Allow to set the source epoch of the build with
PROJECT_VERSION_TIMESTAMP.
When unset fetch the commit timestamp of the current HEAD automatically
instead of leaving the source as 0. This fixes the firmware DATE
information in the support menu.
If for some reason a user added a extrusion move in the firmware. Prevent FINDA runout
from triggering.
Change in memory:
Flash: +16 bytes
SRAM: 0 bytes
temp_compensation_start() is only called when
PINDA_THERMISTOR is not defined.
Additionally make sure the retraction or unretraction cannot happen
twice in case MBL fails.
For MK3S users with MMU this extrusion move could
cause a FINDA runout event.
Change in memory:
Flash: -130 bytes
SRAM: 0 bytes
An example is when Unloading filament with MMU.
After the unload completes successfully, some menu items disappeared.
Because mFilamentBack() was not called
Change in memory:
Flash: -56 bytes
SRAM: 0 bytes
Kudos to @3d-gussner for finding the issue
Steps to reproduce:
1. reset printer
2. select Load filament
3. go back to main
4. LCD menu is very limited
5. To get all menus back select 6. Preheat
7. back to main
This commit is my proposed fix.
When eFilamentAction is equal to
FilamentAction::Load we must reset it to FilamentAction::None
when the Back button in Load Filament is selected
Change in memory:
Flash: -26 bytes
SRAM: 0 bytes
- Rename "Idler" to "Sensitivity"
- Implement ReadRegisterInner() as a way to read register in blocking contexts such as manage_response()
This allows us to show the current EEPROM value on the printer's LCD
Add a 'Tune' option to HOMING_IDLER_FAILED error
This will open a menu which allows
the user to change the stallguard threshold
from the MMU error screen
Change in memory:
Flash: +334 bytes
SRAM: +1 byte
I noticed this is how the order is in 3.13.0 and before.
I want to keep it exactly the same.
This somehow saves 2 bytes of flash. Probably compiler magic.
Change in memory:
Flash: -2 bytes
SRAM: 0 bytes
If vSense changes at runtime due to Run current
being changed. Then we must always shift the Hold current
correctly. Whether the vSense is changing 1 -> 0 or 0 ->1
Change in memory (with TMC2130_SERVICE_CODES_M910_M918):
Flash: +76 bytes
SRAM: 0 bytes
The firmware will ensure that the Hold current can never
exceed the Run current. In this scenario we must update
the global current array so that M913 reflects the register settings.
Added a echo to serial when this truncation happens
Change in memory:
Flash: +54 bytes
SRAM: 0 bytes
Yuri D'Elia
D.R.racer
3d-gussner
Guðni Már Gilbert
Alex Voinea
Michael Greene
vintagepc
Yuri D'Elia