9b018b7433
Make USB_SERIAL fit for the Arduino IDE.
...
This also includes renaming of USE_USB to USB_SERIAL for more
consistency.
2012-12-03 19:49:58 +01:00
244d8b6654
Makefile: add autodependencies for header files.
2012-12-03 19:49:11 +01:00
33b550e227
Makefile: add better optimisation flags.
...
Fetched from V-USB's Readme.txt. Saves almost 200 bytes and thus
likely makes the binary faster.
2012-12-03 19:48:24 +01:00
0b11812ce5
Make use of the new usb_serial (and drop usage of lufa_serial).
...
At this point in time not a single user of LUFA is known and
here is reported how usb_serial apparently works more reliable:
http://forums.reprap.org/read.php?147,33082,160724#msg-160724
So it's likely we can move from lufa_serial to usb_serial entirely.
2012-11-08 16:37:18 +01:00
52ce6b5f52
More enablement of ATmega32U chip.
...
- ATmega32U timer 4 register handling differs from other AVRs:
Change heater.c and mendel.c.
- LUFA USB recognition expanded in Makefile.
- Add section for __AVR_ATmega32U4__ in arduino.h.
2012-10-14 22:56:09 +02:00
28cf72bfe8
Makefile: change wording regarding a newer config.default.h again.
...
Hope it's clear now :-)
2012-08-04 22:07:51 +02:00
d49c0745d5
dda_maths.h: make um_to_steps_{xyze}() inline functions.
...
Size and speed is the same as with #defines, but now there is
type checking.
2012-08-04 22:06:59 +02:00
55132c0458
Makefile: don't provide means for programming fuses.
...
Programming fuses doesn't belong to the firmware or to firmware
uploading. Fuses have to match the hardware and the bootloader,
so they should be set when setting up these.
2012-07-16 20:15:18 +02:00
7f3c1e61ba
Makefile: clarify definition of the firmware upload device in use.
...
Programmers typically don't do baud rate, so setting the avrdude -b
flag has to be avoided in this case.
2012-07-16 20:15:03 +02:00
7efb895ee3
Introduce an integer multiply-divide algorithm.
...
We have multiplies followed by divides all over the place and
most of them are difficult to handle regarding overflows. This
new algorithm handles this fine in all cases, as long as all
three operators and the overall result fits into 32 bits.
2012-07-16 20:13:29 +02:00
1c998067bd
Makefile: add instruction on how to get rid of an error message.
2012-07-13 15:01:27 +02:00
b7cd9859c4
Rename config.h.dist to something with a .h suffix.
...
This eases working with colouring text editors and is more
consistent with all those board-specific configs.
2011-10-23 19:51:45 +02:00
5e85bb4fbb
Makefile: typo fix.
2011-08-16 15:19:11 +02:00
9e64fdd8b0
Makefile: make that sizes table fit into 80 chars again.
2011-08-16 15:14:50 +02:00
f6a70a5984
Makefile: get rid of that unrequested diff output.
...
This masks the message and annoys developers.
2011-08-16 15:14:47 +02:00
b05e358223
Added size output for ATMEGA1280.
2011-08-16 13:38:53 +02:00
7a57b69cc1
fix delay compilation. Takes some of madscifi's ideas yet still provides fallback functions for eg; homing which uses variable delays
2011-05-10 13:55:08 +10:00
b00c53f69e
The addition of delay.h to the dependencies of (PROGRAM).elf did not have the desired effect (to force a recompile of all if delay.h changed). Removed the dependency.
2011-05-04 22:33:41 -07:00
86a34ad5a2
Eliminates overflow in the delayMicrosecondsInterruptible
...
function.
Inline delay functions and change base function to
use __builtin_avr_delay_cycles(). Generated delays
are at least as long as the requested delay and
compensate for the system clock (based on F_CPU).
Delay functions must be called with constant values.
A compile time error is issued if they are not.
Delay.c removed as it is no longer used.
2011-05-04 20:14:46 -07:00
143398705c
add "functionsbysize" make target
2011-04-29 10:55:42 +10:00
d7f5c08174
all defines live in config.h now, remove from Makefile
2011-03-24 11:26:11 +11:00
0dc7d77885
Massive Doxygen documentation addition
...
'make doc' then point your browser at doc/html/
Needs plenty of cleanup and polishing, but the main bulk is here
even documents your configuration! ;)
2011-03-22 01:34:36 +11:00
0ec0d360be
atmega2560 support in makefile
2011-03-07 13:45:09 +11:00
dba296d3d2
Complete project renaming
2011-03-07 13:44:54 +11:00
08b516d7f3
Add support for USB serial using the LUFA library.
...
Configured for at90usb1287 and F_CPU=8000000L this is compatible with
the AT90USBKEY. Other boards, chips and frequencies require updating
the configuration in lufa_serial/makefile and possibly adding a Board
driver to the LUFA submodule.
2011-03-06 09:18:58 +11:00
780dea1186
avr-libc's math is smaller than gcc's, use it
2011-02-21 19:09:08 +11:00
8540be950a
use CRC16 to verify heater PID settings in eeprom
2011-02-20 17:13:09 +11:00
9dc4d54133
fix compile error around new homing logic
2011-02-20 16:35:22 +11:00
d88179a9ce
Makefile: Remove .eeprom .fuse .lock sections from hex file.
...
Signed-off-by: Michael Moon <triffid.hunter@gmail.com>
2011-02-04 11:00:45 +11:00
096d7dfdf3
Merge release-candidate-triffid branch
2011-01-07 23:09:13 +11:00
eca4b0b0ec
Makefile: add other configuration values in comments.
2010-10-25 11:44:49 +02:00
3e0b40a2cf
get .al files for simulation, fix file list for split gcode parser
2010-10-21 11:05:55 +11:00
3028b297f3
Add simulation code: use "make sim"
2010-10-21 11:05:55 +11:00
56c355c5bd
split gcode parse/process into separate files for readability
2010-10-20 17:51:49 +11:00
e3d0aa7b62
split delay functions into separate files
2010-10-11 10:12:35 +11:00
775f5400e3
Added atmega644 to size display
2010-10-08 20:48:47 +11:00
af53d2350e
Makefile: different solution for commit f5a26de775, as suggested
...
by triffid.
2010-10-05 12:19:34 +02:00
cfff4ca5d3
added "config.h" to dependancies for everything.
...
I noticed that changing config.h didn't recompile dda.c.
So I changed that.
2010-10-03 23:27:38 +02:00
f5a26de775
Makefile: fix the build failure introduced with the recent Makefile
...
change. Sorry for letting this slip through.
2010-10-02 16:37:05 +02:00
5cb2982e57
Makefile: disallow building if config.h obviously isn't up to date.
2010-10-02 16:14:20 +02:00
bd76a6ce1c
Expanded README, updated Makefile header
2010-09-26 11:12:34 +10:00
b80c5ea7b5
UNTESTED support for thermistor and AD595
2010-09-13 17:14:12 +10:00
fb82865dfc
Add eeprom to size display
2010-09-12 16:21:41 +10:00
273d63f242
splitting heater stuff out into a separate file
2010-09-12 14:47:49 +10:00
53a0978529
stty ixoff enables host-side support of XON/XOFF flow control, rather than ixon
2010-09-11 23:14:13 +10:00
632ddaa216
added some descriptions of available defines
2010-09-10 13:19:59 +10:00
446b2223cc
Makefile: add a variable for avrdude.conf, as the location
...
of this file depends on the environment.
2010-09-08 16:27:02 +02:00
54f9598ef1
Turn off the DEBUG flag by default for making the default
...
build fit onto a '168. There's a commented line for turning it on easily.
2010-09-08 16:20:58 +02:00
3ec34e5761
Fixed makefile to use avr-objdump to calculate size
2010-09-06 08:05:03 +10:00
0b51c1d0ab
Merge branch 'mendel-triffid'
...
Conflicts:
dda.c
gcode.c
machine.h
temp.c
2010-08-10 14:55:06 +10:00
Markus Hitter
David Forrest
Bas Laarhoven
Michael Moon
Jim McGee
Vaclav Ax Hula
Ben Jackson
Markus Amsler
Stephan Walter
John Gilmore