3381bf2f7e
Merge pull request #2201 from vintagepc/2091_2153_sheet_Mcode
...
Add M850 code for setting sheet label and offsets
2023-02-17 15:12:22 +01:00
1b3fa8bfe9
TM: Move headers to support the legacy build system
2023-02-17 15:01:59 +01:00
a8f219259a
TM: Split default model parameters into a separate header
...
Preparation to support multiple default model parameter sets
2023-02-17 15:01:59 +01:00
d1ff728e4f
TM: future-proofing for incompatible model upgrades
...
Introduce a model version. This is initialized at "1" and doesn't
require any upgrade/downgrade checks since it's currently
retro-compatible.
2023-02-17 15:01:59 +01:00
9bd03cedb9
TM: Fix UV identity
2023-02-17 15:01:59 +01:00
ddf5147f9f
TM: Optimize temp_model_set_lag
...
Save about 20 bytes by rewriting the sample count check
2023-02-17 15:01:59 +01:00
b676d395e3
TM: Handle L/TEMP_MODEL_LAG
2023-02-17 15:01:59 +01:00
0bf6a5bc4b
TM: Handle UV (PTC loss)
...
Model UV as power-invariant, so that scaling P doesn't change the
intercept location (that is, the zero point remains at the same
temperature even for more powerful heaters).
NOTE: It's not clear to me whether this is generally true (couldn't
find a datasheet from the same heater in diffent power variants
showing the efficiency loss)
2023-02-17 15:01:59 +01:00
ba96c8d457
TM: Handle D/TEMP_MODEL_fS
2023-02-17 15:01:59 +01:00
eb88b720ac
TM: Handle UVDL set/load/report/upgrade
...
- Expose TEMP_MODEL_fS and TEMP_MODEL_LAG as D and L respectively,
initializing the default values based on the previous hard-coded
values.
- Always round L to the effective sample lag to future-proof model
upgrades or changes (the stored value _is_ the effective value).
- Introduce UV as a new linear term for PTC heaters, defaulting
to an identity for model backward-compatibility.
2023-02-17 15:01:59 +01:00
38b1e64687
TM: Allocate new eeprom parameters for PTC handling
2023-02-17 15:01:59 +01:00
235ce62cd3
Update Marlin_main.cpp
...
Remove more stale code
2023-02-17 08:58:17 -05:00
032d5ebe5b
Update Marlin_main.cpp
...
Fix use of removed function
2023-02-17 08:31:27 -05:00
d0e0b51497
Optimisation: lcd_commands "M702 C" should be "M702"
...
Change in memory:
Flash: -2 bytes
SRAM: 0 bytes
2023-02-17 14:30:20 +01:00
952b1af60b
Consistent use of noinline attribute
2023-02-17 14:30:20 +01:00
754b2d03c3
Remove extraneous line added during merge conflict resolution
2023-02-17 14:30:20 +01:00
25f9728e09
Add noinline attribute to count_e
2023-02-17 14:30:20 +01:00
620b19bbab
Roll up lay1cal_square loops
2023-02-17 14:30:20 +01:00
f92d2279d5
Re-use duplicated strings
2023-02-17 14:30:20 +01:00
8129a14f19
Move layer calibration finish commands into first_layer_cal.cpp
2023-02-17 14:30:20 +01:00
39160bc4ae
Free up some progmem
2023-02-17 14:30:20 +01:00
568eec5ee0
Implement first layer cal with calculated extrusion widths
2023-02-17 14:30:20 +01:00
20eef890a6
Merge branch 'MK3' into 2091_2153_sheet_Mcode
2023-02-17 08:24:49 -05:00
9b64d122dc
Disable MMU2S by default
...
On printers without the MMU no error screen should occur and no attempts of communication with the MMU should be performed -> EEPROM_MMU_ENABLED should default to 0.
PFW-1418
2023-02-17 12:53:07 +01:00
6745b2c766
Shorten Reset MMU button to fit LCD
...
Button strings are limited to 8 characters
2023-02-13 07:08:54 +01:00
b63f5433df
Don't show Pause/Stop menus while processing T-codes
...
PFW-1449
Change in memory:
Flash: +18 bytes
SRAM: +1 bytes
2023-02-12 15:58:07 +01:00
504099bd6c
optimisation: reduce code size in rendering cursor
...
Change in memory:
Flash: -62 bytes
SRAM: 0 bytes
2023-02-11 19:06:14 +01:00
c51aa10087
optimisation: spooljoin: use new eeprom init method
...
Change in memory:
Flash: -40 bytes
SRAM: -1 byte
2023-02-11 15:58:07 +01:00
982b1bb4bd
optimisation: backlight: use new eeprom_init function
...
Change in memory:
Flash: -56 bytes
SRAM: 0 bytes
2023-02-11 15:56:46 +01:00
c2a952cee5
optimisation: sound: use new eeprom_init function
...
Change in memory:
Flash: -18 bytes
SRAM: 0 bytes
2023-02-11 15:56:46 +01:00
8794ab2f71
respect Once sound mode
...
Change in memory:
Flash: +4 bytes
SRAM: 0 bytes
2023-02-11 15:54:33 +01:00
96fc90c80b
Revert a change in the MMU error screen logic
...
We can pull this code into a common function in a separate PR
2023-02-11 15:54:33 +01:00
5b4bc8bcdb
Tune louder beeps to match previous M600 behavior
2023-02-11 15:54:33 +01:00
b4f9f6d0b5
fixup: make sure to start the timer
...
Change in memory:
Flash: +10 bytes
SRAM: 0 bytes
2023-02-11 15:54:33 +01:00
8db2fbc97f
Improve sound handling for MMU error screen
...
Change in memory:
Flash: -174 bytes
SRAM: +4 bytes
2023-02-11 15:54:33 +01:00
e34faee389
optimisation: don't inline Sound_MakeCustom
...
Change in memory:
Flash: -32 bytes
SRAM: 0 bytes
2023-02-11 12:42:47 +01:00
7799853a05
optimisation: remove duplicate code
...
Sound_MakeCustom should play the sound
if critical = true OR the sound is not Silent
Change in memory:
Flash: -16 bytes
SRAM: 0 bytes
2023-02-11 12:42:47 +01:00
c826ae989f
Remove Done button on FINDA-related MMU error screens
...
Follows the requirements from Prusa-Error-Codes yaml definition.
Saves a fwe bytes as well as the button switch() statement got simplified.
PFW-1494
2023-02-10 14:38:18 +01:00
8b1b632164
Fix copy/paste typo thanks to @gudnimg
2023-02-10 14:35:36 +01:00
4f8dbb19fd
Fix `M862.x` LCD messages
...
As the new menue adds a Yes/No option the messages
need to be limited to c=20 r=3
Updated/shortened all translations
2023-02-10 14:35:36 +01:00
b02e8d9961
Fix First layer cal being stored without confirming with knob
2023-02-10 14:34:16 +01:00
c3cfc86094
Fix #3977
2023-02-10 14:27:04 +01:00
d403d58b19
TM: Do not emit an "error:" on the serial for recoverable errors
...
Use "echo:" for thermal model error reporting to avoid octoprint
automatically sending a M112 kill.
Keep using "error:" instead for other thermal errors (MAXTEMP/etc).
This should allow resuming a thermal mode pause with the default
octoprint settings.
2023-02-10 14:24:50 +01:00
ea7e717204
Cleanup: Remove various dead code
2023-02-10 08:17:36 +01:00
5552bdcb32
Merge pull request #3998 from 3d-gussner/MK3_Thermal_model
...
PFW-1479: Change Temp model to Thermal model
2023-02-08 18:31:34 +01:00
ca978080c4
Change to Thermal model
...
Add prusa.io/tm-cal link
and update all TM related translations
2023-02-08 15:36:59 +01:00
26126906ef
Hardcode expected MMU FW version into the error message v2
...
This is an 80% solution to PFW-1488 which should be somewhat compatible with the existing languages/translations infrastructure.
I don't see a point in extending the infrastructure a great deal to support some compile-time replacement in order to patch just MSG_DESC_FW_UPDATE_NEEDED.
Related PR: https://github.com/prusa3d/Prusa-Firmware/pull/3993
2023-02-08 10:50:33 +01:00
99761bdff7
optimisation: re-use adjust_bed_reset()
...
Move the code into eeprom.cpp since we're only working with EEPROM
Change in memory:
Flash: -42 bytes
SRAM: 0 bytes
2023-02-08 08:01:55 +01:00
3ddc2cf86d
Add ResetMMU and DisableMMU buttons to specific error screens
...
- MMU not responding/Communication error: add DisableMMU
- MMU FW update needed: add ResetMMU
Flash: +8B
RAM: +0B
2023-02-08 06:48:11 +01:00
296b0414af
Optimize execute_extruder_sequence
...
Save 64B by refactoring of execute_extruder_sequence.
2023-02-08 06:47:50 +01:00
3d-gussner
Yuri D'Elia
vintagepc
Guðni Már Gilbert
Giles Bathgate
D.R.racer
RoboMagus