This test code in SysTickHandler() should give you a rather
accurate clock with only a few seconds deviation per hour:
#include "serial.h"
#include "sersendf.h"
void SysTick_Handler(void) {
static uint32_t count = 0;
static uint8_t minutes = 0, seconds = 0;
count++;
if ( ! (count % 500)) { // A full second.
seconds++;
if ( ! (seconds % 60)) {
seconds = 0;
minutes++;
}
sersendf_P(PSTR("%su:"), minutes);
if (seconds < 10)
serial_writechar('0');
sersendf_P(PSTR("%su\n"), seconds);
}
[...]
On ARM we use only the 16 byte hardware buffer for sending and
receiving over the serial line, which is often too short for
debugging messages. This implementation works fine and still
neither blocks nor introduces delays for short messages.
Removed while-loop. Looks like we need some more us than the LPC?!? With +7us
we do not lose characters anymore.
We have only one UART, we use only one UART, so it's pointless to
do pin mapping calculations at runtime.
SIZES ARM... stm32f411
FLASH : 4832 bytes 1%
RAM : 404 bytes 1%
EEPROM : 0 bytes 0%
@phord abstract this to: This happens only when !recalc_speed,
meaning we are cruising, not accelerating or decelerating. So it
pegs our dda->c at c_min if it never made it as far as c_min.
This commit will fix https://github.com/Traumflug/Teacup_Firmware/issues/69
delta_um can become very small, where maximum_feedrate_P is constant.
When moving this division out of the loop, the result can be wrong.
dda->total_steps becomes also very small with delta_um. So this will fit perfectly.
This reverts commit cd66feb8d1.
So let's bring this part back.
We save 35 clock cycles at 'LED on time maximum'
ATmega sizes '168 '328(P) '644(P) '1280
Program: 18038 bytes 126% 59% 29% 14%
Data: 1936 bytes 190% 95% 48% 24%
EEPROM: 32 bytes 4% 2% 2% 1%
short-moves.gcode statistics:
LED on occurences: 888.
LED on time minimum: 217 clock cycles.
LED on time maximum: 520 clock cycles.
LED on time average: 249.626 clock cycles.
smooth-curves.gcode statistics:
LED on occurences: 22589.
LED on time minimum: 217 clock cycles.
LED on time maximum: 537 clock cycles.
LED on time average: 284.747 clock cycles.
triangle-odd.gcode statistics:
LED on occurences: 1636.
LED on time minimum: 217 clock cycles.
LED on time maximum: 520 clock cycles.
LED on time average: 270.933 clock cycles.
ATmega sizes '168 '328(P) '644(P) '1280
Program: 18266 bytes 128% 60% 29% 15%
Data: 1936 bytes 190% 95% 48% 24%
EEPROM: 32 bytes 4% 2% 2% 1%
short-moves.gcode statistics:
LED on occurences: 888.
LED on time minimum: 243 clock cycles.
LED on time maximum: 555 clock cycles.
LED on time average: 250.375 clock cycles.
smooth-curves.gcode statistics:
LED on occurences: 22589.
LED on time minimum: 243 clock cycles.
LED on time maximum: 572 clock cycles.
LED on time average: 292.139 clock cycles.
triangle-odd.gcode statistics:
LED on occurences: 1636.
LED on time minimum: 243 clock cycles.
LED on time maximum: 555 clock cycles.
LED on time average: 275.699 clock cycles.
start the simulation with ./parse_clean xyz, where 'xyz' can be anything to name the created files.
in the end you will get 3 pictures.
swan-reference-xyz.png how it should looks like.
swan-current-xyz.png how it will looks now.
swan-diff-xyz.png is the difference.
This 3 pictures show only the X-axis.
you will get also a forth file. pp-xyz.asc. you can open this file for example with meshlab and you can see that current model in 3d.
If you want to use your own gcode, please do the following:
Create a normal gcode. Delete any M116 (temp waitings). Maybe you want also deleting comments.
Then add M114 for every x line.
I do this with the swan-test.gcode:
sed '1~2 s/$/\nM114/g' < swan.gcode > swan-test.gcode
In `ACCELERATION_RAMPING` code we use the dda->id field even when we do
not enable `LOOKAHEAD`. Expose the variable and its related `idcnt`
when `ACCELERATION_RAMPING` is used.
Add a regression-test to catch this in the future.
Simple trick: raise the feedrate, no need to care about a milling
bit when running a simulation. This reduces simulated time and as
such, duration of the simulation (by about 50%).
Also remove G-code which was never executed because simulations
are chopped at 1 minute of simulation time and smooth-curves.gcode
took about 1.5 minutes.
Step pulse measurements remain about the same:
ATmega sizes '168 '328(P) '644(P) '1280
Program: 17944 bytes 126% 59% 29% 14%
Data: 1920 bytes 188% 94% 47% 24%
EEPROM: 32 bytes 4% 2% 2% 1%
short-moves.gcode statistics:
LED on occurences: 888.
LED on time minimum: 202 clock cycles.
LED on time maximum: 380 clock cycles.
LED on time average: 232.092 clock cycles.
smooth-curves.gcode statistics:
LED on occurences: 22589.
LED on time minimum: 194 clock cycles.
LED on time maximum: 423 clock cycles.
LED on time average: 254.425 clock cycles.
triangle-odd.gcode statistics:
LED on occurences: 1636.
LED on time minimum: 220 clock cycles.
LED on time maximum: 380 clock cycles.
LED on time average: 245.575 clock cycles.
These values were queued up just for finding out individual axis
speeds in dda_find_crossing_speed(). Let's do this calculation
with other available movement properties and save 16 bytes of RAM
per movement queue entry.
First version of this commit forgot to take care of the feedrate
sign (prevF, currF). Lack of that found by @Wurstnase. Idea of
tweaking calculation of 'dv' to achieve this also by @Wurstnase.
It was tried to set the sign immediately after calculation of the
absolute values, but that resulted in larger ( = slower) code.
Binary size down 132 bytes, among that two loops. RAM usage down
256 bytes for the standard test case:
ATmega sizes '168 '328(P) '644(P) '1280
Program: 17944 bytes 126% 59% 29% 14%
Data: 1920 bytes 188% 94% 47% 24%
EEPROM: 32 bytes 4% 2% 2% 1%
We calculate a safe join speed in dda_join_moves using data from
two source DDA movements. We ensure the DDA values we use are sane
by atomically copying them to local variables before beginning our
calculation. But later we discard all our results if the DDA went
live in the meantime, as evidenced by changes in `DDA->live` or
`DDA->id`.
Since we will not use the results of our calculations if either of
these change, we can safely reference all the other DDA values
non-atomically. Change the ATOMIC section to protect only the
`DDA->id` values at the start.
Added by Traumflug: this costs a negligible 4 bytes binary size:
ATmega sizes '168 '328(P) '644(P) '1280
Program: 18082 bytes 127% 59% 29% 15%
Data: 2176 bytes 213% 107% 54% 27%
EEPROM: 32 bytes 4% 2% 2% 1%
Nico Tonnhofer
Phil Hord
Markus Hitter