josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Prusa-Firmware/Firmware
History
Guðni Már Gilbert 9cf1f7871e Minor fix to M701 when MMU slot is out of range 
If MMU slot is outside of range, then we rather the printer
not do anything. Currently it would accidentally assume
the MMU is disabled. This may have undesireable results.

No change in memory
 		2023-05-02 22:32:18 +00:00
..
mmu2 Merge pull request #4122 from leptun/mmu2_fix_ptfe_check_distance 2023-04-04 15:04:58 +02:00
temp_model TM: Move headers to support the legacy build system 2023-02-17 15:01:59 +01:00
variants Remove INVERT_E1_DIR and INVERT_E2_DIR from config 2023-04-22 15:15:21 +00:00
BlinkM.cpp
…
BlinkM.h
…
Configuration.cpp Avoid using global variables 2022-12-05 16:43:51 +01:00
Configuration.h Remove random //-// comments 2023-04-22 13:39:08 +00:00
ConfigurationStore.cpp Save a bit of RAM from CS 2022-11-18 14:50:07 +01:00
ConfigurationStore.h Replace calibration state with a new calibration bitmap 2022-12-30 14:14:01 +01:00
Configuration_adv.h Remove TEMP_SENSOR_1 and TEMP_SENSOR_2 2023-04-22 15:15:21 +00:00
Configuration_var.h build: Add Configuration_var.h as a configuration wrapper 2022-10-05 01:26:26 +02:00
Dcodes.cpp Handle CALIBRATION_STATUS_{Z,XYZ} 2022-12-30 14:14:01 +01:00
Dcodes.h Improve PAT9125 UI implementation 2022-09-16 10:20:32 +02:00
Filament_sensor.cpp optimisation: use expired_cont is specific places 2023-04-15 13:45:09 +00:00
Filament_sensor.h Optimisation: Move filAutoLoad to ultralcd 2023-04-05 11:16:14 +02:00
Firmware.ino
…
Marlin.h Cleanup remove unused macros 2023-04-22 15:15:21 +00:00
MarlinSerial.cpp optimisation: change index from uint32_t to uint8_t 2023-01-25 18:21:22 +00:00
MarlinSerial.h Use timer3 instead of timer5 on miniRambo 2022-08-24 10:18:45 +03:00
Marlin_main.cpp Minor fix to M701 when MMU slot is out of range 2023-05-02 22:32:18 +00:00
Prusa_farm.cpp optimisation: cleanup print statistics 2023-04-05 11:16:54 +02:00
Prusa_farm.h Added //#define FARM_CONNECT_MESSAGE 2022-09-16 19:33:22 +02:00
Sd2Card.cpp Enable MISO pullup during SD CMD0 2022-10-10 09:43:50 +02:00
Sd2Card.h Change return types of two functions uint8_t 2022-01-30 11:39:24 +00:00
SdBaseFile.cpp Reduce a few magic numbers for FILENAME_LENGTH 2022-08-26 19:26:26 +03:00
SdBaseFile.h Remove temporary changes from SdBaseFile.h 2021-01-28 09:42:50 +01:00
SdFatConfig.h
…
SdFatStructs.h
…
SdFatUtil.cpp Introduce STACK_GUARD_MARGIN in all variants 2021-06-12 12:08:53 +02:00
SdFatUtil.h Introduce STACK_GUARD_MARGIN in all variants 2021-06-12 12:08:53 +02:00
SdFile.cpp SDFile - fix errorneous offset computation 2021-03-30 11:33:42 +02:00
SdFile.h Remove commented debug code 2021-02-10 11:18:59 +01:00
SdInfo.h
…
SdVolume.cpp
…
SdVolume.h Extract gcode filter from SdBaseFile into SdFile + optimization 2021-01-27 09:33:28 +01:00
Servo.cpp change boolean to bool 2021-07-20 08:03:17 +02:00
Servo.h
…
SpoolJoin.cpp optimisation: spooljoin: use new eeprom init method 2023-02-11 15:58:07 +01:00
SpoolJoin.h optimisation: spooljoin: use new eeprom init method 2023-02-11 15:58:07 +01:00
Tcodes.cpp optimisation: simplify T-code response for single material 2023-04-15 13:45:08 +00:00
Tcodes.h MMU2 interface overhaul 2022-09-16 10:21:53 +02:00
Timer.cpp Implement Timer::expired_cont() 2022-07-25 17:30:22 +02:00
Timer.h Implement Timer::expired_cont() 2022-07-25 17:30:22 +02:00
TimerRemaining.h
…
adc.cpp Decouple temperature ISR from ADC readings 2022-07-25 17:30:21 +02:00
adc.h Fixup after rebase onto MK3 2022-09-16 10:23:47 +02:00
asm.h Simplify GETPC() 2022-02-02 21:06:58 +01:00
backlight.cpp Remove menu code in favor of simplicity 2023-04-06 06:05:59 +02:00
backlight.h Remove menu code in favor of simplicity 2023-04-06 06:05:59 +02:00
boards.h
…
bootapp.c Remove unused/broken bootapp code 2021-03-03 16:31:30 +02:00
bootapp.h Fix usage of RAMEND 2021-06-12 13:16:12 +02:00
cardreader.cpp postponed kill() message with softReset 2023-04-13 10:57:00 +02:00
cardreader.h Reduce a few magic numbers for FILENAME_LENGTH 2022-08-26 19:26:26 +03:00
cmdqueue.cpp Merge pull request #4067 from scottmudge/MK3_3.12-meatpack-pr 2023-04-19 09:20:07 +02:00
cmdqueue.h MeatPack gcode compression support 2023-04-13 10:50:15 +02:00
config.h Enable Analog IR sensor again 2023-04-16 13:58:18 +00:00
doxyfile
…
eeprom.cpp optimisation: re-use adjust_bed_reset() 2023-02-08 08:01:55 +01:00
eeprom.h Fix eeprom table addresses 2023-04-13 11:34:18 +02:00
fancheck.cpp Move fan_state to fancheck.cpp and make it static 2023-04-15 13:45:10 +00:00
fancheck.h TM: Fan measuring state reset unification 2023-01-16 08:43:36 +01:00
fastio.h Change arduino IO to fastio where possible 2022-01-30 11:22:43 +00:00
first_lay_cal.cpp Restore old M701/M702 behavior 2023-04-29 16:22:28 +00:00
first_lay_cal.h Implement variant of enquecommand which accepts format string 2023-04-05 09:10:39 +02:00
heatbed_pwm.cpp Remove unnecessary assignment 2021-06-21 06:47:59 +02:00
la10compat.cpp Re-adjust LA10->15 conversion 2020-09-07 21:44:34 +02:00
la10compat.h Adjust E-jerk in LA10 compatibility mode 2020-02-03 15:42:27 +01:00
language.c Update config.h translation documentation and move language to group2 2022-09-14 11:33:24 +02:00
language.h Update config.h translation documentation and move language to group2 2022-09-14 11:33:24 +02:00
lcd.cpp Merge pull request #4167 from leptun/lcd_encoder_improvements 2023-04-24 15:58:54 +02:00
lcd.h lcd encoder: use lookup table 2023-04-24 11:56:13 +02:00
le.sh
…
macros.h Use timer3 instead of timer5 on miniRambo 2022-08-24 10:18:45 +03:00
meatpack.cpp MeatPack gcode compression support 2023-04-13 10:50:15 +02:00
meatpack.h MeatPack gcode compression support 2023-04-13 10:50:15 +02:00
menu.cpp many more lcd_putc_at optimisations 2023-04-15 13:45:10 +00:00
menu.h Fix `M0` click not consumed 2023-04-21 12:59:40 +02:00
mesh_bed_calibration.cpp optimisation: there is only one extruder when planning a line 2023-01-06 19:33:32 +01:00
mesh_bed_calibration.h Optimise if-statments in world2machine_clamp 2022-02-01 18:37:41 +00:00
mesh_bed_leveling.cpp Use memset instead of nested for-loop to zero a 2d array 2021-08-02 19:20:51 +00:00
mesh_bed_leveling.h Remove undefined function 2022-01-30 11:39:29 +00:00
messages.cpp Restore old M701/M702 behavior 2023-04-29 16:22:28 +00:00
messages.h Restore old M701/M702 behavior 2023-04-29 16:22:28 +00:00
mmu2.cpp Fix issue where Tx gcode doesnt reset custom_message_type 2023-04-23 09:52:11 +00:00
mmu2.h Remove unused LoadingToNozzleRAII 2023-04-16 17:23:28 +00:00
mmu2_config.h Split the mmu2 config into MMU2 and MMU2S 2022-12-18 09:58:20 +01:00
mmu2_crc.cpp Upgrade protocol to v2.1 - read/write registers + CRC 2022-09-16 10:22:38 +02:00
mmu2_crc.h Upgrade protocol to v2.1 - read/write registers + CRC 2022-09-16 10:22:38 +02:00
mmu2_error_converter.cpp Don't translate the more button 2023-03-19 16:50:42 +00:00
mmu2_error_converter.h clang-format 2023-01-31 09:35:22 +01:00
mmu2_fsensor.cpp Reuse FSensor runout blocking impl. throughout the whole FW 2022-09-16 10:22:38 +02:00
mmu2_fsensor.h clang-format 2023-01-31 09:35:22 +01:00
mmu2_log.cpp Remove `MMU2` and `MMU unit` messages 2023-03-14 08:30:15 +01:00
mmu2_log.h Remove `MMU2` and `MMU unit` messages 2023-03-14 08:30:15 +01:00
mmu2_marlin.h Improve MMU toolchange when E-cool mode is enabled 2023-03-26 08:57:59 +00:00
mmu2_marlin1.cpp Add comment about planner_aborted = false 2023-03-26 09:00:34 +00:00
mmu2_marlin_macros.h Refactor mmu2.cpp and related interfaces 2023-01-31 09:35:22 +01:00
mmu2_power.cpp Refactor mmu2.cpp and related interfaces 2023-01-31 09:35:22 +01:00
mmu2_power.h MMU2 interface overhaul 2022-09-16 10:21:53 +02:00
mmu2_progress_converter.cpp cleanup: Do not return const values from functions 2022-09-30 12:55:47 +02:00
mmu2_progress_converter.h cleanup: Do not return const values from functions 2022-09-30 12:55:47 +02:00
mmu2_protocol.cpp cleanup: Remove implicit fallthrough in CRC validation 2022-09-30 12:55:47 +02:00
mmu2_protocol.h Implement read/write registers for M707/M708 2022-09-16 10:23:47 +02:00
mmu2_protocol_logic.cpp optimisation: mmu: combine if statements 2023-04-15 13:45:08 +00:00
mmu2_protocol_logic.h Disable reading MMU register 0x21 2023-03-14 15:12:50 +01:00
mmu2_reporting.cpp Fix an issue where visualisation is overwritten by SD file name 2023-04-14 09:32:41 +02:00
mmu2_reporting.h PFW-1504 Set cursor position each time to be safe 2023-03-13 06:47:08 +01:00
mmu2_serial.cpp cleanup: Remove return value from MMU2Serial::write() 2022-09-30 12:55:47 +02:00
mmu2_serial.h cleanup: Remove return value from MMU2Serial::write() 2022-09-30 12:55:47 +02:00
mmu2_state.h Remove `MMU2` and `MMU unit` messages 2023-03-14 08:30:15 +01:00
mmu2_supported_version.h Add MMU error code: MCU_UNDERVOLTAGE_VCC (#4069) 2023-03-08 15:42:25 +01:00
motion_control.cpp optimisation: there is only one extruder when planning a line 2023-01-06 19:33:32 +01:00
motion_control.h optimisation: there is only one extruder when planning a line 2023-01-06 19:33:32 +01:00
optiboot_xflash.cpp Fix MK2.5 softReset() 2022-12-16 12:10:47 +01:00
optiboot_xflash.h Rename w25x20cl to xflash 2021-04-06 10:16:47 +02:00
pat9125.cpp Remove SWSPI which is not used/implemented 2022-12-20 10:10:45 +01:00
pat9125.h Cleanup pat9125.h 2022-09-16 10:17:04 +02:00
pins.h Move SDA/SCL pins into pins.h for fastio compatibility 2021-01-29 17:48:59 +01:00
pins_Einsy_1_0.h Fix MK2.5 softReset() 2022-12-16 12:10:47 +01:00
pins_Rambo_1_0.h More documentation for pins file 2022-12-16 12:29:59 +01:00
pins_Rambo_1_3.h More documentation for pins file 2022-12-16 12:29:59 +01:00
planner.cpp Cleanup remove unused macros 2023-04-22 15:15:21 +00:00
planner.h Change block buffer fan speed to one byte 2023-04-06 06:05:59 +02:00
printers.h
…
qr_solve.cpp
…
qr_solve.h
…
rbuf.c
…
rbuf.h
…
sm4.c build: Add Configuration_var.h as a configuration wrapper 2022-10-05 01:26:26 +02:00
sm4.h Fix sm4.h line ending 2021-01-22 18:57:24 +02:00
sound.cpp backlight: always allow backlight to dim/wake 2023-02-18 17:08:35 +00:00
sound.h optimisation: sound: use new eeprom_init function 2023-02-11 15:56:46 +01:00
speed_lookuptable.cpp
…
speed_lookuptable.h Fix MUL24x24R24 comment 2022-02-09 00:26:46 +01:00
spi.c
…
spi.h
…
static_assert.h
…
stepper.cpp Missed these macros disable_e1/2 2023-04-22 15:15:21 +00:00
stepper.h Disable M351 when using TMC2130 and code related to it 2023-04-07 21:07:26 +02:00
stk500.h
…
strlen_cx.h clang-format 2023-01-31 09:35:22 +01:00
strtod.c MeatPack gcode compression support 2023-04-13 10:50:15 +02:00
swi2c.c build: Add Configuration_var.h as a configuration wrapper 2022-10-05 01:26:26 +02:00
swi2c.h Add disable() to swi2c as well 2022-09-16 10:06:26 +02:00
system_timer.h Move millis_nc to system_timer.h 2022-07-18 17:53:27 +02:00
temp_model.h TM: Split default model parameters into a separate header 2023-02-17 15:01:59 +01:00
temperature.cpp Remove checkAllHotends() 2023-04-22 15:15:21 +00:00
temperature.h Remove checkAllHotends() 2023-04-22 15:15:21 +00:00
thermistortables.h Remove TEMP_SENSOR_1 and TEMP_SENSOR_2 2023-04-22 15:15:21 +00:00
timer02.c split timer0 and timer2 initialization. Move timer2 init early 2021-01-31 17:18:32 +02:00
timer02.h split timer0 and timer2 initialization. Move timer2 init early 2021-01-31 17:18:32 +02:00
tmc2130.cpp cleanup: tmc2130: make variables static where applicable 2023-04-15 13:45:10 +00:00
tmc2130.h cleanup: tmc2130: make variables static where applicable 2023-04-15 13:45:10 +00:00
tone04.c build: Add Configuration_var.h as a configuration wrapper 2022-10-05 01:26:26 +02:00
tone04.h ALTFAN implementation (#2692) 2020-06-01 17:58:15 +02:00
twi.cpp twi safe init 2022-09-16 10:06:26 +02:00
twi.h Shorter TWI timeout 2022-09-16 10:06:26 +02:00
uart2.c Increase RX buffer size 2022-09-16 10:21:53 +02:00
uart2.h Implement mmu2 serial interface 2022-09-16 10:21:53 +02:00
ultralcd.cpp Restore old M701/M702 behavior 2023-04-29 16:22:28 +00:00
ultralcd.h Fix `M0` click not consumed 2023-04-21 12:59:40 +02:00
util.cpp Resolve PR review 2023-04-15 13:45:10 +00:00
util.h Remove random //-// comments 2023-04-22 13:39:08 +00:00
vector_3.cpp
…
vector_3.h
…
xflash.c xflash: add xflash_multipage_program and documentation 2021-06-08 15:25:16 +02:00
xflash.h xflash: add xflash_multipage_program and documentation 2021-06-08 15:25:16 +02:00
xflash_dump.cpp Simplify GETPC() 2022-02-02 21:06:58 +01:00
xflash_dump.h Crash if pullups get enabled on the thermistor inputs 2022-02-01 12:34:07 +01:00
xflash_layout.h Make layout static regardless of what is enabled 2022-02-17 09:34:09 +01:00
xyzcal.cpp Make the function static 2023-04-09 13:40:10 +00:00
xyzcal.h Typo: meassure -> measure 2022-12-22 12:54:42 +01:00