c5c4c21124
Update Sensor info menu documentation
2022-09-16 10:17:04 +02:00
bdfd3305cb
Cleanup pat9125.h
2022-09-16 10:17:04 +02:00
c46b97ec2d
Add base code for PAT9125_sensor
2022-09-16 10:17:04 +02:00
90b78616b7
Fix reinit on error
2022-09-16 10:17:04 +02:00
fba6d44f33
fsensor event blanking
2022-09-16 10:17:04 +02:00
52b44ad178
fsensor add deinit
2022-09-16 10:17:04 +02:00
ea23e6d924
Fix MK2 build?
2022-09-16 10:17:04 +02:00
bbe1b1145e
Correct ifdefs for all IR sensor types
2022-09-16 10:17:04 +02:00
a256370c39
Remove original marlin fsensor code
2022-09-16 10:17:04 +02:00
f9ff929bbe
Enable fsensor when preparing for shipping
2022-09-16 10:17:04 +02:00
d2bfe422f1
Separate runout and enabled settings
2022-09-16 10:17:04 +02:00
b741707c0e
Fsensor error state
2022-09-16 10:17:04 +02:00
cfe8444fe3
Revert menu hack
2022-09-16 10:17:04 +02:00
5484882758
Checkpoint after a lot of removal
2022-09-16 10:17:04 +02:00
8fae5e708e
Remove unused fsensor variables
2022-09-16 10:09:20 +02:00
fc49ba115a
Move more IR sensor analog stuff to Filament_sensor.h
2022-09-16 10:09:20 +02:00
b52022f6c6
More dead code removal
2022-09-16 10:08:39 +02:00
241c4cc86c
Remove dead code
2022-09-16 10:08:39 +02:00
6663f719f6
Remove old fsensor_init()
2022-09-16 10:08:39 +02:00
43db24e4fe
IR_sensor_analog voltage readings
2022-09-16 10:08:39 +02:00
7224b5c2b6
Remove OQ and add fancy autoload interaction
2022-09-16 10:08:39 +02:00
d84e6bda63
Remove old fsensor init
2022-09-16 10:07:49 +02:00
338f1f7615
IR volt debugging
2022-09-16 10:07:49 +02:00
f03922f7cf
Fix repeated autoload menu
2022-09-16 10:07:49 +02:00
45e43137a5
Filament sensor refactoring initial
2022-09-16 10:07:49 +02:00
ce0d8f2f12
Correct sensor orientation for old pat9125 init
2022-09-16 10:06:26 +02:00
4f08caaa2b
Shorter TWI timeout
2022-09-16 10:06:26 +02:00
47e610a2c6
Add disable() to swi2c as well
2022-09-16 10:06:26 +02:00
abbf2a3927
twi safe init
2022-09-16 10:06:26 +02:00
28c527fece
Use _check instead of register read for probe()
2022-09-16 10:06:26 +02:00
54b98c4e63
swi2c safe init
2022-09-16 10:06:26 +02:00
8b9bb23652
Unflip the hardcoded flip of the Y axis
2022-09-16 10:06:26 +02:00
f4dbf424e4
Use PAT9125 new init sequence
2022-09-16 10:06:26 +02:00
d706ebb556
Update forgotten MSG_ c=
2022-09-14 11:33:24 +02:00
6e3be50389
Clean up
2022-09-14 11:33:24 +02:00
f65e8ae5dd
Add MSG_ALWAYS
2022-09-14 11:33:24 +02:00
129b646c58
Fix MSG_ c=
...
Add MSG_ to messages.c/h
2022-09-14 11:33:24 +02:00
ee6821eb0e
Add missing MSG_ c= r=
2022-09-14 11:33:24 +02:00
270a1086ab
No translation needed
2022-09-14 11:33:24 +02:00
0a68de0bbe
Update MSG c=xx
...
Mark unused strings as `_n`
2022-09-14 11:33:24 +02:00
fd2d62dcd4
Set reserved space back after cherry-pick
2022-09-14 11:33:24 +02:00
83315d0494
Update config.h translation documentation and move language to group2
...
Update fw-build.sh
- Output used space of each translation (easier to troubleshoot)
- Read config.h max size per translation
- output variant .map files (easier to troubleshoot and finding missing/unused messages)
2022-09-14 11:33:24 +02:00
35c3e3ce68
Remove MSG_M117_V2_CALIBRATION
...
This message is never actually shown on the LCD (it's immediately
overwritten by other content). It also include g-code in a translatable
string, which is not a good idea. It's also otherwise identical to
MSG_V2_CALIBRATION, which we should have used.
Just remove it and save some space in the process.
2022-09-14 11:33:24 +02:00
c7354bdfe8
lang: Fix usage of new non-translated strings
...
Fix cherry-pick
2022-09-14 11:33:24 +02:00
7a80252556
lang: Add support for raw catalog references with _R
...
_R marks a raw catalog entry as Referenced (= used) for cases where the
catalog pointers are handled at a lower level.
2022-09-14 11:33:24 +02:00
05093fbf49
lang: Add inline documentation for the various language macros
2022-09-14 11:33:24 +02:00
510f13b24a
Make the diag pins open collector with pullup.
...
Solves random crash detected on startup
2022-09-14 07:39:47 +02:00
bb57d99c35
Remove the crashDetection software counters and use sfilt
2022-09-14 07:39:47 +02:00
996f9943a1
Extract PRINTER_ACTIVE into a noinline function
...
Having the original PRINTER_ACTIVE macro copied at multiple spots doesn't make sense.
Refactoring it into a non-inline function saved ~400 bytes of code.
It should be safe in terms of performance, all occurrences are at non-time critical spots.
2022-09-14 07:31:39 +02:00
16d666302b
Allow choice positioning. Balance Yes/No messages.
...
Add an additional parameter to control the position of second choice
prompt position (while defaulting to the old).
This allows Yes/No prompts to be equally spaced.
2022-09-14 07:30:57 +02:00
b41fb8a13a
Unify fullscreen/multiscreen/yes-no prompt message handling
...
Modify lcd_show_multiscreen_message_two_choices_and_wait_P to also
handle single-screen or empty (no-clear) prompts, making other functions
redundant. Saves 76 bytes.
Change existing functions to simply call
lcd_show_multiscreen_message_two_choices_and_wait_P with the correct
arguments.
This changes the prompt of existing Yes/No messages: the previous prompt
would use the last two lines of the LCD, while the new prompt is using
just the last line of the LCD instead.
Translation do not require updates, since the Yes/No translation was
already the same in both implementations.
2022-09-14 07:30:57 +02:00
d78506a8ea
TM: Rename D70 I to D70 S for consistency with M310 S
2022-09-02 15:59:29 +02:00
9dbee61b74
TM: Remove an unnecessary fabsf call
...
Ironically gcc was stripping that one for us already.
2022-09-02 15:59:29 +02:00
81238fbb15
Move MSG_PAUSED_THERMAL_ERROR outside TEMP_MODEL
...
MSG_PAUSED_THERMAL_ERROR is not specific to model-checking and can be
used also on MK25* variants.
2022-09-02 15:59:29 +02:00
b48c698562
TM: Update default C/R0 estimates for MK3/MK3S variants
2022-09-02 15:59:29 +02:00
10c524fdb3
TM: Add M310 [F] parameter to enable autotune self-test
2022-09-02 15:59:29 +02:00
9b9ce1733c
TM: Allow to keep model checking enabled during autotuning
...
Allow running the model checking during autotuning, with the only
exception being the parameter estimation stage where we alter the same
value which is used by the checker (done to conserve memory/code).
With previous changes the model checker will disable/enable itself when
passing through an unavailable R vector entry, allowing to start the
calibration by checking only the stages where the part fan is disabled.
The C/R0 values should be stable enough to provide a fail-safe mechanism
for printers of the same variant right from the factory.
2022-09-02 15:59:29 +02:00
ff459a6427
TM: Handle dynamic parameter changing
...
Instead of assuming the model state is always valid, allow NAN values to
pass-through the various check/estimation stages.
This allows running the model checker with incomplete parameters (for
example, missing entries in the R vector) and resume automatically.
2022-09-02 15:59:29 +02:00
54e5702f30
TM: Move initial R0 initialization closer to usage
2022-09-02 15:59:29 +02:00
9b5ef75b68
Correctly translate thermal model LCD messages
2022-09-02 15:59:29 +02:00
331de988f7
TM: Avoid an useless float promotion
2022-09-02 15:59:29 +02:00
66b97683bb
Update build.sh and travis to build EN_ONLY
...
Change FARM_MODE
- Active only on EINSYs in EN_ONLY
- Active on miniRAMBo in all languages
2022-08-30 13:57:43 +02:00
f5840e1b02
Fix minirambo build
2022-08-30 13:57:43 +02:00
d1c545fdd6
Disable farm mode in config file
2022-08-30 13:57:43 +02:00
ec84c22865
Remove unused define
2022-08-30 13:57:43 +02:00
2959cc0b64
Do not compile farm lcd_commands
2022-08-30 13:57:43 +02:00
2b4c2127e6
Make lcd function static
2022-08-30 13:57:43 +02:00
3537024ba2
Remove forgotten config in MK2_minirambo_1.0a
2022-08-30 13:57:43 +02:00
8033b65a02
Isolate farm preheat config
2022-08-30 13:57:43 +02:00
435ee66bdd
Move all farm configuration to header
2022-08-30 13:57:43 +02:00
d049d09623
Isolate FARM_DEFAULT_SAFETYTIMER_TIME_ms
2022-08-30 13:57:43 +02:00
39eb728d54
More farm optimizations
...
Kudos @gudnimg
2022-08-30 13:57:43 +02:00
d1c30c338f
Fix farmless mode
2022-08-30 13:57:43 +02:00
bef7b086e3
Isolate the entire farm and statistics code
2022-08-30 13:57:43 +02:00
7d597eb8b0
Move farm mode to separate file
2022-08-30 13:57:43 +02:00
4e7d686b83
Merge pull request #3574 from leptun/extra_optimizations
...
More optimizations for 3.12 to fit
2022-08-29 19:25:46 +03:00
692f51c51e
Save target bed temperature, not current temperature
2022-08-28 11:21:17 +03:00
37c9dcbe53
Optimise calculations to use hypot() where possible
...
flash: -122
RAM: 0
It is defined: hypot(x,y) = sqrtf(x*x + y*y)
2022-08-26 19:36:28 +03:00
7d72f0ee2e
better lcd printing for IP address
...
flash: -46
RAM: 0
2022-08-26 19:33:53 +03:00
4e798c9ed1
Remove unused variable maxlimit_status
...
flash: 0
RAM: -1
2022-08-26 19:29:32 +03:00
7711969e57
ftostr12ns: change xx from long to int
...
flash: -44
RAM: 0
Largest expected number is 999 after the multiplication by 100.
I measured the execution time drops from ~170us to ~73us.
2022-08-26 19:28:36 +03:00
88e0e33fb2
Use set_destination_to_current instead of memcpy
...
flash: -14
RAM: 0
2022-08-26 19:27:16 +03:00
7d86a0d121
Reduce a few magic numbers for FILENAME_LENGTH
...
flash: 0
RAM: 0
2022-08-26 19:26:26 +03:00
22582e560e
Remove one redundant st_synchronize() call
...
flash: -4
RAM: 0
st_synchronize() is called just before leaving gcode_G28() so we don't need to call it again just after leaving gcode_G28()
2022-08-26 19:25:07 +03:00
89fc9f7a62
Optimise lcd_menu_show_sensors_state()
...
flash: -22
RAM: 0
menu_lcd_lcdupdate_func() takes care of starting lcd_timeoutToStatus if the knob is clicked.
When the knob is clicked we only want to back out of the menu.
This changes makes the menus slightly more conistant behind the scenes.
2022-08-26 19:22:23 +03:00
c2340d3648
lcd_babystep_z should not start lcd_timeoutToStatus
...
flash: -8
RAM: 0
When the menu is entered and left the function
menu_lcd_lcdupdate_func() takes care of resetting the timer.
Currently the firmware will reset the timer twice when the lcd_babystep_z menu is entered. This commit fixes that.
2022-08-26 19:20:22 +03:00
74d6aead2f
Optimise if statements in lcd_tune_menu
...
flash: -10
RAM: 0
I am basically combining two if statements if(SilentModeMenu == SILENT_MODE_NORMAL)
2022-08-26 19:17:07 +03:00
25350dfbbc
Remove unused variable bFilamentFirstRun
...
flash: 0
RAM: -1
2022-08-26 19:14:40 +03:00
4ded6f195e
Move string to progmem
...
flash: -52
RAM: -6
2022-08-26 18:59:53 +03:00
f7ae3039f8
Don't include M851 in build if Auto Bed Leveling is not enabled
...
The variable cs.zprobe_zoffset is not used unless
auto bed leveling is enabled
2022-08-26 15:35:28 +00:00
d87999a020
workDirDepth can be one byte
...
We set the max working directory depth to 6 (see MAX_DIR_DEPTH)
Changes save 1 byte of SRAM and 50 bytes of flash
2022-08-26 10:56:02 +02:00
c7762386df
Merge pull request #3565 from wavexx/m115_respect_settings
...
Do not prompt on M115 if FW version check has been disabled
2022-08-25 19:43:12 +03:00
cf1edc85c3
Set a few function attributes to conserve space
2022-08-25 16:50:06 +02:00
7c8539a9f9
Report correct fan speeds in M155 during calibration
2022-08-25 16:15:51 +02:00
78534f3b48
Start at the first segment, not the last segment
2022-08-24 20:19:26 +03:00
671519caf3
Optimize by hand since the lto is still stooopit
...
saves ~100B
2022-08-24 20:19:26 +03:00
b27c8b50e0
Fix power panic handling
2022-08-24 20:19:26 +03:00
05bd1ba57f
Multi-segment pause resume initial
2022-08-24 20:19:26 +03:00
2e677ea3ee
Merge pull request #3569 from leptun/fix_card_removed
...
Fix "Card removed" on startup
2022-08-24 19:17:24 +02:00
0933fdb6fe
Merge pull request #3552 from wavexx/temp_model_check
...
Thermal Model protection
2022-08-24 19:16:48 +02:00
Alex Voinea
3d-gussner
Yuri D'Elia
D.R.racer
Guðni Már Gilbert
DRracer