged into one     01234567890123456789
 static const char MSG_TITLE_FINDA_DIDNT_TRIGGER[] PROGMEM_I1     = ISTR("FINDA DIDNT TRIGGER"); ////MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-static const char MSG_TITLE_FINDA_DIDNT_GO_OFF[] PROGMEM_I1      = ISTR("FINDA: FILAM. STUCK"); ////MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
+static const char MSG_TITLE_FINDA_FILAMENT_STUCK[] PROGMEM_I1      = ISTR("FINDA FILAM. STUCK"); ////MSG_TITLE_FINDA_FILAMENT_STUCK c=20
 static const char MSG_TITLE_FSENSOR_DIDNT_TRIGGER[] PROGMEM_I1   = ISTR("FSENSOR DIDNT TRIGG."); ////MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-static const char MSG_TITLE_FSENSOR_DIDNT_GO_OFF[] PROGMEM_I1    = ISTR("FSENSOR: FIL. STUCK"); ////MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
+static const char MSG_TITLE_FSENSOR_FILAMENT_STUCK[] PROGMEM_I1    = ISTR("FSENSOR FIL. STUCK"); ////MSG_TITLE_FSENSOR_FILAMENT_STUCK c=20
 static const char MSG_TITLE_PULLEY_CANNOT_MOVE[] PROGMEM_I1      = ISTR("PULLEY CANNOT MOVE"); ////MSG_TITLE_PULLEY_CANNOT_MOVE c=20
 static const char MSG_TITLE_FSENSOR_TOO_EARLY[] PROGMEM_I1       = ISTR("FSENSOR TOO EARLY"); ////MSG_TITLE_FSENSOR_TOO_EARLY c=20
 static const char MSG_TITLE_INSPECT_FINDA[] PROGMEM_I1           = ISTR("INSPECT FINDA"); ////MSG_TITLE_INSPECT_FINDA c=20
@@ -145,40 +146,50 @@ static const char MSG_TITLE_SELECTOR_CANNOT_HOME[] PROGMEM_I1    = ISTR("SELECTO
 static const char MSG_TITLE_IDLER_CANNOT_MOVE[] PROGMEM_I1       = ISTR("IDLER CANNOT MOVE"); ////MSG_TITLE_IDLER_CANNOT_MOVE c=20
 static const char MSG_TITLE_IDLER_CANNOT_HOME[] PROGMEM_I1       = ISTR("IDLER CANNOT HOME"); ////MSG_TITLE_IDLER_CANNOT_HOME c=20
 static const char MSG_TITLE_TMC_WARNING_TMC_TOO_HOT[] PROGMEM_I1 = ISTR("WARNING TMC TOO HOT"); ////MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-//static const char MSG_TITLE_TMC_WARNING_TMC_TOO_HOT[] PROGMEM_I1 = ISTR("WARNING TMC TOO HOT"); ////MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-//static const char MSG_TITLE_TMC_WARNING_TMC_TOO_HOT[] PROGMEM_I1 = ISTR("WARNING TMC TOO HOT");
+//static const char MSG_TITLE_WARNING_TMC_PULLEY_TOO_HOT[] PROGMEM_I1 = ISTR("WARNING TMC TOO HOT");
+//static const char MSG_TITLE_WARNING_TMC_SELECTOR_TOO_HOT[] PROGMEM_I1 = ISTR("WARNING TMC TOO HOT");
+//static const char MSG_TITLE_WARNING_TMC_IDLER_TOO_HOT[] PROGMEM_I1 = ISTR("WARNING TMC TOO HOT");
 static const char MSG_TITLE_TMC_OVERHEAT_ERROR[] PROGMEM_I1      = ISTR("TMC OVERHEAT ERROR"); ////MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-//static const char MSG_TITLE_TMC_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC OVERHEAT ERROR");
-//static const char MSG_TITLE_TMC_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC OVERHEAT ERROR");
+//static const char MSG_TITLE_TMC_PULLEY_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC OVERHEAT ERROR");
+//static const char MSG_TITLE_TMC_SELECTOR_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC OVERHEAT ERROR");
+//static const char MSG_TITLE_TMC_IDLER_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC OVERHEAT ERROR");
 static const char MSG_TITLE_TMC_DRIVER_ERROR[] PROGMEM_I1        = ISTR("TMC DRIVER ERROR"); ////MSG_TITLE_TMC_DRIVER_ERROR c=20
-//static const char MSG_TITLE_TMC_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC DRIVER ERROR");
-//static const char MSG_TITLE_TMC_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC DRIVER ERROR");
+//static const char MSG_TITLE_TMC_PULLEY_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC DRIVER ERROR");
+//static const char MSG_TITLE_TMC_SELECTOR_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC DRIVER ERROR");
+//static const char MSG_TITLE_TMC_IDLER_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC DRIVER ERROR");
 static const char MSG_TITLE_TMC_DRIVER_RESET[] PROGMEM_I1        = ISTR("TMC DRIVER RESET"); ////MSG_TITLE_TMC_DRIVER_RESET c=20
-//static const char MSG_TITLE_TMC_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC DRIVER RESET");
-//static const char MSG_TITLE_TMC_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC DRIVER RESET");
+//static const char MSG_TITLE_TMC_PULLEY_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC DRIVER RESET");
+//static const char MSG_TITLE_TMC_SELECTOR_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC DRIVER RESET");
+//static const char MSG_TITLE_TMC_IDLER_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC DRIVER RESET");
 static const char MSG_TITLE_TMC_UNDERVOLTAGE_ERROR[] PROGMEM_I1  = ISTR("TMC UNDERVOLTAGE ERR"); ////MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-//static const char MSG_TITLE_TMC_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("TMC UNDERVOLTAGE ERR");
-//static const char MSG_TITLE_TMC_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("TMC UNDERVOLTAGE ERR");
+//static const char MSG_TITLE_TMC_PULLEY_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("TMC UNDERVOLTAGE ERR");
+//static const char MSG_TITLE_TMC_SELECTOR_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("TMC UNDERVOLTAGE ERR");
+//static const char MSG_TITLE_TMC_IDLER_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("TMC UNDERVOLTAGE ERR");
 static const char MSG_TITLE_TMC_DRIVER_SHORTED[] PROGMEM_I1      = ISTR("TMC DRIVER SHORTED"); ////MSG_TITLE_TMC_DRIVER_SHORTED c=20
-//static const char MSG_TITLE_TMC_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("TMC DRIVER SHORTED");
-//static const char MSG_TITLE_TMC_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("TMC DRIVER SHORTED");
+//static const char MSG_TITLE_TMC_PULLEY_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("TMC DRIVER SHORTED");
+//static const char MSG_TITLE_TMC_SELECTOR_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("TMC DRIVER SHORTED");
+//static const char MSG_TITLE_TMC_IDLER_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("TMC DRIVER SHORTED");
 static const char MSG_TITLE_SELFTEST_FAILED[] PROGMEM_I1      = ISTR("MMU SELFTEST FAILED"); ////MSG_TITLE_SELFTEST_FAILED c=20
-static const char MSG_TITLE_MCU_UNDERVOLTAGE_VCC[] PROGMEM_I1      = ISTR("MCU UNDERVOLTAGE VCC"); ////MSG_TITLE_MCU_UNDERVOLTAGE_VCC c=20
+//static const char MSG_TITLE_MMU_PULLEY_SELFTEST_FAILED[] PROGMEM_I1      = ISTR("MMU SELFTEST FAILED");
+//static const char MSG_TITLE_MMU_SELECTOR_SELFTEST_FAILED[] PROGMEM_I1      = ISTR("MMU SELFTEST FAILED");
+//static const char MSG_TITLE_MMU_IDLER_SELFTEST_FAILED[] PROGMEM_I1      = ISTR("MMU SELFTEST FAILED");
+static const char MSG_TITLE_MMU_MCU_ERROR[] PROGMEM_I1      = ISTR("MMU MCU ERROR"); ////MSG_TITLE_MMU_MCU_ERROR c=20
 static const char MSG_TITLE_MMU_NOT_RESPONDING[] PROGMEM_I1      = ISTR("MMU NOT RESPONDING"); ////MSG_TITLE_MMU_NOT_RESPONDING c=20
 static const char MSG_TITLE_COMMUNICATION_ERROR[] PROGMEM_I1     = ISTR("COMMUNICATION ERROR"); ////MSG_TITLE_COMMUNICATION_ERROR c=20
-static const char MSG_TITLE_FIL_ALREADY_LOADED[] PROGMEM_I1      = ISTR("FILAMENT ALREADY LOA"); ////MSG_TITLE_FIL_ALREADY_LOADED c=20
+static const char MSG_TITLE_FILAMENT_ALREADY_LOADED[] PROGMEM_I1 = ISTR("FIL. ALREADY LOADED"); ////MSG_TITLE_FILAMENT_ALREADY_LOADED c=20
 static const char MSG_TITLE_INVALID_TOOL[] PROGMEM_I1            = ISTR("INVALID TOOL"); ////MSG_TITLE_INVALID_TOOL c=20
 static const char MSG_TITLE_QUEUE_FULL[] PROGMEM_I1              = ISTR("QUEUE FULL"); ////MSG_TITLE_QUEUE_FULL c=20
 static const char MSG_TITLE_FW_UPDATE_NEEDED[] PROGMEM_I1        = ISTR("MMU FW UPDATE NEEDED"); ////MSG_TITLE_FW_UPDATE_NEEDED c=20
 static const char MSG_TITLE_FW_RUNTIME_ERROR[] PROGMEM_I1        = ISTR("FW RUNTIME ERROR"); ////MSG_TITLE_FW_RUNTIME_ERROR c=20
 static const char MSG_TITLE_UNLOAD_MANUALLY[] PROGMEM_I1         = ISTR("UNLOAD MANUALLY"); ////MSG_TITLE_UNLOAD_MANUALLY c=20
 static const char MSG_TITLE_FILAMENT_EJECTED[] PROGMEM_I1        = ISTR("FILAMENT EJECTED"); ////MSG_TITLE_FILAMENT_EJECTED c=20
+static const char MSG_TITLE_UNKNOWN_ERROR[] PROGMEM_I1           = ISTR("UNKNOWN ERROR"); ////MSG_TITLE_UNKNOWN_ERROR c=20
 
 static const char * const errorTitles [] PROGMEM = {
     _R(MSG_TITLE_FINDA_DIDNT_TRIGGER),
-    _R(MSG_TITLE_FINDA_DIDNT_GO_OFF),
+    _R(MSG_TITLE_FINDA_FILAMENT_STUCK),
     _R(MSG_TITLE_FSENSOR_DIDNT_TRIGGER),
-    _R(MSG_TITLE_FSENSOR_DIDNT_GO_OFF),
+    _R(MSG_TITLE_FSENSOR_FILAMENT_STUCK),
     _R(MSG_TITLE_PULLEY_CANNOT_MOVE),
     _R(MSG_TITLE_FSENSOR_TOO_EARLY),
     _R(MSG_TITLE_INSPECT_FINDA),
@@ -208,53 +219,57 @@ static const char * const errorTitles [] PROGMEM = {
     _R(MSG_TITLE_SELFTEST_FAILED),
     _R(MSG_TITLE_SELFTEST_FAILED),
     _R(MSG_TITLE_SELFTEST_FAILED),
-    _R(MSG_TITLE_MCU_UNDERVOLTAGE_VCC),
+    _R(MSG_TITLE_MMU_MCU_ERROR),
     _R(MSG_TITLE_MMU_NOT_RESPONDING),
     _R(MSG_TITLE_COMMUNICATION_ERROR),
-    _R(MSG_TITLE_FIL_ALREADY_LOADED),
+    _R(MSG_TITLE_FILAMENT_ALREADY_LOADED),
     _R(MSG_TITLE_INVALID_TOOL),
     _R(MSG_TITLE_QUEUE_FULL),
     _R(MSG_TITLE_FW_UPDATE_NEEDED),
     _R(MSG_TITLE_FW_RUNTIME_ERROR),
     _R(MSG_TITLE_UNLOAD_MANUALLY),
-    _R(MSG_TITLE_FILAMENT_EJECTED)
+    _R(MSG_TITLE_FILAMENT_EJECTED),
+    _R(MSG_TITLE_UNKNOWN_ERROR)
 };
 
 // @@TODO looking at the texts, they can be composed of several parts and/or parametrized (could save a lot of space ;) )
 // Moreover, some of them have been disabled in favour of saving some more code size.
 static const char MSG_DESC_FINDA_DIDNT_TRIGGER[] PROGMEM_I1 = ISTR("FINDA didn't trigger while loading the filament. Ensure the filament can move and FINDA works."); ////MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-static const char MSG_DESC_FINDA_DIDNT_GO_OFF[] PROGMEM_I1 = ISTR("FINDA didn't switch off while unloading filament. Try unloading manually. Ensure filament can move and FINDA works."); ////MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-static const char MSG_DESC_FSENSOR_DIDNT_TRIGGER[] PROGMEM_I1 = ISTR("Filament sensor didn't trigger while loading the filament. Ensure the filament reached the fsensor and the sensor works."); ////MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-static const char MSG_DESC_FSENSOR_DIDNT_GO_OFF[] PROGMEM_I1 = ISTR("Filament sensor didn't switch off while unloading filament. Ensure filament can move and the sensor works."); ////MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-static const char MSG_DESC_PULLEY_STALLED[] PROGMEM_I1 = ISTR("Pulley motor stalled. Ensure the pulley can move and check the wiring."); ////MSG_DESC_PULLEY_STALLED c=20 r=8
+static const char MSG_DESC_FINDA_FILAMENT_STUCK[] PROGMEM_I1 = ISTR("FINDA didn't switch off while unloading filament. Try unloading manually. Ensure filament can move and FINDA works."); ////MSG_DESC_FINDA_FILAMENT_STUCK c=20 r=8
+static const char MSG_DESC_FSENSOR_DIDNT_TRIGGER[] PROGMEM_I1 = ISTR("Filament sensor didn't trigger while loading the filament. Ensure the sensor is calibrated and the filament reached it."); ////MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
+static const char MSG_DESC_FSENSOR_FILAMENT_STUCK[] PROGMEM_I1 = ISTR("Filament sensor didn't switch off while unloading filament. Ensure filament can move and the sensor works."); ////MSG_DESC_FSENSOR_FILAMENT_STUCK c=20 r=8
+static const char MSG_DESC_PULLEY_CANNOT_MOVE[] PROGMEM_I1 = ISTR("Pulley motor stalled. Ensure the pulley can move and check the wiring."); ////MSG_DESC_PULLEY_CANNOT_MOVE c=20 r=8
 static const char MSG_DESC_FSENSOR_TOO_EARLY[] PROGMEM_I1 = ISTR("Filament sensor triggered too early while loading to extruder. Check there isn't anything stuck in PTFE tube. Check that sensor reads properly."); ////MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-static const char MSG_DESC_INSPECT_FINDA[] PROGMEM_I1 = ISTR("Selector can't move due to FINDA detecting a filament. Make sure no filament is in selector and FINDA works properly."); ////MSG_DESC_INSPECT_FINDA c=20 r=8
+static const char MSG_DESC_INSPECT_FINDA[] PROGMEM_I1 = ISTR("Selector can't move due to FINDA detecting a filament. Make sure no filament is in Selector and FINDA works properly."); ////MSG_DESC_INSPECT_FINDA c=20 r=8
 static const char MSG_DESC_LOAD_TO_EXTRUDER_FAILED[] PROGMEM_I1 = ISTR("Loading to extruder failed. Inspect the filament tip shape. Refine the sensor calibration, if needed."); ////MSG_DESC_LOAD_TO_EXTRUDER_FAILED c=20 r=8
 static const char MSG_DESC_SELECTOR_CANNOT_HOME[] PROGMEM_I1 = ISTR("The Selector cannot home properly. Check for anything blocking its movement."); ////MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
 static const char MSG_DESC_CANNOT_MOVE[] PROGMEM_I1 = ISTR("Can't move Selector or Idler."); /////MSG_DESC_CANNOT_MOVE c=20 r=4
-//static const char MSG_DESC_SELECTOR_CANNOT_MOVE[] PROGMEM_I1 = ISTR("The Selector cannot move. Check for anything blocking its movement. Check the wiring is correct.");
+//static const char MSG_DESC_SELECTOR_CANNOT_MOVE[] PROGMEM_I1 = ISTR("The Selector cannot move. Check for anything blocking its movement. Check if the wiring is correct.");
 static const char MSG_DESC_IDLER_CANNOT_HOME[] PROGMEM_I1 = ISTR("The Idler cannot home properly. Check for anything blocking its movement."); ////MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-//static const char MSG_DESC_IDLER_CANNOT_MOVE[] PROGMEM_I1 = ISTR("The Idler cannot move properly. Check for anything blocking its movement. Check the wiring is correct.");
+//static const char MSG_DESC_IDLER_CANNOT_MOVE[] PROGMEM_I1 = ISTR("The Idler cannot move properly. Check for anything blocking its movement. Check if the wiring is correct.");
 static const char MSG_DESC_TMC[] PROGMEM_I1 = ISTR("More details online."); ////MSG_DESC_TMC c=20 r=8
-//static const char MSG_DESC_PULLEY_WARNING_TMC_TOO_HOT[] PROGMEM_I1 = ISTR("TMC driver for the Pulley motor is almost overheating. Make sure there is sufficient airflow near the MMU board.");
-//static const char MSG_DESC_SELECTOR_WARNING_TMC_TOO_HOT[] PROGMEM_I1 = ISTR("TMC driver for the Selector motor is almost overheating. Make sure there is sufficient airflow near the MMU board.");
-//static const char MSG_DESC_IDLER_WARNING_TMC_TOO_HOT[] PROGMEM_I1 = ISTR("TMC driver for the Idler motor is almost overheating. Make sure there is sufficient airflow near the MMU board.");
-//static const char MSG_DESC_PULLEY_TMC_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Pulley motor is overheated. Cool down the MMU board and reset MMU.");
-//static const char MSG_DESC_SELECTOR_TMC_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Selector motor is overheated. Cool down the MMU board and reset MMU.");
-//static const char MSG_DESC_IDLER_TMC_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Idler motor is overheated. Cool down the MMU board and reset MMU.");
-//static const char MSG_DESC_PULLEY_TMC_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Pulley motor is not responding. Try resetting the MMU.");
-//static const char MSG_DESC_SELECTOR_TMC_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Selector motor is not responding. Try resetting the MMU.");
-//static const char MSG_DESC_IDLER_TMC_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Idler motor is not responding. Try resetting the MMU.");
-//static const char MSG_DESC_PULLEY_TMC_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC driver for the Pulley motor was restarted. There is probably an issue with the electronics. Check the wiring and connectors.");
-//static const char MSG_DESC_SELECTOR_TMC_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC driver for the Selector motor was restarted. There is probably an issue with the electronics. Check the wiring and connectors.");
-//static const char MSG_DESC_IDLER_TMC_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC driver for the Idler motor was restarted. There is probably an issue with the electronics. Check the wiring and connectors.");
-//static const char MSG_DESC_PULLEY_TMC_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("Not enough current for the Pulley TMC driver. There is probably an issue with the electronics. Check the wiring and connectors.");
-//static const char MSG_DESC_SELECTOR_TMC_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("Not enough current for the Selector TMC driver. There is probably an issue with the electronics. Check the wiring and connectors.");
-//static const char MSG_DESC_IDLER_TMC_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("Not enough current for the Idler TMC driver. There is probably an issue with the electronics. Check the wiring and connectors.");
-//static const char MSG_DESC_PULLEY_TMC_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("Short circuit on the Pulley TMC driver. Check the wiring and connectors.");
-//static const char MSG_DESC_SELECTOR_TMC_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("Short circuit on the Selector TMC driver. Check the wiring and connectors.");
-//static const char MSG_DESC_IDLER_TMC_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("Short circuit on the Idler TMC driver. Check the wiring and connectors.");
-//static const char MSG_DESC_MCU_UNDERVOLTAGE_VCC[] PROGMEM_I1 = ISTR("MMU MCU detected a 5V undervoltage. There might be an issue with the electronics. Check the wiring and connectors"); ////MSG_DESC_MCU_UNDERVOLTAGE_VCC c=20 r=8
+//static const char MSG_DESC_WARNING_TMC_PULLEY_TOO_HOT[] PROGMEM_I1 = ISTR("TMC driver for the Pulley motor is almost overheating. Make sure there is sufficient airflow near the MMU board.");
+//static const char MSG_DESC_WARNING_TMC_SELECTOR_TOO_HOT[] PROGMEM_I1 = ISTR("TMC driver for the Selector motor is almost overheating. Make sure there is sufficient airflow near the MMU board.");
+//static const char MSG_DESC_WARNING_TMC_IDLER_TOO_HOT[] PROGMEM_I1 = ISTR("TMC driver for the Idler motor is almost overheating. Make sure there is sufficient airflow near the MMU board.");
+//static const char MSG_DESC_TMC_PULLEY_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Pulley motor is overheated. Cool down the MMU board and reset MMU.");
+//static const char MSG_DESC_TMC_SELECTOR_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Selector motor is overheated. Cool down the MMU board and reset MMU.");
+//static const char MSG_DESC_TMC_IDLER_OVERHEAT_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Idler motor is overheated. Cool down the MMU board and reset MMU.");
+//static const char MSG_DESC_TMC_PULLEY_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Pulley motor is not responding. Try resetting the MMU. If the issue persists contact support.");
+//static const char MSG_DESC_TMC_SELECTOR_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Selector motor is not responding. Try resetting the MMU. If the issue persists contact support.");
+//static const char MSG_DESC_TMC_IDLER_DRIVER_ERROR[] PROGMEM_I1 = ISTR("TMC driver for the Idler motor is not responding. Try resetting the MMU. If the issue persists contact support.");
+//static const char MSG_DESC_TMC_PULLEY_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC driver for the Pulley motor was restarted. There is probably an issue with the electronics. Check the wiring and connectors.");
+//static const char MSG_DESC_TMC_SELECTOR_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC driver for the Selector motor was restarted. There is probably an issue with the electronics. Check the wiring and connectors.");
+//static const char MSG_DESC_TMC_IDLER_DRIVER_RESET[] PROGMEM_I1 = ISTR("TMC driver for the Idler motor was restarted. There is probably an issue with the electronics. Check the wiring and connectors.");
+//static const char MSG_DESC_TMC_PULLEY_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("Not enough current for the Pulley TMC driver. There is probably an issue with the electronics. Check the wiring and connectors.");
+//static const char MSG_DESC_TMC_SELECTOR_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("Not enough current for the Selector TMC driver. There is probably an issue with the electronics. Check the wiring and connectors.");
+//static const char MSG_DESC_TMC_IDLER_UNDERVOLTAGE_ERROR[] PROGMEM_I1 = ISTR("Not enough current for the Idler TMC driver. There is probably an issue with the electronics. Check the wiring and connectors.");
+//static const char MSG_DESC_TMC_PULLEY_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("Short circuit on the Pulley TMC driver. Check the wiring and connectors. If the issue persists contact support.");
+//static const char MSG_DESC_TMC_SELECTOR_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("Short circuit on the Selector TMC driver. Check the wiring and connectors. If the issue persists contact support.");
+//static const char MSG_DESC_TMC_IDLER_DRIVER_SHORTED[] PROGMEM_I1 = ISTR("Short circuit on the Idler TMC driver. Check the wiring and connectors. If the issue persists contact support.");
+//static const char MSG_DESC_MMU_PULLEY_SELFTEST_FAILED[] PROGMEM_I1 = ISTR("MMU selftest failed on the Pulley TMC driver. Check the wiring and connectors. If the issue persists contact support.");
+//static const char MSG_DESC_MMU_SELECTOR_SELFTEST_FAILED[] PROGMEM_I1 = ISTR("MMU selftest failed on the Selector TMC driver. Check the wiring and connectors. If the issue persists contact support.");
+//static const char MSG_DESC_MMU_IDLER_SELFTEST_FAILED[] PROGMEM_I1 = ISTR("MMU selftest failed on the Idler TMC driver. Check the wiring and connectors. If the issue persists contact support.");
+//static const char MSG_DESC_MMU_MCU_ERROR[] PROGMEM_I1 = ISTR("MMU detected a power-related issue. Check the wiring and connectors. If the issue persists, contact support."); ////MSG_DESC_MMU_MCU_ERROR c=20 r=8
 static const char MSG_DESC_MMU_NOT_RESPONDING[] PROGMEM_I1 = ISTR("MMU not responding. Check the wiring and connectors."); ////MSG_DESC_MMU_NOT_RESPONDING c=20 r=4
 static const char MSG_DESC_COMMUNICATION_ERROR[] PROGMEM_I1 = ISTR("MMU not responding correctly. Check the wiring and connectors."); ////MSG_DESC_COMMUNICATION_ERROR c=20 r=4
 static const char MSG_DESC_FILAMENT_ALREADY_LOADED[] PROGMEM_I1 = ISTR("Cannot perform the action, filament is already loaded. Unload it first."); ////MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
@@ -263,9 +278,10 @@ static const char MSG_DESC_QUEUE_FULL[] PROGMEM_I1 = ISTR("MMU Firmware internal
 static const char MSG_DESC_FW_RUNTIME_ERROR[] PROGMEM_I1 = ISTR("Internal runtime error. Try resetting the MMU or updating the firmware."); ////MSG_DESC_FW_RUNTIME_ERROR c=20 r=8
 static const char MSG_DESC_UNLOAD_MANUALLY[] PROGMEM_I1 = ISTR("Filament detected unexpectedly. Ensure no filament is loaded. Check the sensors and wiring."); ////MSG_DESC_UNLOAD_MANUALLY c=20 r=8
 static const char MSG_DESC_FILAMENT_EJECTED[] PROGMEM_I1 = ISTR("Remove the ejected filament from the front of the MMU."); ////MSG_DESC_FILAMENT_EJECTED c=20 r=8
+static const char MSG_DESC_UNKNOWN_ERROR[] PROGMEM_I1    = ISTR("Unexpected error occurred."); ////MSG_DESC_UNKNOWN_ERROR c=20 r=8
 
 // Read explanation in mmu2_protocol_logic.cpp -> supportedMmuFWVersion
-static constexpr char MSG_DESC_FW_UPDATE_NEEDED[] PROGMEM_I1 = ISTR("The MMU firmware version incompatible with the printer's FW. Update to version 2.1.9."); ////MSG_DESC_FW_UPDATE_NEEDED c=20 r=8
+static constexpr char MSG_DESC_FW_UPDATE_NEEDED[] PROGMEM_I1 = ISTR("MMU FW version is incompatible with printer FW.Update to version 3.0.0."); ////MSG_DESC_FW_UPDATE_NEEDED c=20 r=8
 static constexpr uint8_t szFWUN = sizeof(MSG_DESC_FW_UPDATE_NEEDED);
 // at least check the individual version characters in MSG_DESC_FW_UPDATE_NEEDED
 static_assert(MSG_DESC_FW_UPDATE_NEEDED[szFWUN - 7] == ('0' + mmuVersionMajor));
@@ -274,10 +290,10 @@ static_assert(MSG_DESC_FW_UPDATE_NEEDED[szFWUN - 3] == ('0' + mmuVersionPatch));
 
 static const char * const errorDescs[] PROGMEM = {
     _R(MSG_DESC_FINDA_DIDNT_TRIGGER),
-    _R(MSG_DESC_FINDA_DIDNT_GO_OFF),
+    _R(MSG_DESC_FINDA_FILAMENT_STUCK),
     _R(MSG_DESC_FSENSOR_DIDNT_TRIGGER),
-    _R(MSG_DESC_FSENSOR_DIDNT_GO_OFF),
-    _R(MSG_DESC_PULLEY_STALLED),
+    _R(MSG_DESC_FSENSOR_FILAMENT_STUCK),
+    _R(MSG_DESC_PULLEY_CANNOT_MOVE),
     _R(MSG_DESC_FSENSOR_TOO_EARLY),
     _R(MSG_DESC_INSPECT_FINDA),
     _R(MSG_DESC_LOAD_TO_EXTRUDER_FAILED),
@@ -285,28 +301,28 @@ static const char * const errorDescs[] PROGMEM = {
     _R(MSG_DESC_CANNOT_MOVE),
     _R(MSG_DESC_IDLER_CANNOT_HOME),
     _R(MSG_DESC_CANNOT_MOVE),
-    _R(MSG_DESC_TMC), // descPULLEY_WARNING_TMC_TOO_HOT
-    _R(MSG_DESC_TMC), // descSELECTOR_WARNING_TMC_TOO_HOT
-    _R(MSG_DESC_TMC), // descIDLER_WARNING_TMC_TOO_HOT
-    _R(MSG_DESC_TMC), // descPULLEY_TMC_OVERHEAT_ERROR
-    _R(MSG_DESC_TMC), // descSELECTOR_TMC_OVERHEAT_ERROR
-    _R(MSG_DESC_TMC), // descIDLER_TMC_OVERHEAT_ERROR
-    _R(MSG_DESC_TMC), // descPULLEY_TMC_DRIVER_ERROR
-    _R(MSG_DESC_TMC), // descSELECTOR_TMC_DRIVER_ERROR
-    _R(MSG_DESC_TMC), // descIDLER_TMC_DRIVER_ERROR
-    _R(MSG_DESC_TMC), // descPULLEY_TMC_DRIVER_RESET
-    _R(MSG_DESC_TMC), // descSELECTOR_TMC_DRIVER_RESET
-    _R(MSG_DESC_TMC), // descIDLER_TMC_DRIVER_RESET
-    _R(MSG_DESC_TMC), // descPULLEY_TMC_UNDERVOLTAGE_ERROR
-    _R(MSG_DESC_TMC), // descSELECTOR_TMC_UNDERVOLTAGE_ERROR
-    _R(MSG_DESC_TMC), // descIDLER_TMC_UNDERVOLTAGE_ERROR
-    _R(MSG_DESC_TMC), // descPULLEY_TMC_DRIVER_SHORTED
-    _R(MSG_DESC_TMC), // descSELECTOR_TMC_DRIVER_SHORTED
-    _R(MSG_DESC_TMC), // descIDLER_TMC_DRIVER_SHORTED
-    _R(MSG_DESC_TMC), // descPULLEY_SELFTEST_FAILED
-    _R(MSG_DESC_TMC), // descSELECTOR_SELFTEST_FAILED
-    _R(MSG_DESC_TMC), // descIDLER_SELFTEST_FAILED
-    _R(MSG_DESC_TMC), // descMSG_DESC_MCU_UNDERVOLTAGE_VCC
+    _R(MSG_DESC_TMC), // descWARNING_TMC_PULLEY_TOO_HOT
+    _R(MSG_DESC_TMC), // descWARNING_TMC_SELECTOR_TOO_HOT
+    _R(MSG_DESC_TMC), // descWARNING_TMC_IDLER_TOO_HOT
+    _R(MSG_DESC_TMC), // descTMC_PULLEY_OVERHEAT_ERROR
+    _R(MSG_DESC_TMC), // descTMC_SELECTOR_OVERHEAT_ERROR
+    _R(MSG_DESC_TMC), // descTMC_IDLER_OVERHEAT_ERROR
+    _R(MSG_DESC_TMC), // descTMC_PULLEY_DRIVER_ERROR
+    _R(MSG_DESC_TMC), // descTMC_SELECTOR_DRIVER_ERROR
+    _R(MSG_DESC_TMC), // descTMC_IDLER_DRIVER_ERROR
+    _R(MSG_DESC_TMC), // descTMC_PULLEY_DRIVER_RESET
+    _R(MSG_DESC_TMC), // descTMC_SELECTOR_DRIVER_RESET
+    _R(MSG_DESC_TMC), // descTMC_IDLER_DRIVER_RESET
+    _R(MSG_DESC_TMC), // descTMC_PULLEY_UNDERVOLTAGE_ERROR
+    _R(MSG_DESC_TMC), // descTMC_SELECTOR_UNDERVOLTAGE_ERROR
+    _R(MSG_DESC_TMC), // descTMC_IDLER_UNDERVOLTAGE_ERROR
+    _R(MSG_DESC_TMC), // descTMC_PULLEY_DRIVER_SHORTED
+    _R(MSG_DESC_TMC), // descTMC_SELECTOR_DRIVER_SHORTED
+    _R(MSG_DESC_TMC), // descTMC_IDLER_DRIVER_SHORTED
+    _R(MSG_DESC_TMC), // descMMU_PULLEY_SELFTEST_FAILED
+    _R(MSG_DESC_TMC), // descMMU_SELECTOR_SELFTEST_FAILED
+    _R(MSG_DESC_TMC), // descMMU_IDLER_SELFTEST_FAILED
+    _R(MSG_DESC_TMC), // descMSG_DESC_MMU_MCU_ERROR
     _R(MSG_DESC_MMU_NOT_RESPONDING),
     _R(MSG_DESC_COMMUNICATION_ERROR),
     _R(MSG_DESC_FILAMENT_ALREADY_LOADED),
@@ -315,7 +331,8 @@ static const char * const errorDescs[] PROGMEM = {
     _R(MSG_DESC_FW_UPDATE_NEEDED),
     _R(MSG_DESC_FW_RUNTIME_ERROR),
     _R(MSG_DESC_UNLOAD_MANUALLY),
-    _R(MSG_DESC_FILAMENT_EJECTED)
+    _R(MSG_DESC_FILAMENT_EJECTED),
+    _R(MSG_DESC_UNKNOWN_ERROR)
 };
 
 // we have max 3 buttons/operations to select from
@@ -328,7 +345,7 @@ static const char * const errorDescs[] PROGMEM = {
 // -> the left button on the MMU is not used/rendered on the LCD (it is also almost unused on the MMU side)
 static const char MSG_BTN_RETRY[] PROGMEM_I1 = ISTR("Retry"); ////MSG_BTN_RETRY c=8
 static const char MSG_BTN_CONTINUE[] PROGMEM_I1 = ISTR("Done"); ////MSG_BTN_CONTINUE c=8
-static const char MSG_BTN_RESTART_MMU[] PROGMEM_I1 = ISTR("RstMMU"); ////MSG_BTN_RESTART_MMU c=8
+static const char MSG_BTN_RESET_MMU[] PROGMEM_I1 = ISTR("ResetMMU"); ////MSG_BTN_RESET_MMU c=8
 static const char MSG_BTN_UNLOAD[] PROGMEM_I1 = ISTR("Unload"); ////MSG_BTN_UNLOAD c=8
 static const char MSG_BTN_STOP[] PROGMEM_I1 = ISTR("Stop"); ////MSG_BTN_STOP c=8
 static const char MSG_BTN_DISABLE_MMU[] PROGMEM_I1 = ISTR("Disable"); ////MSG_BTN_DISABLE_MMU c=8
@@ -338,7 +355,7 @@ static const char MSG_BTN_MORE[] PROGMEM_N1 = "\x06";
 static const char * const btnOperation[] PROGMEM = {
     _R(MSG_BTN_RETRY),
     _R(MSG_BTN_CONTINUE),
-    _R(MSG_BTN_RESTART_MMU),
+    _R(MSG_BTN_RESET_MMU),
     _R(MSG_BTN_UNLOAD),
     _R(MSG_BTN_STOP),
     _R(MSG_BTN_DISABLE_MMU),
@@ -353,11 +370,11 @@ uint8_t constexpr Btns(ButtonOperations bMiddle, ButtonOperations bRight){
 
 static const uint8_t errorButtons[] PROGMEM = {
     Btns(ButtonOperations::Retry, ButtonOperations::NoOperation),//FINDA_DIDNT_TRIGGER
-    Btns(ButtonOperations::Retry, ButtonOperations::NoOperation),//FINDA_DIDNT_GO_OFF
+    Btns(ButtonOperations::Retry, ButtonOperations::NoOperation),//FINDA_FILAMENT_STUCK
     Btns(ButtonOperations::Retry, ButtonOperations::NoOperation),//FSENSOR_DIDNT_TRIGGER
-    Btns(ButtonOperations::Retry, ButtonOperations::NoOperation),//FSENSOR_DIDNT_GO_OFF
+    Btns(ButtonOperations::Retry, ButtonOperations::NoOperation),//FSENSOR_FILAMENT_STUCK
 
-    Btns(ButtonOperations::Retry, ButtonOperations::NoOperation),//PULLEY_STALLED
+    Btns(ButtonOperations::Retry, ButtonOperations::NoOperation),//PULLEY_CANNOT_MOVE
     Btns(ButtonOperations::Retry, ButtonOperations::NoOperation),//FSENSOR_TOO_EARLY
     Btns(ButtonOperations::Retry, ButtonOperations::NoOperation),//INSPECT_FINDA
     Btns(ButtonOperations::Continue, ButtonOperations::NoOperation),//LOAD_TO_EXTRUDER_FAILED
@@ -366,39 +383,40 @@ static const uint8_t errorButtons[] PROGMEM = {
     Btns(ButtonOperations::Retry, ButtonOperations::NoOperation),//IDLER_CANNOT_HOME
     Btns(ButtonOperations::Retry, ButtonOperations::NoOperation),//IDLER_CANNOT_MOVE
 
-    Btns(ButtonOperations::Continue, ButtonOperations::RestartMMU),//PULLEY_WARNING_TMC_TOO_HOT
-    Btns(ButtonOperations::Continue, ButtonOperations::RestartMMU),//SELECTOR_WARNING_TMC_TOO_HOT
-    Btns(ButtonOperations::Continue, ButtonOperations::RestartMMU),//IDLER_WARNING_TMC_TOO_HOT
+    Btns(ButtonOperations::Continue, ButtonOperations::ResetMMU),//WARNING_TMC_PULLEY_TOO_HOT
+    Btns(ButtonOperations::Continue, ButtonOperations::ResetMMU),//WARNING_TMC_SELECTOR_TOO_HOT
+    Btns(ButtonOperations::Continue, ButtonOperations::ResetMMU),//WARNING_TMC_IDLER_TOO_HOT
 
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//PULLEY_TMC_OVERHEAT_ERROR
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//SELECTOR_TMC_OVERHEAT_ERROR
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//IDLER_TMC_OVERHEAT_ERROR
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//PULLEY_TMC_DRIVER_ERROR
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//SELECTOR_TMC_DRIVER_ERROR
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//IDLER_TMC_DRIVER_ERROR
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//PULLEY_TMC_DRIVER_RESET
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//SELECTOR_TMC_DRIVER_RESET
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//IDLER_TMC_DRIVER_RESET
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//PULLEY_TMC_UNDERVOLTAGE_ERROR
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//SELECTOR_TMC_UNDERVOLTAGE_ERROR
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//IDLER_TMC_UNDERVOLTAGE_ERROR
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//PULLEY_TMC_DRIVER_SHORTED
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//SELECTOR_TMC_DRIVER_SHORTED
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//IDLER_TMC_DRIVER_SHORTED
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//PULLEY_SELFTEST_FAILED
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//SELECTOR_SELFTEST_FAILED
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//IDLER_SELFTEST_FAILED
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//MCU_UNDERVOLTAGE_VCC
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::DisableMMU),//MMU_NOT_RESPONDING
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::DisableMMU),//COMMUNICATION_ERROR
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//TMC_PULLEY_OVERHEAT_ERROR
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//TMC_SELECTOR_OVERHEAT_ERROR
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//TMC_IDLER_OVERHEAT_ERROR
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//TMC_PULLEY_DRIVER_ERROR
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//TMC_SELECTOR_DRIVER_ERROR
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//TMC_IDLER_DRIVER_ERROR
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//TMC_PULLEY_DRIVER_RESET
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//TMC_SELECTOR_DRIVER_RESET
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//TMC_IDLER_DRIVER_RESET
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//TMC_PULLEY_UNDERVOLTAGE_ERROR
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//TMC_SELECTOR_UNDERVOLTAGE_ERROR
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//TMC_IDLER_UNDERVOLTAGE_ERROR
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//TMC_PULLEY_DRIVER_SHORTED
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//TMC_SELECTOR_DRIVER_SHORTED
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//TMC_IDLER_DRIVER_SHORTED
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//MMU_PULLEY_SELFTEST_FAILED
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//MMU_SELECTOR_SELFTEST_FAILED
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//MMU_IDLER_SELFTEST_FAILED
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//MMU_MCU_ERROR
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::DisableMMU),//MMU_NOT_RESPONDING
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::DisableMMU),//COMMUNICATION_ERROR
 
     Btns(ButtonOperations::Unload, ButtonOperations::Continue),//FILAMENT_ALREADY_LOADED
-    Btns(ButtonOperations::StopPrint, ButtonOperations::RestartMMU),//INVALID_TOOL
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//QUEUE_FULL
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::DisableMMU),//FW_UPDATE_NEEDED
-    Btns(ButtonOperations::RestartMMU, ButtonOperations::NoOperation),//FW_RUNTIME_ERROR
+    Btns(ButtonOperations::StopPrint, ButtonOperations::ResetMMU),//INVALID_TOOL
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//QUEUE_FULL
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::DisableMMU),//FW_UPDATE_NEEDED
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//FW_RUNTIME_ERROR
     Btns(ButtonOperations::Retry, ButtonOperations::NoOperation),//UNLOAD_MANUALLY
     Btns(ButtonOperations::Continue, ButtonOperations::NoOperation),//FILAMENT_EJECTED
+    Btns(ButtonOperations::ResetMMU, ButtonOperations::NoOperation),//UNKOWN_ERROR
 };
 
 static_assert( sizeof(errorCodes) / sizeof(errorCodes[0]) == sizeof(errorDescs) / sizeof (errorDescs[0]));

Firmware/mmu2_error_converter.cpp

@@ -31,20 +31,20 @@ static constexpr uint8_t FindErrorIndex(uint16_t pec) {
 
 // check that the searching algoritm works
 static_assert( FindErrorIndex(ERR_MECHANICAL_FINDA_DIDNT_TRIGGER) == 0);
-static_assert( FindErrorIndex(ERR_MECHANICAL_FINDA_DIDNT_GO_OFF) == 1);
+static_assert( FindErrorIndex(ERR_MECHANICAL_FINDA_FILAMENT_STUCK) == 1);
 static_assert( FindErrorIndex(ERR_MECHANICAL_FSENSOR_DIDNT_TRIGGER) == 2);
-static_assert( FindErrorIndex(ERR_MECHANICAL_FSENSOR_DIDNT_GO_OFF) == 3);
+static_assert( FindErrorIndex(ERR_MECHANICAL_FSENSOR_FILAMENT_STUCK) == 3);
 
 uint8_t PrusaErrorCodeIndex(uint16_t ec) {
     switch (ec) {
     case (uint16_t)ErrorCode::FINDA_DIDNT_SWITCH_ON:
         return FindErrorIndex(ERR_MECHANICAL_FINDA_DIDNT_TRIGGER);
     case (uint16_t)ErrorCode::FINDA_DIDNT_SWITCH_OFF:
-        return FindErrorIndex(ERR_MECHANICAL_FINDA_DIDNT_GO_OFF);
+        return FindErrorIndex(ERR_MECHANICAL_FINDA_FILAMENT_STUCK);
     case (uint16_t)ErrorCode::FSENSOR_DIDNT_SWITCH_ON:
         return FindErrorIndex(ERR_MECHANICAL_FSENSOR_DIDNT_TRIGGER);
     case (uint16_t)ErrorCode::FSENSOR_DIDNT_SWITCH_OFF:
-        return FindErrorIndex(ERR_MECHANICAL_FSENSOR_DIDNT_GO_OFF);
+        return FindErrorIndex(ERR_MECHANICAL_FSENSOR_FILAMENT_STUCK);
     case (uint16_t)ErrorCode::FSENSOR_TOO_EARLY:
         return FindErrorIndex(ERR_MECHANICAL_FSENSOR_TOO_EARLY);
     case (uint16_t)ErrorCode::FINDA_FLICKERS:
@@ -85,7 +85,7 @@ uint8_t PrusaErrorCodeIndex(uint16_t ec) {
     case (uint16_t)ErrorCode::FINDA_VS_EEPROM_DISREPANCY:
         return FindErrorIndex(ERR_SYSTEM_UNLOAD_MANUALLY);
     case (uint16_t)ErrorCode::MCU_UNDERVOLTAGE_VCC:
-        return FindErrorIndex(ERR_ELECTRICAL_MCU_UNDERVOLTAGE_VCC);
+        return FindErrorIndex(ERR_ELECTRICAL_MMU_MCU_ERROR);
     }
     
     // Electrical issues which can be detected somehow.
@@ -93,13 +93,13 @@ uint8_t PrusaErrorCodeIndex(uint16_t ec) {
     // and to keep the code size down.
     if (ec & (uint16_t)ErrorCode::TMC_PULLEY_BIT) {
         if ((ec & (uint16_t)ErrorCode::MMU_SOLDERING_NEEDS_ATTENTION) == (uint16_t)ErrorCode::MMU_SOLDERING_NEEDS_ATTENTION)
-            return FindErrorIndex(ERR_ELECTRICAL_PULLEY_SELFTEST_FAILED);
+            return FindErrorIndex(ERR_ELECTRICAL_MMU_PULLEY_SELFTEST_FAILED);
     } else if (ec & (uint16_t)ErrorCode::TMC_SELECTOR_BIT) {
         if ((ec & (uint16_t)ErrorCode::MMU_SOLDERING_NEEDS_ATTENTION) == (uint16_t)ErrorCode::MMU_SOLDERING_NEEDS_ATTENTION)
-            return FindErrorIndex(ERR_ELECTRICAL_SELECTOR_SELFTEST_FAILED);
+            return FindErrorIndex(ERR_ELECTRICAL_MMU_SELECTOR_SELFTEST_FAILED);
     } else if (ec & (uint16_t)ErrorCode::TMC_IDLER_BIT) {
         if ((ec & (uint16_t)ErrorCode::MMU_SOLDERING_NEEDS_ATTENTION) == (uint16_t)ErrorCode::MMU_SOLDERING_NEEDS_ATTENTION)
-            return FindErrorIndex(ERR_ELECTRICAL_IDLER_SELFTEST_FAILED);
+            return FindErrorIndex(ERR_ELECTRICAL_MMU_IDLER_SELFTEST_FAILED);
     }
 
     // TMC-related errors - multiple of these can occur at once
@@ -107,47 +107,47 @@ uint8_t PrusaErrorCodeIndex(uint16_t ec) {
     // By carefully ordering the checks here we can prioritize the errors being reported to the user.
     if (ec & (uint16_t)ErrorCode::TMC_PULLEY_BIT) {
         if (ec & (uint16_t)ErrorCode::TMC_IOIN_MISMATCH)
-            return FindErrorIndex(ERR_ELECTRICAL_PULLEY_TMC_DRIVER_ERROR);
+            return FindErrorIndex(ERR_ELECTRICAL_TMC_PULLEY_DRIVER_ERROR);
         if (ec & (uint16_t)ErrorCode::TMC_RESET)
-            return FindErrorIndex(ERR_ELECTRICAL_PULLEY_TMC_DRIVER_RESET);
+            return FindErrorIndex(ERR_ELECTRICAL_TMC_PULLEY_DRIVER_RESET);
         if (ec & (uint16_t)ErrorCode::TMC_UNDERVOLTAGE_ON_CHARGE_PUMP)
-            return FindErrorIndex(ERR_ELECTRICAL_PULLEY_TMC_UNDERVOLTAGE_ERROR);
+            return FindErrorIndex(ERR_ELECTRICAL_TMC_PULLEY_UNDERVOLTAGE_ERROR);
         if (ec & (uint16_t)ErrorCode::TMC_SHORT_TO_GROUND)
-            return FindErrorIndex(ERR_ELECTRICAL_PULLEY_TMC_DRIVER_SHORTED);
+            return FindErrorIndex(ERR_ELECTRICAL_TMC_PULLEY_DRIVER_SHORTED);
         if (ec & (uint16_t)ErrorCode::TMC_OVER_TEMPERATURE_WARN)
-            return FindErrorIndex(ERR_TEMPERATURE_PULLEY_WARNING_TMC_TOO_HOT);
+            return FindErrorIndex(ERR_TEMPERATURE_WARNING_TMC_PULLEY_TOO_HOT);
         if (ec & (uint16_t)ErrorCode::TMC_OVER_TEMPERATURE_ERROR)
-            return FindErrorIndex(ERR_TEMPERATURE_PULLEY_TMC_OVERHEAT_ERROR);
+            return FindErrorIndex(ERR_TEMPERATURE_TMC_PULLEY_OVERHEAT_ERROR);
     } else if (ec & (uint16_t)ErrorCode::TMC_SELECTOR_BIT) {
         if (ec & (uint16_t)ErrorCode::TMC_IOIN_MISMATCH)
-            return FindErrorIndex(ERR_ELECTRICAL_SELECTOR_TMC_DRIVER_ERROR);
+            return FindErrorIndex(ERR_ELECTRICAL_TMC_SELECTOR_DRIVER_ERROR);
         if (ec & (uint16_t)ErrorCode::TMC_RESET)
-            return FindErrorIndex(ERR_ELECTRICAL_SELECTOR_TMC_DRIVER_RESET);
+            return FindErrorIndex(ERR_ELECTRICAL_TMC_SELECTOR_DRIVER_RESET);
         if (ec & (uint16_t)ErrorCode::TMC_UNDERVOLTAGE_ON_CHARGE_PUMP)
-            return FindErrorIndex(ERR_ELECTRICAL_SELECTOR_TMC_UNDERVOLTAGE_ERROR);
+            return FindErrorIndex(ERR_ELECTRICAL_TMC_SELECTOR_UNDERVOLTAGE_ERROR);
         if (ec & (uint16_t)ErrorCode::TMC_SHORT_TO_GROUND)
-            return FindErrorIndex(ERR_ELECTRICAL_SELECTOR_TMC_DRIVER_SHORTED);
+            return FindErrorIndex(ERR_ELECTRICAL_TMC_SELECTOR_DRIVER_SHORTED);
         if (ec & (uint16_t)ErrorCode::TMC_OVER_TEMPERATURE_WARN)
-            return FindErrorIndex(ERR_TEMPERATURE_SELECTOR_WARNING_TMC_TOO_HOT);
+            return FindErrorIndex(ERR_TEMPERATURE_WARNING_TMC_SELECTOR_TOO_HOT);
         if (ec & (uint16_t)ErrorCode::TMC_OVER_TEMPERATURE_ERROR)
-            return FindErrorIndex(ERR_TEMPERATURE_SELECTOR_TMC_OVERHEAT_ERROR);
+            return FindErrorIndex(ERR_TEMPERATURE_TMC_SELECTOR_OVERHEAT_ERROR);
     } else if (ec & (uint16_t)ErrorCode::TMC_IDLER_BIT) {
         if (ec & (uint16_t)ErrorCode::TMC_IOIN_MISMATCH)
-            return FindErrorIndex(ERR_ELECTRICAL_IDLER_TMC_DRIVER_ERROR);
+            return FindErrorIndex(ERR_ELECTRICAL_TMC_IDLER_DRIVER_ERROR);
         if (ec & (uint16_t)ErrorCode::TMC_RESET)
-            return FindErrorIndex(ERR_ELECTRICAL_IDLER_TMC_DRIVER_RESET);
+            return FindErrorIndex(ERR_ELECTRICAL_TMC_IDLER_DRIVER_RESET);
         if (ec & (uint16_t)ErrorCode::TMC_UNDERVOLTAGE_ON_CHARGE_PUMP)
-            return FindErrorIndex(ERR_ELECTRICAL_IDLER_TMC_UNDERVOLTAGE_ERROR);
+            return FindErrorIndex(ERR_ELECTRICAL_TMC_IDLER_UNDERVOLTAGE_ERROR);
         if (ec & (uint16_t)ErrorCode::TMC_SHORT_TO_GROUND)
-            return FindErrorIndex(ERR_ELECTRICAL_IDLER_TMC_DRIVER_SHORTED);
+            return FindErrorIndex(ERR_ELECTRICAL_TMC_IDLER_DRIVER_SHORTED);
         if (ec & (uint16_t)ErrorCode::TMC_OVER_TEMPERATURE_WARN)
-            return FindErrorIndex(ERR_TEMPERATURE_IDLER_WARNING_TMC_TOO_HOT);
+            return FindErrorIndex(ERR_TEMPERATURE_WARNING_TMC_IDLER_TOO_HOT);
         if (ec & (uint16_t)ErrorCode::TMC_OVER_TEMPERATURE_ERROR)
-            return FindErrorIndex(ERR_TEMPERATURE_IDLER_TMC_OVERHEAT_ERROR);
+            return FindErrorIndex(ERR_TEMPERATURE_TMC_IDLER_OVERHEAT_ERROR);
     }
 
     // if nothing got caught, return a generic runtime error
-    return FindErrorIndex(ERR_SYSTEM_FW_RUNTIME_ERROR);
+    return FindErrorIndex(ERR_OTHER_UNKNOWN_ERROR);
 }
 
 uint16_t PrusaErrorCode(uint8_t i){
@@ -195,14 +195,14 @@ Buttons ButtonAvailable(uint16_t ec) {
     uint8_t ei = PrusaErrorCodeIndex(ec);
     
     // The list of responses which occur in mmu error dialogs
-    // Return button index or perform some action on the MK3 by itself (like restart MMU)
+    // Return button index or perform some action on the MK3 by itself (like Reset MMU)
     // Based on Prusa-Error-Codes errors_list.h
     // So far hardcoded, but shall be generated in the future
     switch ( PrusaErrorCode(ei) ) {
     case ERR_MECHANICAL_FINDA_DIDNT_TRIGGER:
-    case ERR_MECHANICAL_FINDA_DIDNT_GO_OFF:
+    case ERR_MECHANICAL_FINDA_FILAMENT_STUCK:
     case ERR_MECHANICAL_FSENSOR_DIDNT_TRIGGER:
-    case ERR_MECHANICAL_FSENSOR_DIDNT_GO_OFF:
+    case ERR_MECHANICAL_FSENSOR_FILAMENT_STUCK:
     case ERR_MECHANICAL_FSENSOR_TOO_EARLY:
     case ERR_MECHANICAL_INSPECT_FINDA:
     case ERR_MECHANICAL_SELECTOR_CANNOT_HOME:
@@ -228,49 +228,49 @@ Buttons ButtonAvailable(uint16_t ec) {
             break;
         }
         break;
-    case ERR_TEMPERATURE_PULLEY_WARNING_TMC_TOO_HOT:
-    case ERR_TEMPERATURE_SELECTOR_WARNING_TMC_TOO_HOT:
-    case ERR_TEMPERATURE_IDLER_WARNING_TMC_TOO_HOT:
+    case ERR_TEMPERATURE_WARNING_TMC_PULLEY_TOO_HOT:
+    case ERR_TEMPERATURE_WARNING_TMC_SELECTOR_TOO_HOT:
+    case ERR_TEMPERATURE_WARNING_TMC_IDLER_TOO_HOT:
         switch (buttonSelectedOperation) {
         case ButtonOperations::Continue: // "Continue"
             return Left;
-        case ButtonOperations::RestartMMU: // "Restart MMU"
-            return RestartMMU;
+        case ButtonOperations::ResetMMU: // "Reset MMU"
+            return ResetMMU;
         default:
             break;
         }
         break;
         
-    case ERR_TEMPERATURE_PULLEY_TMC_OVERHEAT_ERROR:
-    case ERR_TEMPERATURE_SELECTOR_TMC_OVERHEAT_ERROR:
-    case ERR_TEMPERATURE_IDLER_TMC_OVERHEAT_ERROR:
+    case ERR_TEMPERATURE_TMC_PULLEY_OVERHEAT_ERROR:
+    case ERR_TEMPERATURE_TMC_SELECTOR_OVERHEAT_ERROR:
+    case ERR_TEMPERATURE_TMC_IDLER_OVERHEAT_ERROR:
         
-    case ERR_ELECTRICAL_PULLEY_TMC_DRIVER_ERROR:
-    case ERR_ELECTRICAL_SELECTOR_TMC_DRIVER_ERROR:
-    case ERR_ELECTRICAL_IDLER_TMC_DRIVER_ERROR:
+    case ERR_ELECTRICAL_TMC_PULLEY_DRIVER_ERROR:
+    case ERR_ELECTRICAL_TMC_SELECTOR_DRIVER_ERROR:
+    case ERR_ELECTRICAL_TMC_IDLER_DRIVER_ERROR:
         
-    case ERR_ELECTRICAL_PULLEY_TMC_DRIVER_RESET:
-    case ERR_ELECTRICAL_SELECTOR_TMC_DRIVER_RESET:
-    case ERR_ELECTRICAL_IDLER_TMC_DRIVER_RESET:
+    case ERR_ELECTRICAL_TMC_PULLEY_DRIVER_RESET:
+    case ERR_ELECTRICAL_TMC_SELECTOR_DRIVER_RESET:
+    case ERR_ELECTRICAL_TMC_IDLER_DRIVER_RESET:
         
-    case ERR_ELECTRICAL_PULLEY_TMC_UNDERVOLTAGE_ERROR:
-    case ERR_ELECTRICAL_SELECTOR_TMC_UNDERVOLTAGE_ERROR:
-    case ERR_ELECTRICAL_IDLER_TMC_UNDERVOLTAGE_ERROR:
+    case ERR_ELECTRICAL_TMC_PULLEY_UNDERVOLTAGE_ERROR:
+    case ERR_ELECTRICAL_TMC_SELECTOR_UNDERVOLTAGE_ERROR:
+    case ERR_ELECTRICAL_TMC_IDLER_UNDERVOLTAGE_ERROR:
         
-    case ERR_ELECTRICAL_PULLEY_TMC_DRIVER_SHORTED:
-    case ERR_ELECTRICAL_SELECTOR_TMC_DRIVER_SHORTED:
-    case ERR_ELECTRICAL_IDLER_TMC_DRIVER_SHORTED:
+    case ERR_ELECTRICAL_TMC_PULLEY_DRIVER_SHORTED:
+    case ERR_ELECTRICAL_TMC_SELECTOR_DRIVER_SHORTED:
+    case ERR_ELECTRICAL_TMC_IDLER_DRIVER_SHORTED:
 
-    case ERR_ELECTRICAL_PULLEY_SELFTEST_FAILED:
-    case ERR_ELECTRICAL_SELECTOR_SELFTEST_FAILED:
-    case ERR_ELECTRICAL_IDLER_SELFTEST_FAILED:
+    case ERR_ELECTRICAL_MMU_PULLEY_SELFTEST_FAILED:
+    case ERR_ELECTRICAL_MMU_SELECTOR_SELFTEST_FAILED:
+    case ERR_ELECTRICAL_MMU_IDLER_SELFTEST_FAILED:
 
     case ERR_SYSTEM_QUEUE_FULL:
     case ERR_SYSTEM_FW_RUNTIME_ERROR:
-    case ERR_ELECTRICAL_MCU_UNDERVOLTAGE_VCC:
+    case ERR_ELECTRICAL_MMU_MCU_ERROR:
         switch (buttonSelectedOperation) {
-        case ButtonOperations::RestartMMU: // "Restart MMU"
-            return RestartMMU;
+        case ButtonOperations::ResetMMU: // "Reset MMU"
+            return ResetMMU;
         default:
             break;
         }
@@ -281,8 +281,8 @@ Buttons ButtonAvailable(uint16_t ec) {
         switch (buttonSelectedOperation) {
         case ButtonOperations::DisableMMU: // "Disable"
             return DisableMMU;
-        case ButtonOperations::RestartMMU: // "RestartMMU"
-            return RestartMMU;
+        case ButtonOperations::ResetMMU: // "ResetMMU"
+            return ResetMMU;
         default:
             break;
         }
@@ -302,8 +302,8 @@ Buttons ButtonAvailable(uint16_t ec) {
         switch (buttonSelectedOperation) {
         case ButtonOperations::StopPrint: // "Stop print"
             return StopPrint;
-        case ButtonOperations::RestartMMU: // "Restart MMU"
-            return RestartMMU;
+        case ButtonOperations::ResetMMU: // "Reset MMU"
+            return ResetMMU;
         default:
             break;
         }

Firmware/mmu2_protocol_logic.cpp

@@ -20,7 +20,7 @@ namespace MMU2 {
 /// Changing the supportedMmuVersion numbers requires patching MSG_DESC_FW_UPDATE_NEEDED and all its related translations by hand.
 ///
 /// The message reads:
-///   "The MMU firmware version incompatible with the printer's FW. Update to version 2.1.6."
+///   "MMU FW version is incompatible with printer FW.Update to version 2.1.9."
 ///
 /// Currently, this is not possible to perform automatically at compile time with the existing languages/translations infrastructure.
 /// To save space a "dumb" solution was chosen + a few static_assert checks in errors_list.h preventing the code from compiling when the string doesn't match.

Firmware/mmu2_supported_version.h

@@ -3,8 +3,8 @@
 
 namespace MMU2 {
 
-static constexpr uint8_t mmuVersionMajor = 2;
-static constexpr uint8_t mmuVersionMinor = 1;
-static constexpr uint8_t mmuVersionPatch = 9;
+static constexpr uint8_t mmuVersionMajor = 3;
+static constexpr uint8_t mmuVersionMinor = 0;
+static constexpr uint8_t mmuVersionPatch = 0;
 
 } // namespace MMU2

Firmware/printers.h

@@ -31,10 +31,14 @@
 #define PRINTER_MK3_NAME           "MK3"
 #define PRINTER_MK3_MMU2           20300
 #define PRINTER_MK3_MMU2_NAME      "MK3MMU2"
+#define PRINTER_MK3_MMU3           30300
+#define PRINTER_MK3_MMU3_NAME      "MK3MMU3"
 // *** MK3S
 #define PRINTER_MK3S     		302
 #define PRINTER_MK3S_NAME          "MK3S"
 #define PRINTER_MK3S_MMU2          20302
 #define PRINTER_MK3S_MMU2_NAME     "MK3SMMU2S"
+#define PRINTER_MK3S_MMU3          30302
+#define PRINTER_MK3S_MMU3_NAME     "MK3SMMU3"
 
 #endif //PRINTERS_H

Firmware/temp_model/e3d_REVO.h

@@ -12,8 +12,8 @@
 #define TEMP_MODEL_E3D_REVO_fS 0.15    // sim. 1st order IIR filter factor (f=100/27)
 #define TEMP_MODEL_E3D_REVO_LAG 270    // sim. response lag (ms, 0-2160)
 
-#define TEMP_MODEL_E3D_REVO_W 1.2      // Default warning threshold (K/s)
-#define TEMP_MODEL_E3D_REVO_E 1.74     // Default error threshold (K/s)
+#define TEMP_MODEL_E3D_REVO_W 0.85     // Default warning threshold (K/s)
+#define TEMP_MODEL_E3D_REVO_E 1.23     // Default error threshold (K/s)
 
 // fall-back resistance vector (R0-15)
 #define TEMP_MODEL_E3D_REVO_Rv {TEMP_MODEL_E3D_REVO_R, 23.9, 22.5, 19.6, 19.0, 18.3, 17.7, 17.1, 16.8, 16.5, 16.3, 16.0, 15.9, 15.7, 15.6, 15.4}

Firmware/temp_model/e3d_REVO_HF_60W.h

@@ -0,0 +1,19 @@
+#pragma once
+
+#define TEMP_MODEL_E3D_REVO_HF_60W_VER 1      // model parameters version
+
+#define TEMP_MODEL_E3D_REVO_HF_60W_P 60.      // heater power (W)
+#define TEMP_MODEL_E3D_REVO_HF_60W_U -0.0014  // linear temperature coefficient (W/K/power)
+#define TEMP_MODEL_E3D_REVO_HF_60W_V 1.05     // linear temperature intercept (W/power)
+
+#define TEMP_MODEL_E3D_REVO_HF_60W_C 9.10     // initial guess for heatblock capacitance (J/K)
+#define TEMP_MODEL_E3D_REVO_HF_60W_R 30.6     // initial guess for heatblock resistance (K/W)
+
+#define TEMP_MODEL_E3D_REVO_HF_60W_fS 0.15    // sim. 1st order IIR filter factor (f=100/27)
+#define TEMP_MODEL_E3D_REVO_HF_60W_LAG 270    // sim. response lag (ms, 0-2160)
+
+#define TEMP_MODEL_E3D_REVO_HF_60W_W 0.85     // Default warning threshold (K/s)
+#define TEMP_MODEL_E3D_REVO_HF_60W_E 1.23     // Default error threshold (K/s)
+
+// fall-back resistance vector (R0-15)
+#define TEMP_MODEL_E3D_REVO_HF_60W_Rv {TEMP_MODEL_E3D_REVO_HF_60W_R, 29.0, 27.5, 24.5, 23.4, 22.3, 21.2, 20.2, 19.8, 19.4, 19.0, 18.6, 18.3, 18.1, 17.9, 17.7}

Firmware/temperature.cpp

@@ -390,7 +390,10 @@ void __attribute__((noinline)) PID_autotune(float temp, int extruder, int ncycle
         }
       } 
     }
-    if(input > (temp + 20)) {
+    #ifndef MAX_OVERSHOOT_PID_AUTOTUNE
+      #define MAX_OVERSHOOT_PID_AUTOTUNE 20
+    #endif
+    if(input > (temp + MAX_OVERSHOOT_PID_AUTOTUNE)) {
       SERIAL_PROTOCOLLNPGM("PID Autotune failed! Temperature too high");
 	  pid_tuning_finished = true;
 	  pid_cycle = 0;

Firmware/util.cpp

@@ -407,16 +407,19 @@ return pStrBegin;
 }
 
 void printer_smodel_check(const char *pStrPos, const char *actualPrinterSModel) {
-char* pResult;
-size_t nLength,nPrinterNameLength;
+    char* pResult;
+    size_t nLength;
+    size_t aLength;
 
-nPrinterNameLength = strlen_P(actualPrinterSModel);
-pResult=code_string(pStrPos,&nLength);
+    pResult=code_string(pStrPos,&nLength);
+    if(pResult != NULL) {
+        aLength=strlen_P(actualPrinterSModel);
+        if(aLength > nLength) nLength = aLength;
 
-if(pResult != NULL && nLength == nPrinterNameLength) {
-     // Only compare them if the lengths match
-     if (strncmp_P(pResult, actualPrinterSModel, nLength) == 0) return;
-}
+        // Only compare first 6 chars on MK3|MK3S if string longer than 4 characters
+        if (nLength > 4 && strncmp_P(pResult, PSTR("MK3"), 3) == 0) nLength = 6;
+        if (strncmp_P(pResult, actualPrinterSModel, nLength) == 0) return;
+    }
 
     render_M862_warnings(
         _T(MSG_GCODE_DIFF_PRINTER_CONTINUE)

Firmware/variants/1_75mm_MK3-EINSy10a-E3DREVO.h

@@ -12,8 +12,8 @@
 #define PRINTER_TYPE PRINTER_MK3
 #define PRINTER_NAME PRINTER_MK3_NAME
 #define PRINTER_NAME_ALTERNATE PRINTER_MK3S_NAME //the other similar printer to this.
-#define PRINTER_MMU_TYPE PRINTER_MK3_MMU2
-#define PRINTER_MMU_NAME PRINTER_MK3_MMU2_NAME
+#define PRINTER_MMU_TYPE PRINTER_MK3_MMU3
+#define PRINTER_MMU_NAME PRINTER_MK3_MMU3_NAME
 #define FILAMENT_SIZE "1_75mm_MK3"
 #define NOZZLE_TYPE "E3DREVO"
 

Firmware/variants/1_75mm_MK3-EINSy10a-E3DREVO_HF_60W.h

@@ -0,0 +1,669 @@
+#ifndef CONFIGURATION_PRUSA_H
+#define CONFIGURATION_PRUSA_H
+
+#include <limits.h>
+
+#include "printers.h"
+/*------------------------------------
+ GENERAL SETTINGS
+ *------------------------------------*/
+
+// Printer revision
+#define PRINTER_TYPE PRINTER_MK3
+#define PRINTER_NAME PRINTER_MK3_NAME
+#define PRINTER_NAME_ALTERNATE PRINTER_MK3S_NAME //the other similar printer to this.
+#define PRINTER_MMU_TYPE PRINTER_MK3_MMU3
+#define PRINTER_MMU_NAME PRINTER_MK3_MMU3_NAME
+#define FILAMENT_SIZE "1_75mm_MK3"
+#define NOZZLE_TYPE "E3DREVO_HF_60W"
+
+// Printer name
+#define CUSTOM_MENDEL_NAME "Prusa MK3-RHF60"
+
+// Electronics
+#define MOTHERBOARD BOARD_EINSY_1_0a
+#define STEEL_SHEET
+#define HAS_SECOND_SERIAL_PORT
+
+
+// Uncomment the below for the E3D PT100 temperature sensor (with or without PT100 Amplifier)
+//#define E3D_PT100_EXTRUDER_WITH_AMP
+//#define E3D_PT100_EXTRUDER_NO_AMP
+//#define E3D_PT100_BED_WITH_AMP
+//#define E3D_PT100_BED_NO_AMP
+
+
+/*------------------------------------
+ AXIS SETTINGS
+ *------------------------------------*/
+
+// Steps per unit {X,Y,Z,E}
+//#define DEFAULT_AXIS_STEPS_PER_UNIT   {100,100,3200/8,140}
+#define DEFAULT_AXIS_STEPS_PER_UNIT   {100,100,3200/8,280}
+//#define DEFAULT_AXIS_STEPS_PER_UNIT   {100,100,3200/8,560}
+
+// Endstop inverting
+#define X_MIN_ENDSTOP_INVERTING 0 // set to 1 to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING 0 // set to 1 to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING 0 // set to 1 to invert the logic of the endstop.
+
+// Direction inverting
+#define INVERT_X_DIR 1    // for Mendel set to 0, for Orca set to 1
+#define INVERT_Y_DIR 0    // for Mendel set to 1, for Orca set to 0
+#define INVERT_Z_DIR 1     // for Mendel set to 0, for Orca set to 1
+#define INVERT_E0_DIR 0   // for direct drive extruder v9 set to 1, for geared extruder set to 0
+
+// Home position
+#define MANUAL_X_HOME_POS 0
+#define MANUAL_Y_HOME_POS -2.2
+#define MANUAL_Z_HOME_POS 0.2
+
+// Travel limits after homing
+#define X_MAX_POS 255
+#define X_MIN_POS 0
+#define Y_MAX_POS 212.5
+#define Y_MIN_POS -4 //orig -4
+#define Z_MAX_POS 210
+#define Z_MIN_POS 0.15
+
+// Canceled home position
+#define X_CANCEL_POS 50
+#define Y_CANCEL_POS 190
+#define Z_CANCEL_LIFT 50
+
+//Pause print position
+#define X_PAUSE_POS 50
+#define Y_PAUSE_POS 190
+#define Z_PAUSE_LIFT 20
+
+#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
+#define HOMING_FEEDRATE {3000, 3000, 800, 0}  // set the homing speeds (mm/min) // 3000 is also valid for stallGuard homing. Valid range: 2200 - 3000
+
+//#define DEFAULT_Y_OFFSET    4.f // Default distance of Y_MIN_POS point from endstop, when the printer is not calibrated.
+/**
+ * [0,0] steel sheet print area point X coordinate in bed print area coordinates
+ */
+#define SHEET_PRINT_ZERO_REF_X 0.f
+/**
+ * [0,0] steel sheet print area point Y coordinate in bed print area coordinates
+ */
+#define SHEET_PRINT_ZERO_REF_Y -2.f
+
+#define DEFAULT_MAX_FEEDRATE                {200, 200, 12, 120}      // (mm/sec)   max feedrate (M203)
+#define DEFAULT_MAX_FEEDRATE_SILENT         {100, 100, 12, 120}      // (mm/sec)   max feedrate (M203), silent mode
+
+#define DEFAULT_MAX_ACCELERATION            {1000, 1000, 200, 5000}  // (mm/sec^2) max acceleration (M201)
+#define DEFAULT_MAX_ACCELERATION_SILENT     {960, 960, 200, 5000}    // (mm/sec^2) max acceleration (M201), silent mode
+
+
+#define DEFAULT_ACCELERATION          1250   // X, Y, Z and E max acceleration in mm/s^2 for printing moves (M204P)
+#define DEFAULT_RETRACT_ACCELERATION  1250   // X, Y, Z and E max acceleration in mm/s^2 for retracts (M204R)
+#define DEFAULT_TRAVEL_ACCELERATION   1250   // X, Y, Z and E max acceleration in mm/s^2 for travels (M204T)
+
+#define MANUAL_FEEDRATE {2700, 2700, 1000, 100}   // set the speeds for manual moves (mm/min)
+
+//Silent mode limits
+#define SILENT_MAX_ACCEL_XY      960ul  // max acceleration in silent mode in mm/s^2
+#define SILENT_MAX_FEEDRATE_XY   100  // max feedrate in mm/s
+
+//Normal mode limits
+#define NORMAL_MAX_ACCEL_XY     2500ul  // max acceleration in normal mode in mm/s^2
+#define NORMAL_MAX_FEEDRATE_XY   200  // max feedrate in mm/s
+
+//number of bytes from end of the file to start check
+#define END_FILE_SECTION 20000
+
+#define Z_AXIS_ALWAYS_ON 1
+
+//Crash detection
+#define CRASHDET_TIMER 45 //seconds
+#define CRASHDET_COUNTER_MAX 3 
+
+// New XYZ calibration
+#define NEW_XYZCAL
+
+// Watchdog support
+#define WATCHDOG
+
+// Power panic
+#define UVLO_SUPPORT
+
+// Fan check
+#define FANCHECK
+
+// Safety timer
+#define SAFETYTIMER
+#define DEFAULT_SAFETYTIMER_TIME_MINS 30
+
+// Offline crash dumper
+#define XFLASH_DUMP     // enable dump functionality (including D20/D21/D22)
+#define MENU_DUMP       // enable "Memory dump" in Settings menu
+#define EMERGENCY_DUMP  // trigger crash on stack corruption and WDR
+
+// Online crash dumper
+//#define EMERGENCY_SERIAL_DUMP   // Request dump via serial on stack corruption and WDR
+//#define MENU_SERIAL_DUMP        // Enable "Memory dump" in Settings menu
+
+// Filament sensor
+#define FILAMENT_SENSOR
+#define FILAMENT_SENSOR_TYPE FSENSOR_PAT9125
+#define FSENSOR_PROBING
+
+// Backlash - 
+//#define BACKLASH_X
+//#define BACKLASH_Y
+
+
+// Minimum ambient temperature limit to start triggering MINTEMP errors [C]
+// this value is litlebit higher that real limit, because ambient termistor is on the board and is temperated from it,
+// temperature inside the case is around 31C for ambient temperature 25C, when the printer is powered on long time and idle
+// the real limit is 15C (same as MINTEMP limit), this is because 15C is end of scale for both used thermistors (bed, heater)
+#define MINTEMP_MINAMBIENT      10
+#define MINTEMP_MINAMBIENT_RAW  1002
+
+#define DEBUG_DCODE2
+#define DEBUG_DCODE3
+#define DEBUG_DCODE6
+
+//#define DEBUG_PULLUP_CRASH //Test Pullup crash
+
+//#define DEBUG_BUILD
+//#define DEBUG_SEC_LANG   //secondary language debug output at startup
+//#define DEBUG_XFLASH   //debug external spi flash
+#ifdef DEBUG_BUILD
+//#define _NO_ASM
+#define DEBUG_DCODES //D codes
+#define DEBUG_STACK_MONITOR        //Stack monitor in stepper ISR
+//#define DEBUG_CRASHDET_COUNTERS  //Display crash-detection counters on LCD
+//#define DEBUG_RESUME_PRINT       //Resume/save print debug enable 
+//#define DEBUG_UVLO_AUTOMATIC_RECOVER // Power panic automatic recovery debug output 
+//#define DEBUG_DISABLE_XMINLIMIT  //x min limit ignored
+//#define DEBUG_DISABLE_XMAXLIMIT  //x max limit ignored
+//#define DEBUG_DISABLE_YMINLIMIT  //y min limit ignored
+//#define DEBUG_DISABLE_YMAXLIMIT  //y max limit ignored
+//#define DEBUG_DISABLE_ZMINLIMIT  //z min limit ignored
+//#define DEBUG_DISABLE_ZMAXLIMIT  //z max limit ignored
+#define DEBUG_DISABLE_STARTMSGS //no startup messages 
+//#define DEBUG_DISABLE_MINTEMP   //mintemp error ignored
+//#define DEBUG_DISABLE_SWLIMITS  //sw limits ignored
+//#define DEBUG_DISABLE_LCD_STATUS_LINE  //empty four lcd line
+//#define DEBUG_DISABLE_PREVENT_EXTRUDER //cold extrusion and long extrusion allowed
+//#define DEBUG_DISABLE_FORCE_SELFTEST //disable force selftest
+//#define DEBUG_XSTEP_DUP_PIN 21   //duplicate x-step output to pin 21 (SCL on P3)
+//#define DEBUG_YSTEP_DUP_PIN 21   //duplicate y-step output to pin 21 (SCL on P3)
+//#define DEBUG_DISABLE_FANCHECK     //disable fan check (no ISR INT7, check disabled)
+//#define DEBUG_DISABLE_FSENSORCHECK //disable fsensor check (no ISR INT7, check disabled)
+#define DEBUG_DUMP_TO_2ND_SERIAL   //dump received characters to 2nd serial line
+#define DEBUG_STEPPER_TIMER_MISSED // Stop on stepper timer overflow, beep and display a message.
+#define PLANNER_DIAGNOSTICS // Show the planner queue status on printer display.
+#define CMD_DIAGNOSTICS //Show cmd queue length on printer display
+#endif /* DEBUG_BUILD */
+
+
+#define LINEARITY_CORRECTION
+#define TMC2130_LINEARITY_CORRECTION
+#define TMC2130_LINEARITY_CORRECTION_XYZ
+#define TMC2130_VARIABLE_RESOLUTION
+
+
+
+/*------------------------------------
+ TMC2130 default settings
+ *------------------------------------*/
+
+#define TMC2130_FCLK 12000000       // fclk = 12MHz
+
+#define TMC2130_USTEPS_XY   16        // microstep resolution for XY axes
+#define TMC2130_USTEPS_Z    16        // microstep resolution for Z axis
+#define TMC2130_USTEPS_E    32        // microstep resolution for E axis
+#define TMC2130_INTPOL_XY   1         // extrapolate 256 for XY axes
+#define TMC2130_INTPOL_Z    1         // extrapolate 256 for Z axis
+#define TMC2130_INTPOL_E    1         // extrapolate 256 for E axis
+// #define ALLOW_ALL_MRES
+
+#define TMC2130_PWM_GRAD_X  2         // PWMCONF
+#define TMC2130_PWM_AMPL_X  230       // PWMCONF
+#define TMC2130_PWM_AUTO_X  1         // PWMCONF
+#define TMC2130_PWM_FREQ_X  2         // PWMCONF
+
+#define TMC2130_PWM_GRAD_Y  2         // PWMCONF
+#define TMC2130_PWM_AMPL_Y  235       // PWMCONF
+#define TMC2130_PWM_AUTO_Y  1         // PWMCONF
+#define TMC2130_PWM_FREQ_Y  2         // PWMCONF
+
+#define TMC2130_PWM_GRAD_Z  4         // PWMCONF
+#define TMC2130_PWM_AMPL_Z  200       // PWMCONF
+#define TMC2130_PWM_AUTO_Z  1         // PWMCONF
+#define TMC2130_PWM_FREQ_Z  2         // PWMCONF
+
+#define TMC2130_PWM_GRAD_E  4         // PWMCONF
+#define TMC2130_PWM_AMPL_E  240       // PWMCONF
+#define TMC2130_PWM_AUTO_E  1         // PWMCONF
+#define TMC2130_PWM_FREQ_E  2         // PWMCONF
+
+// experimental setting for E-motor cooler operation
+#define TMC2130_PWM_GRAD_Ecool  84        // PWMCONF 730mA @ 375mm/min  970mA phase peak at feedrate 900mm/min
+#define TMC2130_PWM_AMPL_Ecool  43        // PWMCONF 500mA phase peak at feedrate 10 mm/min
+#define TMC2130_PWM_AUTO_Ecool  0         // PWMCONF
+
+#define TMC2130_TOFF_XYZ    3         // CHOPCONF // fchop = 27.778kHz
+#define TMC2130_TOFF_E      3         // CHOPCONF // fchop = 27.778kHz
+//#define TMC2130_TOFF_E      4         // CHOPCONF // fchop = 21.429kHz
+//#define TMC2130_TOFF_E      5         // CHOPCONF // fchop = 17.442kHz
+
+//#define TMC2130_STEALTH_E // Extruder stealthChop mode
+//#define TMC2130_CNSTOFF_E // Extruder constant-off-time mode (similar to MK2)
+
+//#define TMC2130_PWM_DIV   683         // PWM frequency divider (1024, 683, 512, 410)
+#define TMC2130_PWM_DIV   512         // PWM frequency divider (1024, 683, 512, 410)
+#define TMC2130_PWM_CLK   (2 * TMC2130_FCLK / TMC2130_PWM_DIV) // PWM frequency (23.4kHz, 35.1kHz, 46.9kHz, 58.5kHz for 12MHz fclk)
+
+#define TMC2130_TPWMTHRS  0         // TPWMTHRS - Sets the switching speed threshold based on TSTEP from stealthChop to spreadCycle mode
+#define TMC2130_TPWMTHRS_E 403      // Switch extruder from StealthChop to SpreadCycle at around 900mm/min
+#define TMC2130_THIGH     0         // THIGH - unused
+
+//#define TMC2130_TCOOLTHRS_X 450       // TCOOLTHRS - coolstep treshold
+//#define TMC2130_TCOOLTHRS_Y 450       // TCOOLTHRS - coolstep treshold
+#define TMC2130_TCOOLTHRS_X 430       // TCOOLTHRS - coolstep treshold
+#define TMC2130_TCOOLTHRS_Y 430       // TCOOLTHRS - coolstep treshold
+#define TMC2130_TCOOLTHRS_Z 500       // TCOOLTHRS - coolstep treshold
+#define TMC2130_TCOOLTHRS_E 500       // TCOOLTHRS - coolstep treshold
+
+#define TMC2130_SG_HOMING       1     // stallguard homing
+#define TMC2130_SG_THRS_X       3     // stallguard sensitivity for X axis
+#define TMC2130_SG_THRS_Y       3     // stallguard sensitivity for Y axis
+#define TMC2130_SG_THRS_Z       4     // stallguard sensitivity for Z axis
+#define TMC2130_SG_THRS_E       3     // stallguard sensitivity for E axis
+#define TMC2130_SG_THRS_HOME {3, 3, TMC2130_SG_THRS_Z, TMC2130_SG_THRS_E}
+
+//new settings is possible for vsense = 1, running current value > 31 set vsense to zero and shift both currents by 1 bit right (Z axis only)
+#define TMC2130_CURRENTS_H {16, 20, 35, 30}  // default holding currents for all axes
+#define TMC2130_CURRENTS_FARM 36             // E 805 mA peak for ECool/farm mode
+#define TMC2130_CURRENTS_R {16, 20, 35, 30}  // default running currents for all axes
+#define TMC2130_CURRENTS_R_HOME {8, 10, 20, 18}  // homing running currents for all axes
+
+#define TMC2130_STEALTH_Z
+#define TMC2130_DEDGE_STEPPING
+
+//#define TMC2130_SERVICE_CODES_M910_M918
+
+//#define TMC2130_DEBUG
+//#define TMC2130_DEBUG_WR
+//#define TMC2130_DEBUG_RD
+
+
+/*------------------------------------
+ EXTRUDER SETTINGS
+ *------------------------------------*/
+
+// Mintemps
+#define HEATER_0_MINTEMP 10
+#define HEATER_MINTEMP_DELAY 15000                // [ms] ! if changed, check maximal allowed value @ ShortTimer
+#if HEATER_MINTEMP_DELAY>USHRT_MAX
+#error "Check maximal allowed value @ ShortTimer (see HEATER_MINTEMP_DELAY definition)"
+#endif
+#define BED_MINTEMP 10
+#define BED_MINTEMP_DELAY 50000                   // [ms] ! if changed, check maximal allowed value @ ShortTimer
+#if BED_MINTEMP_DELAY>USHRT_MAX
+#error "Check maximal allowed value @ ShortTimer (see BED_MINTEMP_DELAY definition)"
+#endif
+#define SUPERPINDA_SUPPORT
+#define PINDA_MINTEMP 10
+//#define PINDA_TEMP_COMP //Used to enable SuperPINDA toggle menu/function
+#define AMBIENT_MINTEMP -30
+
+// Maxtemps
+#if defined(E3D_PT100_EXTRUDER_WITH_AMP) || defined(E3D_PT100_EXTRUDER_NO_AMP)
+#define HEATER_0_MAXTEMP 410
+#else
+#define HEATER_0_MAXTEMP 305
+#endif
+#define BED_MAXTEMP 125
+#define AMBIENT_MAXTEMP 100
+
+#if defined(E3D_PT100_EXTRUDER_WITH_AMP) || defined(E3D_PT100_EXTRUDER_NO_AMP)
+// Define PID constants for extruder with PT100
+#define  DEFAULT_Kp 21.70
+#define  DEFAULT_Ki 1.60
+#define  DEFAULT_Kd 73.76
+#else
+// Define PID constants for E3D REVO HF 60W
+#define  MAX_OVERSHOOT_PID_AUTOTUNE 30
+#define  DEFAULT_Kp 15.00
+#define  DEFAULT_Ki 2.9
+#define  DEFAULT_Kd 19.2
+#endif
+
+// Extrude mintemp
+#define EXTRUDE_MINTEMP 175
+
+// Extruder cooling fans
+#define EXTRUDER_0_AUTO_FAN_PIN   8
+#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
+#define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
+
+#define FANCHECK_AUTO_PRINT_FAN_THRS 70 //[RPS] - Used during selftest to identify swapped fans automatically
+#define FANCHECK_AUTO_FAIL_THRS 20 //[RPS] - Used during selftest to identify a faulty fan
+
+/*------------------------------------
+ CHANGE FILAMENT SETTINGS
+ *------------------------------------*/
+
+// Filament change configuration
+#define FILAMENTCHANGEENABLE
+#ifdef FILAMENTCHANGEENABLE
+#define FILAMENTCHANGE_XPOS 211
+#define FILAMENTCHANGE_YPOS 0
+#define FILAMENTCHANGE_ZADD 2
+#define FILAMENTCHANGE_FIRSTRETRACT -2
+#define FILAMENTCHANGE_FINALRETRACT 0
+
+#define FILAMENTCHANGE_FIRSTFEED 70 //E distance in mm for fast filament loading sequence used used in filament change (M600)
+#define FILAMENTCHANGE_FINALFEED 25 //E distance in mm for slow filament loading sequence used used in filament change (M600) and filament load (M701) 
+#define FILAMENTCHANGE_RECFEED 5
+
+#define FILAMENTCHANGE_XYFEED 50
+#define FILAMENTCHANGE_EFEED_FIRST 20 // feedrate in mm/s for fast filament loading sequence used in filament change (M600)
+#define FILAMENTCHANGE_EFEED_FINAL 3.3f // feedrate in mm/s for slow filament loading sequence used in filament change (M600) and filament load (M701) 
+//#define FILAMENTCHANGE_RFEED 400
+#define FILAMENTCHANGE_RFEED 7000 / 60
+#define FILAMENTCHANGE_EXFEED 2
+#define FILAMENTCHANGE_ZFEED 15
+
+#endif
+
+/*------------------------------------
+ ADDITIONAL FEATURES SETTINGS
+ *------------------------------------*/
+
+// temperature runaway
+#define TEMP_RUNAWAY_BED_HYSTERESIS 5
+#define TEMP_RUNAWAY_BED_TIMEOUT 360
+
+#define TEMP_RUNAWAY_EXTRUDER_HYSTERESIS 15
+#define TEMP_RUNAWAY_EXTRUDER_TIMEOUT 45
+
+// model-based temperature check
+#define TEMP_MODEL 1              // enable model-based temperature checks
+#define TEMP_MODEL_DEBUG 1        // extended runtime logging
+
+#define TEMP_MODEL_CAL_C_low 5    // C estimation lower limit
+#define TEMP_MODEL_CAL_C_high 20  // C estimation upper limit
+#define TEMP_MODEL_CAL_C_thr 0.01 // C estimation iteration threshold
+#define TEMP_MODEL_CAL_C_itr 30   // C estimation iteration limit
+
+#define TEMP_MODEL_CAL_R_low 5    // R estimation lower limit
+#define TEMP_MODEL_CAL_R_high 50  // R estimation upper limit
+#define TEMP_MODEL_CAL_R_thr 0.01 // R estimation iteration threshold
+#define TEMP_MODEL_CAL_R_itr 30   // R estimation iteration limit
+
+#define TEMP_MODEL_CAL_T_low 50   // Default calibration cooling temperature (C)
+#define TEMP_MODEL_CAL_T_high 230 // Default calibration working temperature (C)
+
+#define TEMP_MODEL_Ta_corr -7     // Default ambient temperature correction
+
+#include "temp_model/e3d_REVO_HF_60W.h"
+#define TEMP_MODEL_DEFAULT E3D_REVO_HF_60W // Default E3D REVO HF 60W model parameters
+
+
+/*------------------------------------
+ MOTOR CURRENT SETTINGS
+ *------------------------------------*/
+
+// Motor Current settings for Einsy/tmc = 0..63
+#define MOTOR_CURRENT_PWM_RANGE 63
+
+/*------------------------------------
+ BED SETTINGS
+ *------------------------------------*/
+
+// Define Mesh Bed Leveling system to enable it
+#define MESH_BED_LEVELING
+#ifdef MESH_BED_LEVELING
+
+#define MBL_Z_STEP 0.01
+
+// Mesh definitions
+#define MESH_MIN_X 24
+#define MESH_MAX_X 228
+#define MESH_MIN_Y 6
+#define MESH_MAX_Y 210
+
+// Mesh upsample definition
+#define MESH_NUM_X_POINTS 7
+#define MESH_NUM_Y_POINTS 7
+// Mesh measure definition
+#define MESH_MEAS_NUM_X_POINTS 3
+#define MESH_MEAS_NUM_Y_POINTS 3
+
+// Maximum bed level correction value
+#define BED_ADJUSTMENT_UM_MAX 100
+
+#define MESH_HOME_Z_CALIB 0.2
+#define MESH_HOME_Z_SEARCH 5.0f           // Z lift for homing, mesh bed leveling etc.
+
+#define X_PROBE_OFFSET_FROM_EXTRUDER 23     // Z probe to nozzle X offset: -left  +right
+#define Y_PROBE_OFFSET_FROM_EXTRUDER 5     // Z probe to nozzle Y offset: -front +behind
+#define Z_PROBE_OFFSET_FROM_EXTRUDER -0.4  // Z probe to nozzle Z offset: -below (always!)
+#endif
+
+// Bed Temperature Control
+// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
+//
+// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder.
+// If your PID_dT above is the default, and correct for your hardware/configuration, that means 7.689Hz,
+// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating.
+// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater.
+// If your configuration is significantly different than this and you don't understand the issues involved, you probably
+// shouldn't use bed PID until someone else verifies your hardware works.
+// If this is enabled, find your own PID constants below.
+#define PIDTEMPBED
+//
+//#define BED_LIMIT_SWITCHING
+
+// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option.
+// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
+// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
+// so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
+#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
+
+// Bed temperature compensation settings
+#define BED_OFFSET 10
+#define BED_OFFSET_START 40
+#define BED_OFFSET_CENTER 50
+
+
+#ifdef PIDTEMPBED
+//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
+//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
+#if defined(E3D_PT100_BED_WITH_AMP) || defined(E3D_PT100_BED_NO_AMP)
+// Define PID constants for extruder with PT100
+#define  DEFAULT_bedKp 21.70
+#define  DEFAULT_bedKi 1.60
+#define  DEFAULT_bedKd 73.76
+#else
+#define  DEFAULT_bedKp 126.13
+#define  DEFAULT_bedKi 4.30
+#define  DEFAULT_bedKd 924.76
+#endif
+
+//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
+//from pidautotune
+//    #define  DEFAULT_bedKp 97.1
+//    #define  DEFAULT_bedKi 1.41
+//    #define  DEFAULT_bedKd 1675.16
+
+// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
+#endif // PIDTEMPBED
+
+/*-----------------------------------
+ PREHEAT SETTINGS
+ *------------------------------------*/
+
+#define PLA_PREHEAT_HOTEND_TEMP 215
+#define PLA_PREHEAT_HPB_TEMP 60
+
+#define PVB_PREHEAT_HOTEND_TEMP 215
+#define PVB_PREHEAT_HPB_TEMP 75
+
+#define ASA_PREHEAT_HOTEND_TEMP 260
+#define ASA_PREHEAT_HPB_TEMP 105
+
+#define PC_PREHEAT_HOTEND_TEMP 275
+#define PC_PREHEAT_HPB_TEMP 110
+
+#define PA_PREHEAT_HOTEND_TEMP 275
+#define PA_PREHEAT_HPB_TEMP 90
+
+#define ABS_PREHEAT_HOTEND_TEMP 255
+#define ABS_PREHEAT_HPB_TEMP 100
+
+#define HIPS_PREHEAT_HOTEND_TEMP 220
+#define HIPS_PREHEAT_HPB_TEMP 100
+
+#define PP_PREHEAT_HOTEND_TEMP 254
+#define PP_PREHEAT_HPB_TEMP 100
+
+#define PET_PREHEAT_HOTEND_TEMP 230
+#define PET_PREHEAT_HPB_TEMP 85
+
+#define FLEX_PREHEAT_HOTEND_TEMP 240
+#define FLEX_PREHEAT_HPB_TEMP 50
+
+/*------------------------------------
+ THERMISTORS SETTINGS
+ *------------------------------------*/
+
+//
+//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
+//
+//// Temperature sensor settings:
+// -2 is thermocouple with MAX6675 (only for sensor 0)
+// -1 is thermocouple with AD595
+// 0 is not used
+// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
+// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
+// 3 is Mendel-parts thermistor (4.7k pullup)
+// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
+// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
+// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
+// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
+// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
+// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
+// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
+// 10 is 100k RS thermistor 198-961 (4.7k pullup)
+// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
+// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
+// 13 is 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+// 20 is the PT100 circuit found in the Ultimainboard V2.x
+// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+//
+//    1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
+//                          (but gives greater accuracy and more stable PID)
+// 51 is 100k thermistor - EPCOS (1k pullup)
+// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
+// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
+//
+// 1047 is Pt1000 with 4k7 pullup
+// 1010 is Pt1000 with 1k pullup (non standard)
+// 147 is Pt100 with 4k7 pullup
+// 148 is E3D Pt100 with 4k7 pullup and no PT100 Amplifier on a MiniRambo 1.3a
+// 247 is Pt100 with 4k7 pullup and PT100 Amplifier
+// 110 is Pt100 with 1k pullup (non standard)
+
+#if defined(E3D_PT100_EXTRUDER_WITH_AMP)
+#define TEMP_SENSOR_0 247
+#elif defined(E3D_PT100_EXTRUDER_NO_AMP)
+#define TEMP_SENSOR_0 148
+#else
+#define TEMP_SENSOR_0 5
+#endif
+#if defined(E3D_PT100_BED_WITH_AMP)
+#define TEMP_SENSOR_BED 247
+#elif defined(E3D_PT100_BED_NO_AMP)
+#define TEMP_SENSOR_BED 148
+#else
+#define TEMP_SENSOR_BED 1
+#endif
+#define TEMP_SENSOR_PINDA 1
+#define TEMP_SENSOR_AMBIENT 2000
+
+#define STACK_GUARD_TEST_VALUE 0xA2A2
+#define STACK_GUARD_MARGIN     32
+
+#define MAX_BED_TEMP_CALIBRATION 50
+#define MAX_HOTEND_TEMP_CALIBRATION 50
+
+#define MAX_E_STEPS_PER_UNIT 250
+#define MIN_E_STEPS_PER_UNIT 100
+
+#define Z_BABYSTEP_MIN -3999
+#define Z_BABYSTEP_MAX 0
+
+#define PINDA_PREHEAT_X 20
+#define PINDA_PREHEAT_Y 60
+#define PINDA_PREHEAT_Z 0.15
+/*
+#define PINDA_PREHEAT_X 70
+#define PINDA_PREHEAT_Y -3
+#define PINDA_PREHEAT_Z 1*/
+#define PINDA_HEAT_T 120 //time in s
+
+#define PINDA_MIN_T 50
+#define PINDA_STEP_T 10
+#define PINDA_MAX_T 100
+
+#define LONG_PRESS_TIME 1000 //time in ms for button long press
+#define BUTTON_BLANKING_TIME 200 //time in ms for blanking after button release
+
+#define DEFAULT_PID_TEMP 210
+
+#define MIN_PRINT_FAN_SPEED 75
+
+
+// How much shall the print head be lifted on power panic?
+// Ideally the Z axis will reach a zero phase of the stepper driver on power outage. To simplify this,
+// UVLO_Z_AXIS_SHIFT shall be an integer multiply of the stepper driver cycle, that is 4x full step.
+// For example, the Prusa i3 MK2 with 16 microsteps per full step has Z stepping of 400 microsteps per mm.
+// At 400 microsteps per mm, a full step lifts the Z axis by 0.04mm, and a stepper driver cycle is 0.16mm.
+// The following example, 12 * (4 * 16 / 400) = 12 * 0.16mm = 1.92mm.
+//#define UVLO_Z_AXIS_SHIFT 1.92
+#define UVLO_Z_AXIS_SHIFT 0.64
+// When powered off during PP recovery, the Z axis position can still be re-adjusted. In this case
+// we just need to shift to the nearest fullstep, but we need a move which is at least
+// "dropsegments" steps long. All the above rules still need to apply.
+#define UVLO_TINY_Z_AXIS_SHIFT 0.16
+// If power panic occured, and the current temperature is higher then target temperature before interrupt minus this offset, print will be recovered automatically.
+#define AUTOMATIC_UVLO_BED_TEMP_OFFSET 5 
+
+#define HEATBED_V2
+
+#define M600_TIMEOUT 600  //seconds
+
+//#define SUPPORT_VERBOSITY
+
+#define MMU_CONFIG_FILE "mmu2/variants/config_MMU2.h"
+#define MMU_FILAMENT_COUNT 5
+//#define MMU_FORCE_STEALTH_MODE
+#define MMU_HWRESET
+#define MMU_DEBUG //print communication between MMU and printer on serial
+#define MMU_HAS_CUTTER
+
+// MMU Error pause position
+#define MMU_ERR_X_PAUSE_POS 125
+#define MMU_ERR_Y_PAUSE_POS 0
+#define MMU_ERR_Z_PAUSE_LIFT 20
+
+// Default Arc Interpolation Settings (Now configurable via M214)
+#define DEFAULT_N_ARC_CORRECTION       25 // Number of interpolated segments between corrections.
+/* A value of 1 or less for N_ARC_CORRECTION will trigger the use of Sin and Cos for every arc, which will improve accuracy at the
+   cost of performance*/
+#define DEFAULT_MM_PER_ARC_SEGMENT     1.0f // REQUIRED - The enforced maximum length of an arc segment
+#define DEFAULT_MIN_MM_PER_ARC_SEGMENT 0.5f //the enforced minimum length of an interpolated segment
+   /*  MIN_MM_PER_ARC_SEGMENT Must be smaller than MM_PER_ARC_SEGMENT.  Only has an effect if MIN_ARC_SEGMENTS > 0
+       or ARC_SEGMENTS_PER_SEC > 0 .  If both MIN_ARC_SEGMENTS and ARC_SEGMENTS_PER_SEC is defined, the minimum
+       calculated segment length is used. */
+#define DEFAULT_MIN_ARC_SEGMENTS 20 // The enforced minimum segments in a full circle of the same radius.  Set to 0 to disable
+#define DEFAULT_ARC_SEGMENTS_PER_SEC 0 // Use feedrate to choose segment length. Set to 0 to disable
+
+#endif //__CONFIGURATION_PRUSA_H

Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h

@@ -12,8 +12,8 @@
 #define PRINTER_TYPE PRINTER_MK3
 #define PRINTER_NAME PRINTER_MK3_NAME
 #define PRINTER_NAME_ALTERNATE PRINTER_MK3S_NAME //the other similar printer to this.
-#define PRINTER_MMU_TYPE PRINTER_MK3_MMU2
-#define PRINTER_MMU_NAME PRINTER_MK3_MMU2_NAME
+#define PRINTER_MMU_TYPE PRINTER_MK3_MMU3
+#define PRINTER_MMU_NAME PRINTER_MK3_MMU3_NAME
 #define FILAMENT_SIZE "1_75mm_MK3"
 #define NOZZLE_TYPE "E3Dv6full"
 

Firmware/variants/1_75mm_MK3S-EINSy10a-E3DREVO.h

@@ -11,8 +11,8 @@
 #define PRINTER_TYPE PRINTER_MK3S
 #define PRINTER_NAME PRINTER_MK3S_NAME
 #define PRINTER_NAME_ALTERNATE PRINTER_MK3_NAME //the other similar printer to this.
-#define PRINTER_MMU_TYPE PRINTER_MK3S_MMU2
-#define PRINTER_MMU_NAME PRINTER_MK3S_MMU2_NAME
+#define PRINTER_MMU_TYPE PRINTER_MK3S_MMU3
+#define PRINTER_MMU_NAME PRINTER_MK3S_MMU3_NAME
 #define FILAMENT_SIZE "1_75mm_MK3S"
 #define NOZZLE_TYPE "E3DREVO"
 

Firmware/variants/1_75mm_MK3S-EINSy10a-E3DREVO_HF_60W.h

@@ -0,0 +1,681 @@
+#ifndef CONFIGURATION_PRUSA_H
+#define CONFIGURATION_PRUSA_H
+
+#include <limits.h>
+#include "printers.h"
+/*------------------------------------
+ GENERAL SETTINGS
+ *------------------------------------*/
+
+// Printer revision
+#define PRINTER_TYPE PRINTER_MK3S
+#define PRINTER_NAME PRINTER_MK3S_NAME
+#define PRINTER_NAME_ALTERNATE PRINTER_MK3_NAME //the other similar printer to this.
+#define PRINTER_MMU_TYPE PRINTER_MK3S_MMU3
+#define PRINTER_MMU_NAME PRINTER_MK3S_MMU3_NAME
+#define FILAMENT_SIZE "1_75mm_MK3S"
+#define NOZZLE_TYPE "E3DREVO_HF_60W"
+
+// Printer name
+#define CUSTOM_MENDEL_NAME "Prusa MK3S-RHF60"
+
+// Electronics
+#define MOTHERBOARD BOARD_EINSY_1_0a
+#define STEEL_SHEET
+#define HAS_SECOND_SERIAL_PORT
+
+// PSU
+// #define PSU_Delta                                 // uncomment if DeltaElectronics PSU installed
+
+
+// Uncomment the below for the E3D PT100 temperature sensor (with or without PT100 Amplifier)
+//#define E3D_PT100_EXTRUDER_WITH_AMP
+//#define E3D_PT100_EXTRUDER_NO_AMP
+//#define E3D_PT100_BED_WITH_AMP
+//#define E3D_PT100_BED_NO_AMP
+
+
+/*------------------------------------
+ AXIS SETTINGS
+ *------------------------------------*/
+
+// Steps per unit {X,Y,Z,E}
+//#define DEFAULT_AXIS_STEPS_PER_UNIT   {100,100,3200/8,140}
+#define DEFAULT_AXIS_STEPS_PER_UNIT   {100,100,3200/8,280}
+//#define DEFAULT_AXIS_STEPS_PER_UNIT   {100,100,3200/8,560}
+
+// Endstop inverting
+#define X_MIN_ENDSTOP_INVERTING 0 // set to 1 to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING 0 // set to 1 to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING 0 // set to 1 to invert the logic of the endstop.
+
+// Direction inverting
+#define INVERT_X_DIR 1    // for Mendel set to 0, for Orca set to 1
+#define INVERT_Y_DIR 0    // for Mendel set to 1, for Orca set to 0
+#define INVERT_Z_DIR 1     // for Mendel set to 0, for Orca set to 1
+#define INVERT_E0_DIR 0   // for direct drive extruder v9 set to 1, for geared extruder set to 0
+
+// Home position
+#define MANUAL_X_HOME_POS 0
+#define MANUAL_Y_HOME_POS -2.2
+#define MANUAL_Z_HOME_POS 0.2
+
+// Travel limits after homing
+#define X_MAX_POS 255
+#define X_MIN_POS 0
+#define Y_MAX_POS 212.5
+#define Y_MIN_POS -4 //orig -4
+#define Z_MAX_POS 210
+#define Z_MIN_POS 0.15
+
+// Canceled home position
+#define X_CANCEL_POS 50
+#define Y_CANCEL_POS 190
+#define Z_CANCEL_LIFT 50
+
+//Pause print position
+#define X_PAUSE_POS 50
+#define Y_PAUSE_POS 190
+#define Z_PAUSE_LIFT 20
+
+#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
+#define HOMING_FEEDRATE {3000, 3000, 800, 0}  // set the homing speeds (mm/min) // 3000 is also valid for stallGuard homing. Valid range: 2200 - 3000
+
+//#define DEFAULT_Y_OFFSET    4.f // Default distance of Y_MIN_POS point from endstop, when the printer is not calibrated.
+/**
+ * [0,0] steel sheet print area point X coordinate in bed print area coordinates
+ */
+#define SHEET_PRINT_ZERO_REF_X 0.f
+/**
+ * [0,0] steel sheet print area point Y coordinate in bed print area coordinates
+ */
+#define SHEET_PRINT_ZERO_REF_Y -2.f
+
+#define DEFAULT_MAX_FEEDRATE                {200, 200, 12, 120}      // (mm/sec)   max feedrate (M203)
+#define DEFAULT_MAX_FEEDRATE_SILENT         {100, 100, 12, 120}      // (mm/sec)   max feedrate (M203), silent mode
+
+#define DEFAULT_MAX_ACCELERATION            {1000, 1000, 200, 5000}  // (mm/sec^2) max acceleration (M201)
+#define DEFAULT_MAX_ACCELERATION_SILENT     {960, 960, 200, 5000}    // (mm/sec^2) max acceleration (M201), silent mode
+
+
+#define DEFAULT_ACCELERATION          1250   // X, Y, Z and E max acceleration in mm/s^2 for printing moves (M204P)
+#define DEFAULT_RETRACT_ACCELERATION  1250   // X, Y, Z and E max acceleration in mm/s^2 for retracts (M204R)
+#define DEFAULT_TRAVEL_ACCELERATION   1250   // X, Y, Z and E max acceleration in mm/s^2 for travels (M204T)
+
+#define MANUAL_FEEDRATE {2700, 2700, 1000, 100}   // set the speeds for manual moves (mm/min)
+
+//Silent mode limits
+#define SILENT_MAX_ACCEL_XY      960ul  // max acceleration in silent mode in mm/s^2
+#define SILENT_MAX_FEEDRATE_XY   100  // max feedrate in mm/s
+
+//Normal mode limits
+#define NORMAL_MAX_ACCEL_XY     2500ul  // max acceleration in normal mode in mm/s^2
+#define NORMAL_MAX_FEEDRATE_XY   200  // max feedrate in mm/s
+
+//number of bytes from end of the file to start check
+#define END_FILE_SECTION 20000
+
+#define Z_AXIS_ALWAYS_ON 1
+
+//Crash detection
+#define CRASHDET_TIMER 45 //seconds
+#define CRASHDET_COUNTER_MAX 3 
+
+// New XYZ calibration
+#define NEW_XYZCAL
+
+// Watchdog support
+#define WATCHDOG
+
+// Power panic
+#define UVLO_SUPPORT
+
+// Fan check
+#define FANCHECK
+
+// Safety timer
+#define SAFETYTIMER
+#define DEFAULT_SAFETYTIMER_TIME_MINS 30
+
+// Offline crash dumper
+#define XFLASH_DUMP     // enable dump functionality (including D20/D21/D22)
+#define MENU_DUMP       // enable "Memory dump" in Settings menu
+#define EMERGENCY_DUMP  // trigger crash on stack corruption and WDR
+
+// Online crash dumper
+//#define EMERGENCY_SERIAL_DUMP   // Request dump via serial on stack corruption and WDR
+//#define MENU_SERIAL_DUMP        // Enable "Memory dump" in Settings menu
+
+// Filament sensor
+#define FILAMENT_SENSOR
+#define FILAMENT_SENSOR_TYPE FSENSOR_IR_ANALOG
+#define FSENSOR_PROBING
+
+// Backlash - 
+//#define BACKLASH_X
+//#define BACKLASH_Y
+
+
+// Minimum ambient temperature limit to start triggering MINTEMP errors [C]
+// this value is litlebit higher that real limit, because ambient termistor is on the board and is temperated from it,
+// temperature inside the case is around 31C for ambient temperature 25C, when the printer is powered on long time and idle
+// the real limit is 15C (same as MINTEMP limit), this is because 15C is end of scale for both used thermistors (bed, heater)
+#define MINTEMP_MINAMBIENT      10
+#define MINTEMP_MINAMBIENT_RAW  1002
+
+#define DEBUG_DCODE2
+#define DEBUG_DCODE3
+#define DEBUG_DCODE6
+
+//#define DEBUG_PULLUP_CRASH //Test Pullup crash
+
+//#define DEBUG_BUILD
+//#define DEBUG_SEC_LANG   //secondary language debug output at startup
+//#define DEBUG_XFLASH   //debug external spi flash
+#ifdef DEBUG_BUILD
+//#define _NO_ASM
+#define DEBUG_DCODES //D codes
+#define DEBUG_STACK_MONITOR        //Stack monitor in stepper ISR
+//#define DEBUG_CRASHDET_COUNTERS  //Display crash-detection counters on LCD
+//#define DEBUG_RESUME_PRINT       //Resume/save print debug enable 
+//#define DEBUG_UVLO_AUTOMATIC_RECOVER // Power panic automatic recovery debug output 
+//#define DEBUG_DISABLE_XMINLIMIT  //x min limit ignored
+//#define DEBUG_DISABLE_XMAXLIMIT  //x max limit ignored
+//#define DEBUG_DISABLE_YMINLIMIT  //y min limit ignored
+//#define DEBUG_DISABLE_YMAXLIMIT  //y max limit ignored
+//#define DEBUG_DISABLE_ZMINLIMIT  //z min limit ignored
+//#define DEBUG_DISABLE_ZMAXLIMIT  //z max limit ignored
+#define DEBUG_DISABLE_STARTMSGS //no startup messages 
+//#define DEBUG_DISABLE_MINTEMP   //mintemp error ignored
+//#define DEBUG_DISABLE_SWLIMITS  //sw limits ignored
+//#define DEBUG_DISABLE_LCD_STATUS_LINE  //empty four lcd line
+//#define DEBUG_DISABLE_PREVENT_EXTRUDER //cold extrusion and long extrusion allowed
+//#define DEBUG_DISABLE_FORCE_SELFTEST //disable force selftest
+//#define DEBUG_XSTEP_DUP_PIN 21   //duplicate x-step output to pin 21 (SCL on P3)
+//#define DEBUG_YSTEP_DUP_PIN 21   //duplicate y-step output to pin 21 (SCL on P3)
+//#define DEBUG_DISABLE_FANCHECK     //disable fan check (no ISR INT7, check disabled)
+//#define DEBUG_DISABLE_FSENSORCHECK //disable fsensor check (no ISR INT7, check disabled)
+#define DEBUG_DUMP_TO_2ND_SERIAL   //dump received characters to 2nd serial line
+#define DEBUG_STEPPER_TIMER_MISSED // Stop on stepper timer overflow, beep and display a message.
+#define PLANNER_DIAGNOSTICS // Show the planner queue status on printer display.
+#define CMD_DIAGNOSTICS //Show cmd queue length on printer display
+#endif /* DEBUG_BUILD */
+
+
+#define LINEARITY_CORRECTION
+#define TMC2130_LINEARITY_CORRECTION
+#define TMC2130_LINEARITY_CORRECTION_XYZ
+#define TMC2130_VARIABLE_RESOLUTION
+
+
+
+/*------------------------------------
+ TMC2130 default settings
+ *------------------------------------*/
+
+#define TMC2130_FCLK 12000000       // fclk = 12MHz
+
+#define TMC2130_USTEPS_XY   16        // microstep resolution for XY axes
+#define TMC2130_USTEPS_Z    16        // microstep resolution for Z axis
+#define TMC2130_USTEPS_E    32        // microstep resolution for E axis
+#define TMC2130_INTPOL_XY   1         // extrapolate 256 for XY axes
+#define TMC2130_INTPOL_Z    1         // extrapolate 256 for Z axis
+#define TMC2130_INTPOL_E    1         // extrapolate 256 for E axis
+// #define ALLOW_ALL_MRES
+
+#define TMC2130_PWM_GRAD_X  2         // PWMCONF
+#define TMC2130_PWM_AMPL_X  230       // PWMCONF
+#define TMC2130_PWM_AUTO_X  1         // PWMCONF
+#define TMC2130_PWM_FREQ_X  2         // PWMCONF
+
+#define TMC2130_PWM_GRAD_Y  2         // PWMCONF
+#define TMC2130_PWM_AMPL_Y  235       // PWMCONF
+#define TMC2130_PWM_AUTO_Y  1         // PWMCONF
+#define TMC2130_PWM_FREQ_Y  2         // PWMCONF
+
+#define TMC2130_PWM_GRAD_Z  4         // PWMCONF
+#define TMC2130_PWM_AMPL_Z  200       // PWMCONF
+#define TMC2130_PWM_AUTO_Z  1         // PWMCONF
+#define TMC2130_PWM_FREQ_Z  2         // PWMCONF
+
+#define TMC2130_PWM_GRAD_E  4         // PWMCONF
+#define TMC2130_PWM_AMPL_E  240       // PWMCONF
+#define TMC2130_PWM_AUTO_E  1         // PWMCONF
+#define TMC2130_PWM_FREQ_E  2         // PWMCONF
+
+// experimental setting for E-motor cooler operation
+#define TMC2130_PWM_GRAD_Ecool  84        // PWMCONF 730mA @ 375mm/min  970mA phase peak at feedrate 900mm/min
+#define TMC2130_PWM_AMPL_Ecool  43        // PWMCONF 500mA phase peak at feedrate 10 mm/min
+#define TMC2130_PWM_AUTO_Ecool  0         // PWMCONF
+
+#define TMC2130_TOFF_XYZ    3         // CHOPCONF // fchop = 27.778kHz
+#define TMC2130_TOFF_E      3         // CHOPCONF // fchop = 27.778kHz
+//#define TMC2130_TOFF_E      4         // CHOPCONF // fchop = 21.429kHz
+//#define TMC2130_TOFF_E      5         // CHOPCONF // fchop = 17.442kHz
+
+//#define TMC2130_STEALTH_E // Extruder stealthChop mode
+//#define TMC2130_CNSTOFF_E // Extruder constant-off-time mode (similar to MK2)
+
+//#define TMC2130_PWM_DIV   683         // PWM frequency divider (1024, 683, 512, 410)
+#define TMC2130_PWM_DIV   512         // PWM frequency divider (1024, 683, 512, 410)
+#define TMC2130_PWM_CLK   (2 * TMC2130_FCLK / TMC2130_PWM_DIV) // PWM frequency (23.4kHz, 35.1kHz, 46.9kHz, 58.5kHz for 12MHz fclk)
+
+#define TMC2130_TPWMTHRS  0         // TPWMTHRS - Sets the switching speed threshold based on TSTEP from stealthChop to spreadCycle mode
+#define TMC2130_TPWMTHRS_E 403      // Switch extruder from StealthChop to SpreadCycle at around 900mm/min
+#define TMC2130_THIGH     0         // THIGH - unused
+
+//#define TMC2130_TCOOLTHRS_X 450       // TCOOLTHRS - coolstep treshold
+//#define TMC2130_TCOOLTHRS_Y 450       // TCOOLTHRS - coolstep treshold
+#define TMC2130_TCOOLTHRS_X 430       // TCOOLTHRS - coolstep treshold
+#define TMC2130_TCOOLTHRS_Y 430       // TCOOLTHRS - coolstep treshold
+#define TMC2130_TCOOLTHRS_Z 500       // TCOOLTHRS - coolstep treshold
+#define TMC2130_TCOOLTHRS_E 500       // TCOOLTHRS - coolstep treshold
+
+#define TMC2130_SG_HOMING       1     // stallguard homing
+#define TMC2130_SG_THRS_X       3     // stallguard sensitivity for X axis
+#define TMC2130_SG_THRS_Y       3     // stallguard sensitivity for Y axis
+#define TMC2130_SG_THRS_Z       4     // stallguard sensitivity for Z axis
+#define TMC2130_SG_THRS_E       3     // stallguard sensitivity for E axis
+#define TMC2130_SG_THRS_HOME {3, 3, TMC2130_SG_THRS_Z, TMC2130_SG_THRS_E}
+
+//new settings is possible for vsense = 1, running current value > 31 set vsense to zero and shift both currents by 1 bit right (Z axis only)
+#define TMC2130_CURRENTS_H {16, 20, 35, 30}  // default holding currents for all axes
+#define TMC2130_CURRENTS_FARM 36             // E 805 mA peak for ECool/farm mode
+#define TMC2130_CURRENTS_R {16, 20, 35, 30}  // default running currents for all axes
+#define TMC2130_CURRENTS_R_HOME {8, 10, 20, 18}  // homing running currents for all axes
+
+#define TMC2130_STEALTH_Z
+#define TMC2130_DEDGE_STEPPING
+
+//#define TMC2130_SERVICE_CODES_M910_M918
+
+//#define TMC2130_DEBUG
+//#define TMC2130_DEBUG_WR
+//#define TMC2130_DEBUG_RD
+
+
+/*------------------------------------
+ EXTRUDER SETTINGS
+ *------------------------------------*/
+
+// Mintemps
+#define HEATER_0_MINTEMP 10
+#define HEATER_MINTEMP_DELAY 15000                // [ms] ! if changed, check maximal allowed value @ ShortTimer
+#if HEATER_MINTEMP_DELAY>USHRT_MAX
+#error "Check maximal allowed value @ ShortTimer (see HEATER_MINTEMP_DELAY definition)"
+#endif
+#define BED_MINTEMP 10
+#define BED_MINTEMP_DELAY 50000                   // [ms] ! if changed, check maximal allowed value @ ShortTimer
+#if BED_MINTEMP_DELAY>USHRT_MAX
+#error "Check maximal allowed value @ ShortTimer (see BED_MINTEMP_DELAY definition)"
+#endif
+#define SUPERPINDA_SUPPORT
+#define PINDA_MINTEMP 10
+//#define PINDA_TEMP_COMP //Used to enable SuperPINDA toggle menu/function
+#define AMBIENT_MINTEMP -30
+
+// Maxtemps
+#if defined(E3D_PT100_EXTRUDER_WITH_AMP) || defined(E3D_PT100_EXTRUDER_NO_AMP)
+#define HEATER_0_MAXTEMP 410
+#else
+#define HEATER_0_MAXTEMP 305
+#endif
+#define BED_MAXTEMP 125
+#define AMBIENT_MAXTEMP 100
+
+#if defined(E3D_PT100_EXTRUDER_WITH_AMP) || defined(E3D_PT100_EXTRUDER_NO_AMP)
+// Define PID constants for extruder with PT100
+#define  DEFAULT_Kp 21.70
+#define  DEFAULT_Ki 1.60
+#define  DEFAULT_Kd 73.76
+#else
+// Define PID constants for E3D REVO HF 60W
+#define  MAX_OVERSHOOT_PID_AUTOTUNE 30
+#define  DEFAULT_Kp 15.00
+#define  DEFAULT_Ki 2.9
+#define  DEFAULT_Kd 19.2
+#endif
+
+// Extrude mintemp
+#define EXTRUDE_MINTEMP 175
+
+// Extruder cooling fans
+#define EXTRUDER_0_AUTO_FAN_PIN   8
+#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
+#define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
+#define EXTRUDER_ALTFAN_DETECT
+#define EXTRUDER_ALTFAN_SPEED_SILENT 128
+
+#define FANCHECK_AUTO_PRINT_FAN_THRS 70 //[RPS] - Used during selftest to identify swapped fans automatically
+#define FANCHECK_AUTO_FAIL_THRS 20 //[RPS] - Used during selftest to identify a faulty fan
+
+/*------------------------------------
+ CHANGE FILAMENT SETTINGS
+ *------------------------------------*/
+
+// Filament change configuration
+#define FILAMENTCHANGEENABLE
+#ifdef FILAMENTCHANGEENABLE
+#define FILAMENTCHANGE_XPOS 211
+#define FILAMENTCHANGE_YPOS 0
+#define FILAMENTCHANGE_ZADD 2
+#define FILAMENTCHANGE_FIRSTRETRACT -2
+#define FILAMENTCHANGE_FINALRETRACT 0
+
+#define FILAMENTCHANGE_FIRSTFEED 70 //E distance in mm for fast filament loading sequence used used in filament change (M600)
+#define FILAMENTCHANGE_FINALFEED 25 //E distance in mm for slow filament loading sequence used used in filament change (M600) and filament load (M701) 
+#define FILAMENTCHANGE_RECFEED 5
+
+#define FILAMENTCHANGE_XYFEED 50
+#define FILAMENTCHANGE_EFEED_FIRST 20 // feedrate in mm/s for fast filament loading sequence used in filament change (M600)
+#define FILAMENTCHANGE_EFEED_FINAL 3.3f // feedrate in mm/s for slow filament loading sequence used in filament change (M600) and filament load (M701) 
+//#define FILAMENTCHANGE_RFEED 400
+#define FILAMENTCHANGE_RFEED 7000 / 60
+#define FILAMENTCHANGE_EXFEED 2
+#define FILAMENTCHANGE_ZFEED 15
+
+#endif
+
+/*------------------------------------
+ ADDITIONAL FEATURES SETTINGS
+ *------------------------------------*/
+
+// temperature runaway
+#define TEMP_RUNAWAY_BED_HYSTERESIS 5
+#define TEMP_RUNAWAY_BED_TIMEOUT 360
+
+#define TEMP_RUNAWAY_EXTRUDER_HYSTERESIS 15
+#define TEMP_RUNAWAY_EXTRUDER_TIMEOUT 45
+
+// model-based temperature check
+#define TEMP_MODEL 1              // enable model-based temperature checks
+#define TEMP_MODEL_DEBUG 1        // extended runtime logging
+
+#define TEMP_MODEL_CAL_C_low 5    // C estimation lower limit
+#define TEMP_MODEL_CAL_C_high 20  // C estimation upper limit
+#define TEMP_MODEL_CAL_C_thr 0.01 // C estimation iteration threshold
+#define TEMP_MODEL_CAL_C_itr 30   // C estimation iteration limit
+
+#define TEMP_MODEL_CAL_R_low 5    // R estimation lower limit
+#define TEMP_MODEL_CAL_R_high 50  // R estimation upper limit
+#define TEMP_MODEL_CAL_R_thr 0.01 // R estimation iteration threshold
+#define TEMP_MODEL_CAL_R_itr 30   // R estimation iteration limit
+
+#define TEMP_MODEL_CAL_T_low 50   // Default calibration cooling temperature (C)
+#define TEMP_MODEL_CAL_T_high 230 // Default calibration working temperature (C)
+
+#define TEMP_MODEL_Ta_corr -7     // Default ambient temperature correction
+
+#include "temp_model/e3d_REVO_HF_60W.h"
+#define TEMP_MODEL_DEFAULT E3D_REVO_HF_60W // Default E3D REVO HF 60W model parameters
+
+
+/*------------------------------------
+ MOTOR CURRENT SETTINGS
+ *------------------------------------*/
+
+// Motor Current settings for Einsy/tmc = 0..63
+#define MOTOR_CURRENT_PWM_RANGE 63
+
+/*------------------------------------
+ BED SETTINGS
+ *------------------------------------*/
+
+// Define Mesh Bed Leveling system to enable it
+#define MESH_BED_LEVELING
+#ifdef MESH_BED_LEVELING
+
+#define MBL_Z_STEP 0.01
+
+// Mesh definitions
+#define MESH_MIN_X 24
+#define MESH_MAX_X 228
+#define MESH_MIN_Y 6
+#define MESH_MAX_Y 210
+
+// Mesh upsample definition
+#define MESH_NUM_X_POINTS 7
+#define MESH_NUM_Y_POINTS 7
+// Mesh measure definition
+#define MESH_MEAS_NUM_X_POINTS 3
+#define MESH_MEAS_NUM_Y_POINTS 3
+
+// Maximum bed level correction value
+#define BED_ADJUSTMENT_UM_MAX 100
+
+#define MESH_HOME_Z_CALIB 0.2
+#define MESH_HOME_Z_SEARCH 5.0f           // Z lift for homing, mesh bed leveling etc.
+
+#define X_PROBE_OFFSET_FROM_EXTRUDER 23     // Z probe to nozzle X offset: -left  +right
+#define Y_PROBE_OFFSET_FROM_EXTRUDER 5     // Z probe to nozzle Y offset: -front +behind
+#define Z_PROBE_OFFSET_FROM_EXTRUDER -0.4  // Z probe to nozzle Z offset: -below (always!)
+#endif
+
+// Bed Temperature Control
+// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
+//
+// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder.
+// If your PID_dT above is the default, and correct for your hardware/configuration, that means 7.689Hz,
+// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating.
+// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater.
+// If your configuration is significantly different than this and you don't understand the issues involved, you probably
+// shouldn't use bed PID until someone else verifies your hardware works.
+// If this is enabled, find your own PID constants below.
+#define PIDTEMPBED
+//
+//#define BED_LIMIT_SWITCHING
+
+// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option.
+// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
+// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
+// so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
+#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
+
+// Bed temperature compensation settings
+#define BED_OFFSET 10
+#define BED_OFFSET_START 40
+#define BED_OFFSET_CENTER 50
+
+
+#ifdef PIDTEMPBED
+//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
+//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
+#if defined(E3D_PT100_BED_WITH_AMP) || defined(E3D_PT100_BED_NO_AMP)
+// Define PID constants for extruder with PT100
+#define  DEFAULT_bedKp 21.70
+#define  DEFAULT_bedKi 1.60
+#define  DEFAULT_bedKd 73.76
+#else
+#define  DEFAULT_bedKp 126.13
+#define  DEFAULT_bedKi 4.30
+#define  DEFAULT_bedKd 924.76
+#endif
+
+//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
+//from pidautotune
+//    #define  DEFAULT_bedKp 97.1
+//    #define  DEFAULT_bedKi 1.41
+//    #define  DEFAULT_bedKd 1675.16
+
+// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
+#endif // PIDTEMPBED
+
+/*-----------------------------------
+ PREHEAT SETTINGS
+ *------------------------------------*/
+
+#define PLA_PREHEAT_HOTEND_TEMP 215
+#define PLA_PREHEAT_HPB_TEMP 60
+
+#define PVB_PREHEAT_HOTEND_TEMP 215
+#define PVB_PREHEAT_HPB_TEMP 75
+
+#define ASA_PREHEAT_HOTEND_TEMP 260
+#define ASA_PREHEAT_HPB_TEMP 105
+
+#define PC_PREHEAT_HOTEND_TEMP 275
+#define PC_PREHEAT_HPB_TEMP 110
+
+#define PA_PREHEAT_HOTEND_TEMP 275
+#define PA_PREHEAT_HPB_TEMP 90
+
+#define ABS_PREHEAT_HOTEND_TEMP 255
+#define ABS_PREHEAT_HPB_TEMP 100
+
+#define HIPS_PREHEAT_HOTEND_TEMP 220
+#define HIPS_PREHEAT_HPB_TEMP 100
+
+#define PP_PREHEAT_HOTEND_TEMP 254
+#define PP_PREHEAT_HPB_TEMP 100
+
+#define PET_PREHEAT_HOTEND_TEMP 230
+#define PET_PREHEAT_HPB_TEMP 85
+
+#define FLEX_PREHEAT_HOTEND_TEMP 240
+#define FLEX_PREHEAT_HPB_TEMP 50
+
+/*------------------------------------
+ THERMISTORS SETTINGS
+ *------------------------------------*/
+
+//
+//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
+//
+//// Temperature sensor settings:
+// -2 is thermocouple with MAX6675 (only for sensor 0)
+// -1 is thermocouple with AD595
+// 0 is not used
+// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
+// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
+// 3 is Mendel-parts thermistor (4.7k pullup)
+// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
+// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
+// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
+// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
+// 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
+// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
+// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
+// 10 is 100k RS thermistor 198-961 (4.7k pullup)
+// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
+// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
+// 13 is 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+// 20 is the PT100 circuit found in the Ultimainboard V2.x
+// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+//
+//    1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
+//                          (but gives greater accuracy and more stable PID)
+// 51 is 100k thermistor - EPCOS (1k pullup)
+// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
+// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
+//
+// 1047 is Pt1000 with 4k7 pullup
+// 1010 is Pt1000 with 1k pullup (non standard)
+// 147 is Pt100 with 4k7 pullup
+// 148 is E3D Pt100 with 4k7 pullup and no PT100 Amplifier on a MiniRambo 1.3a
+// 247 is Pt100 with 4k7 pullup and PT100 Amplifier
+// 110 is Pt100 with 1k pullup (non standard)
+
+#if defined(E3D_PT100_EXTRUDER_WITH_AMP)
+#define TEMP_SENSOR_0 247
+#elif defined(E3D_PT100_EXTRUDER_NO_AMP)
+#define TEMP_SENSOR_0 148
+#else
+#define TEMP_SENSOR_0 5
+#endif
+#if defined(E3D_PT100_BED_WITH_AMP)
+#define TEMP_SENSOR_BED 247
+#elif defined(E3D_PT100_BED_NO_AMP)
+#define TEMP_SENSOR_BED 148
+#else
+#define TEMP_SENSOR_BED 1
+#endif
+#define TEMP_SENSOR_PINDA 1
+#define TEMP_SENSOR_AMBIENT 2000
+
+#define STACK_GUARD_TEST_VALUE 0xA2A2
+#define STACK_GUARD_MARGIN     32
+
+#define MAX_BED_TEMP_CALIBRATION 50
+#define MAX_HOTEND_TEMP_CALIBRATION 50
+
+#define MAX_E_STEPS_PER_UNIT 250
+#define MIN_E_STEPS_PER_UNIT 100
+
+#define Z_BABYSTEP_MIN -3999
+#define Z_BABYSTEP_MAX 0
+
+#define PINDA_PREHEAT_X 20
+#define PINDA_PREHEAT_Y 60
+#define PINDA_PREHEAT_Z 0.15
+/*
+#define PINDA_PREHEAT_X 70
+#define PINDA_PREHEAT_Y -3
+#define PINDA_PREHEAT_Z 1*/
+#define PINDA_HEAT_T 120 //time in s
+
+#define PINDA_MIN_T 50
+#define PINDA_STEP_T 10
+#define PINDA_MAX_T 100
+
+#define LONG_PRESS_TIME 1000 //time in ms for button long press
+#define BUTTON_BLANKING_TIME 200 //time in ms for blanking after button release
+
+#define DEFAULT_PID_TEMP 210
+
+#define MIN_PRINT_FAN_SPEED 75
+
+
+// How much shall the print head be lifted on power panic?
+// Ideally the Z axis will reach a zero phase of the stepper driver on power outage. To simplify this,
+// UVLO_Z_AXIS_SHIFT shall be an integer multiply of the stepper driver cycle, that is 4x full step.
+// For example, the Prusa i3 MK2 with 16 microsteps per full step has Z stepping of 400 microsteps per mm.
+// At 400 microsteps per mm, a full step lifts the Z axis by 0.04mm, and a stepper driver cycle is 0.16mm.
+// The following example, 12 * (4 * 16 / 400) = 12 * 0.16mm = 1.92mm.
+//#define UVLO_Z_AXIS_SHIFT 1.92
+#define UVLO_Z_AXIS_SHIFT 0.64
+// When powered off during PP recovery, the Z axis position can still be re-adjusted. In this case
+// we just need to shift to the nearest fullstep, but we need a move which is at least
+// "dropsegments" steps long. All the above rules still need to apply.
+#define UVLO_TINY_Z_AXIS_SHIFT 0.16
+// If power panic occured, and the current temperature is higher then target temperature before interrupt minus this offset, print will be recovered automatically.
+#define AUTOMATIC_UVLO_BED_TEMP_OFFSET 5 
+
+#define HEATBED_V2
+
+#define M600_TIMEOUT 600  //seconds
+
+//#define SUPPORT_VERBOSITY
+
+#define MMU_CONFIG_FILE "mmu2/variants/config_MMU2S.h"
+#define MMU_FILAMENT_COUNT 5
+//#define MMU_FORCE_STEALTH_MODE
+#define MMU_HWRESET
+#define MMU_DEBUG //print communication between MMU and printer on serial
+#define MMU_HAS_CUTTER
+
+// This is experimental feature requested by our test department.
+// There is no known use for ordinary user. If enabled by this macro
+// and enabled from printer menu (not enabled by default). It cuts filament
+// every time when switching filament from gcode. MMU_HAS_CUTTER needs to be
+// defined.
+
+//#define MMU_ALWAYS_CUT
+
+// MMU Error pause position
+#define MMU_ERR_X_PAUSE_POS 125
+#define MMU_ERR_Y_PAUSE_POS 0
+#define MMU_ERR_Z_PAUSE_LIFT 20
+
+// Default Arc Interpolation Settings (Now configurable via M214)
+#define DEFAULT_N_ARC_CORRECTION       25 // Number of interpolated segments between corrections.
+/* A value of 1 or less for N_ARC_CORRECTION will trigger the use of Sin and Cos for every arc, which will improve accuracy at the
+   cost of performance*/
+#define DEFAULT_MM_PER_ARC_SEGMENT     1.0f // REQUIRED - The enforced maximum length of an arc segment
+#define DEFAULT_MIN_MM_PER_ARC_SEGMENT 0.5f //the enforced minimum length of an interpolated segment
+   /*  MIN_MM_PER_ARC_SEGMENT Must be smaller than MM_PER_ARC_SEGMENT.  Only has an effect if MIN_ARC_SEGMENTS > 0
+       or ARC_SEGMENTS_PER_SEC > 0 .  If both MIN_ARC_SEGMENTS and ARC_SEGMENTS_PER_SEC is defined, the minimum
+       calculated segment length is used. */
+#define DEFAULT_MIN_ARC_SEGMENTS 20 // The enforced minimum segments in a full circle of the same radius.  Set to 0 to disable
+#define DEFAULT_ARC_SEGMENTS_PER_SEC 0 // Use feedrate to choose segment length. Set to 0 to disable
+
+#endif //__CONFIGURATION_PRUSA_H

Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h

@@ -11,8 +11,8 @@
 #define PRINTER_TYPE PRINTER_MK3S
 #define PRINTER_NAME PRINTER_MK3S_NAME
 #define PRINTER_NAME_ALTERNATE PRINTER_MK3_NAME //the other similar printer to this.
-#define PRINTER_MMU_TYPE PRINTER_MK3S_MMU2
-#define PRINTER_MMU_NAME PRINTER_MK3S_MMU2_NAME
+#define PRINTER_MMU_TYPE PRINTER_MK3S_MMU3
+#define PRINTER_MMU_NAME PRINTER_MK3S_MMU3_NAME
 #define FILAMENT_SIZE "1_75mm_MK3S"
 #define NOZZLE_TYPE "E3Dv6full"
 

lang/po/Firmware.pot

@@ -187,7 +187,7 @@ msgid "Brightness"
 msgstr ""
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:178 ../../Firmware/mmu2/errors_list.h:224
 msgid "COMMUNICATION ERROR"
 msgstr ""
 
@@ -237,13 +237,13 @@ msgid "Calibration done"
 msgstr ""
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:234 ../../Firmware/mmu2/errors_list.h:285
-#: ../../Firmware/mmu2/errors_list.h:287
+#: ../../Firmware/mmu2/errors_list.h:246 ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2/errors_list.h:303
 msgid "Can't move Selector or Idler."
 msgstr ""
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:260 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:328
 msgid ""
 "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
@@ -400,7 +400,7 @@ msgid "Dim"
 msgstr ""
 
 #. MSG_BTN_DISABLE_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:334 ../../Firmware/mmu2/errors_list.h:344
+#: ../../Firmware/mmu2/errors_list.h:351 ../../Firmware/mmu2/errors_list.h:361
 msgid "Disable"
 msgstr ""
 
@@ -433,7 +433,7 @@ msgid ""
 msgstr ""
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:330 ../../Firmware/mmu2/errors_list.h:340
+#: ../../Firmware/mmu2/errors_list.h:347 ../../Firmware/mmu2/errors_list.h:357
 msgid "Done"
 msgstr ""
 
@@ -534,40 +534,40 @@ msgstr ""
 msgid "F. runout"
 msgstr ""
 
-#. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:169 ../../Firmware/mmu2/errors_list.h:214
-msgid "FILAMENT ALREADY LOA"
+#. MSG_TITLE_FILAMENT_ALREADY_LOADED c=20
+#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:225
+msgid "FIL. ALREADY LOADED"
 msgstr ""
 
 #. MSG_TITLE_FILAMENT_EJECTED c=20
-#: ../../Firmware/mmu2/errors_list.h:175 ../../Firmware/mmu2/errors_list.h:220
+#: ../../Firmware/mmu2/errors_list.h:185 ../../Firmware/mmu2/errors_list.h:231
 msgid "FILAMENT EJECTED"
 msgstr ""
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:135 ../../Firmware/mmu2/errors_list.h:178
+#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:189
 msgid "FINDA DIDNT TRIGGER"
 msgstr ""
 
-#. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:277
+#. MSG_TITLE_FINDA_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:190
+msgid "FINDA FILAM. STUCK"
+msgstr ""
+
+#. MSG_DESC_FINDA_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:293
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
 msgstr ""
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:225 ../../Firmware/mmu2/errors_list.h:276
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:292
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
 msgstr ""
 
-#. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:179
-msgid "FINDA: FILAM. STUCK"
-msgstr ""
-
 #. MSG_FS_ACTION c=10
 #: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:4048
 #: ../../Firmware/ultralcd.cpp:4051
@@ -575,22 +575,22 @@ msgid "FS Action"
 msgstr ""
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:191
 msgid "FSENSOR DIDNT TRIGG."
 msgstr ""
 
+#. MSG_TITLE_FSENSOR_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:192
+msgid "FSENSOR FIL. STUCK"
+msgstr ""
+
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:194
 msgid "FSENSOR TOO EARLY"
 msgstr ""
 
-#. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:181
-msgid "FSENSOR: FIL. STUCK"
-msgstr ""
-
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:218
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:229
 msgid "FW RUNTIME ERROR"
 msgstr ""
 
@@ -672,7 +672,7 @@ msgid "Filament"
 msgstr ""
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:264 ../../Firmware/mmu2/errors_list.h:317
+#: ../../Firmware/mmu2/errors_list.h:279 ../../Firmware/mmu2/errors_list.h:333
 msgid ""
 "Filament detected unexpectedly. Ensure no filament is loaded. Check the "
 "sensors and wiring."
@@ -696,22 +696,22 @@ msgstr ""
 msgid "Filament sensor"
 msgstr ""
 
-#. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:279
+#. MSG_DESC_FSENSOR_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:295
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
 msgstr ""
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:278
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:294
 msgid ""
-"Filament sensor didn't trigger while loading the filament. Ensure the "
-"filament reached the fsensor and the sensor works."
+"Filament sensor didn't trigger while loading the filament. Ensure the sensor"
+" is calibrated and the filament reached it."
 msgstr ""
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:281
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:297
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -829,7 +829,7 @@ msgid "Heating"
 msgstr ""
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9272
+#: ../../Firmware/Marlin_main.cpp:9274
 msgid "Heating disabled by safety timer."
 msgstr ""
 
@@ -888,22 +888,22 @@ msgid "I will run z calibration now."
 msgstr ""
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:199
 msgid "IDLER CANNOT HOME"
 msgstr ""
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:200
 msgid "IDLER CANNOT MOVE"
 msgstr ""
 
 #. MSG_TITLE_INSPECT_FINDA c=20
-#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:195
 msgid "INSPECT FINDA"
 msgstr ""
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:215
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:226
 msgid "INVALID TOOL"
 msgstr ""
 
@@ -942,7 +942,7 @@ msgid ""
 msgstr ""
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:278 ../../Firmware/mmu2/errors_list.h:332
 msgid ""
 "Internal runtime error. Try resetting the MMU or updating the firmware."
 msgstr ""
@@ -965,7 +965,7 @@ msgid "Iteration"
 msgstr ""
 
 #. MSG_TITLE_LOAD_TO_EXTRUDER_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:196
 msgid "LOAD TO EXTR. FAILED"
 msgstr ""
 
@@ -1055,7 +1055,7 @@ msgid "Loading filament"
 msgstr ""
 
 #. MSG_DESC_LOAD_TO_EXTRUDER_FAILED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:283
+#: ../../Firmware/mmu2/errors_list.h:244 ../../Firmware/mmu2/errors_list.h:299
 msgid ""
 "Loading to extruder failed. Inspect the filament tip shape. Refine the "
 "sensor calibration, if needed."
@@ -1072,28 +1072,34 @@ msgstr ""
 msgid "Loud"
 msgstr ""
 
-#. MSG_TITLE_MCU_UNDERVOLTAGE_VCC c=20
-#: ../../Firmware/mmu2/errors_list.h:166 ../../Firmware/mmu2/errors_list.h:211
-msgid "MCU UNDERVOLTAGE VCC"
-msgstr ""
-
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:217
+#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:228
 msgid "MMU FW UPDATE NEEDED"
 msgstr ""
 
+#. MSG_DESC_FW_UPDATE_NEEDED c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:331
+msgid ""
+"MMU FW version is incompatible with printer FW.Update to version 3.0.0."
+msgstr ""
+
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:262 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:277 ../../Firmware/mmu2/errors_list.h:330
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr ""
 
+#. MSG_TITLE_MCU_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:222
+msgid "MMU MCU ERROR"
+msgstr ""
+
 #. MSG_MMU_MODE c=8
 #: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4085
 msgid "MMU Mode"
 msgstr ""
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:212
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:223
 msgid "MMU NOT RESPONDING"
 msgstr ""
 
@@ -1103,8 +1109,8 @@ msgid "MMU Retry: Restoring temperature..."
 msgstr ""
 
 #. MSG_TITLE_SELFTEST_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:165 ../../Firmware/mmu2/errors_list.h:208
-#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:220 ../../Firmware/mmu2/errors_list.h:221
 msgid "MMU SELFTEST FAILED"
 msgstr ""
 
@@ -1126,12 +1132,12 @@ msgid "MMU load fails"
 msgstr ""
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:311
+#: ../../Firmware/mmu2/errors_list.h:274 ../../Firmware/mmu2/errors_list.h:327
 msgid "MMU not responding correctly. Check the wiring and connectors."
 msgstr ""
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:258 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:326
 msgid "MMU not responding. Check the wiring and connectors."
 msgstr ""
 
@@ -1205,18 +1211,18 @@ msgid "Model"
 msgstr ""
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:288
-#: ../../Firmware/mmu2/errors_list.h:289 ../../Firmware/mmu2/errors_list.h:290
-#: ../../Firmware/mmu2/errors_list.h:291 ../../Firmware/mmu2/errors_list.h:292
-#: ../../Firmware/mmu2/errors_list.h:293 ../../Firmware/mmu2/errors_list.h:294
-#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:296
-#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:298
-#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:300
-#: ../../Firmware/mmu2/errors_list.h:301 ../../Firmware/mmu2/errors_list.h:302
-#: ../../Firmware/mmu2/errors_list.h:303 ../../Firmware/mmu2/errors_list.h:304
+#: ../../Firmware/mmu2/errors_list.h:250 ../../Firmware/mmu2/errors_list.h:304
 #: ../../Firmware/mmu2/errors_list.h:305 ../../Firmware/mmu2/errors_list.h:306
 #: ../../Firmware/mmu2/errors_list.h:307 ../../Firmware/mmu2/errors_list.h:308
-#: ../../Firmware/mmu2/errors_list.h:309
+#: ../../Firmware/mmu2/errors_list.h:309 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:311 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:313 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:315 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:317 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:319 ../../Firmware/mmu2/errors_list.h:320
+#: ../../Firmware/mmu2/errors_list.h:321 ../../Firmware/mmu2/errors_list.h:322
+#: ../../Firmware/mmu2/errors_list.h:323 ../../Firmware/mmu2/errors_list.h:324
+#: ../../Firmware/mmu2/errors_list.h:325
 msgid "More details online."
 msgstr ""
 
@@ -1398,7 +1404,7 @@ msgid "Once"
 msgstr ""
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9451 ../../Firmware/messages.cpp:175
+#: ../../Firmware/Marlin_main.cpp:9453 ../../Firmware/messages.cpp:175
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
@@ -1443,7 +1449,7 @@ msgid ""
 msgstr ""
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:193
 msgid "PULLEY CANNOT MOVE"
 msgstr ""
 
@@ -1534,7 +1540,7 @@ msgid "Please place steel sheet on heatbed."
 msgstr ""
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11208 ../../Firmware/Marlin_main.cpp:11238
+#: ../../Firmware/Marlin_main.cpp:11210 ../../Firmware/Marlin_main.cpp:11240
 #: ../../Firmware/messages.cpp:79
 msgid "Please press the knob to unload filament"
 msgstr ""
@@ -1636,7 +1642,7 @@ msgid "Press the knob"
 msgstr ""
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11220
+#: ../../Firmware/Marlin_main.cpp:11222
 msgid "Press the knob to preheat nozzle and continue."
 msgstr ""
 
@@ -1678,8 +1684,8 @@ msgid ""
 " steps, section Calibration flow."
 msgstr ""
 
-#. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:280
+#. MSG_DESC_PULLEY_CANNOT_MOVE c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:296
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 
@@ -1690,7 +1696,7 @@ msgid "Pushing filament"
 msgstr ""
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:171 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:181 ../../Firmware/mmu2/errors_list.h:227
 msgid "QUEUE FULL"
 msgstr ""
 
@@ -1705,7 +1711,7 @@ msgid "Rear side [µm]"
 msgstr ""
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10598
+#: ../../Firmware/Marlin_main.cpp:10600
 msgid "Recovering print"
 msgstr ""
 
@@ -1715,7 +1721,7 @@ msgid "Remove old filament and press the knob to start loading new filament."
 msgstr ""
 
 #. MSG_DESC_FILAMENT_EJECTED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:280 ../../Firmware/mmu2/errors_list.h:334
 msgid "Remove the ejected filament from the front of the MMU."
 msgstr ""
 
@@ -1725,7 +1731,7 @@ msgid "Rename"
 msgstr ""
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:313
+#: ../../Firmware/mmu2/errors_list.h:276 ../../Firmware/mmu2/errors_list.h:329
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1742,6 +1748,11 @@ msgstr ""
 msgid "Reset XYZ calibr."
 msgstr ""
 
+#. MSG_BTN_RESET_MMU c=8
+#: ../../Firmware/mmu2/errors_list.h:348 ../../Firmware/mmu2/errors_list.h:358
+msgid "ResetMMU"
+msgstr ""
+
 #. MSG_RESUME_PRINT c=18
 #: ../../Firmware/Marlin_main.cpp:623 ../../Firmware/messages.cpp:86
 #: ../../Firmware/ultralcd.cpp:5185 ../../Firmware/ultralcd.cpp:5187
@@ -1760,7 +1771,7 @@ msgid "Retract from FINDA"
 msgstr ""
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:329 ../../Firmware/mmu2/errors_list.h:339
+#: ../../Firmware/mmu2/errors_list.h:346 ../../Firmware/mmu2/errors_list.h:356
 msgid "Retry"
 msgstr ""
 
@@ -1780,11 +1791,6 @@ msgstr ""
 msgid "Right side[µm]"
 msgstr ""
 
-#. MSG_BTN_RESTART_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:331 ../../Firmware/mmu2/errors_list.h:341
-msgid "RstMMU"
-msgstr ""
-
 #. MSG_WIZARD_RERUN c=20 r=7
 #: ../../Firmware/ultralcd.cpp:3644
 msgid ""
@@ -1799,17 +1805,17 @@ msgid "SD card"
 msgstr ""
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:197
 msgid "SELECTOR CANNOT HOME"
 msgstr ""
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:198
 msgid "SELECTOR CANNOT MOVE"
 msgstr ""
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9477 ../../Firmware/messages.cpp:114
+#: ../../Firmware/Marlin_main.cpp:9479 ../../Firmware/messages.cpp:114
 msgid "STOPPED."
 msgstr ""
 
@@ -1861,10 +1867,10 @@ msgid "Selecting fil. slot"
 msgstr ""
 
 #. MSG_DESC_INSPECT_FINDA c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:282
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:298
 msgid ""
 "Selector can't move due to FINDA detecting a filament. Make sure no filament"
-" is in selector and FINDA works properly."
+" is in Selector and FINDA works properly."
 msgstr ""
 
 #. MSG_SELFTEST_OK c=20
@@ -2021,7 +2027,7 @@ msgid "Steel sheets"
 msgstr ""
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:333 ../../Firmware/mmu2/errors_list.h:343
+#: ../../Firmware/mmu2/errors_list.h:350 ../../Firmware/mmu2/errors_list.h:360
 msgid "Stop"
 msgstr ""
 
@@ -2048,37 +2054,37 @@ msgid "Swapped"
 msgstr ""
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2233
+#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2236
 msgid "THERMAL ANOMALY"
 msgstr ""
 
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:196
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:198
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:209
 msgid "TMC DRIVER ERROR"
 msgstr ""
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:199
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:212
 msgid "TMC DRIVER RESET"
 msgstr ""
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:162 ../../Firmware/mmu2/errors_list.h:205
-#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:218
 msgid "TMC DRIVER SHORTED"
 msgstr ""
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:193
-#: ../../Firmware/mmu2/errors_list.h:194 ../../Firmware/mmu2/errors_list.h:195
+#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:206
 msgid "TMC OVERHEAT ERROR"
 msgstr ""
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:202
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:164 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:214 ../../Firmware/mmu2/errors_list.h:215
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr ""
 
@@ -2098,20 +2104,13 @@ msgid "Testing filament"
 msgstr ""
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:286
+#: ../../Firmware/mmu2/errors_list.h:248 ../../Firmware/mmu2/errors_list.h:302
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
 
-#. MSG_DESC_FW_UPDATE_NEEDED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:268 ../../Firmware/mmu2/errors_list.h:315
-msgid ""
-"The MMU firmware version incompatible with the printer's FW. Update to "
-"version 2.1.9."
-msgstr ""
-
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:284
+#: ../../Firmware/mmu2/errors_list.h:245 ../../Firmware/mmu2/errors_list.h:300
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2180,13 +2179,23 @@ msgstr ""
 msgid "Tune"
 msgstr ""
 
+#. MSG_TITLE_UNKNOWN_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:232
+msgid "UNKNOWN ERROR"
+msgstr ""
+
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:184 ../../Firmware/mmu2/errors_list.h:230
 msgid "UNLOAD MANUALLY"
 msgstr ""
 
+#. MSG_DESC_UNKNOWN_ERROR c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:335
+msgid "Unexpected error occurred."
+msgstr ""
+
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:332 ../../Firmware/mmu2/errors_list.h:342
+#: ../../Firmware/mmu2/errors_list.h:349 ../../Firmware/mmu2/errors_list.h:359
 msgid "Unload"
 msgstr ""
 
@@ -2226,8 +2235,8 @@ msgid "Voltages"
 msgstr ""
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:190
-#: ../../Firmware/mmu2/errors_list.h:191 ../../Firmware/mmu2/errors_list.h:192
+#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:203
 msgid "WARNING TMC TOO HOT"
 msgstr ""
 

lang/po/Firmware_cs.po

@@ -199,7 +199,7 @@ msgid "Brightness"
 msgstr "Podsviceni"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:178 ../../Firmware/mmu2/errors_list.h:224
 msgid "COMMUNICATION ERROR"
 msgstr "CHYBA KOMUNIKACE"
 
@@ -253,13 +253,13 @@ msgid "Calibration done"
 msgstr "Kalibrace OK"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:234 ../../Firmware/mmu2/errors_list.h:285
-#: ../../Firmware/mmu2/errors_list.h:287
+#: ../../Firmware/mmu2/errors_list.h:246 ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2/errors_list.h:303
 msgid "Can't move Selector or Idler."
 msgstr "Chyba pohybu selektoru nebo idleru"
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:260 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:328
 msgid ""
 "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr "Nelze provest akci, filament je zaveden. Nejprve jej vyjmete."
@@ -419,7 +419,7 @@ msgid "Dim"
 msgstr "Temny"
 
 #. MSG_BTN_DISABLE_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:334 ../../Firmware/mmu2/errors_list.h:344
+#: ../../Firmware/mmu2/errors_list.h:351 ../../Firmware/mmu2/errors_list.h:361
 msgid "Disable"
 msgstr "Vypnout"
 
@@ -456,7 +456,7 @@ msgstr ""
 "podlozkou?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:330 ../../Firmware/mmu2/errors_list.h:340
+#: ../../Firmware/mmu2/errors_list.h:347 ../../Firmware/mmu2/errors_list.h:357
 msgid "Done"
 msgstr "Konec"
 
@@ -551,18 +551,18 @@ msgstr "Det. zaseku"
 msgid "F. runout"
 msgstr "F. runout"
 
-#. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:169 ../../Firmware/mmu2/errors_list.h:214
-msgid "FILAMENT ALREADY LOA"
+#. MSG_TITLE_FILAMENT_ALREADY_LOADED c=20
+#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:225
+msgid "FIL. ALREADY LOADED"
 msgstr "FILAMENT JE ZAVEDEN"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:135 ../../Firmware/mmu2/errors_list.h:178
+#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:189
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA NESEPNULA"
 
-#. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:277
+#. MSG_DESC_FINDA_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:293
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -571,7 +571,7 @@ msgstr ""
 " ze se filament nezasekl a FINDA funguje."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:225 ../../Firmware/mmu2/errors_list.h:276
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:292
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -579,10 +579,10 @@ msgstr ""
 "FINDA se nesepnula pri zavadeni filamentu. Neni pohyb filamentu blokovan? Je"
 " senzor ok?"
 
-#. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:179
-msgid "FINDA: FILAM. STUCK"
-msgstr "FINDA: ZASEK. FILAM."
+#. MSG_TITLE_FINDA_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:190
+msgid "FINDA FILAM. STUCK"
+msgstr "FINDA ZASEK. FILAM."
 
 #. MSG_FS_ACTION c=10
 #: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:4048
@@ -591,22 +591,22 @@ msgid "FS Action"
 msgstr "FS reakce"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:191
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "F. SENZOR NESEPNUL"
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:194
 msgid "FSENSOR TOO EARLY"
 msgstr "F.SENZOR MOC BRZY"
 
-#. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:181
-msgid "FSENSOR: FIL. STUCK"
+#. MSG_TITLE_FSENSOR_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:192
+msgid "FSENSOR FIL. STUCK"
 msgstr "FSENZOR ZASEK FILAM."
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:218
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:229
 msgid "FW RUNTIME ERROR"
 msgstr "FW RUNTIME CHYBA"
 
@@ -705,8 +705,8 @@ msgstr "Filament nezaveden"
 msgid "Filament sensor"
 msgstr "Senzor filamentu"
 
-#. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:279
+#. MSG_DESC_FSENSOR_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:295
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -715,16 +715,16 @@ msgstr ""
 "filament muze pohybovat a senzor funguje."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:278
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:294
 msgid ""
-"Filament sensor didn't trigger while loading the filament. Ensure the "
-"filament reached the fsensor and the sensor works."
+"Filament sensor didn't trigger while loading the filament. Ensure the sensor"
+" is calibrated and the filament reached it."
 msgstr ""
 "Senzor filamentu nesepnul pri zavadeni filamentu. Ujistete se, ze se k nemu "
 "filament dostal a ze senzor funguje."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:281
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:297
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -851,7 +851,7 @@ msgid "Heating"
 msgstr "Zahrivani"
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9272
+#: ../../Firmware/Marlin_main.cpp:9274
 msgid "Heating disabled by safety timer."
 msgstr "Zahrivani preruseno bezpecnostnim casovacem."
 
@@ -914,22 +914,22 @@ msgid "I will run z calibration now."
 msgstr "Nyni provedu z kalibraci."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:199
 msgid "IDLER CANNOT HOME"
 msgstr "IDLER: CHYBA HOMINGU"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:200
 msgid "IDLER CANNOT MOVE"
 msgstr "CHYBA POHYBU IDLERU"
 
 #. MSG_TITLE_INSPECT_FINDA c=20
-#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:195
 msgid "INSPECT FINDA"
 msgstr "KONTROLA FINDA"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:215
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:226
 msgid "INVALID TOOL"
 msgstr "NEPLATNY NASTROJ"
 
@@ -970,7 +970,7 @@ msgid ""
 msgstr "Vlozte filament (nezavadejte) do extruderu a stisknete tlacitko"
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:278 ../../Firmware/mmu2/errors_list.h:332
 msgid ""
 "Internal runtime error. Try resetting the MMU or updating the firmware."
 msgstr "Interní chyba. Zkuste resetovat MMU ci aktualizujte FW."
@@ -1089,12 +1089,12 @@ msgid "Loud"
 msgstr "Hlasity"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:217
+#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:228
 msgid "MMU FW UPDATE NEEDED"
 msgstr "AKTUALIZUJTE MMU FW"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:262 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:277 ../../Firmware/mmu2/errors_list.h:330
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "Interni chyba MMU FW, resetujte MMU"
 
@@ -1104,7 +1104,7 @@ msgid "MMU Mode"
 msgstr "MMU mod"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:212
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:223
 msgid "MMU NOT RESPONDING"
 msgstr "MMU NEODPOVIDA"
 
@@ -1114,10 +1114,10 @@ msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU opakovani: Obnova teploty..."
 
 #. MSG_TITLE_SELFTEST_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:165 ../../Firmware/mmu2/errors_list.h:208
-#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:220 ../../Firmware/mmu2/errors_list.h:221
 msgid "MMU SELFTEST FAILED"
-msgstr "MMU SELFTEST SELAHL"
+msgstr "MMU SELFTEST SELHAL"
 
 #. MSG_MMU_FAILS c=15
 #: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1118
@@ -1132,12 +1132,12 @@ msgid "MMU load fails"
 msgstr "MMU selhani zav"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:311
+#: ../../Firmware/mmu2/errors_list.h:274 ../../Firmware/mmu2/errors_list.h:327
 msgid "MMU not responding correctly. Check the wiring and connectors."
 msgstr "MMU neodpovida spravne. Zkontrolujte zapojeni kabelu."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:258 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:326
 msgid "MMU not responding. Check the wiring and connectors."
 msgstr "MMU neodpovida. Zkontrolujte kabely a jejich zapojeni."
 
@@ -1205,18 +1205,18 @@ msgid "Model"
 msgstr "Model"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:288
-#: ../../Firmware/mmu2/errors_list.h:289 ../../Firmware/mmu2/errors_list.h:290
-#: ../../Firmware/mmu2/errors_list.h:291 ../../Firmware/mmu2/errors_list.h:292
-#: ../../Firmware/mmu2/errors_list.h:293 ../../Firmware/mmu2/errors_list.h:294
-#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:296
-#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:298
-#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:300
-#: ../../Firmware/mmu2/errors_list.h:301 ../../Firmware/mmu2/errors_list.h:302
-#: ../../Firmware/mmu2/errors_list.h:303 ../../Firmware/mmu2/errors_list.h:304
+#: ../../Firmware/mmu2/errors_list.h:250 ../../Firmware/mmu2/errors_list.h:304
 #: ../../Firmware/mmu2/errors_list.h:305 ../../Firmware/mmu2/errors_list.h:306
 #: ../../Firmware/mmu2/errors_list.h:307 ../../Firmware/mmu2/errors_list.h:308
-#: ../../Firmware/mmu2/errors_list.h:309
+#: ../../Firmware/mmu2/errors_list.h:309 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:311 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:313 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:315 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:317 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:319 ../../Firmware/mmu2/errors_list.h:320
+#: ../../Firmware/mmu2/errors_list.h:321 ../../Firmware/mmu2/errors_list.h:322
+#: ../../Firmware/mmu2/errors_list.h:323 ../../Firmware/mmu2/errors_list.h:324
+#: ../../Firmware/mmu2/errors_list.h:325
 msgid "More details online."
 msgstr "Vice info na webu"
 
@@ -1386,7 +1386,7 @@ msgid "Once"
 msgstr "Jednou"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9451 ../../Firmware/messages.cpp:175
+#: ../../Firmware/Marlin_main.cpp:9453 ../../Firmware/messages.cpp:175
 msgid "PAUSED THERMAL ERROR"
 msgstr "STOP: CHYBA TEPLOTY"
 
@@ -1433,7 +1433,7 @@ msgstr ""
 "menu Nastaveni->Tepl. kal."
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:193
 msgid "PULLEY CANNOT MOVE"
 msgstr "KLADKA SE NEOTACI"
 
@@ -1529,7 +1529,7 @@ msgid "Please place steel sheet on heatbed."
 msgstr "Umistete tiskovy plat na podlozku"
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11208 ../../Firmware/Marlin_main.cpp:11238
+#: ../../Firmware/Marlin_main.cpp:11210 ../../Firmware/Marlin_main.cpp:11240
 #: ../../Firmware/messages.cpp:79
 msgid "Please press the knob to unload filament"
 msgstr "Pro vysunuti filamentu stisknete tlacitko"
@@ -1626,7 +1626,7 @@ msgid "Press the knob"
 msgstr "Stisknete tlacitko"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11220
+#: ../../Firmware/Marlin_main.cpp:11222
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Pro nahrati trysky a pokracovani stisknete tlacitko."
 
@@ -1684,8 +1684,8 @@ msgstr ""
 "Prumer trysky tiskarny se lisi od G-code. Zkontrolujte nastaveni. Tisk "
 "zrusen."
 
-#. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:280
+#. MSG_DESC_PULLEY_CANNOT_MOVE c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:296
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 "Kladkový motor se zastavil. Ujistete se, ze neni pohyb blokovan a "
@@ -1698,7 +1698,7 @@ msgid "Pushing filament"
 msgstr "Posun filamentu"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:171 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:181 ../../Firmware/mmu2/errors_list.h:227
 msgid "QUEUE FULL"
 msgstr "FRONTA PLNA"
 
@@ -1713,7 +1713,7 @@ msgid "Rear side [µm]"
 msgstr "Vzadu [µm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10598
+#: ../../Firmware/Marlin_main.cpp:10600
 msgid "Recovering print"
 msgstr "Obnovovani tisku"
 
@@ -1728,7 +1728,7 @@ msgid "Rename"
 msgstr "Prejmenovat"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:313
+#: ../../Firmware/mmu2/errors_list.h:276 ../../Firmware/mmu2/errors_list.h:329
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1765,7 +1765,7 @@ msgid "Retract from FINDA"
 msgstr "Vysouvani od FINDy"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:329 ../../Firmware/mmu2/errors_list.h:339
+#: ../../Firmware/mmu2/errors_list.h:346 ../../Firmware/mmu2/errors_list.h:356
 msgid "Retry"
 msgstr "Znovu"
 
@@ -1801,17 +1801,17 @@ msgid "SD card"
 msgstr "SD karta"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:197
 msgid "SELECTOR CANNOT HOME"
 msgstr "SELEKTOR: HOMING ERR"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:198
 msgid "SELECTOR CANNOT MOVE"
 msgstr "SELEKTOR SE NEHYBE"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9477 ../../Firmware/messages.cpp:114
+#: ../../Firmware/Marlin_main.cpp:9479 ../../Firmware/messages.cpp:114
 msgid "STOPPED."
 msgstr "ZASTAVENO."
 
@@ -2022,7 +2022,7 @@ msgid "Steel sheets"
 msgstr "Tiskove platy"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:333 ../../Firmware/mmu2/errors_list.h:343
+#: ../../Firmware/mmu2/errors_list.h:350 ../../Firmware/mmu2/errors_list.h:360
 msgid "Stop"
 msgstr "Stop"
 
@@ -2049,37 +2049,37 @@ msgid "Swapped"
 msgstr "Prohozene"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2233
+#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2236
 msgid "THERMAL ANOMALY"
 msgstr "TEPLOTNI VYJIMKA"
 
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:196
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:198
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:209
 msgid "TMC DRIVER ERROR"
 msgstr "CHYBA TMC DRIVER"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:199
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:212
 msgid "TMC DRIVER RESET"
 msgstr "TMC RESET DRIVERU"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:162 ../../Firmware/mmu2/errors_list.h:205
-#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:218
 msgid "TMC DRIVER SHORTED"
 msgstr "TMC DRIVER: ZKRAT"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:193
-#: ../../Firmware/mmu2/errors_list.h:194 ../../Firmware/mmu2/errors_list.h:195
+#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:206
 msgid "TMC OVERHEAT ERROR"
 msgstr "TMC CHYBA: PREHRATI"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:202
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:164 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:214 ../../Firmware/mmu2/errors_list.h:215
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "TMC CHYBA NIZKE NAP."
 
@@ -2113,7 +2113,7 @@ msgid "Testing filament"
 msgstr "Testovani filamentu"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:286
+#: ../../Firmware/mmu2/errors_list.h:248 ../../Firmware/mmu2/errors_list.h:302
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2121,7 +2121,7 @@ msgstr ""
 "pohyb."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:284
+#: ../../Firmware/mmu2/errors_list.h:245 ../../Firmware/mmu2/errors_list.h:300
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2184,12 +2184,12 @@ msgid "Tune"
 msgstr "Ladit"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:184 ../../Firmware/mmu2/errors_list.h:230
 msgid "UNLOAD MANUALLY"
 msgstr "MANUALNI VYJMUTI"
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:332 ../../Firmware/mmu2/errors_list.h:342
+#: ../../Firmware/mmu2/errors_list.h:349 ../../Firmware/mmu2/errors_list.h:359
 msgid "Unload"
 msgstr "Vyjmout"
 
@@ -2229,8 +2229,8 @@ msgid "Voltages"
 msgstr "Napeti"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:190
-#: ../../Firmware/mmu2/errors_list.h:191 ../../Firmware/mmu2/errors_list.h:192
+#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:203
 msgid "WARNING TMC TOO HOT"
 msgstr "TMC: VYSOKA TEPLOTA!"
 
@@ -2441,12 +2441,12 @@ msgid "Eject from MMU"
 msgstr "Vysunutí z MMU"
 
 #. MSG_TITLE_FILAMENT_EJECTED c=20
-#: ../../Firmware/mmu2/errors_list.h:175 ../../Firmware/mmu2/errors_list.h:220
+#: ../../Firmware/mmu2/errors_list.h:185 ../../Firmware/mmu2/errors_list.h:231
 msgid "FILAMENT EJECTED"
 msgstr "FILAMENT VLÁKNO"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:264 ../../Firmware/mmu2/errors_list.h:317
+#: ../../Firmware/mmu2/errors_list.h:279 ../../Firmware/mmu2/errors_list.h:333
 msgid ""
 "Filament detected unexpectedly. Ensure no filament is loaded. Check the "
 "sensors and wiring."
@@ -2455,12 +2455,12 @@ msgstr ""
 " Zkontrolujte snímače a kabeláž."
 
 #. MSG_TITLE_LOAD_TO_EXTRUDER_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:196
 msgid "LOAD TO EXTR. FAILED"
 msgstr "NAČÍST DO EXTR. SEL."
 
 #. MSG_DESC_LOAD_TO_EXTRUDER_FAILED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:283
+#: ../../Firmware/mmu2/errors_list.h:244 ../../Firmware/mmu2/errors_list.h:299
 msgid ""
 "Loading to extruder failed. Inspect the filament tip shape. Refine the "
 "sensor calibration, if needed."
@@ -2468,10 +2468,10 @@ msgstr ""
 "Načítání do extrudéru se nezdařilo. Zkontrolujte tvar špičky vlákna. V "
 "případě potřeby upřesněte kalibraci snímače."
 
-#. MSG_TITLE_MCU_UNDERVOLTAGE_VCC c=20
-#: ../../Firmware/mmu2/errors_list.h:166 ../../Firmware/mmu2/errors_list.h:211
-msgid "MCU UNDERVOLTAGE VCC"
-msgstr "MCU PODPĚTÍ VCC"
+#. MSG_TITLE_MCU_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:222
+msgid "MMU MCU ERROR"
+msgstr "MMU MCU CHYBA"
 
 #. MSG_MATERIAL_CHANGES c=18
 #: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:1095
@@ -2480,32 +2480,31 @@ msgid "Material changes"
 msgstr "Výměn materiálů"
 
 #. MSG_DESC_FILAMENT_EJECTED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:280 ../../Firmware/mmu2/errors_list.h:334
 msgid "Remove the ejected filament from the front of the MMU."
 msgstr "Odstraňte vysunuté filament z přední části MMU."
 
-#. MSG_BTN_RESTART_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:331 ../../Firmware/mmu2/errors_list.h:341
-msgid "RstMMU"
-msgstr "RstMMU"
+#. MSG_BTN_RESET_MMU c=8
+#: ../../Firmware/mmu2/errors_list.h:348 ../../Firmware/mmu2/errors_list.h:358
+msgid "ResetMMU"
+msgstr "ResetMMU"
 
 #. MSG_DESC_INSPECT_FINDA c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:282
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:298
 msgid ""
 "Selector can't move due to FINDA detecting a filament. Make sure no filament"
-" is in selector and FINDA works properly."
+" is in Selector and FINDA works properly."
 msgstr ""
 "Selektor se nemůže pohybovat, protože FINDA detekuje vlákno. Ujistěte se, že"
 " ve voliči není žádné vlákno a FINDA funguje správně."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:268 ../../Firmware/mmu2/errors_list.h:315
+#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:331
 msgid ""
-"The MMU firmware version incompatible with the printer's FW. Update to "
-"version 2.1.9."
+"MMU FW version is incompatible with printer FW.Update to version 3.0.0."
 msgstr ""
 "Verze firmwaru MMU není kompatibilní s FW tiskárny. Aktualizujte na verzi "
-"2.1.9."
+"3.0.0."
 
 #. MSG_PRELOAD_TO_MMU c=17
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5231
@@ -2520,6 +2519,16 @@ msgstr "MK3 firmware detekovan na MK3S tiskarne"
 msgid "MK3S firmware detected on MK3 printer"
 msgstr "MK3S firmware detekovan na tiskarne MK3"
 
+#. MSG_TITLE_UNKNOWN_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:232
+msgid "UNKNOWN ERROR"
+msgstr "NEZNÁMÁ CHYBA"
+
+#. MSG_DESC_UNKNOWN_ERROR c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:335
+msgid "Unexpected error occurred."
+msgstr "Došlo k neočekávané chybě."
+
 #~ msgid "XFLASH init"
 #~ msgstr "XFLASH init"
 

lang/po/Firmware_de.po

@@ -200,7 +200,7 @@ msgid "Brightness"
 msgstr "Helligkeit"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:178 ../../Firmware/mmu2/errors_list.h:224
 msgid "COMMUNICATION ERROR"
 msgstr "KOMMUNIKATIONSFEHLER"
 
@@ -254,13 +254,13 @@ msgid "Calibration done"
 msgstr "Kalibrierung OK"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:234 ../../Firmware/mmu2/errors_list.h:285
-#: ../../Firmware/mmu2/errors_list.h:287
+#: ../../Firmware/mmu2/errors_list.h:246 ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2/errors_list.h:303
 msgid "Can't move Selector or Idler."
 msgstr "Kann Selektor oder Riemenscheibe nicht bewegen."
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:260 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:328
 msgid ""
 "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
@@ -422,7 +422,7 @@ msgid "Dim"
 msgstr "Dimm"
 
 #. MSG_BTN_DISABLE_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:334 ../../Firmware/mmu2/errors_list.h:344
+#: ../../Firmware/mmu2/errors_list.h:351 ../../Firmware/mmu2/errors_list.h:361
 msgid "Disable"
 msgstr "Deaktiv."
 
@@ -458,7 +458,7 @@ msgstr ""
 "Willst du den letzten Schritt wiederholen, um den Abstand neu einzustellen?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:330 ../../Firmware/mmu2/errors_list.h:340
+#: ../../Firmware/mmu2/errors_list.h:347 ../../Firmware/mmu2/errors_list.h:357
 msgid "Done"
 msgstr "Klar"
 
@@ -553,18 +553,18 @@ msgstr "F. Stau entd."
 msgid "F. runout"
 msgstr "FS. Auslauf"
 
-#. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:169 ../../Firmware/mmu2/errors_list.h:214
-msgid "FILAMENT ALREADY LOA"
+#. MSG_TITLE_FILAMENT_ALREADY_LOADED c=20
+#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:225
+msgid "FIL. ALREADY LOADED"
 msgstr "FIL. BEREITS GELADEN"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:135 ../../Firmware/mmu2/errors_list.h:178
+#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:189
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA N. AUSGELÖST"
 
-#. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:277
+#. MSG_DESC_FINDA_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:293
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -573,7 +573,7 @@ msgstr ""
 "sich? FINDA funktioniert?"
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:225 ../../Firmware/mmu2/errors_list.h:276
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:292
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -581,9 +581,9 @@ msgstr ""
 "FINDA hat beim Laden des Filaments nicht ausgelöst. Stellen Sie sicher, dass"
 " sich das Filament bewegen kann und FINDA funktioniert."
 
-#. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:179
-msgid "FINDA: FILAM. STUCK"
+#. MSG_TITLE_FINDA_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:190
+msgid "FINDA FILAM. STUCK"
 msgstr "FINDA NICHT FIL.FREI"
 
 #. MSG_FS_ACTION c=10
@@ -593,22 +593,22 @@ msgid "FS Action"
 msgstr "FS Aktion"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:191
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSENSOR N. AUSGELÖST"
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:194
 msgid "FSENSOR TOO EARLY"
 msgstr "FSENSOR ZU FRÜH"
 
-#. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:181
-msgid "FSENSOR: FIL. STUCK"
+#. MSG_TITLE_FSENSOR_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:192
+msgid "FSENSOR FIL. STUCK"
 msgstr "FSENSOR N. FIL.FREI"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:218
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:229
 msgid "FW RUNTIME ERROR"
 msgstr "FW-LAUFZEITFEHLER"
 
@@ -707,8 +707,8 @@ msgstr "Fil. nicht geladen"
 msgid "Filament sensor"
 msgstr "Filamentsensor"
 
-#. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:279
+#. MSG_DESC_FSENSOR_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:295
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -717,17 +717,17 @@ msgstr ""
 "Sensor funktioniert?"
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:278
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:294
 msgid ""
-"Filament sensor didn't trigger while loading the filament. Ensure the "
-"filament reached the fsensor and the sensor works."
+"Filament sensor didn't trigger while loading the filament. Ensure the sensor"
+" is calibrated and the filament reached it."
 msgstr ""
 "Der FSensor hat beim Laden des Filaments nicht ausgelöst. Stellen Sie "
 "sicher, dass das Filament den Sensor erreicht hat und der Sensor "
 "funktioniert."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:281
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:297
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -857,7 +857,7 @@ msgid "Heating"
 msgstr "Aufwärmen"
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9272
+#: ../../Firmware/Marlin_main.cpp:9274
 msgid "Heating disabled by safety timer."
 msgstr "Heizung durch Sicherheitstimer deaktiviert."
 
@@ -923,22 +923,22 @@ msgid "I will run z calibration now."
 msgstr "Ich werde jetzt die Z Kalibrierung durchführen."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:199
 msgid "IDLER CANNOT HOME"
 msgstr "SPANNRO. STARTP.FEH."
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:200
 msgid "IDLER CANNOT MOVE"
 msgstr "SPANNROL. SITZT FEST"
 
 #. MSG_TITLE_INSPECT_FINDA c=20
-#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:195
 msgid "INSPECT FINDA"
 msgstr "INSPIZIERE FINDA"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:215
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:226
 msgid "INVALID TOOL"
 msgstr "UNGÜLTIGER FIL.PLATZ"
 
@@ -981,7 +981,7 @@ msgstr ""
 "den Knopf."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:278 ../../Firmware/mmu2/errors_list.h:332
 msgid ""
 "Internal runtime error. Try resetting the MMU or updating the firmware."
 msgstr ""
@@ -1101,12 +1101,12 @@ msgid "Loud"
 msgstr "Laut"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:217
+#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:228
 msgid "MMU FW UPDATE NEEDED"
 msgstr "MMU FW UPDATE NÖTIG"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:262 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:277 ../../Firmware/mmu2/errors_list.h:330
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "MMU Firmware Fehler, setzen Sie die MMU zurück."
 
@@ -1116,7 +1116,7 @@ msgid "MMU Mode"
 msgstr "MMU Mod."
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:212
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:223
 msgid "MMU NOT RESPONDING"
 msgstr "MMU REAGIERT NICHT"
 
@@ -1126,8 +1126,8 @@ msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU-Neuversuch: Wiederherstelle die Temperatur..."
 
 #. MSG_TITLE_SELFTEST_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:165 ../../Firmware/mmu2/errors_list.h:208
-#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:220 ../../Firmware/mmu2/errors_list.h:221
 msgid "MMU SELFTEST FAILED"
 msgstr "MMU SELBSTTEST FEHL."
 
@@ -1144,14 +1144,14 @@ msgid "MMU load fails"
 msgstr "MMU Ladefehler"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:311
+#: ../../Firmware/mmu2/errors_list.h:274 ../../Firmware/mmu2/errors_list.h:327
 msgid "MMU not responding correctly. Check the wiring and connectors."
 msgstr ""
 "MMU antwortet nicht korrekt. Überprüfen Sie die Verkabelung und die "
 "Anschlüsse."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:258 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:326
 msgid "MMU not responding. Check the wiring and connectors."
 msgstr ""
 "MMU antwortet nicht. Überprüfen Sie die Verkabelung und die Anschlüsse."
@@ -1220,18 +1220,18 @@ msgid "Model"
 msgstr "Modell"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:288
-#: ../../Firmware/mmu2/errors_list.h:289 ../../Firmware/mmu2/errors_list.h:290
-#: ../../Firmware/mmu2/errors_list.h:291 ../../Firmware/mmu2/errors_list.h:292
-#: ../../Firmware/mmu2/errors_list.h:293 ../../Firmware/mmu2/errors_list.h:294
-#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:296
-#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:298
-#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:300
-#: ../../Firmware/mmu2/errors_list.h:301 ../../Firmware/mmu2/errors_list.h:302
-#: ../../Firmware/mmu2/errors_list.h:303 ../../Firmware/mmu2/errors_list.h:304
+#: ../../Firmware/mmu2/errors_list.h:250 ../../Firmware/mmu2/errors_list.h:304
 #: ../../Firmware/mmu2/errors_list.h:305 ../../Firmware/mmu2/errors_list.h:306
 #: ../../Firmware/mmu2/errors_list.h:307 ../../Firmware/mmu2/errors_list.h:308
-#: ../../Firmware/mmu2/errors_list.h:309
+#: ../../Firmware/mmu2/errors_list.h:309 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:311 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:313 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:315 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:317 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:319 ../../Firmware/mmu2/errors_list.h:320
+#: ../../Firmware/mmu2/errors_list.h:321 ../../Firmware/mmu2/errors_list.h:322
+#: ../../Firmware/mmu2/errors_list.h:323 ../../Firmware/mmu2/errors_list.h:324
+#: ../../Firmware/mmu2/errors_list.h:325
 msgid "More details online."
 msgstr "Weiter Details online."
 
@@ -1402,7 +1402,7 @@ msgid "Once"
 msgstr "Einmal"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9451 ../../Firmware/messages.cpp:175
+#: ../../Firmware/Marlin_main.cpp:9453 ../../Firmware/messages.cpp:175
 msgid "PAUSED THERMAL ERROR"
 msgstr "PAUSE THERM. FEHLER"
 
@@ -1449,7 +1449,7 @@ msgstr ""
 "Menü Einstellungen -> PINDA kal."
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:193
 msgid "PULLEY CANNOT MOVE"
 msgstr "RIEHMENS. SITZT FEST"
 
@@ -1549,7 +1549,7 @@ msgid "Please place steel sheet on heatbed."
 msgstr "Legen Sie das Stahlblech auf das Heizbett."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11208 ../../Firmware/Marlin_main.cpp:11238
+#: ../../Firmware/Marlin_main.cpp:11210 ../../Firmware/Marlin_main.cpp:11240
 #: ../../Firmware/messages.cpp:79
 msgid "Please press the knob to unload filament"
 msgstr "Drücken Sie den Knopf um das Filament zu entladen."
@@ -1646,7 +1646,7 @@ msgid "Press the knob"
 msgstr "Knopf drücken zum"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11220
+#: ../../Firmware/Marlin_main.cpp:11222
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Drücken Sie den Knopf um die Düse vorzuheizen und fortzufahren."
 
@@ -1704,8 +1704,8 @@ msgstr ""
 "Der Durchmesser der Druckerdüse weicht vom G-Code ab. Bitte überprüfen Sie "
 "den Wert in den Einstellungen. Druck abgebrochen."
 
-#. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:280
+#. MSG_DESC_PULLEY_CANNOT_MOVE c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:296
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 "Der Riemenscheiben- motor ist blockiert. Sicherstellen, dass sich die "
@@ -1718,7 +1718,7 @@ msgid "Pushing filament"
 msgstr "Schiebe Filament"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:171 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:181 ../../Firmware/mmu2/errors_list.h:227
 msgid "QUEUE FULL"
 msgstr "QUEUE VOLL"
 
@@ -1733,7 +1733,7 @@ msgid "Rear side [µm]"
 msgstr "Hinten [µm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10598
+#: ../../Firmware/Marlin_main.cpp:10600
 msgid "Recovering print"
 msgstr "Druck wiederherst"
 
@@ -1748,7 +1748,7 @@ msgid "Rename"
 msgstr "Umbenennen"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:313
+#: ../../Firmware/mmu2/errors_list.h:276 ../../Firmware/mmu2/errors_list.h:329
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1785,7 +1785,7 @@ msgid "Retract from FINDA"
 msgstr "Einziehen von FINDA"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:329 ../../Firmware/mmu2/errors_list.h:339
+#: ../../Firmware/mmu2/errors_list.h:346 ../../Firmware/mmu2/errors_list.h:356
 msgid "Retry"
 msgstr "Wdh."
 
@@ -1821,17 +1821,17 @@ msgid "SD card"
 msgstr "SD Karte"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:197
 msgid "SELECTOR CANNOT HOME"
 msgstr "SELEK. STARTPOSFEHL."
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:198
 msgid "SELECTOR CANNOT MOVE"
 msgstr "SELEKTOR SITZT FEST"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9477 ../../Firmware/messages.cpp:114
+#: ../../Firmware/Marlin_main.cpp:9479 ../../Firmware/messages.cpp:114
 msgid "STOPPED."
 msgstr "GESTOPPT."
 
@@ -2044,7 +2044,7 @@ msgid "Steel sheets"
 msgstr "Stahlbleche"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:333 ../../Firmware/mmu2/errors_list.h:343
+#: ../../Firmware/mmu2/errors_list.h:350 ../../Firmware/mmu2/errors_list.h:360
 msgid "Stop"
 msgstr "Stop"
 
@@ -2071,37 +2071,37 @@ msgid "Swapped"
 msgstr "Ausgetauscht"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2233
+#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2236
 msgid "THERMAL ANOMALY"
 msgstr "THERMISCHE ANOMALIE"
 
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:196
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:198
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:209
 msgid "TMC DRIVER ERROR"
 msgstr "TMC TREIBER FEHLER"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:199
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:212
 msgid "TMC DRIVER RESET"
 msgstr "TMC TREIBER RESET"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:162 ../../Firmware/mmu2/errors_list.h:205
-#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:218
 msgid "TMC DRIVER SHORTED"
 msgstr "TMC KURZSCHLUSS"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:193
-#: ../../Firmware/mmu2/errors_list.h:194 ../../Firmware/mmu2/errors_list.h:195
+#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:206
 msgid "TMC OVERHEAT ERROR"
 msgstr "TMC ÜBERHITZ.FEHL."
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:202
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:164 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:214 ../../Firmware/mmu2/errors_list.h:215
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "TMC UNTERSPANN.FEHL."
 
@@ -2135,7 +2135,7 @@ msgid "Testing filament"
 msgstr "Teste filament"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:286
+#: ../../Firmware/mmu2/errors_list.h:248 ../../Firmware/mmu2/errors_list.h:302
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2143,7 +2143,7 @@ msgstr ""
 "ob irgendetwas seine Bewegung blockiert."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:284
+#: ../../Firmware/mmu2/errors_list.h:245 ../../Firmware/mmu2/errors_list.h:300
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr "Selektor erreicht Startpos. nicht. Prüf, ob etwas blockiert."
@@ -2206,12 +2206,12 @@ msgid "Tune"
 msgstr "Feineinstellung"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:184 ../../Firmware/mmu2/errors_list.h:230
 msgid "UNLOAD MANUALLY"
 msgstr "ENTLADE MANUELL"
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:332 ../../Firmware/mmu2/errors_list.h:342
+#: ../../Firmware/mmu2/errors_list.h:349 ../../Firmware/mmu2/errors_list.h:359
 msgid "Unload"
 msgstr "Entla."
 
@@ -2253,8 +2253,8 @@ msgid "Voltages"
 msgstr "Spannungen"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:190
-#: ../../Firmware/mmu2/errors_list.h:191 ../../Firmware/mmu2/errors_list.h:192
+#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:203
 msgid "WARNING TMC TOO HOT"
 msgstr "WARNUNG TMC ZU HEISS"
 
@@ -2469,12 +2469,12 @@ msgid "Eject from MMU"
 msgstr "Aus MMU auswerf."
 
 #. MSG_TITLE_FILAMENT_EJECTED c=20
-#: ../../Firmware/mmu2/errors_list.h:175 ../../Firmware/mmu2/errors_list.h:220
+#: ../../Firmware/mmu2/errors_list.h:185 ../../Firmware/mmu2/errors_list.h:231
 msgid "FILAMENT EJECTED"
 msgstr "FILAMENT AUSGEWORFEN"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:264 ../../Firmware/mmu2/errors_list.h:317
+#: ../../Firmware/mmu2/errors_list.h:279 ../../Firmware/mmu2/errors_list.h:333
 msgid ""
 "Filament detected unexpectedly. Ensure no filament is loaded. Check the "
 "sensors and wiring."
@@ -2483,12 +2483,12 @@ msgstr ""
 "ist. Überprüfen Sie die Sensoren und die Verkabelung."
 
 #. MSG_TITLE_LOAD_TO_EXTRUDER_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:196
 msgid "LOAD TO EXTR. FAILED"
 msgstr "FEHL LADEN ZUM EXTR:"
 
 #. MSG_DESC_LOAD_TO_EXTRUDER_FAILED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:283
+#: ../../Firmware/mmu2/errors_list.h:244 ../../Firmware/mmu2/errors_list.h:299
 msgid ""
 "Loading to extruder failed. Inspect the filament tip shape. Refine the "
 "sensor calibration, if needed."
@@ -2496,10 +2496,10 @@ msgstr ""
 "Laden in den Extruder fehlgeschlagen. Überprüfe die Form der Filamentspitze."
 " Verfeiner die Sensorkalibrierung, falls erforderlich."
 
-#. MSG_TITLE_MCU_UNDERVOLTAGE_VCC c=20
-#: ../../Firmware/mmu2/errors_list.h:166 ../../Firmware/mmu2/errors_list.h:211
-msgid "MCU UNDERVOLTAGE VCC"
-msgstr "MCU-UNTERSPANN. VCC"
+#. MSG_TITLE_MCU_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:222
+msgid "MMU MCU ERROR"
+msgstr "MMU MCU FEHLER"
 
 #. MSG_MATERIAL_CHANGES c=18
 #: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:1095
@@ -2508,32 +2508,29 @@ msgid "Material changes"
 msgstr "Materialwechsel"
 
 #. MSG_DESC_FILAMENT_EJECTED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:280 ../../Firmware/mmu2/errors_list.h:334
 msgid "Remove the ejected filament from the front of the MMU."
 msgstr "Entfernen Sie das ausgeworfene Filament von der Vorderseite der MMU."
 
-#. MSG_BTN_RESTART_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:331 ../../Firmware/mmu2/errors_list.h:341
-msgid "RstMMU"
-msgstr "RstMMU"
+#. MSG_BTN_RESET_MMU c=8
+#: ../../Firmware/mmu2/errors_list.h:348 ../../Firmware/mmu2/errors_list.h:358
+msgid "ResetMMU"
+msgstr "ResetMMU"
 
 #. MSG_DESC_INSPECT_FINDA c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:282
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:298
 msgid ""
 "Selector can't move due to FINDA detecting a filament. Make sure no filament"
-" is in selector and FINDA works properly."
+" is in Selector and FINDA works properly."
 msgstr ""
 "Selektor kann sich nicht bewegen, da FINDA Fil. erkennt wird. Stelle sicher,"
 " dass sich kein Fil. im Selektor befindet und FINDA ricchtig funktioniert."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:268 ../../Firmware/mmu2/errors_list.h:315
+#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:331
 msgid ""
-"The MMU firmware version incompatible with the printer's FW. Update to "
-"version 2.1.9."
-msgstr ""
-"Die Firmware-Version der MMU ist mit der FW des Druckers nicht kompatibel. "
-"Update auf Version 2.1.9."
+"MMU FW version is incompatible with printer FW.Update to version 3.0.0."
+msgstr "MMU FW ist inkompatibel mit Drucker FW. Update auf Version 3.0.0."
 
 #. MSG_PRELOAD_TO_MMU c=17
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5231
@@ -2548,6 +2545,16 @@ msgstr "MK3-Firmware am MK3S-Drucker erkannt"
 msgid "MK3S firmware detected on MK3 printer"
 msgstr "MK3S-Firmware auf MK3-Drucker erkannt"
 
+#. MSG_TITLE_UNKNOWN_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:232
+msgid "UNKNOWN ERROR"
+msgstr "UNBEKANNTER FEHLER"
+
+#. MSG_DESC_UNKNOWN_ERROR c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:335
+msgid "Unexpected error occurred."
+msgstr "Ein unerwarteter Fehler ist aufgetreten."
+
 #~ msgid "XFLASH init"
 #~ msgstr "XFLASH init"
 

lang/po/Firmware_es.po

@@ -198,7 +198,7 @@ msgid "Brightness"
 msgstr "Brillo"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:178 ../../Firmware/mmu2/errors_list.h:224
 msgid "COMMUNICATION ERROR"
 msgstr "ERROR COMUNICACION"
 
@@ -252,13 +252,13 @@ msgid "Calibration done"
 msgstr "Calibracion OK"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:234 ../../Firmware/mmu2/errors_list.h:285
-#: ../../Firmware/mmu2/errors_list.h:287
+#: ../../Firmware/mmu2/errors_list.h:246 ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2/errors_list.h:303
 msgid "Can't move Selector or Idler."
 msgstr "No se puede mover Selector o Tensor."
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:260 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:328
 msgid ""
 "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
@@ -419,7 +419,7 @@ msgid "Dim"
 msgstr "Oscuro"
 
 #. MSG_BTN_DISABLE_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:334 ../../Firmware/mmu2/errors_list.h:344
+#: ../../Firmware/mmu2/errors_list.h:351 ../../Firmware/mmu2/errors_list.h:361
 msgid "Disable"
 msgstr "Desact."
 
@@ -455,7 +455,7 @@ msgstr ""
 "Quieres repetir el ultimo paso para reajustar la distancia boquilla-base?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:330 ../../Firmware/mmu2/errors_list.h:340
+#: ../../Firmware/mmu2/errors_list.h:347 ../../Firmware/mmu2/errors_list.h:357
 msgid "Done"
 msgstr "Listo"
 
@@ -556,18 +556,18 @@ msgstr "Det. atasco f"
 msgid "F. runout"
 msgstr "Fin fil."
 
-#. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:169 ../../Firmware/mmu2/errors_list.h:214
-msgid "FILAMENT ALREADY LOA"
+#. MSG_TITLE_FILAMENT_ALREADY_LOADED c=20
+#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:225
+msgid "FIL. ALREADY LOADED"
 msgstr "FIL. YA CARGADO"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:135 ../../Firmware/mmu2/errors_list.h:178
+#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:189
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA NO SE ACTIVO"
 
-#. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:277
+#. MSG_DESC_FINDA_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:293
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -576,7 +576,7 @@ msgstr ""
 "manualmente. Comprueba que el fi-lamento puede mover-se y FINDA funciona."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:225 ../../Firmware/mmu2/errors_list.h:276
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:292
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -584,10 +584,10 @@ msgstr ""
 "FINDA no se activó al cargar el filamento. Asegúrate de que el filamento "
 "puede moverse y FINDA funciona."
 
-#. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:179
-msgid "FINDA: FILAM. STUCK"
-msgstr "FINDA: ATASCO FIL."
+#. MSG_TITLE_FINDA_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:190
+msgid "FINDA FILAM. STUCK"
+msgstr "FINDA ATASCO FIL."
 
 #. MSG_FS_ACTION c=10
 #: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:4048
@@ -596,22 +596,22 @@ msgid "FS Action"
 msgstr "FS accion"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:191
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSENSOR NO SE ACTIVO"
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:194
 msgid "FSENSOR TOO EARLY"
 msgstr "FSENSOR MUY PRONTO"
 
-#. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:181
-msgid "FSENSOR: FIL. STUCK"
-msgstr "FSENSOR: ATASCO FIL."
+#. MSG_TITLE_FSENSOR_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:192
+msgid "FSENSOR FIL. STUCK"
+msgstr "FSENSOR ATASCO FIL."
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:218
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:229
 msgid "FW RUNTIME ERROR"
 msgstr "ERROR EJECUCION FW"
 
@@ -710,8 +710,8 @@ msgstr "Fil. no introducido"
 msgid "Filament sensor"
 msgstr "Sensor de fil."
 
-#. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:279
+#. MSG_DESC_FSENSOR_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:295
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -720,16 +720,16 @@ msgstr ""
 "Asegúrate de que el filamento puede moverse y el sensor funciona."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:278
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:294
 msgid ""
-"Filament sensor didn't trigger while loading the filament. Ensure the "
-"filament reached the fsensor and the sensor works."
+"Filament sensor didn't trigger while loading the filament. Ensure the sensor"
+" is calibrated and the filament reached it."
 msgstr ""
 "El sensor de filamento no se activó al cargar el filamento. Asegúrate de que"
 " el filamento llegó al sensor y que éste funciona."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:281
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:297
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -860,7 +860,7 @@ msgid "Heating"
 msgstr "Calentando..."
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9272
+#: ../../Firmware/Marlin_main.cpp:9274
 msgid "Heating disabled by safety timer."
 msgstr "Calentadores desactivados por el temporizador de seguridad."
 
@@ -924,22 +924,22 @@ msgid "I will run z calibration now."
 msgstr "Voy a hacer Calibracion Z ahora."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:199
 msgid "IDLER CANNOT HOME"
 msgstr "TENSOR: ERROR HOME"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:200
 msgid "IDLER CANNOT MOVE"
 msgstr "TENSOR: ERROR MOV."
 
 #. MSG_TITLE_INSPECT_FINDA c=20
-#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:195
 msgid "INSPECT FINDA"
 msgstr "INSPECCIONAR FINDA"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:215
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:226
 msgid "INVALID TOOL"
 msgstr "HERR. INVALIDA"
 
@@ -981,7 +981,7 @@ msgstr ""
 "Inserta el filamento (no lo cargue) en el extrusor y luego presiona el dial."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:278 ../../Firmware/mmu2/errors_list.h:332
 msgid ""
 "Internal runtime error. Try resetting the MMU or updating the firmware."
 msgstr ""
@@ -1102,12 +1102,12 @@ msgid "Loud"
 msgstr "Alto"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:217
+#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:228
 msgid "MMU FW UPDATE NEEDED"
 msgstr "ACT. FW MMU PRECISA"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:262 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:277 ../../Firmware/mmu2/errors_list.h:330
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "Error interno del firmware MMU, reinicia el MMU."
 
@@ -1117,7 +1117,7 @@ msgid "MMU Mode"
 msgstr "Modo MMU"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:212
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:223
 msgid "MMU NOT RESPONDING"
 msgstr "MMU NO RESPONDE"
 
@@ -1127,8 +1127,8 @@ msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU Reintento: Restaurando temperatura..."
 
 #. MSG_TITLE_SELFTEST_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:165 ../../Firmware/mmu2/errors_list.h:208
-#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:220 ../../Firmware/mmu2/errors_list.h:221
 msgid "MMU SELFTEST FAILED"
 msgstr "MMU SELFTEST FALLO"
 
@@ -1145,12 +1145,12 @@ msgid "MMU load fails"
 msgstr "Carga MMU falla"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:311
+#: ../../Firmware/mmu2/errors_list.h:274 ../../Firmware/mmu2/errors_list.h:327
 msgid "MMU not responding correctly. Check the wiring and connectors."
 msgstr "MMU no responde correctamente. Revise los cables y conectores."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:258 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:326
 msgid "MMU not responding. Check the wiring and connectors."
 msgstr "La MMU no responde. Revise los cables y conectores."
 
@@ -1218,18 +1218,18 @@ msgid "Model"
 msgstr "Modelo"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:288
-#: ../../Firmware/mmu2/errors_list.h:289 ../../Firmware/mmu2/errors_list.h:290
-#: ../../Firmware/mmu2/errors_list.h:291 ../../Firmware/mmu2/errors_list.h:292
-#: ../../Firmware/mmu2/errors_list.h:293 ../../Firmware/mmu2/errors_list.h:294
-#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:296
-#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:298
-#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:300
-#: ../../Firmware/mmu2/errors_list.h:301 ../../Firmware/mmu2/errors_list.h:302
-#: ../../Firmware/mmu2/errors_list.h:303 ../../Firmware/mmu2/errors_list.h:304
+#: ../../Firmware/mmu2/errors_list.h:250 ../../Firmware/mmu2/errors_list.h:304
 #: ../../Firmware/mmu2/errors_list.h:305 ../../Firmware/mmu2/errors_list.h:306
 #: ../../Firmware/mmu2/errors_list.h:307 ../../Firmware/mmu2/errors_list.h:308
-#: ../../Firmware/mmu2/errors_list.h:309
+#: ../../Firmware/mmu2/errors_list.h:309 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:311 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:313 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:315 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:317 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:319 ../../Firmware/mmu2/errors_list.h:320
+#: ../../Firmware/mmu2/errors_list.h:321 ../../Firmware/mmu2/errors_list.h:322
+#: ../../Firmware/mmu2/errors_list.h:323 ../../Firmware/mmu2/errors_list.h:324
+#: ../../Firmware/mmu2/errors_list.h:325
 msgid "More details online."
 msgstr "Mas detalles online."
 
@@ -1403,7 +1403,7 @@ msgid "Once"
 msgstr "Una vez"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9451 ../../Firmware/messages.cpp:175
+#: ../../Firmware/Marlin_main.cpp:9453 ../../Firmware/messages.cpp:175
 msgid "PAUSED THERMAL ERROR"
 msgstr "PAUSA ERROR TERMICO"
 
@@ -1450,7 +1450,7 @@ msgstr ""
 "menu Configuracion -> Cal. PINDA"
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:193
 msgid "PULLEY CANNOT MOVE"
 msgstr "POLEA: ERROR MOV."
 
@@ -1548,7 +1548,7 @@ msgid "Please place steel sheet on heatbed."
 msgstr "Coloca la lam. de acero en la base calefactable."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11208 ../../Firmware/Marlin_main.cpp:11238
+#: ../../Firmware/Marlin_main.cpp:11210 ../../Firmware/Marlin_main.cpp:11240
 #: ../../Firmware/messages.cpp:79
 msgid "Please press the knob to unload filament"
 msgstr "Pulsa el dial para descargar el filamento"
@@ -1645,7 +1645,7 @@ msgid "Press the knob"
 msgstr "Pulsa el dial"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11220
+#: ../../Firmware/Marlin_main.cpp:11222
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Pulsa el dial para precalentar la boquilla y continue."
 
@@ -1703,8 +1703,8 @@ msgstr ""
 "Diametro nozzle Impresora difiere de cod.G. Comprueba los valores en "
 "ajustes. Impresion cancelada."
 
-#. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:280
+#. MSG_DESC_PULLEY_CANNOT_MOVE c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:296
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 "El motor de la polea se ha parado. Asegúrate de que la polea puede moverse y"
@@ -1717,7 +1717,7 @@ msgid "Pushing filament"
 msgstr "Empujando filamento"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:171 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:181 ../../Firmware/mmu2/errors_list.h:227
 msgid "QUEUE FULL"
 msgstr "COLA LLENA"
 
@@ -1732,7 +1732,7 @@ msgid "Rear side [µm]"
 msgstr "Trasera [µm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10598
+#: ../../Firmware/Marlin_main.cpp:10600
 msgid "Recovering print"
 msgstr "Recuper. impresion"
 
@@ -1748,7 +1748,7 @@ msgid "Rename"
 msgstr "Renombrar"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:313
+#: ../../Firmware/mmu2/errors_list.h:276 ../../Firmware/mmu2/errors_list.h:329
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1785,7 +1785,7 @@ msgid "Retract from FINDA"
 msgstr "Retraer del FINDA"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:329 ../../Firmware/mmu2/errors_list.h:339
+#: ../../Firmware/mmu2/errors_list.h:346 ../../Firmware/mmu2/errors_list.h:356
 msgid "Retry"
 msgstr "Reint"
 
@@ -1821,17 +1821,17 @@ msgid "SD card"
 msgstr "Tarj. SD"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:197
 msgid "SELECTOR CANNOT HOME"
 msgstr "SELECT. SIN HOME"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:198
 msgid "SELECTOR CANNOT MOVE"
 msgstr "SELECT. SIN MOVERSE"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9477 ../../Firmware/messages.cpp:114
+#: ../../Firmware/Marlin_main.cpp:9479 ../../Firmware/messages.cpp:114
 msgid "STOPPED."
 msgstr "PARADA"
 
@@ -2049,7 +2049,7 @@ msgid "Steel sheets"
 msgstr "Lamina de acero"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:333 ../../Firmware/mmu2/errors_list.h:343
+#: ../../Firmware/mmu2/errors_list.h:350 ../../Firmware/mmu2/errors_list.h:360
 msgid "Stop"
 msgstr "Parar"
 
@@ -2076,37 +2076,37 @@ msgid "Swapped"
 msgstr "Intercambiado"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2233
+#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2236
 msgid "THERMAL ANOMALY"
 msgstr "ANOMALIA TERMICA"
 
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:196
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:198
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:209
 msgid "TMC DRIVER ERROR"
 msgstr "ERROR DRIVER TMC"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:199
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:212
 msgid "TMC DRIVER RESET"
 msgstr "RESET DRIVER TMC"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:162 ../../Firmware/mmu2/errors_list.h:205
-#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:218
 msgid "TMC DRIVER SHORTED"
 msgstr "CORTO DRIVER TMC"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:193
-#: ../../Firmware/mmu2/errors_list.h:194 ../../Firmware/mmu2/errors_list.h:195
+#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:206
 msgid "TMC OVERHEAT ERROR"
 msgstr "ERROR SOBRECAL TMC"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:202
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:164 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:214 ../../Firmware/mmu2/errors_list.h:215
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "ERROR SBRVOLTAJE TMC"
 
@@ -2140,7 +2140,7 @@ msgid "Testing filament"
 msgstr "Probando filamento"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:286
+#: ../../Firmware/mmu2/errors_list.h:248 ../../Firmware/mmu2/errors_list.h:302
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2148,7 +2148,7 @@ msgstr ""
 "movimiento."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:284
+#: ../../Firmware/mmu2/errors_list.h:245 ../../Firmware/mmu2/errors_list.h:300
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2213,12 +2213,12 @@ msgid "Tune"
 msgstr "Ajustar"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:184 ../../Firmware/mmu2/errors_list.h:230
 msgid "UNLOAD MANUALLY"
 msgstr "DESCARGA MANUAL"
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:332 ../../Firmware/mmu2/errors_list.h:342
+#: ../../Firmware/mmu2/errors_list.h:349 ../../Firmware/mmu2/errors_list.h:359
 msgid "Unload"
 msgstr "Desc."
 
@@ -2258,8 +2258,8 @@ msgid "Voltages"
 msgstr "Voltajes"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:190
-#: ../../Firmware/mmu2/errors_list.h:191 ../../Firmware/mmu2/errors_list.h:192
+#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:203
 msgid "WARNING TMC TOO HOT"
 msgstr "AVISO TMC DEM. CALOR"
 
@@ -2464,12 +2464,12 @@ msgid "MMU power fails"
 msgstr "Fallo red MMU"
 
 #. MSG_TITLE_FILAMENT_EJECTED c=20
-#: ../../Firmware/mmu2/errors_list.h:175 ../../Firmware/mmu2/errors_list.h:220
+#: ../../Firmware/mmu2/errors_list.h:185 ../../Firmware/mmu2/errors_list.h:231
 msgid "FILAMENT EJECTED"
 msgstr "FILAMENTO EXPULSADO"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:264 ../../Firmware/mmu2/errors_list.h:317
+#: ../../Firmware/mmu2/errors_list.h:279 ../../Firmware/mmu2/errors_list.h:333
 msgid ""
 "Filament detected unexpectedly. Ensure no filament is loaded. Check the "
 "sensors and wiring."
@@ -2478,12 +2478,12 @@ msgstr ""
 "filamento cargado. Compruebe los sensores y el cableado."
 
 #. MSG_TITLE_LOAD_TO_EXTRUDER_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:196
 msgid "LOAD TO EXTR. FAILED"
 msgstr "FALL. CARGAR A EXTR."
 
 #. MSG_DESC_LOAD_TO_EXTRUDER_FAILED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:283
+#: ../../Firmware/mmu2/errors_list.h:244 ../../Firmware/mmu2/errors_list.h:299
 msgid ""
 "Loading to extruder failed. Inspect the filament tip shape. Refine the "
 "sensor calibration, if needed."
@@ -2491,10 +2491,10 @@ msgstr ""
 "Error al cargar en la extrusora. Inspeccione la forma de la punta del "
 "filamento. Refine la calibración del sensor, si es necesario."
 
-#. MSG_TITLE_MCU_UNDERVOLTAGE_VCC c=20
-#: ../../Firmware/mmu2/errors_list.h:166 ../../Firmware/mmu2/errors_list.h:211
-msgid "MCU UNDERVOLTAGE VCC"
-msgstr "MCU BAJO VOLTAJE VCC"
+#. MSG_TITLE_MCU_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:222
+msgid "MMU MCU ERROR"
+msgstr "MMU MCU ERROR"
 
 #. MSG_MATERIAL_CHANGES c=18
 #: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:1095
@@ -2503,33 +2503,32 @@ msgid "Material changes"
 msgstr "Cambios materiales"
 
 #. MSG_DESC_FILAMENT_EJECTED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:280 ../../Firmware/mmu2/errors_list.h:334
 msgid "Remove the ejected filament from the front of the MMU."
 msgstr "Retire el filamento expulsado de la parte frontal de la MMU."
 
-#. MSG_BTN_RESTART_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:331 ../../Firmware/mmu2/errors_list.h:341
-msgid "RstMMU"
-msgstr "RstMMU"
+#. MSG_BTN_RESET_MMU c=8
+#: ../../Firmware/mmu2/errors_list.h:348 ../../Firmware/mmu2/errors_list.h:358
+msgid "ResetMMU"
+msgstr "ResetMMU"
 
 #. MSG_DESC_INSPECT_FINDA c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:282
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:298
 msgid ""
 "Selector can't move due to FINDA detecting a filament. Make sure no filament"
-" is in selector and FINDA works properly."
+" is in Selector and FINDA works properly."
 msgstr ""
 "El selector no se puede mover debido a que FINDA detecta un filamento. "
 "Asegúrese de que no haya fil. en el selector y que FINDA funcione "
 "correctamente."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:268 ../../Firmware/mmu2/errors_list.h:315
+#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:331
 msgid ""
-"The MMU firmware version incompatible with the printer's FW. Update to "
-"version 2.1.9."
+"MMU FW version is incompatible with printer FW.Update to version 3.0.0."
 msgstr ""
 "La versión de firmware de la MMU es incompatible con el FW de la impresora. "
-"Actualizar a la versión 2.1.9."
+"Actualizar a la versión 3.0.0."
 
 #. MSG_PRELOAD_TO_MMU c=17
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5231
@@ -2544,6 +2543,16 @@ msgstr "Firmware MK3 detectado en impresora MK3S"
 msgid "MK3S firmware detected on MK3 printer"
 msgstr "Firmware MK3S detectado en impresora MK3"
 
+#. MSG_TITLE_UNKNOWN_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:232
+msgid "UNKNOWN ERROR"
+msgstr "ERROR DESCONOCIDO"
+
+#. MSG_DESC_UNKNOWN_ERROR c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:335
+msgid "Unexpected error occurred."
+msgstr "Ocurrió un error inesperado."
+
 #~ msgid "XFLASH init"
 #~ msgstr "XFLASH init"
 

lang/po/Firmware_fr.po

@@ -199,7 +199,7 @@ msgid "Brightness"
 msgstr "Luminosite"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:178 ../../Firmware/mmu2/errors_list.h:224
 msgid "COMMUNICATION ERROR"
 msgstr "ERREUR COMMUNICATION"
 
@@ -253,13 +253,13 @@ msgid "Calibration done"
 msgstr "Calibration terminee"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:234 ../../Firmware/mmu2/errors_list.h:285
-#: ../../Firmware/mmu2/errors_list.h:287
+#: ../../Firmware/mmu2/errors_list.h:246 ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2/errors_list.h:303
 msgid "Can't move Selector or Idler."
 msgstr "Impossible de deplacer le Selecteur ou l'Idler."
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:260 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:328
 msgid ""
 "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
@@ -422,7 +422,7 @@ msgid "Dim"
 msgstr "Sombre"
 
 #. MSG_BTN_DISABLE_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:334 ../../Firmware/mmu2/errors_list.h:344
+#: ../../Firmware/mmu2/errors_list.h:351 ../../Firmware/mmu2/errors_list.h:361
 msgid "Disable"
 msgstr "Desact."
 
@@ -459,7 +459,7 @@ msgstr ""
 "plateau?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:330 ../../Firmware/mmu2/errors_list.h:340
+#: ../../Firmware/mmu2/errors_list.h:347 ../../Firmware/mmu2/errors_list.h:357
 msgid "Done"
 msgstr "Fait"
 
@@ -560,18 +560,18 @@ msgstr "Detect bour F"
 msgid "F. runout"
 msgstr "Fin de F."
 
-#. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:169 ../../Firmware/mmu2/errors_list.h:214
-msgid "FILAMENT ALREADY LOA"
+#. MSG_TITLE_FILAMENT_ALREADY_LOADED c=20
+#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:225
+msgid "FIL. ALREADY LOADED"
 msgstr "FILAMENT DEJA CHARGE"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:135 ../../Firmware/mmu2/errors_list.h:178
+#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:189
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA NON DECLENCHEE"
 
-#. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:277
+#. MSG_DESC_FINDA_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:293
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -581,7 +581,7 @@ msgstr ""
 "fonctionne."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:225 ../../Firmware/mmu2/errors_list.h:276
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:292
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -589,10 +589,10 @@ msgstr ""
 "La FINDA ne s'est pas declenchee lors du chargement du filament. Assurez-"
 "vous que le filament peut bouger et que la FINDA fonctionne."
 
-#. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:179
-msgid "FINDA: FILAM. STUCK"
-msgstr "FINDA: FILAM. BLOQUE"
+#. MSG_TITLE_FINDA_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:190
+msgid "FINDA FILAM. STUCK"
+msgstr "FINDA FILAM. BLOQUE"
 
 #. MSG_FS_ACTION c=10
 #: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:4048
@@ -601,22 +601,22 @@ msgid "FS Action"
 msgstr "Action FS"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:191
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "CAPTEUR F. NON DECL."
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:194
 msgid "FSENSOR TOO EARLY"
 msgstr "CAPTEUR F TROP TOT"
 
-#. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:181
-msgid "FSENSOR: FIL. STUCK"
+#. MSG_TITLE_FSENSOR_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:192
+msgid "FSENSOR FIL. STUCK"
 msgstr "CAPTEUR F: F. BLOQUE"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:218
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:229
 msgid "FW RUNTIME ERROR"
 msgstr "ERREUR EXECUTION FW"
 
@@ -715,8 +715,8 @@ msgstr "Filament non charge"
 msgid "Filament sensor"
 msgstr "Capteur Fil."
 
-#. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:279
+#. MSG_DESC_FSENSOR_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:295
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -725,16 +725,16 @@ msgstr ""
 "que le filament peut bouger et que le capteur fonctionne."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:278
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:294
 msgid ""
-"Filament sensor didn't trigger while loading the filament. Ensure the "
-"filament reached the fsensor and the sensor works."
+"Filament sensor didn't trigger while loading the filament. Ensure the sensor"
+" is calibrated and the filament reached it."
 msgstr ""
 "Capteur de f. non declenche lors du chargement du filament. Assurez-vous que"
 " le filament a atteint le capteur f et que le capteur fonctionne."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:281
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:297
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -864,7 +864,7 @@ msgid "Heating"
 msgstr "Chauffe"
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9272
+#: ../../Firmware/Marlin_main.cpp:9274
 msgid "Heating disabled by safety timer."
 msgstr "Chauffage desactivee par le compteur de securite."
 
@@ -930,22 +930,22 @@ msgid "I will run z calibration now."
 msgstr "Je vais maintenant lancer la calibration Z."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:199
 msgid "IDLER CANNOT HOME"
 msgstr "RAZ IDLER IMPOSSIBLE"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:200
 msgid "IDLER CANNOT MOVE"
 msgstr "ECHEC MOUV.T IDLER"
 
 #. MSG_TITLE_INSPECT_FINDA c=20
-#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:195
 msgid "INSPECT FINDA"
 msgstr "INSPECTER FINDA"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:215
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:226
 msgid "INVALID TOOL"
 msgstr "OUTIL INVALIDE"
 
@@ -988,7 +988,7 @@ msgstr ""
 "appuyez sur le bouton."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:278 ../../Firmware/mmu2/errors_list.h:332
 msgid ""
 "Internal runtime error. Try resetting the MMU or updating the firmware."
 msgstr ""
@@ -1109,12 +1109,12 @@ msgid "Loud"
 msgstr "Fort"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:217
+#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:228
 msgid "MMU FW UPDATE NEEDED"
 msgstr "MAJ FW MMU NECESS."
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:262 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:277 ../../Firmware/mmu2/errors_list.h:330
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "Erreur interne du FW du MMU, reinitialiser le MMU."
 
@@ -1124,7 +1124,7 @@ msgid "MMU Mode"
 msgstr "Mode MMU"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:212
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:223
 msgid "MMU NOT RESPONDING"
 msgstr "LE MMU NE REPOND PAS"
 
@@ -1134,8 +1134,8 @@ msgid "MMU Retry: Restoring temperature..."
 msgstr "Nouvelle tentative MMU: Restauration de la temperature..."
 
 #. MSG_TITLE_SELFTEST_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:165 ../../Firmware/mmu2/errors_list.h:208
-#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:220 ../../Firmware/mmu2/errors_list.h:221
 msgid "MMU SELFTEST FAILED"
 msgstr "MMU AUTO-TEST ECHEC"
 
@@ -1152,13 +1152,13 @@ msgid "MMU load fails"
 msgstr "Def. charg. MMU"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:311
+#: ../../Firmware/mmu2/errors_list.h:274 ../../Firmware/mmu2/errors_list.h:327
 msgid "MMU not responding correctly. Check the wiring and connectors."
 msgstr ""
 "MMU ne repond pas correctement. Verifiez le cablage et les connecteurs."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:258 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:326
 msgid "MMU not responding. Check the wiring and connectors."
 msgstr "MMU ne repond pas. Verifiez le cablage et les connecteurs."
 
@@ -1226,18 +1226,18 @@ msgid "Model"
 msgstr "Modele"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:288
-#: ../../Firmware/mmu2/errors_list.h:289 ../../Firmware/mmu2/errors_list.h:290
-#: ../../Firmware/mmu2/errors_list.h:291 ../../Firmware/mmu2/errors_list.h:292
-#: ../../Firmware/mmu2/errors_list.h:293 ../../Firmware/mmu2/errors_list.h:294
-#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:296
-#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:298
-#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:300
-#: ../../Firmware/mmu2/errors_list.h:301 ../../Firmware/mmu2/errors_list.h:302
-#: ../../Firmware/mmu2/errors_list.h:303 ../../Firmware/mmu2/errors_list.h:304
+#: ../../Firmware/mmu2/errors_list.h:250 ../../Firmware/mmu2/errors_list.h:304
 #: ../../Firmware/mmu2/errors_list.h:305 ../../Firmware/mmu2/errors_list.h:306
 #: ../../Firmware/mmu2/errors_list.h:307 ../../Firmware/mmu2/errors_list.h:308
-#: ../../Firmware/mmu2/errors_list.h:309
+#: ../../Firmware/mmu2/errors_list.h:309 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:311 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:313 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:315 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:317 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:319 ../../Firmware/mmu2/errors_list.h:320
+#: ../../Firmware/mmu2/errors_list.h:321 ../../Firmware/mmu2/errors_list.h:322
+#: ../../Firmware/mmu2/errors_list.h:323 ../../Firmware/mmu2/errors_list.h:324
+#: ../../Firmware/mmu2/errors_list.h:325
 msgid "More details online."
 msgstr "Plus de details en ligne."
 
@@ -1410,7 +1410,7 @@ msgid "Once"
 msgstr "1 fois"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9451 ../../Firmware/messages.cpp:175
+#: ../../Firmware/Marlin_main.cpp:9453 ../../Firmware/messages.cpp:175
 msgid "PAUSED THERMAL ERROR"
 msgstr "PAUSE ERREUR THERM."
 
@@ -1457,7 +1457,7 @@ msgstr ""
 "dans le menu Reglages-> Calib. PINDA"
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:193
 msgid "PULLEY CANNOT MOVE"
 msgstr "ECHEC MOUV.T POULIE"
 
@@ -1556,7 +1556,7 @@ msgid "Please place steel sheet on heatbed."
 msgstr "Placez la plaque en acier sur le plateau."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11208 ../../Firmware/Marlin_main.cpp:11238
+#: ../../Firmware/Marlin_main.cpp:11210 ../../Firmware/Marlin_main.cpp:11240
 #: ../../Firmware/messages.cpp:79
 msgid "Please press the knob to unload filament"
 msgstr "Appuyez sur le bouton pour decharger le filament"
@@ -1653,7 +1653,7 @@ msgid "Press the knob"
 msgstr "App. sur sur bouton"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11220
+#: ../../Firmware/Marlin_main.cpp:11222
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Appuyez sur le bouton pour prechauffer la buse et continuer."
 
@@ -1711,8 +1711,8 @@ msgstr ""
 "Diamètre de la buse diffère du G-Code. Vérifiez la valeur. Impression "
 "annulee."
 
-#. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:280
+#. MSG_DESC_PULLEY_CANNOT_MOVE c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:296
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 "Le moteur de la poulie s'est bloque. Assurez-vous que la poulie peut bouger "
@@ -1725,7 +1725,7 @@ msgid "Pushing filament"
 msgstr "Chargement filament"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:171 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:181 ../../Firmware/mmu2/errors_list.h:227
 msgid "QUEUE FULL"
 msgstr "FILE PLEINE"
 
@@ -1740,7 +1740,7 @@ msgid "Rear side [µm]"
 msgstr "Arriere [µm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10598
+#: ../../Firmware/Marlin_main.cpp:10600
 msgid "Recovering print"
 msgstr "Recup. impression"
 
@@ -1756,7 +1756,7 @@ msgid "Rename"
 msgstr "Renommer"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:313
+#: ../../Firmware/mmu2/errors_list.h:276 ../../Firmware/mmu2/errors_list.h:329
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1793,7 +1793,7 @@ msgid "Retract from FINDA"
 msgstr "Rétraction de FINDA"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:329 ../../Firmware/mmu2/errors_list.h:339
+#: ../../Firmware/mmu2/errors_list.h:346 ../../Firmware/mmu2/errors_list.h:356
 msgid "Retry"
 msgstr "Ref."
 
@@ -1829,17 +1829,17 @@ msgid "SD card"
 msgstr "Carte SD"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:197
 msgid "SELECTOR CANNOT HOME"
 msgstr "ECHEC RAZ SELECTEUR"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:198
 msgid "SELECTOR CANNOT MOVE"
 msgstr "ECHEC MOUV.T SELECT."
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9477 ../../Firmware/messages.cpp:114
+#: ../../Firmware/Marlin_main.cpp:9479 ../../Firmware/messages.cpp:114
 msgid "STOPPED."
 msgstr "ARRETE."
 
@@ -2055,7 +2055,7 @@ msgid "Steel sheets"
 msgstr "Plaques en acier"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:333 ../../Firmware/mmu2/errors_list.h:343
+#: ../../Firmware/mmu2/errors_list.h:350 ../../Firmware/mmu2/errors_list.h:360
 msgid "Stop"
 msgstr "Stop"
 
@@ -2082,37 +2082,37 @@ msgid "Swapped"
 msgstr "Echange"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2233
+#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2236
 msgid "THERMAL ANOMALY"
 msgstr "ANOMALIE THERMIQUE"
 
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:196
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:198
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:209
 msgid "TMC DRIVER ERROR"
 msgstr "ERREUR DU DRIVER TMC"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:199
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:212
 msgid "TMC DRIVER RESET"
 msgstr "REINIT DU DRIVER TMC"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:162 ../../Firmware/mmu2/errors_list.h:205
-#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:218
 msgid "TMC DRIVER SHORTED"
 msgstr "CC DU DRIVER TMC"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:193
-#: ../../Firmware/mmu2/errors_list.h:194 ../../Firmware/mmu2/errors_list.h:195
+#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:206
 msgid "TMC OVERHEAT ERROR"
 msgstr "ERR SURCHAUFFE TMC"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:202
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:164 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:214 ../../Firmware/mmu2/errors_list.h:215
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "ERR SOUS TENSION TMC"
 
@@ -2146,7 +2146,7 @@ msgid "Testing filament"
 msgstr "Test du filament"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:286
+#: ../../Firmware/mmu2/errors_list.h:248 ../../Firmware/mmu2/errors_list.h:302
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2154,7 +2154,7 @@ msgstr ""
 "que ce soit qui bloque son mouvement."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:284
+#: ../../Firmware/mmu2/errors_list.h:245 ../../Firmware/mmu2/errors_list.h:300
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2218,12 +2218,12 @@ msgid "Tune"
 msgstr "Regler"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:184 ../../Firmware/mmu2/errors_list.h:230
 msgid "UNLOAD MANUALLY"
 msgstr "DECHARGER MANUEL.T"
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:332 ../../Firmware/mmu2/errors_list.h:342
+#: ../../Firmware/mmu2/errors_list.h:349 ../../Firmware/mmu2/errors_list.h:359
 msgid "Unload"
 msgstr "Dech."
 
@@ -2263,8 +2263,8 @@ msgid "Voltages"
 msgstr "Tensions"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:190
-#: ../../Firmware/mmu2/errors_list.h:191 ../../Firmware/mmu2/errors_list.h:192
+#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:203
 msgid "WARNING TMC TOO HOT"
 msgstr "ATT TMC TROP CHAUD"
 
@@ -2479,12 +2479,12 @@ msgid "MMU power fails"
 msgstr "Def. alim. MMU"
 
 #. MSG_TITLE_FILAMENT_EJECTED c=20
-#: ../../Firmware/mmu2/errors_list.h:175 ../../Firmware/mmu2/errors_list.h:220
+#: ../../Firmware/mmu2/errors_list.h:185 ../../Firmware/mmu2/errors_list.h:231
 msgid "FILAMENT EJECTED"
 msgstr "FILAMENT ÉJECTÉ"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:264 ../../Firmware/mmu2/errors_list.h:317
+#: ../../Firmware/mmu2/errors_list.h:279 ../../Firmware/mmu2/errors_list.h:333
 msgid ""
 "Filament detected unexpectedly. Ensure no filament is loaded. Check the "
 "sensors and wiring."
@@ -2493,12 +2493,12 @@ msgstr ""
 " chargé. Vérifiez les capteurs et le câblage."
 
 #. MSG_TITLE_LOAD_TO_EXTRUDER_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:196
 msgid "LOAD TO EXTR. FAILED"
 msgstr "ÉCHOUÉ CHARGE A EXTR"
 
 #. MSG_DESC_LOAD_TO_EXTRUDER_FAILED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:283
+#: ../../Firmware/mmu2/errors_list.h:244 ../../Firmware/mmu2/errors_list.h:299
 msgid ""
 "Loading to extruder failed. Inspect the filament tip shape. Refine the "
 "sensor calibration, if needed."
@@ -2506,10 +2506,10 @@ msgstr ""
 "Le chargement dans l'extrudeuse a échoué. Inspectez la forme de la pointe du"
 " filament. Affiner l'étalonnage du capteur, si nécessaire."
 
-#. MSG_TITLE_MCU_UNDERVOLTAGE_VCC c=20
-#: ../../Firmware/mmu2/errors_list.h:166 ../../Firmware/mmu2/errors_list.h:211
-msgid "MCU UNDERVOLTAGE VCC"
-msgstr "MCU SOUS-TENSION VCC"
+#. MSG_TITLE_MCU_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:222
+msgid "MMU MCU ERROR"
+msgstr "MMU MCU ERREUR"
 
 #. MSG_MATERIAL_CHANGES c=18
 #: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:1095
@@ -2518,32 +2518,31 @@ msgid "Material changes"
 msgstr "Changes matériels"
 
 #. MSG_DESC_FILAMENT_EJECTED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:280 ../../Firmware/mmu2/errors_list.h:334
 msgid "Remove the ejected filament from the front of the MMU."
 msgstr "Retirez le filament éjecté de l'avant de la MMU."
 
-#. MSG_BTN_RESTART_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:331 ../../Firmware/mmu2/errors_list.h:341
-msgid "RstMMU"
-msgstr "RstMMU"
+#. MSG_BTN_RESET_MMU c=8
+#: ../../Firmware/mmu2/errors_list.h:348 ../../Firmware/mmu2/errors_list.h:358
+msgid "ResetMMU"
+msgstr "ResetMMU"
 
 #. MSG_DESC_INSPECT_FINDA c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:282
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:298
 msgid ""
 "Selector can't move due to FINDA detecting a filament. Make sure no filament"
-" is in selector and FINDA works properly."
+" is in Selector and FINDA works properly."
 msgstr ""
 "Le sélecteur ne peut pas bouger car FINDA détecte un filament. Assurez-vous "
 "qu'aucun fil. n'est dans le sélecteur et que FINDA fonctionne correctement."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:268 ../../Firmware/mmu2/errors_list.h:315
+#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:331
 msgid ""
-"The MMU firmware version incompatible with the printer's FW. Update to "
-"version 2.1.9."
+"MMU FW version is incompatible with printer FW.Update to version 3.0.0."
 msgstr ""
 "La version du MMU est incompatible avec le FW de l'imprimante. Mise à jour "
-"vers la version 2.1.9."
+"vers la version 3.0.0."
 
 #. MSG_PRELOAD_TO_MMU c=17
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5231
@@ -2558,6 +2557,16 @@ msgstr "Firmware MK3 detecte sur imprimante MK3S"
 msgid "MK3S firmware detected on MK3 printer"
 msgstr "Firmware MK3S detecte sur imprimante MK3"
 
+#. MSG_TITLE_UNKNOWN_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:232
+msgid "UNKNOWN ERROR"
+msgstr "ERREUR INCONNUE"
+
+#. MSG_DESC_UNKNOWN_ERROR c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:335
+msgid "Unexpected error occurred."
+msgstr "Une erreur inattendue s'est produite."
+
 #~ msgid "XFLASH init"
 #~ msgstr "Init XFLASH"
 

lang/po/Firmware_hr.po

@@ -198,7 +198,7 @@ msgid "Brightness"
 msgstr "Svjetlina"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:178 ../../Firmware/mmu2/errors_list.h:224
 msgid "COMMUNICATION ERROR"
 msgstr "KOM. GRESKA"
 
@@ -252,13 +252,13 @@ msgid "Calibration done"
 msgstr "Kalibracija gotova"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:234 ../../Firmware/mmu2/errors_list.h:285
-#: ../../Firmware/mmu2/errors_list.h:287
+#: ../../Firmware/mmu2/errors_list.h:246 ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2/errors_list.h:303
 msgid "Can't move Selector or Idler."
 msgstr "Ne mogu pomaknuti Odabirac ili Klizac."
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:260 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:328
 msgid ""
 "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
@@ -416,7 +416,7 @@ msgid "Dim"
 msgstr "Tamno"
 
 #. MSG_BTN_DISABLE_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:334 ../../Firmware/mmu2/errors_list.h:344
+#: ../../Firmware/mmu2/errors_list.h:351 ../../Firmware/mmu2/errors_list.h:361
 msgid "Disable"
 msgstr "Onemogu."
 
@@ -454,7 +454,7 @@ msgstr ""
 "mlaznice i grijace podloge?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:330 ../../Firmware/mmu2/errors_list.h:340
+#: ../../Firmware/mmu2/errors_list.h:347 ../../Firmware/mmu2/errors_list.h:357
 msgid "Done"
 msgstr "Gotov"
 
@@ -555,18 +555,18 @@ msgstr "F. zastopan"
 msgid "F. runout"
 msgstr "F. isteko"
 
-#. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:169 ../../Firmware/mmu2/errors_list.h:214
-msgid "FILAMENT ALREADY LOA"
+#. MSG_TITLE_FILAMENT_ALREADY_LOADED c=20
+#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:225
+msgid "FIL. ALREADY LOADED"
 msgstr "FILAMENT VEC NAPUNJ."
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:135 ../../Firmware/mmu2/errors_list.h:178
+#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:189
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA SE NIJE AKT."
 
-#. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:277
+#. MSG_DESC_FINDA_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:293
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -575,7 +575,7 @@ msgstr ""
 "ručno. Provjerite može li se filament pomicati i FINDA radi."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:225 ../../Firmware/mmu2/errors_list.h:276
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:292
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -583,10 +583,10 @@ msgstr ""
 "FINDA se nije aktivirala tijekom punjenja filamenta. Provjerite može li se "
 "filament pomicati i FINDA radi."
 
-#. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:179
-msgid "FINDA: FILAM. STUCK"
-msgstr "FINDA: FILAM. ZAPEO"
+#. MSG_TITLE_FINDA_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:190
+msgid "FINDA FILAM. STUCK"
+msgstr "FINDA FILAM. ZAPEO"
 
 #. MSG_FS_ACTION c=10
 #: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:4048
@@ -595,22 +595,22 @@ msgid "FS Action"
 msgstr "FS Akcija"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:191
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSENZOR NIJE  AKTIV."
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:194
 msgid "FSENSOR TOO EARLY"
 msgstr "FSENZOR PRERANO"
 
-#. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:181
-msgid "FSENSOR: FIL. STUCK"
+#. MSG_TITLE_FSENSOR_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:192
+msgid "FSENSOR FIL. STUCK"
 msgstr "FSENZOR FIL. ZAPEO"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:218
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:229
 msgid "FW RUNTIME ERROR"
 msgstr "FW GRESKA IZVRSENJA"
 
@@ -709,8 +709,8 @@ msgstr "Fil. nije napunjen"
 msgid "Filament sensor"
 msgstr "Senzor filamenta"
 
-#. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:279
+#. MSG_DESC_FSENSOR_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:295
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -719,16 +719,16 @@ msgstr ""
 " se filament moze pomaknuti i da senzor radi"
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:278
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:294
 msgid ""
-"Filament sensor didn't trigger while loading the filament. Ensure the "
-"filament reached the fsensor and the sensor works."
+"Filament sensor didn't trigger while loading the filament. Ensure the sensor"
+" is calibrated and the filament reached it."
 msgstr ""
 "Senzor filamenta nije se aktivirao tijekom punjenja filamenta. Osigurajte da"
 " je filament dosegao fsenzor i da senzor radi."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:281
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:297
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -858,7 +858,7 @@ msgid "Heating"
 msgstr "Grijanje"
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9272
+#: ../../Firmware/Marlin_main.cpp:9274
 msgid "Heating disabled by safety timer."
 msgstr "Grijanje je onemoguceno sigurnosnim mjeracem vremena."
 
@@ -923,22 +923,22 @@ msgid "I will run z calibration now."
 msgstr "Sada cu pokrenuti z kalibraciju."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:199
 msgid "IDLER CANNOT HOME"
 msgstr "KLIZAC NIJE PODESEN"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:200
 msgid "IDLER CANNOT MOVE"
 msgstr "KLIZAC NIJE POMAKNUT"
 
 #. MSG_TITLE_INSPECT_FINDA c=20
-#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:195
 msgid "INSPECT FINDA"
 msgstr "PREGLED FINDA"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:215
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:226
 msgid "INVALID TOOL"
 msgstr "NEVALJAN ALAT"
 
@@ -980,7 +980,7 @@ msgstr ""
 "Umetnite filament (nemojte ga puniti) u ekstruder i zatim pritisnite gumb."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:278 ../../Firmware/mmu2/errors_list.h:332
 msgid ""
 "Internal runtime error. Try resetting the MMU or updating the firmware."
 msgstr ""
@@ -1101,12 +1101,12 @@ msgid "Loud"
 msgstr "Glasno"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:217
+#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:228
 msgid "MMU FW UPDATE NEEDED"
 msgstr "POTREBNO AZURIRANJE"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:262 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:277 ../../Firmware/mmu2/errors_list.h:330
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "Interna pogreska firmware MMU-a, resetirajte MMU."
 
@@ -1116,7 +1116,7 @@ msgid "MMU Mode"
 msgstr "MMU Mod"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:212
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:223
 msgid "MMU NOT RESPONDING"
 msgstr "MMU NE ODGOVARA"
 
@@ -1126,8 +1126,8 @@ msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU Ponovni pokusaj: Vracanje temperature..."
 
 #. MSG_TITLE_SELFTEST_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:165 ../../Firmware/mmu2/errors_list.h:208
-#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:220 ../../Firmware/mmu2/errors_list.h:221
 msgid "MMU SELFTEST FAILED"
 msgstr "MMU SELFTEST N USPIO"
 
@@ -1144,12 +1144,12 @@ msgid "MMU load fails"
 msgstr "Neusp. MMU punj"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:311
+#: ../../Firmware/mmu2/errors_list.h:274 ../../Firmware/mmu2/errors_list.h:327
 msgid "MMU not responding correctly. Check the wiring and connectors."
 msgstr "MMU ne reagira ispravno. Provjerite ozicenje i konektore."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:258 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:326
 msgid "MMU not responding. Check the wiring and connectors."
 msgstr "MMU ne reagira. Provjerite ozicenje i konektore."
 
@@ -1217,18 +1217,18 @@ msgid "Model"
 msgstr "Model"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:288
-#: ../../Firmware/mmu2/errors_list.h:289 ../../Firmware/mmu2/errors_list.h:290
-#: ../../Firmware/mmu2/errors_list.h:291 ../../Firmware/mmu2/errors_list.h:292
-#: ../../Firmware/mmu2/errors_list.h:293 ../../Firmware/mmu2/errors_list.h:294
-#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:296
-#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:298
-#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:300
-#: ../../Firmware/mmu2/errors_list.h:301 ../../Firmware/mmu2/errors_list.h:302
-#: ../../Firmware/mmu2/errors_list.h:303 ../../Firmware/mmu2/errors_list.h:304
+#: ../../Firmware/mmu2/errors_list.h:250 ../../Firmware/mmu2/errors_list.h:304
 #: ../../Firmware/mmu2/errors_list.h:305 ../../Firmware/mmu2/errors_list.h:306
 #: ../../Firmware/mmu2/errors_list.h:307 ../../Firmware/mmu2/errors_list.h:308
-#: ../../Firmware/mmu2/errors_list.h:309
+#: ../../Firmware/mmu2/errors_list.h:309 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:311 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:313 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:315 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:317 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:319 ../../Firmware/mmu2/errors_list.h:320
+#: ../../Firmware/mmu2/errors_list.h:321 ../../Firmware/mmu2/errors_list.h:322
+#: ../../Firmware/mmu2/errors_list.h:323 ../../Firmware/mmu2/errors_list.h:324
+#: ../../Firmware/mmu2/errors_list.h:325
 msgid "More details online."
 msgstr "Vise detalja online."
 
@@ -1400,7 +1400,7 @@ msgid "Once"
 msgstr "Jednom"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9451 ../../Firmware/messages.cpp:175
+#: ../../Firmware/Marlin_main.cpp:9453 ../../Firmware/messages.cpp:175
 msgid "PAUSED THERMAL ERROR"
 msgstr "PAUZIRAN TERMAL EROR"
 
@@ -1447,7 +1447,7 @@ msgstr ""
 "Postavke->PINDA. kal."
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:193
 msgid "PULLEY CANNOT MOVE"
 msgstr "REMENICA SE NE MICE"
 
@@ -1543,7 +1543,7 @@ msgid "Please place steel sheet on heatbed."
 msgstr "Stavite celicnu plocu na grijacu podlogu."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11208 ../../Firmware/Marlin_main.cpp:11238
+#: ../../Firmware/Marlin_main.cpp:11210 ../../Firmware/Marlin_main.cpp:11240
 #: ../../Firmware/messages.cpp:79
 msgid "Please press the knob to unload filament"
 msgstr "Pritisnite gumb za praznjenje filamenta"
@@ -1640,7 +1640,7 @@ msgid "Press the knob"
 msgstr "Pritisnite gumb"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11220
+#: ../../Firmware/Marlin_main.cpp:11222
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Pritisnite gumb za predgrijavanje mlaznice i nastavite."
 
@@ -1698,8 +1698,8 @@ msgstr ""
 "Promjer mlaznice printera razlikuje se od G-koda. Molimo provjerite "
 "vrijednost u postavkama. Print je otkazan."
 
-#. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:280
+#. MSG_DESC_PULLEY_CANNOT_MOVE c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:296
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 "Motor remenice zastao. Provjerite moze li se remenica pomicati i provjerite "
@@ -1712,7 +1712,7 @@ msgid "Pushing filament"
 msgstr "Guranje filamenta"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:171 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:181 ../../Firmware/mmu2/errors_list.h:227
 msgid "QUEUE FULL"
 msgstr "RED PUN"
 
@@ -1727,7 +1727,7 @@ msgid "Rear side [µm]"
 msgstr "Zad. str.[µm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10598
+#: ../../Firmware/Marlin_main.cpp:10600
 msgid "Recovering print"
 msgstr "Oporavak printa"
 
@@ -1742,7 +1742,7 @@ msgid "Rename"
 msgstr "Preimenuj"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:313
+#: ../../Firmware/mmu2/errors_list.h:276 ../../Firmware/mmu2/errors_list.h:329
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1779,7 +1779,7 @@ msgid "Retract from FINDA"
 msgstr "Izvuci iz FINDA"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:329 ../../Firmware/mmu2/errors_list.h:339
+#: ../../Firmware/mmu2/errors_list.h:346 ../../Firmware/mmu2/errors_list.h:356
 msgid "Retry"
 msgstr "Retry"
 
@@ -1815,17 +1815,17 @@ msgid "SD card"
 msgstr "SD karti"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:197
 msgid "SELECTOR CANNOT HOME"
 msgstr "IZBORNIK NE PODESEN"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:198
 msgid "SELECTOR CANNOT MOVE"
 msgstr "IZBORNIK SE NE MICE"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9477 ../../Firmware/messages.cpp:114
+#: ../../Firmware/Marlin_main.cpp:9479 ../../Firmware/messages.cpp:114
 msgid "STOPPED."
 msgstr "ZAUSTAVLJENO."
 
@@ -2044,7 +2044,7 @@ msgid "Steel sheets"
 msgstr "Celicna ploca"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:333 ../../Firmware/mmu2/errors_list.h:343
+#: ../../Firmware/mmu2/errors_list.h:350 ../../Firmware/mmu2/errors_list.h:360
 msgid "Stop"
 msgstr "Stop"
 
@@ -2071,37 +2071,37 @@ msgid "Swapped"
 msgstr "Zamjenjeno"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2233
+#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2236
 msgid "THERMAL ANOMALY"
 msgstr "TERMALNA ANOMALIJA"
 
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:196
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:198
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:209
 msgid "TMC DRIVER ERROR"
 msgstr "TMC GRESKA DRAJVERA"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:199
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:212
 msgid "TMC DRIVER RESET"
 msgstr "TMC RESET DRAJVERA"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:162 ../../Firmware/mmu2/errors_list.h:205
-#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:218
 msgid "TMC DRIVER SHORTED"
 msgstr "TMC DRAJVER SKRACEN"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:193
-#: ../../Firmware/mmu2/errors_list.h:194 ../../Firmware/mmu2/errors_list.h:195
+#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:206
 msgid "TMC OVERHEAT ERROR"
 msgstr "TMC GRESKA PREGRIJAN"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:202
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:164 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:214 ../../Firmware/mmu2/errors_list.h:215
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "TMC NISKA VOLTAZA"
 
@@ -2135,7 +2135,7 @@ msgid "Testing filament"
 msgstr "Testiram filament"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:286
+#: ../../Firmware/mmu2/errors_list.h:248 ../../Firmware/mmu2/errors_list.h:302
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2143,7 +2143,7 @@ msgstr ""
 "njegovo kretanje."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:284
+#: ../../Firmware/mmu2/errors_list.h:245 ../../Firmware/mmu2/errors_list.h:300
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2207,12 +2207,12 @@ msgid "Tune"
 msgstr "Ugodi"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:184 ../../Firmware/mmu2/errors_list.h:230
 msgid "UNLOAD MANUALLY"
 msgstr "ISPRAZNI RUCNO"
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:332 ../../Firmware/mmu2/errors_list.h:342
+#: ../../Firmware/mmu2/errors_list.h:349 ../../Firmware/mmu2/errors_list.h:359
 msgid "Unload"
 msgstr "Prazni"
 
@@ -2252,8 +2252,8 @@ msgid "Voltages"
 msgstr "Voltaza"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:190
-#: ../../Firmware/mmu2/errors_list.h:191 ../../Firmware/mmu2/errors_list.h:192
+#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:203
 msgid "WARNING TMC TOO HOT"
 msgstr "UPOZORENJE TMC VRUC"
 
@@ -2458,12 +2458,12 @@ msgid "MMU power fails"
 msgstr "Neusp. MMU nap"
 
 #. MSG_TITLE_FILAMENT_EJECTED c=20
-#: ../../Firmware/mmu2/errors_list.h:175 ../../Firmware/mmu2/errors_list.h:220
+#: ../../Firmware/mmu2/errors_list.h:185 ../../Firmware/mmu2/errors_list.h:231
 msgid "FILAMENT EJECTED"
 msgstr "FILAMENT IZBAČEN"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:264 ../../Firmware/mmu2/errors_list.h:317
+#: ../../Firmware/mmu2/errors_list.h:279 ../../Firmware/mmu2/errors_list.h:333
 msgid ""
 "Filament detected unexpectedly. Ensure no filament is loaded. Check the "
 "sensors and wiring."
@@ -2472,12 +2472,12 @@ msgstr ""
 " senzore i ožičenje."
 
 #. MSG_TITLE_LOAD_TO_EXTRUDER_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:196
 msgid "LOAD TO EXTR. FAILED"
 msgstr "NEUSPJEH PUNI EXTR."
 
 #. MSG_DESC_LOAD_TO_EXTRUDER_FAILED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:283
+#: ../../Firmware/mmu2/errors_list.h:244 ../../Firmware/mmu2/errors_list.h:299
 msgid ""
 "Loading to extruder failed. Inspect the filament tip shape. Refine the "
 "sensor calibration, if needed."
@@ -2485,10 +2485,10 @@ msgstr ""
 "Učitavanje u ekstruder nije uspjelo. Provjerite oblik vrha žarne niti. "
 "Poboljšajte kalibraciju senzora, ako je potrebno."
 
-#. MSG_TITLE_MCU_UNDERVOLTAGE_VCC c=20
-#: ../../Firmware/mmu2/errors_list.h:166 ../../Firmware/mmu2/errors_list.h:211
-msgid "MCU UNDERVOLTAGE VCC"
-msgstr "MCU PODNAPON VCC"
+#. MSG_TITLE_MCU_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:222
+msgid "MMU MCU ERROR"
+msgstr "MMU MCU GRESKA"
 
 #. MSG_MATERIAL_CHANGES c=18
 #: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:1095
@@ -2497,32 +2497,31 @@ msgid "Material changes"
 msgstr "Materijal razmjene"
 
 #. MSG_DESC_FILAMENT_EJECTED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:280 ../../Firmware/mmu2/errors_list.h:334
 msgid "Remove the ejected filament from the front of the MMU."
 msgstr "Uklonite izbačenu nit s prednje strane MMU."
 
-#. MSG_BTN_RESTART_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:331 ../../Firmware/mmu2/errors_list.h:341
-msgid "RstMMU"
-msgstr "RstMMU"
+#. MSG_BTN_RESET_MMU c=8
+#: ../../Firmware/mmu2/errors_list.h:348 ../../Firmware/mmu2/errors_list.h:358
+msgid "ResetMMU"
+msgstr "ResetMMU"
 
 #. MSG_DESC_INSPECT_FINDA c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:282
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:298
 msgid ""
 "Selector can't move due to FINDA detecting a filament. Make sure no filament"
-" is in selector and FINDA works properly."
+" is in Selector and FINDA works properly."
 msgstr ""
 "Selektor se ne može pomaknuti jer FINDA otkriva nit. Uvjerite se da niti "
 "jedna nit nije u selektoru i da FINDA radi ispravno."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:268 ../../Firmware/mmu2/errors_list.h:315
+#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:331
 msgid ""
-"The MMU firmware version incompatible with the printer's FW. Update to "
-"version 2.1.9."
+"MMU FW version is incompatible with printer FW.Update to version 3.0.0."
 msgstr ""
 "Verzija firmware-a MMU nekompatibilna s FW-om pisača. Ažuriranje na verziju "
-"2.1.9."
+"3.0.0."
 
 #. MSG_PRELOAD_TO_MMU c=17
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5231
@@ -2537,6 +2536,16 @@ msgstr "MK3 firmware otkriven na MK3S printeru"
 msgid "MK3S firmware detected on MK3 printer"
 msgstr "MK3S firmware detektiran na MK3 printeru"
 
+#. MSG_TITLE_UNKNOWN_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:232
+msgid "UNKNOWN ERROR"
+msgstr "NEPOZNATA POGREŠKA"
+
+#. MSG_DESC_UNKNOWN_ERROR c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:335
+msgid "Unexpected error occurred."
+msgstr "Došlo je do neočekivane pogreške."
+
 #~ msgid "XFLASH init"
 #~ msgstr "XFLASH  validacija"
 

lang/po/Firmware_hu.po

@@ -198,7 +198,7 @@ msgid "Brightness"
 msgstr "Fenyero"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:178 ../../Firmware/mmu2/errors_list.h:224
 msgid "COMMUNICATION ERROR"
 msgstr "KOMUNIKACIOS HIBA"
 
@@ -252,13 +252,13 @@ msgid "Calibration done"
 msgstr "Kalibracio kesz"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:234 ../../Firmware/mmu2/errors_list.h:285
-#: ../../Firmware/mmu2/errors_list.h:287
+#: ../../Firmware/mmu2/errors_list.h:246 ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2/errors_list.h:303
 msgid "Can't move Selector or Idler."
 msgstr "Nem tudom mozgatni a Fejet vagy a Gorgot"
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:260 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:328
 msgid ""
 "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
@@ -419,7 +419,7 @@ msgid "Dim"
 msgstr "Sotet"
 
 #. MSG_BTN_DISABLE_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:334 ../../Firmware/mmu2/errors_list.h:344
+#: ../../Firmware/mmu2/errors_list.h:351 ../../Firmware/mmu2/errors_list.h:361
 msgid "Disable"
 msgstr "Letilt"
 
@@ -457,7 +457,7 @@ msgstr ""
 "asztal kozotti tavolsagot?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:330 ../../Firmware/mmu2/errors_list.h:340
+#: ../../Firmware/mmu2/errors_list.h:347 ../../Firmware/mmu2/errors_list.h:357
 msgid "Done"
 msgstr "Kesz"
 
@@ -558,18 +558,18 @@ msgstr "Dugul. eszlel"
 msgid "F. runout"
 msgstr "F. fogyas"
 
-#. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:169 ../../Firmware/mmu2/errors_list.h:214
-msgid "FILAMENT ALREADY LOA"
+#. MSG_TITLE_FILAMENT_ALREADY_LOADED c=20
+#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:225
+msgid "FIL. ALREADY LOADED"
 msgstr "FILAMENT MAR BENT"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:135 ../../Firmware/mmu2/errors_list.h:178
+#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:189
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA NEM KAPCSOLT"
 
-#. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:277
+#. MSG_DESC_FINDA_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:293
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -578,7 +578,7 @@ msgstr ""
 "fil. utjat es a FINDA mukodeset."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:225 ../../Firmware/mmu2/errors_list.h:276
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:292
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -586,10 +586,10 @@ msgstr ""
 "A FINDA nem kapcsolt filament betoltese kozben. Ellenorizd a fil. utjat es a"
 " FINDA mukodeset."
 
-#. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:179
-msgid "FINDA: FILAM. STUCK"
-msgstr "FINDA: FIL. SZORULT"
+#. MSG_TITLE_FINDA_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:190
+msgid "FINDA FILAM. STUCK"
+msgstr "FINDA FIL. SZORULT"
 
 #. MSG_FS_ACTION c=10
 #: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:4048
@@ -598,22 +598,22 @@ msgid "FS Action"
 msgstr "FSz akcio"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:191
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSZENZOR NEM KAPCSOL"
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:194
 msgid "FSENSOR TOO EARLY"
 msgstr "FSZENZ. TUL HAMAR"
 
-#. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:181
-msgid "FSENSOR: FIL. STUCK"
+#. MSG_TITLE_FSENSOR_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:192
+msgid "FSENSOR FIL. STUCK"
 msgstr "FSZENZOR: F SZORULT"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:218
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:229
 msgid "FW RUNTIME ERROR"
 msgstr "FW FUTAS HIBA"
 
@@ -712,8 +712,8 @@ msgstr "Fil. nincs betoltve"
 msgid "Filament sensor"
 msgstr "Filament szenzor"
 
-#. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:279
+#. MSG_DESC_FSENSOR_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:295
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -722,16 +722,16 @@ msgstr ""
 "filament utjat es a szenort."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:278
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:294
 msgid ""
-"Filament sensor didn't trigger while loading the filament. Ensure the "
-"filament reached the fsensor and the sensor works."
+"Filament sensor didn't trigger while loading the filament. Ensure the sensor"
+" is calibrated and the filament reached it."
 msgstr ""
 "A filament szenzor nem kapcsolt be a filament betoltese kozben. Ellenorizd a"
 " filament utjat es a szenort."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:281
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:297
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -861,7 +861,7 @@ msgid "Heating"
 msgstr "Futes folyamatban"
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9272
+#: ../../Firmware/Marlin_main.cpp:9274
 msgid "Heating disabled by safety timer."
 msgstr "A bizonsagi idozito leallitotta a futest"
 
@@ -925,22 +925,22 @@ msgid "I will run z calibration now."
 msgstr "Lefuttatom a Z kalibraciot."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:199
 msgid "IDLER CANNOT HOME"
 msgstr "GORGO NEM MOZOG"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:200
 msgid "IDLER CANNOT MOVE"
 msgstr "GORGO NEM MOZOG"
 
 #. MSG_TITLE_INSPECT_FINDA c=20
-#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:195
 msgid "INSPECT FINDA"
 msgstr "ELLENŐRIZZE A FINDA"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:215
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:226
 msgid "INVALID TOOL"
 msgstr "HELYTELEN SZERSZAM"
 
@@ -983,7 +983,7 @@ msgstr ""
 "gombot."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:278 ../../Firmware/mmu2/errors_list.h:332
 msgid ""
 "Internal runtime error. Try resetting the MMU or updating the firmware."
 msgstr "Futas kozbeni hiba. Inditsd ujra az MMU-t vagy frissitsd a firmwaret."
@@ -1102,12 +1102,12 @@ msgid "Loud"
 msgstr "Hangos"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:217
+#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:228
 msgid "MMU FW UPDATE NEEDED"
 msgstr "MMU FW FRISSIT. KELL"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:262 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:277 ../../Firmware/mmu2/errors_list.h:330
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "MMU Firmware hiba, kerlek inditsd ujra az MMU-t"
 
@@ -1117,7 +1117,7 @@ msgid "MMU Mode"
 msgstr "MMU Mod"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:212
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:223
 msgid "MMU NOT RESPONDING"
 msgstr "MMU NEM VALASZOL"
 
@@ -1127,8 +1127,8 @@ msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU Ujra: Homerseklet visszaallitasa"
 
 #. MSG_TITLE_SELFTEST_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:165 ../../Firmware/mmu2/errors_list.h:208
-#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:220 ../../Firmware/mmu2/errors_list.h:221
 msgid "MMU SELFTEST FAILED"
 msgstr "MMU SELFTEST HIBA"
 
@@ -1145,13 +1145,13 @@ msgid "MMU load fails"
 msgstr "MMU bet. hibak"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:311
+#: ../../Firmware/mmu2/errors_list.h:274 ../../Firmware/mmu2/errors_list.h:327
 msgid "MMU not responding correctly. Check the wiring and connectors."
 msgstr ""
 "Az MMU helytelenul valaszol. Nezd meg a kabelezest es a konnektorokat."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:258 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:326
 msgid "MMU not responding. Check the wiring and connectors."
 msgstr "Az MMU nem valaszol. Nezd meg a kabelezest es a konnektorokat."
 
@@ -1219,18 +1219,18 @@ msgid "Model"
 msgstr "Modell"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:288
-#: ../../Firmware/mmu2/errors_list.h:289 ../../Firmware/mmu2/errors_list.h:290
-#: ../../Firmware/mmu2/errors_list.h:291 ../../Firmware/mmu2/errors_list.h:292
-#: ../../Firmware/mmu2/errors_list.h:293 ../../Firmware/mmu2/errors_list.h:294
-#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:296
-#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:298
-#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:300
-#: ../../Firmware/mmu2/errors_list.h:301 ../../Firmware/mmu2/errors_list.h:302
-#: ../../Firmware/mmu2/errors_list.h:303 ../../Firmware/mmu2/errors_list.h:304
+#: ../../Firmware/mmu2/errors_list.h:250 ../../Firmware/mmu2/errors_list.h:304
 #: ../../Firmware/mmu2/errors_list.h:305 ../../Firmware/mmu2/errors_list.h:306
 #: ../../Firmware/mmu2/errors_list.h:307 ../../Firmware/mmu2/errors_list.h:308
-#: ../../Firmware/mmu2/errors_list.h:309
+#: ../../Firmware/mmu2/errors_list.h:309 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:311 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:313 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:315 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:317 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:319 ../../Firmware/mmu2/errors_list.h:320
+#: ../../Firmware/mmu2/errors_list.h:321 ../../Firmware/mmu2/errors_list.h:322
+#: ../../Firmware/mmu2/errors_list.h:323 ../../Firmware/mmu2/errors_list.h:324
+#: ../../Firmware/mmu2/errors_list.h:325
 msgid "More details online."
 msgstr "Tovabbi reszletek a neten."
 
@@ -1402,7 +1402,7 @@ msgid "Once"
 msgstr "Egyszer"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9451 ../../Firmware/messages.cpp:175
+#: ../../Firmware/Marlin_main.cpp:9453 ../../Firmware/messages.cpp:175
 msgid "PAUSED THERMAL ERROR"
 msgstr "SZUNET HOMERSEK.HIBA"
 
@@ -1447,7 +1447,7 @@ msgid ""
 msgstr "PINDA kalibracio sikeres es aktiv. A Beallitasok ->PINDA kal."
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:193
 msgid "PULLEY CANNOT MOVE"
 msgstr "GORGO NEM MOZOG"
 
@@ -1549,7 +1549,7 @@ msgid "Please place steel sheet on heatbed."
 msgstr "Kerlek, helyzed az acellapot a targyasztalra."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11208 ../../Firmware/Marlin_main.cpp:11238
+#: ../../Firmware/Marlin_main.cpp:11210 ../../Firmware/Marlin_main.cpp:11240
 #: ../../Firmware/messages.cpp:79
 msgid "Please press the knob to unload filament"
 msgstr "Kerlek, nyomd meg a gombot a filament kiadasahoz"
@@ -1646,7 +1646,7 @@ msgid "Press the knob"
 msgstr "Nyomd meg a gombot"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11220
+#: ../../Firmware/Marlin_main.cpp:11222
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Nyomd meg a gombot a folytatashoz es a fuvoka felfutesehez."
 
@@ -1704,8 +1704,8 @@ msgstr ""
 "A nyomtato fuvoka atmeroje elter a G-kodtol. Ellenorizd az erteket a "
 "beallitasokban. Nyomtatas megallitva."
 
-#. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:280
+#. MSG_DESC_PULLEY_CANNOT_MOVE c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:296
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr "Gorgo motor nem mozog. Ellenorizd hogy tud-e mozogni es a kabelezest."
 
@@ -1716,7 +1716,7 @@ msgid "Pushing filament"
 msgstr "Filament benyomasa"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:171 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:181 ../../Firmware/mmu2/errors_list.h:227
 msgid "QUEUE FULL"
 msgstr "SOR TELE"
 
@@ -1731,7 +1731,7 @@ msgid "Rear side [µm]"
 msgstr "Hatso old.[µm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10598
+#: ../../Firmware/Marlin_main.cpp:10600
 msgid "Recovering print"
 msgstr "Nyomt. visszaallit"
 
@@ -1746,7 +1746,7 @@ msgid "Rename"
 msgstr "Atnevezes"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:313
+#: ../../Firmware/mmu2/errors_list.h:276 ../../Firmware/mmu2/errors_list.h:329
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1783,7 +1783,7 @@ msgid "Retract from FINDA"
 msgstr "FINDAtol visszahuz"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:329 ../../Firmware/mmu2/errors_list.h:339
+#: ../../Firmware/mmu2/errors_list.h:346 ../../Firmware/mmu2/errors_list.h:356
 msgid "Retry"
 msgstr "Ujra"
 
@@ -1819,17 +1819,17 @@ msgid "SD card"
 msgstr "SDkartya"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:197
 msgid "SELECTOR CANNOT HOME"
 msgstr "SZELEKTOR NEM HOMEOL"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:198
 msgid "SELECTOR CANNOT MOVE"
 msgstr "SZELEKTOR NEM MOZOG"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9477 ../../Firmware/messages.cpp:114
+#: ../../Firmware/Marlin_main.cpp:9479 ../../Firmware/messages.cpp:114
 msgid "STOPPED."
 msgstr "MEGALLITVA."
 
@@ -2043,7 +2043,7 @@ msgid "Steel sheets"
 msgstr "Acellapok"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:333 ../../Firmware/mmu2/errors_list.h:343
+#: ../../Firmware/mmu2/errors_list.h:350 ../../Firmware/mmu2/errors_list.h:360
 msgid "Stop"
 msgstr "Allj"
 
@@ -2070,37 +2070,37 @@ msgid "Swapped"
 msgstr "Felcserelve"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2233
+#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2236
 msgid "THERMAL ANOMALY"
 msgstr "Homersekl. anomalia"
 
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:196
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:198
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:209
 msgid "TMC DRIVER ERROR"
 msgstr "TMC DRIVER HIBA"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:199
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:212
 msgid "TMC DRIVER RESET"
 msgstr "TMC DRIVER RESZET"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:162 ../../Firmware/mmu2/errors_list.h:205
-#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:218
 msgid "TMC DRIVER SHORTED"
 msgstr "TMC DRIVER ZARLAT"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:193
-#: ../../Firmware/mmu2/errors_list.h:194 ../../Firmware/mmu2/errors_list.h:195
+#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:206
 msgid "TMC OVERHEAT ERROR"
 msgstr "TMC TULHEVULES HIBA"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:202
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:164 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:214 ../../Firmware/mmu2/errors_list.h:215
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "TMC ALACSONY FESZ."
 
@@ -2134,7 +2134,7 @@ msgid "Testing filament"
 msgstr "Filament tesztelese"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:286
+#: ../../Firmware/mmu2/errors_list.h:248 ../../Firmware/mmu2/errors_list.h:302
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2142,7 +2142,7 @@ msgstr ""
 "mozgasat."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:284
+#: ../../Firmware/mmu2/errors_list.h:245 ../../Firmware/mmu2/errors_list.h:300
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2207,12 +2207,12 @@ msgid "Tune"
 msgstr "Finomhangolas"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:184 ../../Firmware/mmu2/errors_list.h:230
 msgid "UNLOAD MANUALLY"
 msgstr "VEDD KI KEZZEL"
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:332 ../../Firmware/mmu2/errors_list.h:342
+#: ../../Firmware/mmu2/errors_list.h:349 ../../Firmware/mmu2/errors_list.h:359
 msgid "Unload"
 msgstr "Kiadas"
 
@@ -2252,8 +2252,8 @@ msgid "Voltages"
 msgstr "Feszultsegek"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:190
-#: ../../Firmware/mmu2/errors_list.h:191 ../../Firmware/mmu2/errors_list.h:192
+#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:203
 msgid "WARNING TMC TOO HOT"
 msgstr "FIGYELEM A TMC FORRO"
 
@@ -2462,12 +2462,12 @@ msgid "MMU power fails"
 msgstr "MMU tap hibak"
 
 #. MSG_TITLE_FILAMENT_EJECTED c=20
-#: ../../Firmware/mmu2/errors_list.h:175 ../../Firmware/mmu2/errors_list.h:220
+#: ../../Firmware/mmu2/errors_list.h:185 ../../Firmware/mmu2/errors_list.h:231
 msgid "FILAMENT EJECTED"
 msgstr "FILAMENT KIADVA"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:264 ../../Firmware/mmu2/errors_list.h:317
+#: ../../Firmware/mmu2/errors_list.h:279 ../../Firmware/mmu2/errors_list.h:333
 msgid ""
 "Filament detected unexpectedly. Ensure no filament is loaded. Check the "
 "sensors and wiring."
@@ -2476,12 +2476,12 @@ msgstr ""
 "betöltve. Ellenőrizze az érzékelőket és a vezetékeket."
 
 #. MSG_TITLE_LOAD_TO_EXTRUDER_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:196
 msgid "LOAD TO EXTR. FAILED"
 msgstr "BETÖLTÉS SIKERTELEN"
 
 #. MSG_DESC_LOAD_TO_EXTRUDER_FAILED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:283
+#: ../../Firmware/mmu2/errors_list.h:244 ../../Firmware/mmu2/errors_list.h:299
 msgid ""
 "Loading to extruder failed. Inspect the filament tip shape. Refine the "
 "sensor calibration, if needed."
@@ -2489,10 +2489,10 @@ msgstr ""
 "Az extruderbe való betöltés nem sikerült. Ellenőrizze az fil. hegyének "
 "alakját. Ha szükséges, finomítsd az érzékelő kalibrálását."
 
-#. MSG_TITLE_MCU_UNDERVOLTAGE_VCC c=20
-#: ../../Firmware/mmu2/errors_list.h:166 ../../Firmware/mmu2/errors_list.h:211
-msgid "MCU UNDERVOLTAGE VCC"
-msgstr "MCU VCC ALACSONY"
+#. MSG_TITLE_MCU_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:222
+msgid "MMU MCU ERROR"
+msgstr "MMU MCU HIBA"
 
 #. MSG_MATERIAL_CHANGES c=18
 #: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:1095
@@ -2501,32 +2501,31 @@ msgid "Material changes"
 msgstr "Anyagcserék"
 
 #. MSG_DESC_FILAMENT_EJECTED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:280 ../../Firmware/mmu2/errors_list.h:334
 msgid "Remove the ejected filament from the front of the MMU."
 msgstr "Távolítsd el a kiadott filamentet az MMU-ból."
 
-#. MSG_BTN_RESTART_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:331 ../../Firmware/mmu2/errors_list.h:341
-msgid "RstMMU"
-msgstr "RstMMU"
+#. MSG_BTN_RESET_MMU c=8
+#: ../../Firmware/mmu2/errors_list.h:348 ../../Firmware/mmu2/errors_list.h:358
+msgid "ResetMMU"
+msgstr "ResetMMU"
 
 #. MSG_DESC_INSPECT_FINDA c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:282
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:298
 msgid ""
 "Selector can't move due to FINDA detecting a filament. Make sure no filament"
-" is in selector and FINDA works properly."
+" is in Selector and FINDA works properly."
 msgstr ""
 "A szelektor nem tud mozogni, mert a FINDA filamentet észlelt. Győződj meg "
 "arról,hogy nincs fil. a szelektorban, és a FINDA megfelelően működik."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:268 ../../Firmware/mmu2/errors_list.h:315
+#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:331
 msgid ""
-"The MMU firmware version incompatible with the printer's FW. Update to "
-"version 2.1.9."
+"MMU FW version is incompatible with printer FW.Update to version 3.0.0."
 msgstr ""
 "Az MMU firmware-verziója nem kompatibilis a nyomtató FW-vel. Frissíts a "
-"2.1.9-es verzióra."
+"3.0.0-es verzióra."
 
 #. MSG_PRELOAD_TO_MMU c=17
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5231
@@ -2541,6 +2540,16 @@ msgstr "MK3 firmver telepitve MK3S nyomtatora"
 msgid "MK3S firmware detected on MK3 printer"
 msgstr "MK3S firmver eszlelve MK3 nyomtaton"
 
+#. MSG_TITLE_UNKNOWN_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:232
+msgid "UNKNOWN ERROR"
+msgstr "ISMERETLEN HIBA"
+
+#. MSG_DESC_UNKNOWN_ERROR c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:335
+msgid "Unexpected error occurred."
+msgstr "Váratlan hiba történt."
+
 #~ msgid "XFLASH init"
 #~ msgstr "XFLASH inicializal"
 

lang/po/Firmware_it.po

@@ -199,7 +199,7 @@ msgid "Brightness"
 msgstr "Luminosita'"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:178 ../../Firmware/mmu2/errors_list.h:224
 msgid "COMMUNICATION ERROR"
 msgstr "ERRORE COMUNICAZIONE"
 
@@ -253,13 +253,13 @@ msgid "Calibration done"
 msgstr "Calibr. completa"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:234 ../../Firmware/mmu2/errors_list.h:285
-#: ../../Firmware/mmu2/errors_list.h:287
+#: ../../Firmware/mmu2/errors_list.h:246 ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2/errors_list.h:303
 msgid "Can't move Selector or Idler."
 msgstr "Impossibile spostare il Selettore o l'Idler"
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:260 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:328
 msgid ""
 "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
@@ -421,7 +421,7 @@ msgid "Dim"
 msgstr "Scuro"
 
 #. MSG_BTN_DISABLE_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:334 ../../Firmware/mmu2/errors_list.h:344
+#: ../../Firmware/mmu2/errors_list.h:351 ../../Firmware/mmu2/errors_list.h:361
 msgid "Disable"
 msgstr "Disatt."
 
@@ -458,7 +458,7 @@ msgstr ""
 " piatto?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:330 ../../Firmware/mmu2/errors_list.h:340
+#: ../../Firmware/mmu2/errors_list.h:347 ../../Firmware/mmu2/errors_list.h:357
 msgid "Done"
 msgstr "Fatto"
 
@@ -559,18 +559,18 @@ msgstr "Ril. blocco"
 msgid "F. runout"
 msgstr "Ril. fine fil"
 
-#. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:169 ../../Firmware/mmu2/errors_list.h:214
-msgid "FILAMENT ALREADY LOA"
+#. MSG_TITLE_FILAMENT_ALREADY_LOADED c=20
+#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:225
+msgid "FIL. ALREADY LOADED"
 msgstr "FILAM GIA CARICATO"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:135 ../../Firmware/mmu2/errors_list.h:178
+#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:189
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA NON ATTIVATA"
 
-#. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:277
+#. MSG_DESC_FINDA_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:293
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -579,7 +579,7 @@ msgstr ""
 " che il fil. possa muoversi e che FINDA funzioni."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:225 ../../Firmware/mmu2/errors_list.h:276
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:292
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -587,10 +587,10 @@ msgstr ""
 "FINDA non attivata durante il caric. del filamento. Verif che il fil. possa "
 "muoversi e che FINDA funzioni."
 
-#. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:179
-msgid "FINDA: FILAM. STUCK"
-msgstr "FINDA: FILAM. BLOCC"
+#. MSG_TITLE_FINDA_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:190
+msgid "FINDA FILAM. STUCK"
+msgstr "FINDA FILAM. BLOCC"
 
 #. MSG_FS_ACTION c=10
 #: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:4048
@@ -599,22 +599,22 @@ msgid "FS Action"
 msgstr "Azione FS"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:191
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSENSOR NON ATTIVATO"
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:194
 msgid "FSENSOR TOO EARLY"
 msgstr "FSENSOR IN ANTICIPO"
 
-#. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:181
-msgid "FSENSOR: FIL. STUCK"
-msgstr "FSENSOR: FIL. BLOCC"
+#. MSG_TITLE_FSENSOR_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:192
+msgid "FSENSOR FIL. STUCK"
+msgstr "FSENSOR FIL. BLOCC"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:218
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:229
 msgid "FW RUNTIME ERROR"
 msgstr "FW RUNTIME ERROR"
 
@@ -713,8 +713,8 @@ msgstr "Fil. non caricato"
 msgid "Filament sensor"
 msgstr "Sensore filam."
 
-#. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:279
+#. MSG_DESC_FSENSOR_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:295
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -723,16 +723,16 @@ msgstr ""
 "possa muoversi e che il sensore funzioni."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:278
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:294
 msgid ""
-"Filament sensor didn't trigger while loading the filament. Ensure the "
-"filament reached the fsensor and the sensor works."
+"Filament sensor didn't trigger while loading the filament. Ensure the sensor"
+" is calibrated and the filament reached it."
 msgstr ""
 "Sensore del fila-mento non attivato durante il caric. filamento. Verif che "
 "il filamento abbia raggiunto il sensore e che il sensore funzioni."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:281
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:297
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -863,7 +863,7 @@ msgid "Heating"
 msgstr "Riscaldamento..."
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9272
+#: ../../Firmware/Marlin_main.cpp:9274
 msgid "Heating disabled by safety timer."
 msgstr "Riscaldamento fermato dal timer di sicurezza."
 
@@ -927,22 +927,22 @@ msgid "I will run z calibration now."
 msgstr "Adesso avviero la Calibrazione Z."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:199
 msgid "IDLER CANNOT HOME"
 msgstr "IDLER ERR. MOVIMENTO"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:200
 msgid "IDLER CANNOT MOVE"
 msgstr "IDLER BLOCCATO"
 
 #. MSG_TITLE_INSPECT_FINDA c=20
-#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:195
 msgid "INSPECT FINDA"
 msgstr "ISPEZIONA FINDA"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:215
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:226
 msgid "INVALID TOOL"
 msgstr "STRUM NON VAL"
 
@@ -984,7 +984,7 @@ msgstr ""
 "Inserire filamento (senza caricarlo) nell'estrusore e premere la manopola."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:278 ../../Firmware/mmu2/errors_list.h:332
 msgid ""
 "Internal runtime error. Try resetting the MMU or updating the firmware."
 msgstr ""
@@ -1104,12 +1104,12 @@ msgid "Loud"
 msgstr "Forte"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:217
+#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:228
 msgid "MMU FW UPDATE NEEDED"
 msgstr "AGG FW MMU NECESSARI"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:262 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:277 ../../Firmware/mmu2/errors_list.h:330
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "Errore interno FW MMU, resettare la MMU."
 
@@ -1119,7 +1119,7 @@ msgid "MMU Mode"
 msgstr "Mod. MMU"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:212
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:223
 msgid "MMU NOT RESPONDING"
 msgstr "MMU NON RISPONDE"
 
@@ -1129,8 +1129,8 @@ msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU Riprova. Ripristino temperatura..."
 
 #. MSG_TITLE_SELFTEST_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:165 ../../Firmware/mmu2/errors_list.h:208
-#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:220 ../../Firmware/mmu2/errors_list.h:221
 msgid "MMU SELFTEST FAILED"
 msgstr "MMU AUTOTEST FALLITO"
 
@@ -1147,12 +1147,12 @@ msgid "MMU load fails"
 msgstr "Car MMU falliti"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:311
+#: ../../Firmware/mmu2/errors_list.h:274 ../../Firmware/mmu2/errors_list.h:327
 msgid "MMU not responding correctly. Check the wiring and connectors."
 msgstr "MMU non risponde correttamente. Controlla cavi e connettori."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:258 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:326
 msgid "MMU not responding. Check the wiring and connectors."
 msgstr "MMU non risponde. Controlla cavi e connettori."
 
@@ -1220,18 +1220,18 @@ msgid "Model"
 msgstr "Modello"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:288
-#: ../../Firmware/mmu2/errors_list.h:289 ../../Firmware/mmu2/errors_list.h:290
-#: ../../Firmware/mmu2/errors_list.h:291 ../../Firmware/mmu2/errors_list.h:292
-#: ../../Firmware/mmu2/errors_list.h:293 ../../Firmware/mmu2/errors_list.h:294
-#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:296
-#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:298
-#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:300
-#: ../../Firmware/mmu2/errors_list.h:301 ../../Firmware/mmu2/errors_list.h:302
-#: ../../Firmware/mmu2/errors_list.h:303 ../../Firmware/mmu2/errors_list.h:304
+#: ../../Firmware/mmu2/errors_list.h:250 ../../Firmware/mmu2/errors_list.h:304
 #: ../../Firmware/mmu2/errors_list.h:305 ../../Firmware/mmu2/errors_list.h:306
 #: ../../Firmware/mmu2/errors_list.h:307 ../../Firmware/mmu2/errors_list.h:308
-#: ../../Firmware/mmu2/errors_list.h:309
+#: ../../Firmware/mmu2/errors_list.h:309 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:311 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:313 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:315 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:317 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:319 ../../Firmware/mmu2/errors_list.h:320
+#: ../../Firmware/mmu2/errors_list.h:321 ../../Firmware/mmu2/errors_list.h:322
+#: ../../Firmware/mmu2/errors_list.h:323 ../../Firmware/mmu2/errors_list.h:324
+#: ../../Firmware/mmu2/errors_list.h:325
 msgid "More details online."
 msgstr "Piu dettagli online."
 
@@ -1403,7 +1403,7 @@ msgid "Once"
 msgstr "Singolo"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9451 ../../Firmware/messages.cpp:175
+#: ../../Firmware/Marlin_main.cpp:9453 ../../Firmware/messages.cpp:175
 msgid "PAUSED THERMAL ERROR"
 msgstr "PAUSA ERRORE TERMICO"
 
@@ -1450,7 +1450,7 @@ msgstr ""
 "Impostazioni ->Calib. PINDA"
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:193
 msgid "PULLEY CANNOT MOVE"
 msgstr "PULEGGIA BLOCCATA"
 
@@ -1548,7 +1548,7 @@ msgid "Please place steel sheet on heatbed."
 msgstr "Posizionate la piastra d'acciaio sul piano riscaldato."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11208 ../../Firmware/Marlin_main.cpp:11238
+#: ../../Firmware/Marlin_main.cpp:11210 ../../Firmware/Marlin_main.cpp:11240
 #: ../../Firmware/messages.cpp:79
 msgid "Please press the knob to unload filament"
 msgstr "Premete la manopola per scaricare il filamento"
@@ -1645,7 +1645,7 @@ msgid "Press the knob"
 msgstr "Premere la manopola"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11220
+#: ../../Firmware/Marlin_main.cpp:11222
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Premete la manopola per preriscaldare l'ugello e continuare."
 
@@ -1703,8 +1703,8 @@ msgstr ""
 "Diametro ugello diverso dal G-Code. Controlla il valore nelle impostazioni. "
 "Stampa annullata."
 
-#. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:280
+#. MSG_DESC_PULLEY_CANNOT_MOVE c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:296
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 "Il motore della puleggia è bloccato. Verifica che la puleggia possa muoversi"
@@ -1717,7 +1717,7 @@ msgid "Pushing filament"
 msgstr "Spingo il filamento"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:171 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:181 ../../Firmware/mmu2/errors_list.h:227
 msgid "QUEUE FULL"
 msgstr "CODA PIENA"
 
@@ -1732,7 +1732,7 @@ msgid "Rear side [µm]"
 msgstr "Retro [µm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10598
+#: ../../Firmware/Marlin_main.cpp:10600
 msgid "Recovering print"
 msgstr "Recupero stampa"
 
@@ -1747,7 +1747,7 @@ msgid "Rename"
 msgstr "Rinomina"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:313
+#: ../../Firmware/mmu2/errors_list.h:276 ../../Firmware/mmu2/errors_list.h:329
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1784,7 +1784,7 @@ msgid "Retract from FINDA"
 msgstr "Retrai da FINDA"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:329 ../../Firmware/mmu2/errors_list.h:339
+#: ../../Firmware/mmu2/errors_list.h:346 ../../Firmware/mmu2/errors_list.h:356
 msgid "Retry"
 msgstr "Riprova"
 
@@ -1820,17 +1820,17 @@ msgid "SD card"
 msgstr "Mem. SD"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:197
 msgid "SELECTOR CANNOT HOME"
 msgstr "SELETTORE ERR MOVIM"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:198
 msgid "SELECTOR CANNOT MOVE"
 msgstr "SELETTORE BLOCCATO"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9477 ../../Firmware/messages.cpp:114
+#: ../../Firmware/Marlin_main.cpp:9479 ../../Firmware/messages.cpp:114
 msgid "STOPPED."
 msgstr "ARRESTATO."
 
@@ -2046,7 +2046,7 @@ msgid "Steel sheets"
 msgstr "Piani d'acciaio"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:333 ../../Firmware/mmu2/errors_list.h:343
+#: ../../Firmware/mmu2/errors_list.h:350 ../../Firmware/mmu2/errors_list.h:360
 msgid "Stop"
 msgstr "Stop"
 
@@ -2073,37 +2073,37 @@ msgid "Swapped"
 msgstr "Scambiato"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2233
+#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2236
 msgid "THERMAL ANOMALY"
 msgstr "ANOMALIA TERMICA"
 
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:196
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:198
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:209
 msgid "TMC DRIVER ERROR"
 msgstr "ERRORE DRIVER TMC"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:199
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:212
 msgid "TMC DRIVER RESET"
 msgstr "RESET DRIVER TMC"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:162 ../../Firmware/mmu2/errors_list.h:205
-#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:218
 msgid "TMC DRIVER SHORTED"
 msgstr "CORTOCIRC TMC DRIVER"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:193
-#: ../../Firmware/mmu2/errors_list.h:194 ../../Firmware/mmu2/errors_list.h:195
+#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:206
 msgid "TMC OVERHEAT ERROR"
 msgstr "ERR TMC SURRISCALD"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:202
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:164 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:214 ../../Firmware/mmu2/errors_list.h:215
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "TMC UNDERVOLTAGE ERR"
 
@@ -2137,7 +2137,7 @@ msgid "Testing filament"
 msgstr "Provo il filamento"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:286
+#: ../../Firmware/mmu2/errors_list.h:248 ../../Firmware/mmu2/errors_list.h:302
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2145,7 +2145,7 @@ msgstr ""
 "nulla che ne blocchi il movimento."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:284
+#: ../../Firmware/mmu2/errors_list.h:245 ../../Firmware/mmu2/errors_list.h:300
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2210,12 +2210,12 @@ msgid "Tune"
 msgstr "Regola"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:184 ../../Firmware/mmu2/errors_list.h:230
 msgid "UNLOAD MANUALLY"
 msgstr "SCARICA MANUALMENTE"
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:332 ../../Firmware/mmu2/errors_list.h:342
+#: ../../Firmware/mmu2/errors_list.h:349 ../../Firmware/mmu2/errors_list.h:359
 msgid "Unload"
 msgstr "Scarica"
 
@@ -2255,8 +2255,8 @@ msgid "Voltages"
 msgstr "Voltaggi"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:190
-#: ../../Firmware/mmu2/errors_list.h:191 ../../Firmware/mmu2/errors_list.h:192
+#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:203
 msgid "WARNING TMC TOO HOT"
 msgstr "ATTENZIONE TMC CALDO"
 
@@ -2463,12 +2463,12 @@ msgid "MMU power fails"
 msgstr "Manc. corr. MMU"
 
 #. MSG_TITLE_FILAMENT_EJECTED c=20
-#: ../../Firmware/mmu2/errors_list.h:175 ../../Firmware/mmu2/errors_list.h:220
+#: ../../Firmware/mmu2/errors_list.h:185 ../../Firmware/mmu2/errors_list.h:231
 msgid "FILAMENT EJECTED"
 msgstr "FILAMENTO ESPULSO"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:264 ../../Firmware/mmu2/errors_list.h:317
+#: ../../Firmware/mmu2/errors_list.h:279 ../../Firmware/mmu2/errors_list.h:333
 msgid ""
 "Filament detected unexpectedly. Ensure no filament is loaded. Check the "
 "sensors and wiring."
@@ -2477,12 +2477,12 @@ msgstr ""
 "filamento. Controllare i sensori e il cablaggio."
 
 #. MSG_TITLE_LOAD_TO_EXTRUDER_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:196
 msgid "LOAD TO EXTR. FAILED"
 msgstr "FALL CARICA SU EXTR."
 
 #. MSG_DESC_LOAD_TO_EXTRUDER_FAILED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:283
+#: ../../Firmware/mmu2/errors_list.h:244 ../../Firmware/mmu2/errors_list.h:299
 msgid ""
 "Loading to extruder failed. Inspect the filament tip shape. Refine the "
 "sensor calibration, if needed."
@@ -2490,10 +2490,10 @@ msgstr ""
 "Caricamento nell' estrusore non riuscito. Ispezionare la forma della punta "
 "del fil. Affinare la calib. del sensore, se necessario."
 
-#. MSG_TITLE_MCU_UNDERVOLTAGE_VCC c=20
-#: ../../Firmware/mmu2/errors_list.h:166 ../../Firmware/mmu2/errors_list.h:211
-msgid "MCU UNDERVOLTAGE VCC"
-msgstr "SOTTOTENSION MCU VCC"
+#. MSG_TITLE_MCU_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:222
+msgid "MMU MCU ERROR"
+msgstr "ERRORE MMU MCU"
 
 #. MSG_MATERIAL_CHANGES c=18
 #: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:1095
@@ -2502,32 +2502,31 @@ msgid "Material changes"
 msgstr "Scambi materiali"
 
 #. MSG_DESC_FILAMENT_EJECTED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:280 ../../Firmware/mmu2/errors_list.h:334
 msgid "Remove the ejected filament from the front of the MMU."
 msgstr "Rimuovere il filamento espulso dalla parte anteriore dell MMU."
 
-#. MSG_BTN_RESTART_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:331 ../../Firmware/mmu2/errors_list.h:341
-msgid "RstMMU"
-msgstr "RstMMU"
+#. MSG_BTN_RESET_MMU c=8
+#: ../../Firmware/mmu2/errors_list.h:348 ../../Firmware/mmu2/errors_list.h:358
+msgid "ResetMMU"
+msgstr "ResetMMU"
 
 #. MSG_DESC_INSPECT_FINDA c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:282
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:298
 msgid ""
 "Selector can't move due to FINDA detecting a filament. Make sure no filament"
-" is in selector and FINDA works properly."
+" is in Selector and FINDA works properly."
 msgstr ""
 "Il selettore non può muoversi perché FINDA rileva un fil. Assicurati che "
 "nessun fil. sia nel selettore e che FINDA funzioni correttamente."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:268 ../../Firmware/mmu2/errors_list.h:315
+#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:331
 msgid ""
-"The MMU firmware version incompatible with the printer's FW. Update to "
-"version 2.1.9."
+"MMU FW version is incompatible with printer FW.Update to version 3.0.0."
 msgstr ""
 "La versione del firmware dell MMU non è compatibile con il firmware della "
-"stampante. Aggiornamento alla versione 2.1.9."
+"stampante. Aggiornamento alla versione 3.0.0."
 
 #. MSG_PRELOAD_TO_MMU c=17
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5231
@@ -2542,6 +2541,16 @@ msgstr "Firmware MK3 rilevato su stampante MK3S"
 msgid "MK3S firmware detected on MK3 printer"
 msgstr "Firmware MK3S rilevato su stampante MK3"
 
+#. MSG_TITLE_UNKNOWN_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:232
+msgid "UNKNOWN ERROR"
+msgstr "ERRORE SCONOSCIUTO"
+
+#. MSG_DESC_UNKNOWN_ERROR c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:335
+msgid "Unexpected error occurred."
+msgstr "Si è verificato un errore imprevisto."
+
 #~ msgid "XFLASH init"
 #~ msgstr "Inizializza XFLASH"
 

lang/po/Firmware_nl.po

@@ -199,7 +199,7 @@ msgid "Brightness"
 msgstr "Helderheid"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:178 ../../Firmware/mmu2/errors_list.h:224
 msgid "COMMUNICATION ERROR"
 msgstr "COMMUNICATIEFOUT"
 
@@ -253,13 +253,13 @@ msgid "Calibration done"
 msgstr "Kalibratie klaar"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:234 ../../Firmware/mmu2/errors_list.h:285
-#: ../../Firmware/mmu2/errors_list.h:287
+#: ../../Firmware/mmu2/errors_list.h:246 ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2/errors_list.h:303
 msgid "Can't move Selector or Idler."
 msgstr "Kan selector of spanrol niet bewegen."
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:260 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:328
 msgid ""
 "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
@@ -421,7 +421,7 @@ msgid "Dim"
 msgstr "Dim"
 
 #. MSG_BTN_DISABLE_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:334 ../../Firmware/mmu2/errors_list.h:344
+#: ../../Firmware/mmu2/errors_list.h:351 ../../Firmware/mmu2/errors_list.h:361
 msgid "Disable"
 msgstr "Uitschak"
 
@@ -459,7 +459,7 @@ msgstr ""
 "opnieuw in te stellen?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:330 ../../Firmware/mmu2/errors_list.h:340
+#: ../../Firmware/mmu2/errors_list.h:347 ../../Firmware/mmu2/errors_list.h:357
 msgid "Done"
 msgstr "Klaar"
 
@@ -560,18 +560,18 @@ msgstr "F.Jam ontdek."
 msgid "F. runout"
 msgstr "FS. uitloop"
 
-#. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:169 ../../Firmware/mmu2/errors_list.h:214
-msgid "FILAMENT ALREADY LOA"
+#. MSG_TITLE_FILAMENT_ALREADY_LOADED c=20
+#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:225
+msgid "FIL. ALREADY LOADED"
 msgstr "FILAMENT AL GELADEN"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:135 ../../Firmware/mmu2/errors_list.h:178
+#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:189
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA TRIGGERDE NIET"
 
-#. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:277
+#. MSG_DESC_FINDA_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:293
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -580,7 +580,7 @@ msgstr ""
 "ontladen. Controleer of Fil. kan bewegen en of de FINDA werkt."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:225 ../../Firmware/mmu2/errors_list.h:276
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:292
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -588,9 +588,9 @@ msgstr ""
 "FINDA ging niet af bij het laden van de filament. Controleer of het filament"
 " kan bewegen en FINDA werkt."
 
-#. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:179
-msgid "FINDA: FILAM. STUCK"
+#. MSG_TITLE_FINDA_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:190
+msgid "FINDA FILAM. STUCK"
 msgstr "FINDA NIET FIL.VRIJ"
 
 #. MSG_FS_ACTION c=10
@@ -600,22 +600,22 @@ msgid "FS Action"
 msgstr "FS actie"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:191
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSEN. NIET AF GEGAAN"
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:194
 msgid "FSENSOR TOO EARLY"
 msgstr "FSENSOR TE VROEG"
 
-#. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:181
-msgid "FSENSOR: FIL. STUCK"
+#. MSG_TITLE_FSENSOR_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:192
+msgid "FSENSOR FIL. STUCK"
 msgstr "FSENSOR FIL. VAST"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:218
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:229
 msgid "FW RUNTIME ERROR"
 msgstr "FW RUNTIME FOUT"
 
@@ -714,8 +714,8 @@ msgstr "Fil. niet geladen"
 msgid "Filament sensor"
 msgstr "Filamentsensor"
 
-#. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:279
+#. MSG_DESC_FSENSOR_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:295
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -724,16 +724,16 @@ msgstr ""
 "Controleer of het filament kan bewegen en de sensor werkt."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:278
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:294
 msgid ""
-"Filament sensor didn't trigger while loading the filament. Ensure the "
-"filament reached the fsensor and the sensor works."
+"Filament sensor didn't trigger while loading the filament. Ensure the sensor"
+" is calibrated and the filament reached it."
 msgstr ""
 "De filament sensor ging niet af tijdens het laden van de filament. "
 "Controleer of het filament de fsensor heeft bereikt en de sensor werkt."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:281
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:297
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -863,7 +863,7 @@ msgid "Heating"
 msgstr "Opwarmen"
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9272
+#: ../../Firmware/Marlin_main.cpp:9274
 msgid "Heating disabled by safety timer."
 msgstr "Verwarming uitgeschakeld door veiligheidstimer."
 
@@ -927,22 +927,22 @@ msgid "I will run z calibration now."
 msgstr "Begin nu met z-kalibratie."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:199
 msgid "IDLER CANNOT HOME"
 msgstr "SPANROL STARTPOSFOUT"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:200
 msgid "IDLER CANNOT MOVE"
 msgstr "SPANROL BEWEGT NIET"
 
 #. MSG_TITLE_INSPECT_FINDA c=20
-#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:195
 msgid "INSPECT FINDA"
 msgstr "CONTROLEER FINDA"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:215
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:226
 msgid "INVALID TOOL"
 msgstr "ONGELDIG TOOL"
 
@@ -984,7 +984,7 @@ msgstr ""
 "Steek a.u.b. filament (maar niet laden) in de extruder en druk op knop."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:278 ../../Firmware/mmu2/errors_list.h:332
 msgid ""
 "Internal runtime error. Try resetting the MMU or updating the firmware."
 msgstr ""
@@ -1105,12 +1105,12 @@ msgid "Loud"
 msgstr "Hard"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:217
+#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:228
 msgid "MMU FW UPDATE NEEDED"
 msgstr "MMU FW UPDATE NODIG"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:262 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:277 ../../Firmware/mmu2/errors_list.h:330
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "MMU Firmware interne fout, reset de MMU."
 
@@ -1120,7 +1120,7 @@ msgid "MMU Mode"
 msgstr "MMU Mod"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:212
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:223
 msgid "MMU NOT RESPONDING"
 msgstr "MMU REAGEERT NIET"
 
@@ -1130,8 +1130,8 @@ msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU Retry: Temperatuur herstellen..."
 
 #. MSG_TITLE_SELFTEST_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:165 ../../Firmware/mmu2/errors_list.h:208
-#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:220 ../../Firmware/mmu2/errors_list.h:221
 msgid "MMU SELFTEST FAILED"
 msgstr "MMU ZELFTEST MISLUKT"
 
@@ -1148,12 +1148,12 @@ msgid "MMU load fails"
 msgstr "MMU laadfout"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:311
+#: ../../Firmware/mmu2/errors_list.h:274 ../../Firmware/mmu2/errors_list.h:327
 msgid "MMU not responding correctly. Check the wiring and connectors."
 msgstr "MMU reageert niet correct. Controleer de bedrading en connectoren."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:258 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:326
 msgid "MMU not responding. Check the wiring and connectors."
 msgstr "MMU reageert niet. Controleer de bedrading en connectoren."
 
@@ -1221,18 +1221,18 @@ msgid "Model"
 msgstr "Model"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:288
-#: ../../Firmware/mmu2/errors_list.h:289 ../../Firmware/mmu2/errors_list.h:290
-#: ../../Firmware/mmu2/errors_list.h:291 ../../Firmware/mmu2/errors_list.h:292
-#: ../../Firmware/mmu2/errors_list.h:293 ../../Firmware/mmu2/errors_list.h:294
-#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:296
-#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:298
-#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:300
-#: ../../Firmware/mmu2/errors_list.h:301 ../../Firmware/mmu2/errors_list.h:302
-#: ../../Firmware/mmu2/errors_list.h:303 ../../Firmware/mmu2/errors_list.h:304
+#: ../../Firmware/mmu2/errors_list.h:250 ../../Firmware/mmu2/errors_list.h:304
 #: ../../Firmware/mmu2/errors_list.h:305 ../../Firmware/mmu2/errors_list.h:306
 #: ../../Firmware/mmu2/errors_list.h:307 ../../Firmware/mmu2/errors_list.h:308
-#: ../../Firmware/mmu2/errors_list.h:309
+#: ../../Firmware/mmu2/errors_list.h:309 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:311 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:313 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:315 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:317 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:319 ../../Firmware/mmu2/errors_list.h:320
+#: ../../Firmware/mmu2/errors_list.h:321 ../../Firmware/mmu2/errors_list.h:322
+#: ../../Firmware/mmu2/errors_list.h:323 ../../Firmware/mmu2/errors_list.h:324
+#: ../../Firmware/mmu2/errors_list.h:325
 msgid "More details online."
 msgstr "Meer details online."
 
@@ -1404,7 +1404,7 @@ msgid "Once"
 msgstr "Eenmaal"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9451 ../../Firmware/messages.cpp:175
+#: ../../Firmware/Marlin_main.cpp:9453 ../../Firmware/messages.cpp:175
 msgid "PAUSED THERMAL ERROR"
 msgstr "PAUSE TERMISCHE FOUT"
 
@@ -1451,7 +1451,7 @@ msgstr ""
 "menu Instellingen-> PINDA kalib."
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:193
 msgid "PULLEY CANNOT MOVE"
 msgstr "RIEMSCH. BEWEGT NIET"
 
@@ -1551,7 +1551,7 @@ msgid "Please place steel sheet on heatbed."
 msgstr "Leg staalplaat op bed."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11208 ../../Firmware/Marlin_main.cpp:11238
+#: ../../Firmware/Marlin_main.cpp:11210 ../../Firmware/Marlin_main.cpp:11240
 #: ../../Firmware/messages.cpp:79
 msgid "Please press the knob to unload filament"
 msgstr "Druk op de knop om filament te verwijderen"
@@ -1648,7 +1648,7 @@ msgid "Press the knob"
 msgstr "Druk op knop"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11220
+#: ../../Firmware/Marlin_main.cpp:11222
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Druk op de knop om de tuit voor te verwarmen en door te gaan."
 
@@ -1706,8 +1706,8 @@ msgstr ""
 "De diameter van de tuit van de printer verschilt van de G-code. Controleer "
 "de waarde in de instellingen. Afdrukken geannuleerd."
 
-#. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:280
+#. MSG_DESC_PULLEY_CANNOT_MOVE c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:296
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 "Riemschijf motor is vastgelopen. Controleer of de poelie kan bewegen en "
@@ -1720,7 +1720,7 @@ msgid "Pushing filament"
 msgstr "Duwe filament"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:171 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:181 ../../Firmware/mmu2/errors_list.h:227
 msgid "QUEUE FULL"
 msgstr "QUEUE VOL"
 
@@ -1735,7 +1735,7 @@ msgid "Rear side [µm]"
 msgstr "Achterkant[µm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10598
+#: ../../Firmware/Marlin_main.cpp:10600
 msgid "Recovering print"
 msgstr "Print herstellen"
 
@@ -1751,7 +1751,7 @@ msgid "Rename"
 msgstr "Hernoem"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:313
+#: ../../Firmware/mmu2/errors_list.h:276 ../../Firmware/mmu2/errors_list.h:329
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1788,7 +1788,7 @@ msgid "Retract from FINDA"
 msgstr "Intrekken van FINDA"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:329 ../../Firmware/mmu2/errors_list.h:339
+#: ../../Firmware/mmu2/errors_list.h:346 ../../Firmware/mmu2/errors_list.h:356
 msgid "Retry"
 msgstr "Retry"
 
@@ -1824,17 +1824,17 @@ msgid "SD card"
 msgstr "SD kaart"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:197
 msgid "SELECTOR CANNOT HOME"
 msgstr "SELECTOR STARTP_FOUT"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:198
 msgid "SELECTOR CANNOT MOVE"
 msgstr "SELECTOR BEWEG FOUT"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9477 ../../Firmware/messages.cpp:114
+#: ../../Firmware/Marlin_main.cpp:9479 ../../Firmware/messages.cpp:114
 msgid "STOPPED."
 msgstr "GESTOPT."
 
@@ -2053,7 +2053,7 @@ msgid "Steel sheets"
 msgstr "Staalplaten"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:333 ../../Firmware/mmu2/errors_list.h:343
+#: ../../Firmware/mmu2/errors_list.h:350 ../../Firmware/mmu2/errors_list.h:360
 msgid "Stop"
 msgstr "Stop"
 
@@ -2080,37 +2080,37 @@ msgid "Swapped"
 msgstr "Gewisseld"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2233
+#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2236
 msgid "THERMAL ANOMALY"
 msgstr "THERMISCHE ANOMALIE"
 
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:196
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:198
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:209
 msgid "TMC DRIVER ERROR"
 msgstr "TMC FOUT"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:199
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:212
 msgid "TMC DRIVER RESET"
 msgstr "TMC RESET"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:162 ../../Firmware/mmu2/errors_list.h:205
-#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:218
 msgid "TMC DRIVER SHORTED"
 msgstr "TMC KORTSLUITING"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:193
-#: ../../Firmware/mmu2/errors_list.h:194 ../../Firmware/mmu2/errors_list.h:195
+#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:206
 msgid "TMC OVERHEAT ERROR"
 msgstr "TMC OVERHITTINGSFOUT"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:202
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:164 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:214 ../../Firmware/mmu2/errors_list.h:215
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "TMC ONDERVOLT. FOUT"
 
@@ -2144,7 +2144,7 @@ msgid "Testing filament"
 msgstr "Teste filament"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:286
+#: ../../Firmware/mmu2/errors_list.h:248 ../../Firmware/mmu2/errors_list.h:302
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2152,7 +2152,7 @@ msgstr ""
 "blokkeert."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:284
+#: ../../Firmware/mmu2/errors_list.h:245 ../../Firmware/mmu2/errors_list.h:300
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2217,12 +2217,12 @@ msgid "Tune"
 msgstr "Fijnafstemming"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:184 ../../Firmware/mmu2/errors_list.h:230
 msgid "UNLOAD MANUALLY"
 msgstr "ONTLAAD MANUEEL"
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:332 ../../Firmware/mmu2/errors_list.h:342
+#: ../../Firmware/mmu2/errors_list.h:349 ../../Firmware/mmu2/errors_list.h:359
 msgid "Unload"
 msgstr "Ontla."
 
@@ -2262,8 +2262,8 @@ msgid "Voltages"
 msgstr "Spanning"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:190
-#: ../../Firmware/mmu2/errors_list.h:191 ../../Firmware/mmu2/errors_list.h:192
+#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:203
 msgid "WARNING TMC TOO HOT"
 msgstr "WAARSCH. TMC TE HEET"
 
@@ -2467,12 +2467,12 @@ msgid "MMU power fails"
 msgstr "MMU stroomstor."
 
 #. MSG_TITLE_FILAMENT_EJECTED c=20
-#: ../../Firmware/mmu2/errors_list.h:175 ../../Firmware/mmu2/errors_list.h:220
+#: ../../Firmware/mmu2/errors_list.h:185 ../../Firmware/mmu2/errors_list.h:231
 msgid "FILAMENT EJECTED"
 msgstr "FILAMENT UITGEWORPEN"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:264 ../../Firmware/mmu2/errors_list.h:317
+#: ../../Firmware/mmu2/errors_list.h:279 ../../Firmware/mmu2/errors_list.h:333
 msgid ""
 "Filament detected unexpectedly. Ensure no filament is loaded. Check the "
 "sensors and wiring."
@@ -2481,12 +2481,12 @@ msgstr ""
 "geladen. Controleer de sensoren en bedrading."
 
 #. MSG_TITLE_LOAD_TO_EXTRUDER_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:196
 msgid "LOAD TO EXTR. FAILED"
 msgstr "FOUT LADEN NA. EXTR."
 
 #. MSG_DESC_LOAD_TO_EXTRUDER_FAILED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:283
+#: ../../Firmware/mmu2/errors_list.h:244 ../../Firmware/mmu2/errors_list.h:299
 msgid ""
 "Loading to extruder failed. Inspect the filament tip shape. Refine the "
 "sensor calibration, if needed."
@@ -2494,10 +2494,10 @@ msgstr ""
 "Laden naar extruder is mislukt. Inspecteer de vorm van de filamenttip. "
 "Verfijn de sensorkalibratie, indien nodig."
 
-#. MSG_TITLE_MCU_UNDERVOLTAGE_VCC c=20
-#: ../../Firmware/mmu2/errors_list.h:166 ../../Firmware/mmu2/errors_list.h:211
-msgid "MCU UNDERVOLTAGE VCC"
-msgstr "MCU ONDERSPANN. VCC"
+#. MSG_TITLE_MCU_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:222
+msgid "MMU MCU ERROR"
+msgstr "MMU MCU FOUT"
 
 #. MSG_MATERIAL_CHANGES c=18
 #: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:1095
@@ -2506,32 +2506,31 @@ msgid "Material changes"
 msgstr "Materailwisseling."
 
 #. MSG_DESC_FILAMENT_EJECTED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:280 ../../Firmware/mmu2/errors_list.h:334
 msgid "Remove the ejected filament from the front of the MMU."
 msgstr "Verwijder het uitgeworpen filament uit de voorkant van de MMU."
 
-#. MSG_BTN_RESTART_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:331 ../../Firmware/mmu2/errors_list.h:341
-msgid "RstMMU"
-msgstr "RstMMU"
+#. MSG_BTN_RESET_MMU c=8
+#: ../../Firmware/mmu2/errors_list.h:348 ../../Firmware/mmu2/errors_list.h:358
+msgid "ResetMMU"
+msgstr "ResetMMU"
 
 #. MSG_DESC_INSPECT_FINDA c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:282
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:298
 msgid ""
 "Selector can't move due to FINDA detecting a filament. Make sure no filament"
-" is in selector and FINDA works properly."
+" is in Selector and FINDA works properly."
 msgstr ""
 "Selector kan niet bewegen omdat FINDA een filament detecteert. Zorg ervoor "
 "dat er geen fil. in de selector zit en dat FINDA naar behoren werkt."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:268 ../../Firmware/mmu2/errors_list.h:315
+#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:331
 msgid ""
-"The MMU firmware version incompatible with the printer's FW. Update to "
-"version 2.1.9."
+"MMU FW version is incompatible with printer FW.Update to version 3.0.0."
 msgstr ""
 "De firmwareversie van de MMU is niet compatibel met de firmware van de "
-"printer. Update naar versie 2.1.9."
+"printer. Update naar versie 3.0.0."
 
 #. MSG_PRELOAD_TO_MMU c=17
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5231
@@ -2546,6 +2545,16 @@ msgstr "MK3-firmware bij MK3S-printer gedetecteerd"
 msgid "MK3S firmware detected on MK3 printer"
 msgstr "MK3S-firmware op MK3-printer ontdekt"
 
+#. MSG_TITLE_UNKNOWN_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:232
+msgid "UNKNOWN ERROR"
+msgstr "ONBEKENDE FOUT"
+
+#. MSG_DESC_UNKNOWN_ERROR c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:335
+msgid "Unexpected error occurred."
+msgstr "Er is een onverwachte fout opgetreden."
+
 #~ msgid "XFLASH init"
 #~ msgstr "XFLASH init"
 

lang/po/Firmware_no.po

@@ -199,7 +199,7 @@ msgid "Brightness"
 msgstr "Lysstyrke"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:178 ../../Firmware/mmu2/errors_list.h:224
 msgid "COMMUNICATION ERROR"
 msgstr "KOMMUNIKASJONSFEIL"
 
@@ -253,13 +253,13 @@ msgid "Calibration done"
 msgstr "Kalibrering ferdig"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:234 ../../Firmware/mmu2/errors_list.h:285
-#: ../../Firmware/mmu2/errors_list.h:287
+#: ../../Firmware/mmu2/errors_list.h:246 ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2/errors_list.h:303
 msgid "Can't move Selector or Idler."
 msgstr "Kan ikke flytte velger eller tomgangshjul"
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:260 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:328
 msgid ""
 "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
@@ -420,7 +420,7 @@ msgid "Dim"
 msgstr "Svak"
 
 #. MSG_BTN_DISABLE_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:334 ../../Firmware/mmu2/errors_list.h:344
+#: ../../Firmware/mmu2/errors_list.h:351 ../../Firmware/mmu2/errors_list.h:361
 msgid "Disable"
 msgstr "Deaktiv."
 
@@ -457,7 +457,7 @@ msgstr ""
 "platen?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:330 ../../Firmware/mmu2/errors_list.h:340
+#: ../../Firmware/mmu2/errors_list.h:347 ../../Firmware/mmu2/errors_list.h:357
 msgid "Done"
 msgstr "Ferdig"
 
@@ -558,18 +558,18 @@ msgstr "F. kork føle"
 msgid "F. runout"
 msgstr "F. Løput"
 
-#. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:169 ../../Firmware/mmu2/errors_list.h:214
-msgid "FILAMENT ALREADY LOA"
+#. MSG_TITLE_FILAMENT_ALREADY_LOADED c=20
+#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:225
+msgid "FIL. ALREADY LOADED"
 msgstr "FILAMENT ALLEREDE LA"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:135 ../../Firmware/mmu2/errors_list.h:178
+#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:189
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA IKKE UTLØST"
 
-#. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:277
+#. MSG_DESC_FINDA_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:293
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -578,7 +578,7 @@ msgstr ""
 "Sikre at filamentet kan beveges og FINDA fungerer."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:225 ../../Firmware/mmu2/errors_list.h:276
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:292
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -586,10 +586,10 @@ msgstr ""
 "FINDA ble ikke trigger under lasting av filament. Sikre at filamentet kan "
 "beveges og FINDA fungerer."
 
-#. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:179
-msgid "FINDA: FILAM. STUCK"
-msgstr "FINDA: FILAM. FAST"
+#. MSG_TITLE_FINDA_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:190
+msgid "FINDA FILAM. STUCK"
+msgstr "FINDA FILAM. FAST"
 
 #. MSG_FS_ACTION c=10
 #: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:4048
@@ -598,22 +598,22 @@ msgid "FS Action"
 msgstr "FS aksjon"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:191
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSENSOR IKKE TIRGG."
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:194
 msgid "FSENSOR TOO EARLY"
 msgstr "FSENSOR FOR TIDLIG"
 
-#. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:181
-msgid "FSENSOR: FIL. STUCK"
-msgstr "FSENSOR: FIL FAST"
+#. MSG_TITLE_FSENSOR_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:192
+msgid "FSENSOR FIL. STUCK"
+msgstr "FSENSOR FIL FAST"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:218
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:229
 msgid "FW RUNTIME ERROR"
 msgstr "FW RUNTIME FEIL"
 
@@ -712,8 +712,8 @@ msgstr "Fil. ikke lastet"
 msgid "Filament sensor"
 msgstr "Filamentsensor"
 
-#. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:279
+#. MSG_DESC_FSENSOR_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:295
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -722,16 +722,16 @@ msgstr ""
 "filamentet kan beveges og sensoren fungerer."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:278
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:294
 msgid ""
-"Filament sensor didn't trigger while loading the filament. Ensure the "
-"filament reached the fsensor and the sensor works."
+"Filament sensor didn't trigger while loading the filament. Ensure the sensor"
+" is calibrated and the filament reached it."
 msgstr ""
 "Filament sensor ble ikke utløst imens filamentet ble lastet. Sikre at "
 "filamentet rekker fsensor og at sensoren fungerer."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:281
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:297
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -857,7 +857,7 @@ msgid "Heating"
 msgstr "Varmer opp"
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9272
+#: ../../Firmware/Marlin_main.cpp:9274
 msgid "Heating disabled by safety timer."
 msgstr "Varme skrudd av pga. sikkerhet."
 
@@ -920,22 +920,22 @@ msgid "I will run z calibration now."
 msgstr "Nå kjører jeg Z-kalibreringen."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:199
 msgid "IDLER CANNOT HOME"
 msgstr "IDLER CANNOT HOME"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:200
 msgid "IDLER CANNOT MOVE"
 msgstr "IDLER CANNOT MOVE"
 
 #. MSG_TITLE_INSPECT_FINDA c=20
-#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:195
 msgid "INSPECT FINDA"
 msgstr "KONTROLLER FINDA"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:215
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:226
 msgid "INVALID TOOL"
 msgstr "UGYLDIG VERKTØY"
 
@@ -976,7 +976,7 @@ msgid ""
 msgstr "Sett inn filamentet i ekstruderen og deretter trykk inn valghjulet."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:278 ../../Firmware/mmu2/errors_list.h:332
 msgid ""
 "Internal runtime error. Try resetting the MMU or updating the firmware."
 msgstr "Intern runtime feil. Prøv omstart av MMU eller oppdater fastvaren."
@@ -1095,12 +1095,12 @@ msgid "Loud"
 msgstr "Høyt"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:217
+#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:228
 msgid "MMU FW UPDATE NEEDED"
 msgstr "MMU FV OPPDAT. NØDVE"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:262 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:277 ../../Firmware/mmu2/errors_list.h:330
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "MMU fastvare intern feil, vennligst nullstill MMU-en."
 
@@ -1110,7 +1110,7 @@ msgid "MMU Mode"
 msgstr "MMU Mod."
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:212
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:223
 msgid "MMU NOT RESPONDING"
 msgstr "MMU SVARER IKKE"
 
@@ -1120,8 +1120,8 @@ msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU Retry: gjenoppretter temperatur..."
 
 #. MSG_TITLE_SELFTEST_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:165 ../../Firmware/mmu2/errors_list.h:208
-#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:220 ../../Firmware/mmu2/errors_list.h:221
 msgid "MMU SELFTEST FAILED"
 msgstr "MMU SELVTEST FEILET"
 
@@ -1138,12 +1138,12 @@ msgid "MMU load fails"
 msgstr "MMU lastefeil"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:311
+#: ../../Firmware/mmu2/errors_list.h:274 ../../Firmware/mmu2/errors_list.h:327
 msgid "MMU not responding correctly. Check the wiring and connectors."
 msgstr "MMU svarer ikke riktig. Sjekk ledninger og koblinger."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:258 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:326
 msgid "MMU not responding. Check the wiring and connectors."
 msgstr "MMU svarer ikke. Sjekk ledninger og koblinger."
 
@@ -1211,18 +1211,18 @@ msgid "Model"
 msgstr "Modell"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:288
-#: ../../Firmware/mmu2/errors_list.h:289 ../../Firmware/mmu2/errors_list.h:290
-#: ../../Firmware/mmu2/errors_list.h:291 ../../Firmware/mmu2/errors_list.h:292
-#: ../../Firmware/mmu2/errors_list.h:293 ../../Firmware/mmu2/errors_list.h:294
-#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:296
-#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:298
-#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:300
-#: ../../Firmware/mmu2/errors_list.h:301 ../../Firmware/mmu2/errors_list.h:302
-#: ../../Firmware/mmu2/errors_list.h:303 ../../Firmware/mmu2/errors_list.h:304
+#: ../../Firmware/mmu2/errors_list.h:250 ../../Firmware/mmu2/errors_list.h:304
 #: ../../Firmware/mmu2/errors_list.h:305 ../../Firmware/mmu2/errors_list.h:306
 #: ../../Firmware/mmu2/errors_list.h:307 ../../Firmware/mmu2/errors_list.h:308
-#: ../../Firmware/mmu2/errors_list.h:309
+#: ../../Firmware/mmu2/errors_list.h:309 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:311 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:313 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:315 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:317 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:319 ../../Firmware/mmu2/errors_list.h:320
+#: ../../Firmware/mmu2/errors_list.h:321 ../../Firmware/mmu2/errors_list.h:322
+#: ../../Firmware/mmu2/errors_list.h:323 ../../Firmware/mmu2/errors_list.h:324
+#: ../../Firmware/mmu2/errors_list.h:325
 msgid "More details online."
 msgstr "Flere detaljer online"
 
@@ -1393,7 +1393,7 @@ msgid "Once"
 msgstr "En gang"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9451 ../../Firmware/messages.cpp:175
+#: ../../Firmware/Marlin_main.cpp:9453 ../../Firmware/messages.cpp:175
 msgid "PAUSED THERMAL ERROR"
 msgstr "PAUSET THERMISK FEIL"
 
@@ -1440,7 +1440,7 @@ msgstr ""
 "under Innstillinger -> PINDA kal."
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:193
 msgid "PULLEY CANNOT MOVE"
 msgstr "REIM UBEVEGELIG"
 
@@ -1538,7 +1538,7 @@ msgid "Please place steel sheet on heatbed."
 msgstr "Plasser stålplaten på varmesenga."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11208 ../../Firmware/Marlin_main.cpp:11238
+#: ../../Firmware/Marlin_main.cpp:11210 ../../Firmware/Marlin_main.cpp:11240
 #: ../../Firmware/messages.cpp:79
 msgid "Please press the knob to unload filament"
 msgstr "Trykk valghjulet for å ta ut filamentet"
@@ -1636,7 +1636,7 @@ msgid "Press the knob"
 msgstr "Trykk valghjulet"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11220
+#: ../../Firmware/Marlin_main.cpp:11222
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Trykk valghjulet for å forvarme dysen og fortsette."
 
@@ -1693,8 +1693,8 @@ msgstr ""
 "Printerens dysediameter er forskjellig fra G-Code. Sjekk Innstillinger for "
 "hva som er satt. Print avbrutt."
 
-#. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:280
+#. MSG_DESC_PULLEY_CANNOT_MOVE c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:296
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr "Reimmotor stanset. Sjekk at Reimen kan beveges og sjekk koblinger"
 
@@ -1705,7 +1705,7 @@ msgid "Pushing filament"
 msgstr "Dytter filament"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:171 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:181 ../../Firmware/mmu2/errors_list.h:227
 msgid "QUEUE FULL"
 msgstr "FULL KØ"
 
@@ -1720,7 +1720,7 @@ msgid "Rear side [µm]"
 msgstr "Baksiden [µm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10598
+#: ../../Firmware/Marlin_main.cpp:10600
 msgid "Recovering print"
 msgstr "Gjenopptar print"
 
@@ -1735,7 +1735,7 @@ msgid "Rename"
 msgstr "Gi nytt navn"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:313
+#: ../../Firmware/mmu2/errors_list.h:276 ../../Firmware/mmu2/errors_list.h:329
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1772,7 +1772,7 @@ msgid "Retract from FINDA"
 msgstr "ta tilbake fra FINDA"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:329 ../../Firmware/mmu2/errors_list.h:339
+#: ../../Firmware/mmu2/errors_list.h:346 ../../Firmware/mmu2/errors_list.h:356
 msgid "Retry"
 msgstr "Retry"
 
@@ -1808,17 +1808,17 @@ msgid "SD card"
 msgstr "SD-kort"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:197
 msgid "SELECTOR CANNOT HOME"
 msgstr "VELGER KAN IKKE HOME"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:198
 msgid "SELECTOR CANNOT MOVE"
 msgstr "SELEKTOR STÅR FAST"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9477 ../../Firmware/messages.cpp:114
+#: ../../Firmware/Marlin_main.cpp:9479 ../../Firmware/messages.cpp:114
 msgid "STOPPED."
 msgstr "STOPPET."
 
@@ -2029,7 +2029,7 @@ msgid "Steel sheets"
 msgstr "Stål plate"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:333 ../../Firmware/mmu2/errors_list.h:343
+#: ../../Firmware/mmu2/errors_list.h:350 ../../Firmware/mmu2/errors_list.h:360
 msgid "Stop"
 msgstr "Stop"
 
@@ -2056,37 +2056,37 @@ msgid "Swapped"
 msgstr "Byttet"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2233
+#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2236
 msgid "THERMAL ANOMALY"
 msgstr "THERMISK ANOMALI"
 
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:196
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:198
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:209
 msgid "TMC DRIVER ERROR"
 msgstr "TMC DRIVER FEIL"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:199
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:212
 msgid "TMC DRIVER RESET"
 msgstr "TMC DRIVER NULLSTILL"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:162 ../../Firmware/mmu2/errors_list.h:205
-#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:218
 msgid "TMC DRIVER SHORTED"
 msgstr "TMC DRIVER KORTSLUTT"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:193
-#: ../../Firmware/mmu2/errors_list.h:194 ../../Firmware/mmu2/errors_list.h:195
+#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:206
 msgid "TMC OVERHEAT ERROR"
 msgstr "TMC OVEROPPHETING"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:202
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:164 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:214 ../../Firmware/mmu2/errors_list.h:215
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "TMC LAVSPENNING FEIL"
 
@@ -2120,14 +2120,14 @@ msgid "Testing filament"
 msgstr "Tester filament"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:286
+#: ../../Firmware/mmu2/errors_list.h:248 ../../Firmware/mmu2/errors_list.h:302
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
 "Idleren kan ikke gå hjem riktig. sjekk om noe står i veien for bevegelsen."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:284
+#: ../../Firmware/mmu2/errors_list.h:245 ../../Firmware/mmu2/errors_list.h:300
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2191,12 +2191,12 @@ msgid "Tune"
 msgstr "Juster"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:184 ../../Firmware/mmu2/errors_list.h:230
 msgid "UNLOAD MANUALLY"
 msgstr "LAST UT MANUELT"
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:332 ../../Firmware/mmu2/errors_list.h:342
+#: ../../Firmware/mmu2/errors_list.h:349 ../../Firmware/mmu2/errors_list.h:359
 msgid "Unload"
 msgstr "Last ut"
 
@@ -2236,8 +2236,8 @@ msgid "Voltages"
 msgstr "Strøm/Volt"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:190
-#: ../../Firmware/mmu2/errors_list.h:191 ../../Firmware/mmu2/errors_list.h:192
+#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:203
 msgid "WARNING TMC TOO HOT"
 msgstr "VARSEL TMC FOR VARM"
 
@@ -2440,12 +2440,12 @@ msgid "MMU power fails"
 msgstr "MMU strøm feil"
 
 #. MSG_TITLE_FILAMENT_EJECTED c=20
-#: ../../Firmware/mmu2/errors_list.h:175 ../../Firmware/mmu2/errors_list.h:220
+#: ../../Firmware/mmu2/errors_list.h:185 ../../Firmware/mmu2/errors_list.h:231
 msgid "FILAMENT EJECTED"
 msgstr "FILAMENT UTSETTET"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:264 ../../Firmware/mmu2/errors_list.h:317
+#: ../../Firmware/mmu2/errors_list.h:279 ../../Firmware/mmu2/errors_list.h:333
 msgid ""
 "Filament detected unexpectedly. Ensure no filament is loaded. Check the "
 "sensors and wiring."
@@ -2454,12 +2454,12 @@ msgstr ""
 "sensorene og ledningene."
 
 #. MSG_TITLE_LOAD_TO_EXTRUDER_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:196
 msgid "LOAD TO EXTR. FAILED"
 msgstr "MISLUKT LAST EXTR."
 
 #. MSG_DESC_LOAD_TO_EXTRUDER_FAILED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:283
+#: ../../Firmware/mmu2/errors_list.h:244 ../../Firmware/mmu2/errors_list.h:299
 msgid ""
 "Loading to extruder failed. Inspect the filament tip shape. Refine the "
 "sensor calibration, if needed."
@@ -2467,10 +2467,10 @@ msgstr ""
 "Lasting til ekstruder mislyktes. Inspiser filamentspissens form. Avgrens "
 "sensorkalibreringen om nødvendig."
 
-#. MSG_TITLE_MCU_UNDERVOLTAGE_VCC c=20
-#: ../../Firmware/mmu2/errors_list.h:166 ../../Firmware/mmu2/errors_list.h:211
-msgid "MCU UNDERVOLTAGE VCC"
-msgstr "MCU UNDERSPENN. VCC"
+#. MSG_TITLE_MCU_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:222
+msgid "MMU MCU ERROR"
+msgstr "MMU MCU FEIL"
 
 #. MSG_MATERIAL_CHANGES c=18
 #: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:1095
@@ -2479,32 +2479,31 @@ msgid "Material changes"
 msgstr "Materialutveksling"
 
 #. MSG_DESC_FILAMENT_EJECTED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:280 ../../Firmware/mmu2/errors_list.h:334
 msgid "Remove the ejected filament from the front of the MMU."
 msgstr "Fjern det utkastede filamentet fra fronten av MMU."
 
-#. MSG_BTN_RESTART_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:331 ../../Firmware/mmu2/errors_list.h:341
-msgid "RstMMU"
-msgstr "RstMMU"
+#. MSG_BTN_RESET_MMU c=8
+#: ../../Firmware/mmu2/errors_list.h:348 ../../Firmware/mmu2/errors_list.h:358
+msgid "ResetMMU"
+msgstr "ResetMMU"
 
 #. MSG_DESC_INSPECT_FINDA c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:282
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:298
 msgid ""
 "Selector can't move due to FINDA detecting a filament. Make sure no filament"
-" is in selector and FINDA works properly."
+" is in Selector and FINDA works properly."
 msgstr ""
 "Velgeren kan ikke bevege seg på grunn av at FINDA oppdager en filament. Sørg"
 " for at ingen fil. er i velgeren og at FINDA fungerer som den skal."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:268 ../../Firmware/mmu2/errors_list.h:315
+#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:331
 msgid ""
-"The MMU firmware version incompatible with the printer's FW. Update to "
-"version 2.1.9."
+"MMU FW version is incompatible with printer FW.Update to version 3.0.0."
 msgstr ""
 "MMU fastvareversjon er inkompatibel med skriverens FW. Oppdatering til "
-"versjon 2.1.9."
+"versjon 3.0.0."
 
 #. MSG_PRELOAD_TO_MMU c=17
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5231
@@ -2519,6 +2518,16 @@ msgstr "MK3 system funnet på MK3S printer"
 msgid "MK3S firmware detected on MK3 printer"
 msgstr "MK3S systemvare funnet på MK3 printer"
 
+#. MSG_TITLE_UNKNOWN_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:232
+msgid "UNKNOWN ERROR"
+msgstr "UKJENT FEIL"
+
+#. MSG_DESC_UNKNOWN_ERROR c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:335
+msgid "Unexpected error occurred."
+msgstr "Det oppstod en uventet feil."
+
 #~ msgid "XFLASH init"
 #~ msgstr "XFLASH init"
 

lang/po/Firmware_pl.po

@@ -199,7 +199,7 @@ msgid "Brightness"
 msgstr "Jasnosc"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:178 ../../Firmware/mmu2/errors_list.h:224
 msgid "COMMUNICATION ERROR"
 msgstr "BLAD KOMUNIKACJI"
 
@@ -253,13 +253,13 @@ msgid "Calibration done"
 msgstr "Kalibracja OK"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:234 ../../Firmware/mmu2/errors_list.h:285
-#: ../../Firmware/mmu2/errors_list.h:287
+#: ../../Firmware/mmu2/errors_list.h:246 ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2/errors_list.h:303
 msgid "Can't move Selector or Idler."
 msgstr "Nie mozna poruszyc wybieraka lub docisku"
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:260 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:328
 msgid ""
 "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
@@ -421,7 +421,7 @@ msgid "Dim"
 msgstr "Sciemn"
 
 #. MSG_BTN_DISABLE_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:334 ../../Firmware/mmu2/errors_list.h:344
+#: ../../Firmware/mmu2/errors_list.h:351 ../../Firmware/mmu2/errors_list.h:361
 msgid "Disable"
 msgstr "Wylacz"
 
@@ -458,7 +458,7 @@ msgstr ""
 "stolikiem?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:330 ../../Firmware/mmu2/errors_list.h:340
+#: ../../Firmware/mmu2/errors_list.h:347 ../../Firmware/mmu2/errors_list.h:357
 msgid "Done"
 msgstr "Wyk."
 
@@ -559,18 +559,18 @@ msgstr "Zaciecie fil."
 msgid "F. runout"
 msgstr "Koniec fil."
 
-#. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:169 ../../Firmware/mmu2/errors_list.h:214
-msgid "FILAMENT ALREADY LOA"
+#. MSG_TITLE_FILAMENT_ALREADY_LOADED c=20
+#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:225
+msgid "FIL. ALREADY LOADED"
 msgstr "FILAMENT JUZ ZALAD."
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:135 ../../Firmware/mmu2/errors_list.h:178
+#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:189
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA NIE WLACZONA"
 
-#. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:277
+#. MSG_DESC_FINDA_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:293
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -580,7 +580,7 @@ msgstr ""
 "dziala."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:225 ../../Firmware/mmu2/errors_list.h:276
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:292
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -588,10 +588,10 @@ msgstr ""
 "FINDA nie uruchamia sie podczas ladowania filamentu. Upewnij sie, ze "
 "filament moze sie poruszac i FINDA dziala."
 
-#. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:179
-msgid "FINDA: FILAM. STUCK"
-msgstr "FINDA: FIL. ZABLOK."
+#. MSG_TITLE_FINDA_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:190
+msgid "FINDA FILAM. STUCK"
+msgstr "FINDA FIL. ZABLOK."
 
 #. MSG_FS_ACTION c=10
 #: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:4048
@@ -600,22 +600,22 @@ msgid "FS Action"
 msgstr "Akcja FS"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:191
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSENSOR NIE WLACZ."
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:194
 msgid "FSENSOR TOO EARLY"
 msgstr "FSENSOR ZBYT WCZESN."
 
-#. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:181
-msgid "FSENSOR: FIL. STUCK"
-msgstr "FSENSOR: FIL. ZABLOK"
+#. MSG_TITLE_FSENSOR_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:192
+msgid "FSENSOR FIL. STUCK"
+msgstr "FSENSOR FIL. ZABLOK"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:218
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:229
 msgid "FW RUNTIME ERROR"
 msgstr "BLAD DZIALANIA FW"
 
@@ -714,8 +714,8 @@ msgstr "Fil. nie zaladowany"
 msgid "Filament sensor"
 msgstr "Czujnik filamentu"
 
-#. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:279
+#. MSG_DESC_FSENSOR_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:295
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -724,16 +724,16 @@ msgstr ""
 "Sprawdz, czy filament moze sie poruszac i czy czujnik dziala."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:278
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:294
 msgid ""
-"Filament sensor didn't trigger while loading the filament. Ensure the "
-"filament reached the fsensor and the sensor works."
+"Filament sensor didn't trigger while loading the filament. Ensure the sensor"
+" is calibrated and the filament reached it."
 msgstr ""
 "Czujnik filamentu nie zadzialal podczas ladowania filamentu. Sprawdz, czy "
 "filament dotarl do czujnika i czy czujnik dziala."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:281
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:297
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -860,7 +860,7 @@ msgid "Heating"
 msgstr "Grzanie..."
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9272
+#: ../../Firmware/Marlin_main.cpp:9274
 msgid "Heating disabled by safety timer."
 msgstr "Grzanie wylaczone przez wyl. czasowy"
 
@@ -924,22 +924,22 @@ msgid "I will run z calibration now."
 msgstr "Przeprowadze kalibracje Z."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:199
 msgid "IDLER CANNOT HOME"
 msgstr "DOCISK NIE BAZUJE"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:200
 msgid "IDLER CANNOT MOVE"
 msgstr "DOCISK NIE RUSZA SIE"
 
 #. MSG_TITLE_INSPECT_FINDA c=20
-#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:195
 msgid "INSPECT FINDA"
 msgstr "SPRAWDŹ FINDA"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:215
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:226
 msgid "INVALID TOOL"
 msgstr "BLEDNE NARZEDZIE"
 
@@ -982,7 +982,7 @@ msgstr ""
 "pokretlo."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:278 ../../Firmware/mmu2/errors_list.h:332
 msgid ""
 "Internal runtime error. Try resetting the MMU or updating the firmware."
 msgstr "Wewnetrzny blad dzialania. Resetuj MMU lub zaktualizuj FW."
@@ -1101,12 +1101,12 @@ msgid "Loud"
 msgstr "Glosny"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:217
+#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:228
 msgid "MMU FW UPDATE NEEDED"
 msgstr "MMU FW WYMAGA AKTUAL"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:262 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:277 ../../Firmware/mmu2/errors_list.h:330
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "Blad wewnetrzny MMU FW, zresetuj MMU."
 
@@ -1116,7 +1116,7 @@ msgid "MMU Mode"
 msgstr "Tryb MMU"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:212
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:223
 msgid "MMU NOT RESPONDING"
 msgstr "MMU NIE ODPOWIADA"
 
@@ -1126,8 +1126,8 @@ msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU wznaw. Nagrzewanie..."
 
 #. MSG_TITLE_SELFTEST_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:165 ../../Firmware/mmu2/errors_list.h:208
-#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:220 ../../Firmware/mmu2/errors_list.h:221
 msgid "MMU SELFTEST FAILED"
 msgstr "MMU BLAD SELFTEST"
 
@@ -1144,12 +1144,12 @@ msgid "MMU load fails"
 msgstr "Bledy lad. MMU"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:311
+#: ../../Firmware/mmu2/errors_list.h:274 ../../Firmware/mmu2/errors_list.h:327
 msgid "MMU not responding correctly. Check the wiring and connectors."
 msgstr "MMU nie dziala. Sprawdz okablowanie i zlacza."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:258 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:326
 msgid "MMU not responding. Check the wiring and connectors."
 msgstr "MMU nie reaguje. Sprawdz okablowanie i zlacza."
 
@@ -1217,18 +1217,18 @@ msgid "Model"
 msgstr "Model"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:288
-#: ../../Firmware/mmu2/errors_list.h:289 ../../Firmware/mmu2/errors_list.h:290
-#: ../../Firmware/mmu2/errors_list.h:291 ../../Firmware/mmu2/errors_list.h:292
-#: ../../Firmware/mmu2/errors_list.h:293 ../../Firmware/mmu2/errors_list.h:294
-#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:296
-#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:298
-#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:300
-#: ../../Firmware/mmu2/errors_list.h:301 ../../Firmware/mmu2/errors_list.h:302
-#: ../../Firmware/mmu2/errors_list.h:303 ../../Firmware/mmu2/errors_list.h:304
+#: ../../Firmware/mmu2/errors_list.h:250 ../../Firmware/mmu2/errors_list.h:304
 #: ../../Firmware/mmu2/errors_list.h:305 ../../Firmware/mmu2/errors_list.h:306
 #: ../../Firmware/mmu2/errors_list.h:307 ../../Firmware/mmu2/errors_list.h:308
-#: ../../Firmware/mmu2/errors_list.h:309
+#: ../../Firmware/mmu2/errors_list.h:309 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:311 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:313 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:315 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:317 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:319 ../../Firmware/mmu2/errors_list.h:320
+#: ../../Firmware/mmu2/errors_list.h:321 ../../Firmware/mmu2/errors_list.h:322
+#: ../../Firmware/mmu2/errors_list.h:323 ../../Firmware/mmu2/errors_list.h:324
+#: ../../Firmware/mmu2/errors_list.h:325
 msgid "More details online."
 msgstr "Więcej szczegółów online."
 
@@ -1400,7 +1400,7 @@ msgid "Once"
 msgstr "1-raz"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9451 ../../Firmware/messages.cpp:175
+#: ../../Firmware/Marlin_main.cpp:9453 ../../Firmware/messages.cpp:175
 msgid "PAUSED THERMAL ERROR"
 msgstr "PAUZA BLAD TERMICZNY"
 
@@ -1447,7 +1447,7 @@ msgstr ""
 " -> Kalib. PINDA"
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:193
 msgid "PULLEY CANNOT MOVE"
 msgstr "RADELKO NIE RUSZA"
 
@@ -1544,7 +1544,7 @@ msgid "Please place steel sheet on heatbed."
 msgstr "Umiescic plyte stalowa na stole podgrzewanym."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11208 ../../Firmware/Marlin_main.cpp:11238
+#: ../../Firmware/Marlin_main.cpp:11210 ../../Firmware/Marlin_main.cpp:11240
 #: ../../Firmware/messages.cpp:79
 msgid "Please press the knob to unload filament"
 msgstr "Nacisnij pokretlo aby rozladowac filament"
@@ -1641,7 +1641,7 @@ msgid "Press the knob"
 msgstr "Wcisnij pokretlo"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11220
+#: ../../Firmware/Marlin_main.cpp:11222
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Wcisnij pokretlo aby rozgrzac dysze i kontynuowac."
 
@@ -1699,8 +1699,8 @@ msgstr ""
 "Srednica dyszy rozni sie od tej w G-code. Sprawdz ustawienia. Druk "
 "anulowany."
 
-#. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:280
+#. MSG_DESC_PULLEY_CANNOT_MOVE c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:296
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 "Silnik kola radelkowanego utknal. Upewnij sie, ze kolo moze sie poruszac i "
@@ -1713,7 +1713,7 @@ msgid "Pushing filament"
 msgstr "Wsuwanie filamentu"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:171 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:181 ../../Firmware/mmu2/errors_list.h:227
 msgid "QUEUE FULL"
 msgstr "KOLEJKA PELNA"
 
@@ -1728,7 +1728,7 @@ msgid "Rear side [µm]"
 msgstr "Tyl [µm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10598
+#: ../../Firmware/Marlin_main.cpp:10600
 msgid "Recovering print"
 msgstr "Wznawianie wydruku"
 
@@ -1743,7 +1743,7 @@ msgid "Rename"
 msgstr "Zmien nazwe"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:313
+#: ../../Firmware/mmu2/errors_list.h:276 ../../Firmware/mmu2/errors_list.h:329
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1780,7 +1780,7 @@ msgid "Retract from FINDA"
 msgstr "Wycof, z FINDY"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:329 ../../Firmware/mmu2/errors_list.h:339
+#: ../../Firmware/mmu2/errors_list.h:346 ../../Firmware/mmu2/errors_list.h:356
 msgid "Retry"
 msgstr "Ponow"
 
@@ -1816,17 +1816,17 @@ msgid "SD card"
 msgstr "Karta SD"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:197
 msgid "SELECTOR CANNOT HOME"
 msgstr "WYBIERAK NIE BAZUJE"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:198
 msgid "SELECTOR CANNOT MOVE"
 msgstr "WYBIERAK NIE RUSZA"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9477 ../../Firmware/messages.cpp:114
+#: ../../Firmware/Marlin_main.cpp:9479 ../../Firmware/messages.cpp:114
 msgid "STOPPED."
 msgstr "ZATRZYMANO."
 
@@ -2042,7 +2042,7 @@ msgid "Steel sheets"
 msgstr "Plyty stalowe"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:333 ../../Firmware/mmu2/errors_list.h:343
+#: ../../Firmware/mmu2/errors_list.h:350 ../../Firmware/mmu2/errors_list.h:360
 msgid "Stop"
 msgstr "Stop"
 
@@ -2069,37 +2069,37 @@ msgid "Swapped"
 msgstr "Zamieniono"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2233
+#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2236
 msgid "THERMAL ANOMALY"
 msgstr "THERMAL ANOMALY"
 
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:196
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:198
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:209
 msgid "TMC DRIVER ERROR"
 msgstr "BLAD STEROW. TMC"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:199
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:212
 msgid "TMC DRIVER RESET"
 msgstr "RESET STEROW. TMC"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:162 ../../Firmware/mmu2/errors_list.h:205
-#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:218
 msgid "TMC DRIVER SHORTED"
 msgstr "ZWARCIE STEROW. TMC"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:193
-#: ../../Firmware/mmu2/errors_list.h:194 ../../Firmware/mmu2/errors_list.h:195
+#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:206
 msgid "TMC OVERHEAT ERROR"
 msgstr "PRZEGRZANIE TMC"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:202
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:164 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:214 ../../Firmware/mmu2/errors_list.h:215
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "ZA NIS. NAPIECIE TMC"
 
@@ -2133,7 +2133,7 @@ msgid "Testing filament"
 msgstr "Test filamentu"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:286
+#: ../../Firmware/mmu2/errors_list.h:248 ../../Firmware/mmu2/errors_list.h:302
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2141,7 +2141,7 @@ msgstr ""
 "ruchu."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:284
+#: ../../Firmware/mmu2/errors_list.h:245 ../../Firmware/mmu2/errors_list.h:300
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2206,12 +2206,12 @@ msgid "Tune"
 msgstr "Strojenie"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:184 ../../Firmware/mmu2/errors_list.h:230
 msgid "UNLOAD MANUALLY"
 msgstr "ROZLAD. RECZNIE"
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:332 ../../Firmware/mmu2/errors_list.h:342
+#: ../../Firmware/mmu2/errors_list.h:349 ../../Firmware/mmu2/errors_list.h:359
 msgid "Unload"
 msgstr "Rozladuj"
 
@@ -2251,8 +2251,8 @@ msgid "Voltages"
 msgstr "Napiecia"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:190
-#: ../../Firmware/mmu2/errors_list.h:191 ../../Firmware/mmu2/errors_list.h:192
+#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:203
 msgid "WARNING TMC TOO HOT"
 msgstr "UWAGA TMC ZA GORACY"
 
@@ -2459,12 +2459,12 @@ msgid "MMU power fails"
 msgstr "Zaniki zas. MMU"
 
 #. MSG_TITLE_FILAMENT_EJECTED c=20
-#: ../../Firmware/mmu2/errors_list.h:175 ../../Firmware/mmu2/errors_list.h:220
+#: ../../Firmware/mmu2/errors_list.h:185 ../../Firmware/mmu2/errors_list.h:231
 msgid "FILAMENT EJECTED"
 msgstr "WYSUNIĘTY FILAMENT"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:264 ../../Firmware/mmu2/errors_list.h:317
+#: ../../Firmware/mmu2/errors_list.h:279 ../../Firmware/mmu2/errors_list.h:333
 msgid ""
 "Filament detected unexpectedly. Ensure no filament is loaded. Check the "
 "sensors and wiring."
@@ -2473,12 +2473,12 @@ msgstr ""
 "Sprawdź czujniki i okablowanie."
 
 #. MSG_TITLE_LOAD_TO_EXTRUDER_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:196
 msgid "LOAD TO EXTR. FAILED"
 msgstr "PRZEGRZ. ŁADOW EXTR."
 
 #. MSG_DESC_LOAD_TO_EXTRUDER_FAILED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:283
+#: ../../Firmware/mmu2/errors_list.h:244 ../../Firmware/mmu2/errors_list.h:299
 msgid ""
 "Loading to extruder failed. Inspect the filament tip shape. Refine the "
 "sensor calibration, if needed."
@@ -2486,10 +2486,10 @@ msgstr ""
 "Ładowanie do ekstrudera nie powiodło się. Sprawdź kształt końcówki "
 "filamentu. W razie potrzeby doprecyzuj kalibrację czujnika."
 
-#. MSG_TITLE_MCU_UNDERVOLTAGE_VCC c=20
-#: ../../Firmware/mmu2/errors_list.h:166 ../../Firmware/mmu2/errors_list.h:211
-msgid "MCU UNDERVOLTAGE VCC"
-msgstr "MCU POD NAPIĘCI. VCC"
+#. MSG_TITLE_MCU_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:222
+msgid "MMU MCU ERROR"
+msgstr "MMU MCU BLAD"
 
 #. MSG_MATERIAL_CHANGES c=18
 #: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:1095
@@ -2498,32 +2498,31 @@ msgid "Material changes"
 msgstr "Wymiany materiałów"
 
 #. MSG_DESC_FILAMENT_EJECTED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:280 ../../Firmware/mmu2/errors_list.h:334
 msgid "Remove the ejected filament from the front of the MMU."
 msgstr "Usuń wyrzucony filament z przodu MMU."
 
-#. MSG_BTN_RESTART_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:331 ../../Firmware/mmu2/errors_list.h:341
-msgid "RstMMU"
-msgstr "RstMMU"
+#. MSG_BTN_RESET_MMU c=8
+#: ../../Firmware/mmu2/errors_list.h:348 ../../Firmware/mmu2/errors_list.h:358
+msgid "ResetMMU"
+msgstr "ResetMMU"
 
 #. MSG_DESC_INSPECT_FINDA c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:282
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:298
 msgid ""
 "Selector can't move due to FINDA detecting a filament. Make sure no filament"
-" is in selector and FINDA works properly."
+" is in Selector and FINDA works properly."
 msgstr ""
 "Selektor nie może się poruszyć, ponieważ program FINDA wykrył żarnik. "
 "Upewnij się, że w selektorze nie ma filamentu i że FINDA działa prawidłowo."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:268 ../../Firmware/mmu2/errors_list.h:315
+#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:331
 msgid ""
-"The MMU firmware version incompatible with the printer's FW. Update to "
-"version 2.1.9."
+"MMU FW version is incompatible with printer FW.Update to version 3.0.0."
 msgstr ""
 "Wersja oprogramowania układowego MMU jest niezgodna z oprogramowaniem "
-"sprzętowym drukarki. Zaktualizuj do wersji 2.1.9."
+"sprzętowym drukarki. Zaktualizuj do wersji 3.0.0."
 
 #. MSG_PRELOAD_TO_MMU c=17
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5231
@@ -2538,6 +2537,16 @@ msgstr "Wykryto firmware MK3 w drukarce MK3S"
 msgid "MK3S firmware detected on MK3 printer"
 msgstr "Wykryto firmware MK3S w drukarce MK3"
 
+#. MSG_TITLE_UNKNOWN_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:232
+msgid "UNKNOWN ERROR"
+msgstr "NIEZNANY BŁĄD"
+
+#. MSG_DESC_UNKNOWN_ERROR c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:335
+msgid "Unexpected error occurred."
+msgstr "Pojawił się nieoczekiwany błąd."
+
 #~ msgid "XFLASH init"
 #~ msgstr "XFLASH init"
 

lang/po/Firmware_ro.po

@@ -200,7 +200,7 @@ msgid "Brightness"
 msgstr "Luminozitate ecran"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:178 ../../Firmware/mmu2/errors_list.h:224
 msgid "COMMUNICATION ERROR"
 msgstr "EROARE DE COMUNICARE"
 
@@ -254,13 +254,13 @@ msgid "Calibration done"
 msgstr "Calibrare gata"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:234 ../../Firmware/mmu2/errors_list.h:285
-#: ../../Firmware/mmu2/errors_list.h:287
+#: ../../Firmware/mmu2/errors_list.h:246 ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2/errors_list.h:303
 msgid "Can't move Selector or Idler."
 msgstr "Select./Idler blocat"
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:260 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:328
 msgid ""
 "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
@@ -422,7 +422,7 @@ msgid "Dim"
 msgstr "Minim"
 
 #. MSG_BTN_DISABLE_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:334 ../../Firmware/mmu2/errors_list.h:344
+#: ../../Firmware/mmu2/errors_list.h:351 ../../Firmware/mmu2/errors_list.h:361
 msgid "Disable"
 msgstr "Dezactiv"
 
@@ -459,7 +459,7 @@ msgstr ""
 "suprafata de print?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:330 ../../Firmware/mmu2/errors_list.h:340
+#: ../../Firmware/mmu2/errors_list.h:347 ../../Firmware/mmu2/errors_list.h:357
 msgid "Done"
 msgstr "Gata"
 
@@ -560,18 +560,18 @@ msgstr "F. blocaj det"
 msgid "F. runout"
 msgstr "Fil. epuizat"
 
-#. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:169 ../../Firmware/mmu2/errors_list.h:214
-msgid "FILAMENT ALREADY LOA"
+#. MSG_TITLE_FILAMENT_ALREADY_LOADED c=20
+#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:225
+msgid "FIL. ALREADY LOADED"
 msgstr "FILAM. DEJA INCARCAT"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:135 ../../Firmware/mmu2/errors_list.h:178
+#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:189
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA NU SA DECLANST"
 
-#. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:277
+#. MSG_DESC_FINDA_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:293
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -580,7 +580,7 @@ msgstr ""
 "ca FINDA functioneaza."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:225 ../../Firmware/mmu2/errors_list.h:276
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:292
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -588,10 +588,10 @@ msgstr ""
 "FINDA nu sa declansat in timpul incarcarii. Asigurativa ca filamentul se "
 "misca si FINDA functioneaza."
 
-#. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:179
-msgid "FINDA: FILAM. STUCK"
-msgstr "FINDA: FILAM. BLOCAT"
+#. MSG_TITLE_FINDA_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:190
+msgid "FINDA FILAM. STUCK"
+msgstr "FINDA FILAM. BLOCAT"
 
 #. MSG_FS_ACTION c=10
 #: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:4048
@@ -600,22 +600,22 @@ msgid "FS Action"
 msgstr "Actiune FS"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:191
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSENZ NU SA DECLASAT"
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:194
 msgid "FSENSOR TOO EARLY"
 msgstr "FSENSOR PREA DEVREME"
 
-#. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:181
-msgid "FSENSOR: FIL. STUCK"
-msgstr "FSENSOR: FIL. BLOCAT"
+#. MSG_TITLE_FSENSOR_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:192
+msgid "FSENSOR FIL. STUCK"
+msgstr "FSENSOR FIL. BLOCAT"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:218
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:229
 msgid "FW RUNTIME ERROR"
 msgstr "Eroare FW RUNTIME"
 
@@ -714,8 +714,8 @@ msgstr "Fil. nu e incarcat"
 msgid "Filament sensor"
 msgstr "Senz. de filament"
 
-#. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:279
+#. MSG_DESC_FSENSOR_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:295
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -724,16 +724,16 @@ msgstr ""
 "filamentul se misca si senzorul functioneaza."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:278
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:294
 msgid ""
-"Filament sensor didn't trigger while loading the filament. Ensure the "
-"filament reached the fsensor and the sensor works."
+"Filament sensor didn't trigger while loading the filament. Ensure the sensor"
+" is calibrated and the filament reached it."
 msgstr ""
 "Senzorul de filament nu s-a declansast in timpul incarcarii Fil. Asigurativa"
 " ca filamentul a ajuns la fsenzor si senzorul functioneaza."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:281
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:297
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -863,7 +863,7 @@ msgid "Heating"
 msgstr "Incalzire"
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9272
+#: ../../Firmware/Marlin_main.cpp:9274
 msgid "Heating disabled by safety timer."
 msgstr "Incalzirea dezactivata de timer-ul de siguranta"
 
@@ -927,22 +927,22 @@ msgid "I will run z calibration now."
 msgstr "Voi rula calibrarea Z acum."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:199
 msgid "IDLER CANNOT HOME"
 msgstr "IDLER NU REVINE"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:200
 msgid "IDLER CANNOT MOVE"
 msgstr "IDLER NU SE MISCA"
 
 #. MSG_TITLE_INSPECT_FINDA c=20
-#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:195
 msgid "INSPECT FINDA"
 msgstr "SPRAWDŹ FINDA"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:215
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:226
 msgid "INVALID TOOL"
 msgstr "INSTRUMENT INVALID"
 
@@ -983,7 +983,7 @@ msgid ""
 msgstr "Infige filamentul (nu-l incarca) in extruder si apasa butonul."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:278 ../../Firmware/mmu2/errors_list.h:332
 msgid ""
 "Internal runtime error. Try resetting the MMU or updating the firmware."
 msgstr ""
@@ -1103,12 +1103,12 @@ msgid "Loud"
 msgstr "Tare"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:217
+#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:228
 msgid "MMU FW UPDATE NEEDED"
 msgstr "MMU UPDATE NECESAR"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:262 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:277 ../../Firmware/mmu2/errors_list.h:330
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "Intermal MMU ERR, Va rog resetati MMU."
 
@@ -1118,7 +1118,7 @@ msgid "MMU Mode"
 msgstr "Mod MMU"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:212
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:223
 msgid "MMU NOT RESPONDING"
 msgstr "MMU NU RASPUNDE"
 
@@ -1128,8 +1128,8 @@ msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU: Restabilirea temperaturii..."
 
 #. MSG_TITLE_SELFTEST_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:165 ../../Firmware/mmu2/errors_list.h:208
-#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:220 ../../Firmware/mmu2/errors_list.h:221
 msgid "MMU SELFTEST FAILED"
 msgstr "MMU AUTOTEST. ESUATA"
 
@@ -1146,12 +1146,12 @@ msgid "MMU load fails"
 msgstr "Err. incarc MMU"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:311
+#: ../../Firmware/mmu2/errors_list.h:274 ../../Firmware/mmu2/errors_list.h:327
 msgid "MMU not responding correctly. Check the wiring and connectors."
 msgstr "MMU nu raspunde corect. Verificati cablajul si conectorii."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:258 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:326
 msgid "MMU not responding. Check the wiring and connectors."
 msgstr "MMU nu raspunde. Verificati cablajul si conectorii."
 
@@ -1219,18 +1219,18 @@ msgid "Model"
 msgstr "Model"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:288
-#: ../../Firmware/mmu2/errors_list.h:289 ../../Firmware/mmu2/errors_list.h:290
-#: ../../Firmware/mmu2/errors_list.h:291 ../../Firmware/mmu2/errors_list.h:292
-#: ../../Firmware/mmu2/errors_list.h:293 ../../Firmware/mmu2/errors_list.h:294
-#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:296
-#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:298
-#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:300
-#: ../../Firmware/mmu2/errors_list.h:301 ../../Firmware/mmu2/errors_list.h:302
-#: ../../Firmware/mmu2/errors_list.h:303 ../../Firmware/mmu2/errors_list.h:304
+#: ../../Firmware/mmu2/errors_list.h:250 ../../Firmware/mmu2/errors_list.h:304
 #: ../../Firmware/mmu2/errors_list.h:305 ../../Firmware/mmu2/errors_list.h:306
 #: ../../Firmware/mmu2/errors_list.h:307 ../../Firmware/mmu2/errors_list.h:308
-#: ../../Firmware/mmu2/errors_list.h:309
+#: ../../Firmware/mmu2/errors_list.h:309 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:311 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:313 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:315 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:317 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:319 ../../Firmware/mmu2/errors_list.h:320
+#: ../../Firmware/mmu2/errors_list.h:321 ../../Firmware/mmu2/errors_list.h:322
+#: ../../Firmware/mmu2/errors_list.h:323 ../../Firmware/mmu2/errors_list.h:324
+#: ../../Firmware/mmu2/errors_list.h:325
 msgid "More details online."
 msgstr "Mai multe detalii online"
 
@@ -1400,7 +1400,7 @@ msgid "Once"
 msgstr "O data"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9451 ../../Firmware/messages.cpp:175
+#: ../../Firmware/Marlin_main.cpp:9453 ../../Firmware/messages.cpp:175
 msgid "PAUSED THERMAL ERROR"
 msgstr "OPRIT THERMAL ERROR"
 
@@ -1447,7 +1447,7 @@ msgstr ""
 "meniul Setari->Cal. PINDA"
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:193
 msgid "PULLEY CANNOT MOVE"
 msgstr "PULLEY NU SE MISCA"
 
@@ -1546,7 +1546,7 @@ msgid "Please place steel sheet on heatbed."
 msgstr "Asezati suprafata de print pe pat."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11208 ../../Firmware/Marlin_main.cpp:11238
+#: ../../Firmware/Marlin_main.cpp:11210 ../../Firmware/Marlin_main.cpp:11240
 #: ../../Firmware/messages.cpp:79
 msgid "Please press the knob to unload filament"
 msgstr "Apasati butonul pentru a scoate filamentul."
@@ -1643,7 +1643,7 @@ msgid "Press the knob"
 msgstr "Apasati butonul"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11220
+#: ../../Firmware/Marlin_main.cpp:11222
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Apasati butonul pentru a preincalzi extruder-ul si continuati."
 
@@ -1701,8 +1701,8 @@ msgstr ""
 "Diametrul varfului diferă de cel din G-code. Va rugam verificati valoarea in"
 " setari. Print anulat."
 
-#. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:280
+#. MSG_DESC_PULLEY_CANNOT_MOVE c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:296
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 "Motorul Pully sa blocat. Asigurativa ca scripetele se poate misca si "
@@ -1715,7 +1715,7 @@ msgid "Pushing filament"
 msgstr "Introducere filament"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:171 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:181 ../../Firmware/mmu2/errors_list.h:227
 msgid "QUEUE FULL"
 msgstr "QUEUE PLIN"
 
@@ -1730,7 +1730,7 @@ msgid "Rear side [µm]"
 msgstr "Spate [µm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10598
+#: ../../Firmware/Marlin_main.cpp:10600
 msgid "Recovering print"
 msgstr "Recuperare print"
 
@@ -1745,7 +1745,7 @@ msgid "Rename"
 msgstr "Redenumeste"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:313
+#: ../../Firmware/mmu2/errors_list.h:276 ../../Firmware/mmu2/errors_list.h:329
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1782,7 +1782,7 @@ msgid "Retract from FINDA"
 msgstr "Retract de la FINDA"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:329 ../../Firmware/mmu2/errors_list.h:339
+#: ../../Firmware/mmu2/errors_list.h:346 ../../Firmware/mmu2/errors_list.h:356
 msgid "Retry"
 msgstr "Retry"
 
@@ -1818,17 +1818,17 @@ msgid "SD card"
 msgstr "Card SD"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:197
 msgid "SELECTOR CANNOT HOME"
 msgstr "SELECTOR NU REVINE"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:198
 msgid "SELECTOR CANNOT MOVE"
 msgstr "SELECTOR NU SE MISCA"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9477 ../../Firmware/messages.cpp:114
+#: ../../Firmware/Marlin_main.cpp:9479 ../../Firmware/messages.cpp:114
 msgid "STOPPED."
 msgstr "OPRIT."
 
@@ -2044,7 +2044,7 @@ msgid "Steel sheets"
 msgstr "Suprafete print"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:333 ../../Firmware/mmu2/errors_list.h:343
+#: ../../Firmware/mmu2/errors_list.h:350 ../../Firmware/mmu2/errors_list.h:360
 msgid "Stop"
 msgstr "Stop"
 
@@ -2071,37 +2071,37 @@ msgid "Swapped"
 msgstr "inversate"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2233
+#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2236
 msgid "THERMAL ANOMALY"
 msgstr "ANOMALIE TERMICA"
 
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:196
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:198
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:209
 msgid "TMC DRIVER ERROR"
 msgstr "Eroare driver TMC"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:199
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:212
 msgid "TMC DRIVER RESET"
 msgstr "Reset driver TMC"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:162 ../../Firmware/mmu2/errors_list.h:205
-#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:218
 msgid "TMC DRIVER SHORTED"
 msgstr "DRIVER TMC IN SCURT"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:193
-#: ../../Firmware/mmu2/errors_list.h:194 ../../Firmware/mmu2/errors_list.h:195
+#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:206
 msgid "TMC OVERHEAT ERROR"
 msgstr "ERR TMC supraincalz."
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:202
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:164 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:214 ../../Firmware/mmu2/errors_list.h:215
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "ERR subtensiune TMC"
 
@@ -2135,7 +2135,7 @@ msgid "Testing filament"
 msgstr "Testare filament"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:286
+#: ../../Firmware/mmu2/errors_list.h:248 ../../Firmware/mmu2/errors_list.h:302
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2143,7 +2143,7 @@ msgstr ""
 "miscarea."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:284
+#: ../../Firmware/mmu2/errors_list.h:245 ../../Firmware/mmu2/errors_list.h:300
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2207,12 +2207,12 @@ msgid "Tune"
 msgstr "Optiuni"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:184 ../../Firmware/mmu2/errors_list.h:230
 msgid "UNLOAD MANUALLY"
 msgstr "DESCARCARE MANUALA"
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:332 ../../Firmware/mmu2/errors_list.h:342
+#: ../../Firmware/mmu2/errors_list.h:349 ../../Firmware/mmu2/errors_list.h:359
 msgid "Unload"
 msgstr "Unload"
 
@@ -2252,8 +2252,8 @@ msgid "Voltages"
 msgstr "Voltaje"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:190
-#: ../../Firmware/mmu2/errors_list.h:191 ../../Firmware/mmu2/errors_list.h:192
+#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:203
 msgid "WARNING TMC TOO HOT"
 msgstr "TMC SUPRAINCALZIT"
 
@@ -2462,12 +2462,12 @@ msgid "MMU power fails"
 msgstr "Err. MMU curent"
 
 #. MSG_TITLE_FILAMENT_EJECTED c=20
-#: ../../Firmware/mmu2/errors_list.h:175 ../../Firmware/mmu2/errors_list.h:220
+#: ../../Firmware/mmu2/errors_list.h:185 ../../Firmware/mmu2/errors_list.h:231
 msgid "FILAMENT EJECTED"
 msgstr "FILAMENT EJECTAT"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:264 ../../Firmware/mmu2/errors_list.h:317
+#: ../../Firmware/mmu2/errors_list.h:279 ../../Firmware/mmu2/errors_list.h:333
 msgid ""
 "Filament detected unexpectedly. Ensure no filament is loaded. Check the "
 "sensors and wiring."
@@ -2476,12 +2476,12 @@ msgstr ""
 " filament. Verificați senzorii și cablajul."
 
 #. MSG_TITLE_LOAD_TO_EXTRUDER_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:196
 msgid "LOAD TO EXTR. FAILED"
 msgstr "A REUSIT ÎNCAR EXTR."
 
 #. MSG_DESC_LOAD_TO_EXTRUDER_FAILED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:283
+#: ../../Firmware/mmu2/errors_list.h:244 ../../Firmware/mmu2/errors_list.h:299
 msgid ""
 "Loading to extruder failed. Inspect the filament tip shape. Refine the "
 "sensor calibration, if needed."
@@ -2489,10 +2489,10 @@ msgstr ""
 "Încărcarea în extruder nu a reușit. Inspectați forma vârfului filamentului. "
 "Rafinați calibrarea senzorului, dacă este necesar."
 
-#. MSG_TITLE_MCU_UNDERVOLTAGE_VCC c=20
-#: ../../Firmware/mmu2/errors_list.h:166 ../../Firmware/mmu2/errors_list.h:211
-msgid "MCU UNDERVOLTAGE VCC"
-msgstr "MCU SUBTENSIUNE VCC"
+#. MSG_TITLE_MCU_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:222
+msgid "MMU MCU ERROR"
+msgstr "MMU: EROARE MCU"
 
 #. MSG_MATERIAL_CHANGES c=18
 #: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:1095
@@ -2501,33 +2501,32 @@ msgid "Material changes"
 msgstr "Schimburi material"
 
 #. MSG_DESC_FILAMENT_EJECTED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:280 ../../Firmware/mmu2/errors_list.h:334
 msgid "Remove the ejected filament from the front of the MMU."
 msgstr "Scoateți filamentul ejectat din partea din față a MMU."
 
-#. MSG_BTN_RESTART_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:331 ../../Firmware/mmu2/errors_list.h:341
-msgid "RstMMU"
-msgstr "RstMMU"
+#. MSG_BTN_RESET_MMU c=8
+#: ../../Firmware/mmu2/errors_list.h:348 ../../Firmware/mmu2/errors_list.h:358
+msgid "ResetMMU"
+msgstr "ResetMMU"
 
 #. MSG_DESC_INSPECT_FINDA c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:282
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:298
 msgid ""
 "Selector can't move due to FINDA detecting a filament. Make sure no filament"
-" is in selector and FINDA works properly."
+" is in Selector and FINDA works properly."
 msgstr ""
 "Selectorul nu se poate mișca deoarece FINDA detectează un filament. "
 "Asigurați-vă că nu există filament în selector și că FINDA funcționează "
 "corect."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:268 ../../Firmware/mmu2/errors_list.h:315
+#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:331
 msgid ""
-"The MMU firmware version incompatible with the printer's FW. Update to "
-"version 2.1.9."
+"MMU FW version is incompatible with printer FW.Update to version 3.0.0."
 msgstr ""
 "Versiunea de firmware a MMU este incompatibilă cu FW-ul imprimantei. "
-"Actualizați la versiunea 2.1.9."
+"Actualizați la versiunea 3.0.0."
 
 #. MSG_PRELOAD_TO_MMU c=17
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5231
@@ -2542,6 +2541,16 @@ msgstr "Firmware MK3 detectat pe imprimanta MK3S"
 msgid "MK3S firmware detected on MK3 printer"
 msgstr "Firmware MK3S detectat pe imprimanta MK3"
 
+#. MSG_TITLE_UNKNOWN_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:232
+msgid "UNKNOWN ERROR"
+msgstr "EROARE NECUNOSCUTĂ"
+
+#. MSG_DESC_UNKNOWN_ERROR c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:335
+msgid "Unexpected error occurred."
+msgstr "A apărut o eroare neașteptată."
+
 #~ msgid "XFLASH init"
 #~ msgstr "Init XFLASH"
 

lang/po/Firmware_sk.po

@@ -198,7 +198,7 @@ msgid "Brightness"
 msgstr "Podsvietenie"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:178 ../../Firmware/mmu2/errors_list.h:224
 msgid "COMMUNICATION ERROR"
 msgstr "COMMUNICATION ERROR"
 
@@ -252,13 +252,13 @@ msgid "Calibration done"
 msgstr "Kalibracia OK"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:234 ../../Firmware/mmu2/errors_list.h:285
-#: ../../Firmware/mmu2/errors_list.h:287
+#: ../../Firmware/mmu2/errors_list.h:246 ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2/errors_list.h:303
 msgid "Can't move Selector or Idler."
 msgstr "Selektor alebo Idler nie je mozne presunut."
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:260 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:328
 msgid ""
 "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
@@ -419,7 +419,7 @@ msgid "Dim"
 msgstr "Tmavy"
 
 #. MSG_BTN_DISABLE_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:334 ../../Firmware/mmu2/errors_list.h:344
+#: ../../Firmware/mmu2/errors_list.h:351 ../../Firmware/mmu2/errors_list.h:361
 msgid "Disable"
 msgstr "Vypnut"
 
@@ -456,7 +456,7 @@ msgstr ""
 "podlozkou?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:330 ../../Firmware/mmu2/errors_list.h:340
+#: ../../Firmware/mmu2/errors_list.h:347 ../../Firmware/mmu2/errors_list.h:357
 msgid "Done"
 msgstr "Hotov"
 
@@ -557,18 +557,18 @@ msgstr "F. zasek"
 msgid "F. runout"
 msgstr "F. vypadok"
 
-#. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:169 ../../Firmware/mmu2/errors_list.h:214
-msgid "FILAMENT ALREADY LOA"
-msgstr "FILAMENT ALREADY LOA"
+#. MSG_TITLE_FILAMENT_ALREADY_LOADED c=20
+#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:225
+msgid "FIL. ALREADY LOADED"
+msgstr "FIL. ALREADY LOADED"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:135 ../../Firmware/mmu2/errors_list.h:178
+#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:189
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA DIDNT TRIGGER"
 
-#. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:277
+#. MSG_DESC_FINDA_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:293
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -577,7 +577,7 @@ msgstr ""
 "ze filament sa moze hybat a FINDA funguje."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:225 ../../Firmware/mmu2/errors_list.h:276
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:292
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -585,10 +585,10 @@ msgstr ""
 "FINDA sa nezopol pocas zavedenia filamentu. Uiste sa, ze FINDA funguje "
 "spravne."
 
-#. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:179
-msgid "FINDA: FILAM. STUCK"
-msgstr "FINDA: FILAM. STUCK"
+#. MSG_TITLE_FINDA_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:190
+msgid "FINDA FILAM. STUCK"
+msgstr "FINDA FILAM. STUCK"
 
 #. MSG_FS_ACTION c=10
 #: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:4048
@@ -597,22 +597,22 @@ msgid "FS Action"
 msgstr "FS Akcia"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:191
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSENSOR DIDNT TRIGG."
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:194
 msgid "FSENSOR TOO EARLY"
 msgstr "FSENSOR TOO EARLY"
 
-#. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:181
-msgid "FSENSOR: FIL. STUCK"
-msgstr "FSENSOR: FIL. STUCK"
+#. MSG_TITLE_FSENSOR_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:192
+msgid "FSENSOR FIL. STUCK"
+msgstr "FSENSOR FIL. STUCK"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:218
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:229
 msgid "FW RUNTIME ERROR"
 msgstr "FW RUNTIME ERROR"
 
@@ -711,8 +711,8 @@ msgstr "Filament nezavedeny"
 msgid "Filament sensor"
 msgstr "Senzor filamentu"
 
-#. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:279
+#. MSG_DESC_FSENSOR_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:295
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -721,16 +721,16 @@ msgstr ""
 "filament moze hybat a senzor funguje spravne."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:278
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:294
 msgid ""
-"Filament sensor didn't trigger while loading the filament. Ensure the "
-"filament reached the fsensor and the sensor works."
+"Filament sensor didn't trigger while loading the filament. Ensure the sensor"
+" is calibrated and the filament reached it."
 msgstr ""
 "Senzor filamentu sa nezopol pocas zavedenia filamentu. Skontrolujte, ze "
 "filament dosiahol fsenzor a senzor funguje  spravne."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:281
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:297
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -859,7 +859,7 @@ msgid "Heating"
 msgstr "Zahrievanie"
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9272
+#: ../../Firmware/Marlin_main.cpp:9274
 msgid "Heating disabled by safety timer."
 msgstr "Zohrievanie prerusene bezpecnostnym casovacom."
 
@@ -922,22 +922,22 @@ msgid "I will run z calibration now."
 msgstr "Teraz urobim kalibraciu Z."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:199
 msgid "IDLER CANNOT HOME"
 msgstr "IDLER CANNOT HOME"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:200
 msgid "IDLER CANNOT MOVE"
 msgstr "IDLER CANNOT MOVE"
 
 #. MSG_TITLE_INSPECT_FINDA c=20
-#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:195
 msgid "INSPECT FINDA"
 msgstr "KONTROLA FINDA"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:215
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:226
 msgid "INVALID TOOL"
 msgstr "INVALID TOOL"
 
@@ -978,7 +978,7 @@ msgid ""
 msgstr "Vlozte filament (nezavadzajte) do extruderu a stlacte tlacidlo"
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:278 ../../Firmware/mmu2/errors_list.h:332
 msgid ""
 "Internal runtime error. Try resetting the MMU or updating the firmware."
 msgstr "Interna chyba. Skuste resetovat MMU alebo aktualizovat firmware."
@@ -1097,12 +1097,12 @@ msgid "Loud"
 msgstr "Hlasny"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:217
+#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:228
 msgid "MMU FW UPDATE NEEDED"
 msgstr "MMU FW UPDATE NEEDED"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:262 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:277 ../../Firmware/mmu2/errors_list.h:330
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "Chyba MMU Firmwaru, resetujte MMU."
 
@@ -1112,7 +1112,7 @@ msgid "MMU Mode"
 msgstr "MMU mod"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:212
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:223
 msgid "MMU NOT RESPONDING"
 msgstr "MMU NOT RESPONDING"
 
@@ -1122,8 +1122,8 @@ msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU: Obnovenie teploty..."
 
 #. MSG_TITLE_SELFTEST_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:165 ../../Firmware/mmu2/errors_list.h:208
-#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:220 ../../Firmware/mmu2/errors_list.h:221
 msgid "MMU SELFTEST FAILED"
 msgstr "MMU SAMOTEST ZLYHAL"
 
@@ -1140,12 +1140,12 @@ msgid "MMU load fails"
 msgstr "MMU zlyhalo"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:311
+#: ../../Firmware/mmu2/errors_list.h:274 ../../Firmware/mmu2/errors_list.h:327
 msgid "MMU not responding correctly. Check the wiring and connectors."
 msgstr "MMU neodpoveda spravne.Skontrolujte zapojenie a konektory."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:258 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:326
 msgid "MMU not responding. Check the wiring and connectors."
 msgstr "MMU neodpoveda. Skontrolujte zapojenie a konektory."
 
@@ -1213,18 +1213,18 @@ msgid "Model"
 msgstr "Model"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:288
-#: ../../Firmware/mmu2/errors_list.h:289 ../../Firmware/mmu2/errors_list.h:290
-#: ../../Firmware/mmu2/errors_list.h:291 ../../Firmware/mmu2/errors_list.h:292
-#: ../../Firmware/mmu2/errors_list.h:293 ../../Firmware/mmu2/errors_list.h:294
-#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:296
-#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:298
-#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:300
-#: ../../Firmware/mmu2/errors_list.h:301 ../../Firmware/mmu2/errors_list.h:302
-#: ../../Firmware/mmu2/errors_list.h:303 ../../Firmware/mmu2/errors_list.h:304
+#: ../../Firmware/mmu2/errors_list.h:250 ../../Firmware/mmu2/errors_list.h:304
 #: ../../Firmware/mmu2/errors_list.h:305 ../../Firmware/mmu2/errors_list.h:306
 #: ../../Firmware/mmu2/errors_list.h:307 ../../Firmware/mmu2/errors_list.h:308
-#: ../../Firmware/mmu2/errors_list.h:309
+#: ../../Firmware/mmu2/errors_list.h:309 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:311 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:313 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:315 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:317 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:319 ../../Firmware/mmu2/errors_list.h:320
+#: ../../Firmware/mmu2/errors_list.h:321 ../../Firmware/mmu2/errors_list.h:322
+#: ../../Firmware/mmu2/errors_list.h:323 ../../Firmware/mmu2/errors_list.h:324
+#: ../../Firmware/mmu2/errors_list.h:325
 msgid "More details online."
 msgstr "Viac podrobnosti online."
 
@@ -1395,7 +1395,7 @@ msgid "Once"
 msgstr "Raz"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9451 ../../Firmware/messages.cpp:175
+#: ../../Firmware/Marlin_main.cpp:9453 ../../Firmware/messages.cpp:175
 msgid "PAUSED THERMAL ERROR"
 msgstr "PAUSED THERMAL ERROR"
 
@@ -1442,7 +1442,7 @@ msgstr ""
 "menu Nastavenia->PINDA kal."
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:193
 msgid "PULLEY CANNOT MOVE"
 msgstr "PULLEY CANNOT MOVE"
 
@@ -1541,7 +1541,7 @@ msgid "Please place steel sheet on heatbed."
 msgstr "Umiestnite prosim platnu na podlozku"
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11208 ../../Firmware/Marlin_main.cpp:11238
+#: ../../Firmware/Marlin_main.cpp:11210 ../../Firmware/Marlin_main.cpp:11240
 #: ../../Firmware/messages.cpp:79
 msgid "Please press the knob to unload filament"
 msgstr "Pre vysunutie filamentu stlacte tlacidlo"
@@ -1638,7 +1638,7 @@ msgid "Press the knob"
 msgstr "Stlacte tlacidlo"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11220
+#: ../../Firmware/Marlin_main.cpp:11222
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Pre nahriatie trysky a pokracovanie stlacte tlacidlo."
 
@@ -1696,8 +1696,8 @@ msgstr ""
 "Priemer trysky tlaciarne sa lisi od G-code. Prosim skontrolujte nastavenie. "
 "Tlac zrusena."
 
-#. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:280
+#. MSG_DESC_PULLEY_CANNOT_MOVE c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:296
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 "Motor remenice sa zasekol. Skontrolujte, ze sa remenica moze hybat a jej "
@@ -1710,7 +1710,7 @@ msgid "Pushing filament"
 msgstr "Tlacenie filamentu"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:171 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:181 ../../Firmware/mmu2/errors_list.h:227
 msgid "QUEUE FULL"
 msgstr "QUEUE FULL"
 
@@ -1725,7 +1725,7 @@ msgid "Rear side [µm]"
 msgstr "Zadna str.[µm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10598
+#: ../../Firmware/Marlin_main.cpp:10600
 msgid "Recovering print"
 msgstr "Obnovovanie tlace"
 
@@ -1740,7 +1740,7 @@ msgid "Rename"
 msgstr "Premenovat"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:313
+#: ../../Firmware/mmu2/errors_list.h:276 ../../Firmware/mmu2/errors_list.h:329
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1777,7 +1777,7 @@ msgid "Retract from FINDA"
 msgstr "Vybrat z FINDA"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:329 ../../Firmware/mmu2/errors_list.h:339
+#: ../../Firmware/mmu2/errors_list.h:346 ../../Firmware/mmu2/errors_list.h:356
 msgid "Retry"
 msgstr "Znova"
 
@@ -1813,17 +1813,17 @@ msgid "SD card"
 msgstr "SD karta"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:197
 msgid "SELECTOR CANNOT HOME"
 msgstr "SELECTOR CANNOT HOME"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:198
 msgid "SELECTOR CANNOT MOVE"
 msgstr "SELECTOR CANNOT MOVE"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9477 ../../Firmware/messages.cpp:114
+#: ../../Firmware/Marlin_main.cpp:9479 ../../Firmware/messages.cpp:114
 msgid "STOPPED."
 msgstr "ZASTAVENE."
 
@@ -2034,7 +2034,7 @@ msgid "Steel sheets"
 msgstr "Platne"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:333 ../../Firmware/mmu2/errors_list.h:343
+#: ../../Firmware/mmu2/errors_list.h:350 ../../Firmware/mmu2/errors_list.h:360
 msgid "Stop"
 msgstr "Zast."
 
@@ -2061,37 +2061,37 @@ msgid "Swapped"
 msgstr "Prehodene"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2233
+#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2236
 msgid "THERMAL ANOMALY"
 msgstr "THERMAL ANOMALY"
 
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:196
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:198
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:209
 msgid "TMC DRIVER ERROR"
 msgstr "TMC DRIVER ERROR"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:199
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:212
 msgid "TMC DRIVER RESET"
 msgstr "TMC DRIVER RESET"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:162 ../../Firmware/mmu2/errors_list.h:205
-#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:218
 msgid "TMC DRIVER SHORTED"
 msgstr "TMC DRIVER SHORTED"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:193
-#: ../../Firmware/mmu2/errors_list.h:194 ../../Firmware/mmu2/errors_list.h:195
+#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:206
 msgid "TMC OVERHEAT ERROR"
 msgstr "TMC OVERHEAT ERROR"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:202
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:164 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:214 ../../Firmware/mmu2/errors_list.h:215
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "TMC UNDERVOLTAGE ERR"
 
@@ -2125,7 +2125,7 @@ msgid "Testing filament"
 msgstr "Kontrola filamentu"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:286
+#: ../../Firmware/mmu2/errors_list.h:248 ../../Firmware/mmu2/errors_list.h:302
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2133,7 +2133,7 @@ msgstr ""
 "pohyb."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:284
+#: ../../Firmware/mmu2/errors_list.h:245 ../../Firmware/mmu2/errors_list.h:300
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2197,12 +2197,12 @@ msgid "Tune"
 msgstr "Ladit"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:184 ../../Firmware/mmu2/errors_list.h:230
 msgid "UNLOAD MANUALLY"
 msgstr "UNLOAD MANUALLY"
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:332 ../../Firmware/mmu2/errors_list.h:342
+#: ../../Firmware/mmu2/errors_list.h:349 ../../Firmware/mmu2/errors_list.h:359
 msgid "Unload"
 msgstr "Vysuv"
 
@@ -2242,8 +2242,8 @@ msgid "Voltages"
 msgstr "Napatie"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:190
-#: ../../Firmware/mmu2/errors_list.h:191 ../../Firmware/mmu2/errors_list.h:192
+#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:203
 msgid "WARNING TMC TOO HOT"
 msgstr "WARNING TMC TOO HOT"
 
@@ -2446,12 +2446,12 @@ msgid "MMU power fails"
 msgstr "MMU vyp. prudu"
 
 #. MSG_TITLE_FILAMENT_EJECTED c=20
-#: ../../Firmware/mmu2/errors_list.h:175 ../../Firmware/mmu2/errors_list.h:220
+#: ../../Firmware/mmu2/errors_list.h:185 ../../Firmware/mmu2/errors_list.h:231
 msgid "FILAMENT EJECTED"
 msgstr "FILAMENT VYSUNUTY"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:264 ../../Firmware/mmu2/errors_list.h:317
+#: ../../Firmware/mmu2/errors_list.h:279 ../../Firmware/mmu2/errors_list.h:333
 msgid ""
 "Filament detected unexpectedly. Ensure no filament is loaded. Check the "
 "sensors and wiring."
@@ -2460,12 +2460,12 @@ msgstr ""
 " Skontrolujte snímače a kabeláž."
 
 #. MSG_TITLE_LOAD_TO_EXTRUDER_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:196
 msgid "LOAD TO EXTR. FAILED"
 msgstr "ZLYHALO ZAVED. EXTR"
 
 #. MSG_DESC_LOAD_TO_EXTRUDER_FAILED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:283
+#: ../../Firmware/mmu2/errors_list.h:244 ../../Firmware/mmu2/errors_list.h:299
 msgid ""
 "Loading to extruder failed. Inspect the filament tip shape. Refine the "
 "sensor calibration, if needed."
@@ -2473,10 +2473,10 @@ msgstr ""
 "Zavedenie do extrudéra zlyhalo. Skontrolujte tvar konca filamentu. V prípade"
 " potreby upravte kalibráciu snímača."
 
-#. MSG_TITLE_MCU_UNDERVOLTAGE_VCC c=20
-#: ../../Firmware/mmu2/errors_list.h:166 ../../Firmware/mmu2/errors_list.h:211
-msgid "MCU UNDERVOLTAGE VCC"
-msgstr "MCU UNDERVOLTAGE VCC"
+#. MSG_TITLE_MCU_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:222
+msgid "MMU MCU ERROR"
+msgstr "MMU MCU CHYBA"
 
 #. MSG_MATERIAL_CHANGES c=18
 #: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:1095
@@ -2485,32 +2485,31 @@ msgid "Material changes"
 msgstr "Výmena materiálu"
 
 #. MSG_DESC_FILAMENT_EJECTED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:280 ../../Firmware/mmu2/errors_list.h:334
 msgid "Remove the ejected filament from the front of the MMU."
 msgstr "Odstráňte vysunutý filament z prednej časti MMU."
 
-#. MSG_BTN_RESTART_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:331 ../../Firmware/mmu2/errors_list.h:341
-msgid "RstMMU"
-msgstr "RstMMU"
+#. MSG_BTN_RESET_MMU c=8
+#: ../../Firmware/mmu2/errors_list.h:348 ../../Firmware/mmu2/errors_list.h:358
+msgid "ResetMMU"
+msgstr "ResetMMU"
 
 #. MSG_DESC_INSPECT_FINDA c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:282
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:298
 msgid ""
 "Selector can't move due to FINDA detecting a filament. Make sure no filament"
-" is in selector and FINDA works properly."
+" is in Selector and FINDA works properly."
 msgstr ""
 "Selektor sa nemôže pohybovať, pretože FINDA zistila filament. Uistite sa, že"
 " v selektore nie je žiadny filament a FINDA funguje správne."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:268 ../../Firmware/mmu2/errors_list.h:315
+#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:331
 msgid ""
-"The MMU firmware version incompatible with the printer's FW. Update to "
-"version 2.1.9."
+"MMU FW version is incompatible with printer FW.Update to version 3.0.0."
 msgstr ""
 "Verzia firmvéru MMU nie je kompatibilná s FW tlačiarne. Aktualizácia na "
-"verziu 2.1.9."
+"verziu 3.0.0."
 
 #. MSG_PRELOAD_TO_MMU c=17
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5231
@@ -2525,6 +2524,16 @@ msgstr "MK3 firmware na MK3S tlaciarni"
 msgid "MK3S firmware detected on MK3 printer"
 msgstr "MK3S firmware na MK3 tlaciarni"
 
+#. MSG_TITLE_UNKNOWN_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:232
+msgid "UNKNOWN ERROR"
+msgstr "NEZNÁMA CHYBA"
+
+#. MSG_DESC_UNKNOWN_ERROR c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:335
+msgid "Unexpected error occurred."
+msgstr "Vyskytla sa neočakávaná chyba."
+
 #~ msgid "XFLASH init"
 #~ msgstr "XFLASH init"
 

lang/po/Firmware_sv.po

@@ -199,7 +199,7 @@ msgid "Brightness"
 msgstr "Ljusstyrka"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:178 ../../Firmware/mmu2/errors_list.h:224
 msgid "COMMUNICATION ERROR"
 msgstr "KOMMUNIKATIONSFEL"
 
@@ -253,13 +253,13 @@ msgid "Calibration done"
 msgstr "Kalibraring utförd"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:234 ../../Firmware/mmu2/errors_list.h:285
-#: ../../Firmware/mmu2/errors_list.h:287
+#: ../../Firmware/mmu2/errors_list.h:246 ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2/errors_list.h:303
 msgid "Can't move Selector or Idler."
 msgstr "Kan inte flytta väljaren eller Idlern."
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:260 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:328
 msgid ""
 "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
@@ -420,7 +420,7 @@ msgid "Dim"
 msgstr "Dim"
 
 #. MSG_BTN_DISABLE_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:334 ../../Firmware/mmu2/errors_list.h:344
+#: ../../Firmware/mmu2/errors_list.h:351 ../../Firmware/mmu2/errors_list.h:361
 msgid "Disable"
 msgstr "Inaktiv."
 
@@ -457,7 +457,7 @@ msgstr ""
 "bädden?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:330 ../../Firmware/mmu2/errors_list.h:340
+#: ../../Firmware/mmu2/errors_list.h:347 ../../Firmware/mmu2/errors_list.h:357
 msgid "Done"
 msgstr "Klar"
 
@@ -558,18 +558,18 @@ msgstr "F.stopp skett"
 msgid "F. runout"
 msgstr "F. slut"
 
-#. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:169 ../../Firmware/mmu2/errors_list.h:214
-msgid "FILAMENT ALREADY LOA"
+#. MSG_TITLE_FILAMENT_ALREADY_LOADED c=20
+#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:225
+msgid "FIL. ALREADY LOADED"
 msgstr "F. REDAN INLADDAT"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:135 ../../Firmware/mmu2/errors_list.h:178
+#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:189
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA TRIGGADES EJ"
 
-#. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:277
+#. MSG_DESC_FINDA_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:293
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -578,7 +578,7 @@ msgstr ""
 "manuellt. Se till att filamentet kan röra sig och att FINDA fungerar."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:225 ../../Firmware/mmu2/errors_list.h:276
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:292
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -586,10 +586,10 @@ msgstr ""
 "FINDA triggades inte vid inladdning av filamment. Se till att filament kan "
 "röra sig och att FINDA fungerar."
 
-#. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:136 ../../Firmware/mmu2/errors_list.h:179
-msgid "FINDA: FILAM. STUCK"
-msgstr "FINDA: FILAM. STOPP"
+#. MSG_TITLE_FINDA_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:190
+msgid "FINDA FILAM. STUCK"
+msgstr "FINDA FILAM. STOPP"
 
 #. MSG_FS_ACTION c=10
 #: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:4048
@@ -598,22 +598,22 @@ msgid "FS Action"
 msgstr "FS aktion"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:191
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSENSOR TRIGGADE EJ."
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:194
 msgid "FSENSOR TOO EARLY"
 msgstr "FSENSOR FÖR TIDIG"
 
-#. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:138 ../../Firmware/mmu2/errors_list.h:181
-msgid "FSENSOR: FIL. STUCK"
-msgstr "FSENSOR: FIL. STOPP"
+#. MSG_TITLE_FSENSOR_FILAMENT_STUCK c=20
+#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:192
+msgid "FSENSOR FIL. STUCK"
+msgstr "FSENSOR FIL. STOPP"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:218
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:229
 msgid "FW RUNTIME ERROR"
 msgstr "FW RUNTIME FEL"
 
@@ -712,8 +712,8 @@ msgstr "Filament ej laddat"
 msgid "Filament sensor"
 msgstr "Filament sensor"
 
-#. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:279
+#. MSG_DESC_FSENSOR_FILAMENT_STUCK c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:295
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -722,16 +722,16 @@ msgstr ""
 "filamentet kan röra sig och att sensorn fungerar."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:278
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:294
 msgid ""
-"Filament sensor didn't trigger while loading the filament. Ensure the "
-"filament reached the fsensor and the sensor works."
+"Filament sensor didn't trigger while loading the filament. Ensure the sensor"
+" is calibrated and the filament reached it."
 msgstr ""
 "Filamentsensorn triggades inte av när filamentet laddades in.Se till att "
 "filamentet kan röra sig och att sensorn fungerar."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:281
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:297
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -861,7 +861,7 @@ msgid "Heating"
 msgstr "Uppvärmning"
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9272
+#: ../../Firmware/Marlin_main.cpp:9274
 msgid "Heating disabled by safety timer."
 msgstr "Uppvärmning avaktiverad av säkerhetstimer."
 
@@ -925,22 +925,22 @@ msgid "I will run z calibration now."
 msgstr "Jag kommer att utföra z-kalibrering nu."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:199
 msgid "IDLER CANNOT HOME"
 msgstr "IDLER HEMPOS FEL"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:200
 msgid "IDLER CANNOT MOVE"
 msgstr "IDLER KAN EJ FLYTTA"
 
 #. MSG_TITLE_INSPECT_FINDA c=20
-#: ../../Firmware/mmu2/errors_list.h:141 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:195
 msgid "INSPECT FINDA"
 msgstr "KONTROLLERA FINDA"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:215
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:226
 msgid "INVALID TOOL"
 msgstr "OGILTIGT VERKTYG"
 
@@ -983,7 +983,7 @@ msgstr ""
 "knappen."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:278 ../../Firmware/mmu2/errors_list.h:332
 msgid ""
 "Internal runtime error. Try resetting the MMU or updating the firmware."
 msgstr "Internt körtidsfel. Prova återställa MMU eller uppdatera firmware."
@@ -1102,12 +1102,12 @@ msgid "Loud"
 msgstr "Högt"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:217
+#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:228
 msgid "MMU FW UPDATE NEEDED"
 msgstr "MMU FW UPDATE KRÄVS"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:262 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:277 ../../Firmware/mmu2/errors_list.h:330
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "MMU Firmware internt fel, vänligen återställ MMU."
 
@@ -1117,7 +1117,7 @@ msgid "MMU Mode"
 msgstr "MMU-läge"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:212
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:223
 msgid "MMU NOT RESPONDING"
 msgstr "MMU SVARAR INTE"
 
@@ -1127,8 +1127,8 @@ msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU försök igen: Återställer temperatur..."
 
 #. MSG_TITLE_SELFTEST_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:165 ../../Firmware/mmu2/errors_list.h:208
-#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:172 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:220 ../../Firmware/mmu2/errors_list.h:221
 msgid "MMU SELFTEST FAILED"
 msgstr "MMU SJÄLVTEST FELADE"
 
@@ -1145,12 +1145,12 @@ msgid "MMU load fails"
 msgstr "MMU-laddn felar"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:311
+#: ../../Firmware/mmu2/errors_list.h:274 ../../Firmware/mmu2/errors_list.h:327
 msgid "MMU not responding correctly. Check the wiring and connectors."
 msgstr "MMU svarar inte korrekt. Kontrollera kablarna och kontakterna."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:258 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:326
 msgid "MMU not responding. Check the wiring and connectors."
 msgstr "MMU svarar inte. Kontrollera kablarna och kontakterna."
 
@@ -1218,18 +1218,18 @@ msgid "Model"
 msgstr "Modell"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:288
-#: ../../Firmware/mmu2/errors_list.h:289 ../../Firmware/mmu2/errors_list.h:290
-#: ../../Firmware/mmu2/errors_list.h:291 ../../Firmware/mmu2/errors_list.h:292
-#: ../../Firmware/mmu2/errors_list.h:293 ../../Firmware/mmu2/errors_list.h:294
-#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:296
-#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:298
-#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:300
-#: ../../Firmware/mmu2/errors_list.h:301 ../../Firmware/mmu2/errors_list.h:302
-#: ../../Firmware/mmu2/errors_list.h:303 ../../Firmware/mmu2/errors_list.h:304
+#: ../../Firmware/mmu2/errors_list.h:250 ../../Firmware/mmu2/errors_list.h:304
 #: ../../Firmware/mmu2/errors_list.h:305 ../../Firmware/mmu2/errors_list.h:306
 #: ../../Firmware/mmu2/errors_list.h:307 ../../Firmware/mmu2/errors_list.h:308
-#: ../../Firmware/mmu2/errors_list.h:309
+#: ../../Firmware/mmu2/errors_list.h:309 ../../Firmware/mmu2/errors_list.h:310
+#: ../../Firmware/mmu2/errors_list.h:311 ../../Firmware/mmu2/errors_list.h:312
+#: ../../Firmware/mmu2/errors_list.h:313 ../../Firmware/mmu2/errors_list.h:314
+#: ../../Firmware/mmu2/errors_list.h:315 ../../Firmware/mmu2/errors_list.h:316
+#: ../../Firmware/mmu2/errors_list.h:317 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:319 ../../Firmware/mmu2/errors_list.h:320
+#: ../../Firmware/mmu2/errors_list.h:321 ../../Firmware/mmu2/errors_list.h:322
+#: ../../Firmware/mmu2/errors_list.h:323 ../../Firmware/mmu2/errors_list.h:324
+#: ../../Firmware/mmu2/errors_list.h:325
 msgid "More details online."
 msgstr "Mera detaljer online."
 
@@ -1401,7 +1401,7 @@ msgid "Once"
 msgstr "En gång"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9451 ../../Firmware/messages.cpp:175
+#: ../../Firmware/Marlin_main.cpp:9453 ../../Firmware/messages.cpp:175
 msgid "PAUSED THERMAL ERROR"
 msgstr "PAUSAT TERMISKT FEL"
 
@@ -1448,7 +1448,7 @@ msgstr ""
 "menyn Inställningar->PINDA kal."
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:139 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:193
 msgid "PULLEY CANNOT MOVE"
 msgstr "REMSKIVA FASTNAT"
 
@@ -1547,7 +1547,7 @@ msgid "Please place steel sheet on heatbed."
 msgstr "Placera metallskiva på värmebädden."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11208 ../../Firmware/Marlin_main.cpp:11238
+#: ../../Firmware/Marlin_main.cpp:11210 ../../Firmware/Marlin_main.cpp:11240
 #: ../../Firmware/messages.cpp:79
 msgid "Please press the knob to unload filament"
 msgstr "Vänligen tryck på knappen för att mata ut filament"
@@ -1644,7 +1644,7 @@ msgid "Press the knob"
 msgstr "Tryck på knappen"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11220
+#: ../../Firmware/Marlin_main.cpp:11222
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Tryck på knappen för att förvärma munstycket och fortsätta."
 
@@ -1702,8 +1702,8 @@ msgstr ""
 "Skrivarmunstyckets diameter skiljer sig från G-codeen. Kontrollera värdet i "
 "inställningarna. Utskriften avbröts."
 
-#. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:280
+#. MSG_DESC_PULLEY_CANNOT_MOVE c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:296
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 "Remskivans motor stannade. Se till att remskivan kan röra sig och "
@@ -1716,7 +1716,7 @@ msgid "Pushing filament"
 msgstr "Pressar filament"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:171 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:181 ../../Firmware/mmu2/errors_list.h:227
 msgid "QUEUE FULL"
 msgstr "KÖ FULL"
 
@@ -1731,7 +1731,7 @@ msgid "Rear side [µm]"
 msgstr "Baksida [µm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10598
+#: ../../Firmware/Marlin_main.cpp:10600
 msgid "Recovering print"
 msgstr "Återställer utskrift"
 
@@ -1746,7 +1746,7 @@ msgid "Rename"
 msgstr "Döp om"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:313
+#: ../../Firmware/mmu2/errors_list.h:276 ../../Firmware/mmu2/errors_list.h:329
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1783,7 +1783,7 @@ msgid "Retract from FINDA"
 msgstr "Dra in från FINDA"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:329 ../../Firmware/mmu2/errors_list.h:339
+#: ../../Firmware/mmu2/errors_list.h:346 ../../Firmware/mmu2/errors_list.h:356
 msgid "Retry"
 msgstr "Igen"
 
@@ -1819,17 +1819,17 @@ msgid "SD card"
 msgstr "SD-kort"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:145 ../../Firmware/mmu2/errors_list.h:197
 msgid "SELECTOR CANNOT HOME"
 msgstr "VÄLJARE FASTNAT"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:144 ../../Firmware/mmu2/errors_list.h:198
 msgid "SELECTOR CANNOT MOVE"
 msgstr "VÄLJARE FASTNAT"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9477 ../../Firmware/messages.cpp:114
+#: ../../Firmware/Marlin_main.cpp:9479 ../../Firmware/messages.cpp:114
 msgid "STOPPED."
 msgstr "STOPPAD."
 
@@ -2042,7 +2042,7 @@ msgid "Steel sheets"
 msgstr "Metallskivor"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:333 ../../Firmware/mmu2/errors_list.h:343
+#: ../../Firmware/mmu2/errors_list.h:350 ../../Firmware/mmu2/errors_list.h:360
 msgid "Stop"
 msgstr "Stopp"
 
@@ -2069,37 +2069,37 @@ msgid "Swapped"
 msgstr "Utbytt"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2233
+#: ../../Firmware/messages.cpp:177 ../../Firmware/temperature.cpp:2236
 msgid "THERMAL ANOMALY"
 msgstr "TERMISK ANOMALI"
 
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:196
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:198
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:209
 msgid "TMC DRIVER ERROR"
 msgstr "TMC DRIVER FEL"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:199
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:210
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:212
 msgid "TMC DRIVER RESET"
 msgstr "TMC DRIVER RESET"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:162 ../../Firmware/mmu2/errors_list.h:205
-#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:207
+#: ../../Firmware/mmu2/errors_list.h:168 ../../Firmware/mmu2/errors_list.h:216
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:218
 msgid "TMC DRIVER SHORTED"
 msgstr "TMC DRIVER KORTSLUTN"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:193
-#: ../../Firmware/mmu2/errors_list.h:194 ../../Firmware/mmu2/errors_list.h:195
+#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:206
 msgid "TMC OVERHEAT ERROR"
 msgstr "TMC ÖVERHETTNINGSFEL"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:202
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:204
+#: ../../Firmware/mmu2/errors_list.h:164 ../../Firmware/mmu2/errors_list.h:213
+#: ../../Firmware/mmu2/errors_list.h:214 ../../Firmware/mmu2/errors_list.h:215
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "TMC UNDERSPÄNNINGFEL"
 
@@ -2133,7 +2133,7 @@ msgid "Testing filament"
 msgstr "Testar filament"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:286
+#: ../../Firmware/mmu2/errors_list.h:248 ../../Firmware/mmu2/errors_list.h:302
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2141,7 +2141,7 @@ msgstr ""
 "blockerar dess rörelse."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:284
+#: ../../Firmware/mmu2/errors_list.h:245 ../../Firmware/mmu2/errors_list.h:300
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2205,12 +2205,12 @@ msgid "Tune"
 msgstr "Ställ in"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:219
+#: ../../Firmware/mmu2/errors_list.h:184 ../../Firmware/mmu2/errors_list.h:230
 msgid "UNLOAD MANUALLY"
 msgstr "LADDA UR MANUELLT"
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:332 ../../Firmware/mmu2/errors_list.h:342
+#: ../../Firmware/mmu2/errors_list.h:349 ../../Firmware/mmu2/errors_list.h:359
 msgid "Unload"
 msgstr "Ladda ur"
 
@@ -2250,8 +2250,8 @@ msgid "Voltages"
 msgstr "Spänning"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:190
-#: ../../Firmware/mmu2/errors_list.h:191 ../../Firmware/mmu2/errors_list.h:192
+#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:201
+#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:203
 msgid "WARNING TMC TOO HOT"
 msgstr "VARNING TMC FÖR VARM"
 
@@ -2453,12 +2453,12 @@ msgid "MMU power fails"
 msgstr "MMU strömavbr."
 
 #. MSG_TITLE_FILAMENT_EJECTED c=20
-#: ../../Firmware/mmu2/errors_list.h:175 ../../Firmware/mmu2/errors_list.h:220
+#: ../../Firmware/mmu2/errors_list.h:185 ../../Firmware/mmu2/errors_list.h:231
 msgid "FILAMENT EJECTED"
 msgstr "FILAMENT UTASTAT"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:264 ../../Firmware/mmu2/errors_list.h:317
+#: ../../Firmware/mmu2/errors_list.h:279 ../../Firmware/mmu2/errors_list.h:333
 msgid ""
 "Filament detected unexpectedly. Ensure no filament is loaded. Check the "
 "sensors and wiring."
@@ -2467,12 +2467,12 @@ msgstr ""
 "Kontrollera sensorerna och kablarna."
 
 #. MSG_TITLE_LOAD_TO_EXTRUDER_FAILED c=20
-#: ../../Firmware/mmu2/errors_list.h:142 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:196
 msgid "LOAD TO EXTR. FAILED"
 msgstr "MISLUKT LADDA EXTR."
 
 #. MSG_DESC_LOAD_TO_EXTRUDER_FAILED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:283
+#: ../../Firmware/mmu2/errors_list.h:244 ../../Firmware/mmu2/errors_list.h:299
 msgid ""
 "Loading to extruder failed. Inspect the filament tip shape. Refine the "
 "sensor calibration, if needed."
@@ -2480,10 +2480,10 @@ msgstr ""
 "Det gick inte att ladda till extrudern. Inspektera filamentspetsens form. "
 "Förfina sensorkalibreringen vid behov."
 
-#. MSG_TITLE_MCU_UNDERVOLTAGE_VCC c=20
-#: ../../Firmware/mmu2/errors_list.h:166 ../../Firmware/mmu2/errors_list.h:211
-msgid "MCU UNDERVOLTAGE VCC"
-msgstr "MCU UNDERSPÄNN. VCC"
+#. MSG_TITLE_MCU_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:222
+msgid "MMU MCU ERROR"
+msgstr "MMU MCU FEL"
 
 #. MSG_MATERIAL_CHANGES c=18
 #: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:1095
@@ -2492,32 +2492,31 @@ msgid "Material changes"
 msgstr "Materialutbyten"
 
 #. MSG_DESC_FILAMENT_EJECTED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:318
+#: ../../Firmware/mmu2/errors_list.h:280 ../../Firmware/mmu2/errors_list.h:334
 msgid "Remove the ejected filament from the front of the MMU."
 msgstr "Ta bort den utskjutna filament från framsidan av MMU."
 
-#. MSG_BTN_RESTART_MMU c=8
-#: ../../Firmware/mmu2/errors_list.h:331 ../../Firmware/mmu2/errors_list.h:341
-msgid "RstMMU"
-msgstr "RstMMU"
+#. MSG_BTN_RESET_MMU c=8
+#: ../../Firmware/mmu2/errors_list.h:348 ../../Firmware/mmu2/errors_list.h:358
+msgid "ResetMMU"
+msgstr "ResetMMU"
 
 #. MSG_DESC_INSPECT_FINDA c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:282
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:298
 msgid ""
 "Selector can't move due to FINDA detecting a filament. Make sure no filament"
-" is in selector and FINDA works properly."
+" is in Selector and FINDA works properly."
 msgstr ""
 "Väljaren kan inte röra sig på grund av att FINDA detekterar en filament. Se "
 "till att inget glödtråd är i väljaren och att FINDA fungerar korrekt."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:268 ../../Firmware/mmu2/errors_list.h:315
+#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:331
 msgid ""
-"The MMU firmware version incompatible with the printer's FW. Update to "
-"version 2.1.9."
+"MMU FW version is incompatible with printer FW.Update to version 3.0.0."
 msgstr ""
 "MMU firmwareversion är inkompatibel med skrivarens FW. Uppdatering till "
-"version 2.1.9."
+"version 3.0.0."
 
 #. MSG_PRELOAD_TO_MMU c=17
 #: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5231
@@ -2532,6 +2531,16 @@ msgstr "MK3-firmware upptäckt på MK3S-skrivare"
 msgid "MK3S firmware detected on MK3 printer"
 msgstr "MK3S-firmware upptäckt på MK3-skrivare"
 
+#. MSG_TITLE_UNKNOWN_ERROR c=20
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:232
+msgid "UNKNOWN ERROR"
+msgstr "OKÄNT FEL"
+
+#. MSG_DESC_UNKNOWN_ERROR c=20 r=8
+#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:335
+msgid "Unexpected error occurred."
+msgstr "Ett oväntat fel inträffade."
+
 #~ msgid "XFLASH init"
 #~ msgstr "XFLASH init"