josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7,949 Commits 31 Branches 140 Tags 71 MiB
Commit Graph

2067 Commits

Author SHA1 Message Date
gudnimg 40786a24e0 Rename "cardOK" to "mounted" 
Sync the Prusa firmware a little bit with Marlin 2.1
 2023-12-09 10:52:26 +00:00
gudnimg d94f263843 Rename initsd() to mount() 
Sync the Prusa firmware with Marlin 2.1 a little bit.
 2023-12-09 10:50:30 +00:00
3d-gussner 18daa5a62e
Merge pull request #2423 from Panayiotis-git/MK3_M600_Issue-2415 
LCD option to unload new filament on M600 (issue #2415)
 2023-12-04 17:03:38 +01:00
sarusani 60e311d74f Change reprint MENU_ITEM_SUBMENU_P to MENU_ITEM_FUNCTION_P 
There's no submenu -> don't show arrow
 2023-12-03 08:46:48 +01:00
sarusani 4d9e084cf7 Rename lcd_reprint_usb_print to lcd_send_action_start 
Sending action start can not only be used for reprints
 2023-12-03 08:44:54 +01:00
sarusani d267140ee6 Rename reprint_from_eeprom to lcd_reprint_from_eeprom 
It sets the lcd_return_to_status() at the end, so naming should be consistent witch the other functions
 2023-12-03 08:43:16 +01:00
Panayiotis-git 3da4407e4f Repeat the M600 unload/load filament sequence - Fix translations 2023-12-01 21:13:24 +02:00
Panayiotis-git 8ceda27cda Provide option to repeat the M600 unload/load filament sequence 2023-12-01 21:12:31 +02:00
3d-gussner 4dfc484265
Merge pull request #4207 from gudnimg/crashdet_cancel-fixup 
`crashdet_cancel()` doesnt cleanup all variables when USB printing
 2023-12-01 17:41:33 +01:00
3d-gussner 096a1c9fe0 Change Reprint action message to comply to OctoPrint actions 2023-11-30 15:08:48 +01:00
3d-gussner d9d42a0678 Use of PrinterState for Reprint menu 2023-11-23 06:47:04 +01:00
Guðni Már Gilbert e1e0b0afa1 Refactor code which resets crash detection setting 
Add function crashdet_use_eeprom_setting

Change in memory:
Flash: -52 bytes
SRAM: 0 bytes
 2023-11-22 21:19:43 +00:00
Guðni Már Gilbert 30d0da4698 Close SD file in print_stop instead of UnconditionalStop() 
Change in memory:
Flash: -6 bytes
SRAM: 0 bytes
 2023-11-22 21:19:17 +00:00
Juan Francisco Estrada 0b4af3b97f Fix: Reprint menu does not appear during the heating 2023-11-22 12:20:13 +01:00
Juan Francisco Estrada 73436e9351 Fixed Reprint from USB and from SD, some debug is needed 2023-11-22 12:20:00 +01:00
Juan Francisco Estrada 7130504fcf Apply the reprint_pr_changes_diff2.txt provided by @3d-gussner 2023-11-22 12:18:59 +01:00
Juan Francisco Estrada ce135a0976 Added support for reprint and streamed GCODE 2023-11-22 12:14:08 +01:00
Juan Francisco Estrada 532a5b3e2f - Serial message --> /// action:reprint done 
- Yes/no question --> Need to fix the bug related with the filename print --> if (lcd_show_fullscreen_message_yes_no_and_wait_P(altfilename, false, LCD_LEFT_BUTTON_CHOICE)==LCD_LEFT_BUTTON_CHOICE)
 2023-11-22 12:14:00 +01:00
Juan Francisco Estrada 004169034a Remove some MYSERIAL calls 2023-11-22 12:13:24 +01:00
Juan Francisco Estrada ae5fbce6e7 Remove MYSERIAL.println code (debug purpose) and old commented code 2023-11-22 12:13:16 +01:00
Juan Francisco Estrada a52d5430aa Change to enquecommandf_P and enquecommand_P 2023-11-22 12:13:01 +01:00
Juan Francisco Estrada e8a2d4c7e1 Reprint function integrated on 3.13v 2023-11-22 12:11:39 +01:00
3d-gussner 02459edcb6 Rebase fix 
Add documentation
Whitespace
 2023-11-22 08:21:52 +01:00
3d-gussner af79ac0714 Add `SetPrinterState(PrinterState::Idle);` after `lcd_commands_type = LcdCommands::Idle;` 2023-11-22 07:58:17 +01:00
3d-gussner d5d77ee243 Cleanup documentation 2023-11-22 07:58:17 +01:00
3d-gussner 880d2f28bd LCD menu only sends `// action:ready` or `// action:not_ready` via serial 
Host has to send back state with `M72 S1|0` to keep printer and host in sync
Changed LCD menu messages to `Set ready` and `Set not ready`
Updated translations
 2023-11-22 07:58:17 +01:00
3d-gussner 516ae1b952 Update state 2023-11-22 07:58:17 +01:00
3d-gussner d3b98f30a7 Show Set Ready LCD menu only when M79 timer is running. 2023-11-22 07:58:17 +01:00
3d-gussner 514607318e Add printer_state.cpp/.h 2023-11-22 07:58:17 +01:00
3d-gussner d276695ce7 Set Ready 2023-11-22 07:58:13 +01:00
gudnimg 60cb089e96 Show statistics menu for USB/Serial prints 
Change in memory:
Flash: -8 bytes
SRAM: 0 bytes
 2023-11-21 18:38:40 +00:00
gudnimg 331ceaf044 M77: Save statistics when timer is stopped 
For remote hosts, when the timer is stopped, then also save the statistics.

Slightly refactored save_statistics function by removing the parameters.
The function parameters are always the same.

Change in memory:
Flash: -40 bytes
SRAM: 0 bytes
 2023-11-21 18:38:40 +00:00
gudnimg 423f98ff6e Implement Marlin's print job timer 
I changed the code a bit so it would compile
in Prusa Firmware.

The paused duration is no longer included in the
print time statistics.

Change in memory:
Flash: -122 bytes
SRAM: 0 bytes
 2023-11-21 18:38:40 +00:00
3d-gussner 9fd478c9c2
Merge pull request #4173 from gudnimg/disable-heaters-gudni 
optimisation: use `disable_heater()` in more places
 2023-11-20 07:01:05 +01:00
Guðni Már Gilbert 4922bcd7b1
Merge pull request #4408 from gudnimg/PR2390 
PFW-1097 M600: Fix filament change behavior when print is paused
 2023-11-16 07:37:42 +00:00
Guðni Már Gilbert 400722ec67
Merge pull request #4461 from gudnimg/lcd-opt-message 
optimisation: simplify two LCD messages
 2023-11-16 07:37:09 +00:00
3d-gussner e74abb102a
Merge pull request #4494 from gudnimg/issue3122 
Fix #3122
 2023-11-12 17:42:10 +01:00
Guðni Már Gilbert 1e6460c344
Merge pull request #4479 from gudnimg/PFW-1523-2 
PFW-1523 Add the `S` parameter to `M79`
 2023-11-12 16:19:31 +00:00
gudnimg ddbadf4874 Fix #3122 
If the feedrate multiplier is changed while the print is paused
update the saved feedrate multiplier in RAM
 2023-11-12 12:38:05 +00:00
gudnimg 4e6b649865 PFW-1523 Only overwrite name if not SD printing 2023-11-11 16:56:14 +00:00
gudnimg 45880c252b Fix filament change behavior when print is paused 
Reimplementing PR 2390
https://github.com/prusa3d/Prusa-Firmware/pull/2390
from @wavexx
 2023-11-11 16:51:35 +00:00
3d-gussner 0016b77827 Updated MMU serial status message 
- Shown during bootup
- Shown on LCD menue MMU [ON|OFF]
- Shown using `M709`
- Shown when `Disable`d with MMU ERROR FW UPDATE NEEDED
 2023-11-11 12:18:34 +01:00
gudnimg dc280b0d9e power panic: support any valid DOS 8.3 extension 
When a SD file is selected to print
save the DOS 8.3 extension into EEPROM.

After a power outage, the correct file extension is then
selected instead of always assuming it's ".gco"

This allows users to recover ".g" files.

Change in memory:
Flash: +104 bytes
SRAM: 0 bytes
 2023-11-05 16:46:54 +00:00
Guðni Már Gilbert dec5e2c1b4 Refactor menu_action_sdfile 2023-11-05 16:46:54 +00:00
gudnimg 469f002179 optimisation: simplify two LCD messages 
There is no need to restrict how often the message is rendered.
It was being restricted to render every 1 second. We don't do
this for most of the static menus. So I propose this 1 second period
be removed.

Tested on MK3S+

Change in memory:
Flash: -168 bytes
SRAM: -8 bytes
 2023-11-05 12:57:28 +00:00
gudnimg 20a2216623 PFW-1523 Implement S parameter for M79 
Change in memory:
Flash: +112 bytes
SRAM: +3 bytes
 2023-11-04 20:38:50 +00:00
gudnimg 645b11e643 Fix regression in MMU enable menu 
Fixes a regression introduced in https://github.com/prusa3d/Prusa-Firmware/pull/4454
 2023-10-29 16:17:03 +00:00
3d-gussner fe9a8cf8ac Fix PF-build.sh with new cmake 
Same as MK3_3.13.2 branch
 2023-10-17 15:36:54 +02:00
gudnimg 466e562360 PFW-1542 Don't allow starting SD print if there is a fan error 
Apply same conditions as on "Resume print" feature.
Starting a SD print should not be possible if there is an active hardware error
 2023-10-15 12:17:36 +00:00
Alex Voinea 7e88e49b4e Fix tilde in message 2023-10-03 08:19:48 +02:00