f160f5594d
PFW-1397 cleanup statistics menu
...
Change in memory:
Flash: -18 bytes
SRAM: -1 byte
2022-11-08 13:49:40 +01:00
82bd9db1d6
PFW-1397 Implement ON_MENU_ENTER to simplify code
...
ON_MENU_ENTER runs code within the brackets only once
after a new menu is entered.
For the tool change menu, this allows us to display the data and
read from EEPROM only once.
2022-11-08 13:49:40 +01:00
a896dfd4e0
PFW-1397 To reserve EEPROM write cycles, only update toolchange counter when a print finishes or is stopped
2022-11-08 13:49:40 +01:00
3120bf0aa2
PFW-1397 Implement new function increment_tool_change_counter()
...
Reduces flash consumption by 44 bytes
2022-11-08 13:49:40 +01:00
fcfb868167
PFW-1397 Add a temporary menu item to show the statistic
...
The location of the menu has not been decided. Currently I placed it where convenient.
2022-11-08 13:49:40 +01:00
5a60a85467
PFW-1397 Increment toolchange statistic
2022-11-08 13:49:40 +01:00
0af7d28074
PFW-1397 Allocate EEPROM memory for toolchange counter
2022-11-08 13:49:40 +01:00
7fe22e8f79
Fix long-press LCD inactivity timeout
...
Fixes #3715
When a long-press is triggered, the LCD inactivity timer
needs to be restarted. This is done with lcd_timeoutToStatus.start()
This also fixes situations where a long-press is triggered, and the timer
times out immediately (because it was not reset properly)
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2022-11-06 13:43:14 +00:00
853adbf411
Bump up build number
...
+1 for commit
+1 for merge
2022-11-04 11:16:07 +01:00
7c009cadb8
Bump up Revision to ALPHA1 6051
...
Temporary fix for MSG_BTN_MORE
pre-release pot and po update
2022-11-04 10:21:39 +01:00
7b20f8c6f3
Merge pull request #3717 from 3d-gussner/MK3_Temp_Model_menu
...
Add Menu `Calibration -> Temp. model cal`
2022-11-03 12:12:55 +01:00
1e0909d50c
Disable `Error:` messages for MMU2 errors
2022-11-03 12:09:03 +01:00
8543942acb
Fix Z-leveling
2022-11-03 06:22:57 +01:00
fd6da0e766
Fix typo
...
Add lcd_setatatus_serial to output lcd status message and serial at the same time
2022-11-02 10:09:32 +01:00
7bc7f21fa5
mmu: move RetryIfPossible outside the error screen
...
This fixes issue where 'retryAttempts=3' may be spammed in the logs
Change in memory:
Flash: 0 bytes
SRAM: 0 bytes
2022-11-01 06:22:39 +01:00
2ac2cd2255
Fix MK25/S builds
2022-10-26 14:27:22 +02:00
072b3f8300
Temp Model cal. menu
2022-10-26 13:34:27 +02:00
f4a2c1c794
Update translations
...
Fix button msg
Update Dutch `F. jam detect`
2022-10-25 10:29:35 +02:00
45c72d48ed
optimisation: use failstats_reset_print in factory_reset_stats
...
Change in memory:
Flash: -56 bytes
SRAM: 0 bytes
2022-10-23 09:58:56 +00:00
edc5d013dd
Merge pull request #3698 from leptun/farm_presort_cache
...
Farm mode: cache filenames in the presort function
2022-10-21 15:43:49 +02:00
b792d47350
Merge pull request #3694 from 3d-gussner/MK3_Hotend_fan
...
PFW-1415: Rename `Extruder fan` to `Hotend fan`
2022-10-19 08:47:15 +02:00
b485992c9e
If in farm mode, force the sorting direction to be reversed
...
So in an ideal scenario, the newest file is first. This of course breaks as soon as a file is deleted/renamed/moved, but it should at least be fixed now compared to before where the direction could be influenced by a disabled setting
2022-10-18 17:29:31 +02:00
798f215f88
Refactor SD menu settings
2022-10-18 17:24:35 +02:00
eaaf1d6872
Rename Sheets
...
- `Satin 1` to `Satin `
- `Satin 2` to `NylonPA`
2022-10-18 10:20:01 +02:00
e18bfce597
Farm mode: cache filenames in the presort function
2022-10-17 20:17:28 +02:00
e83728f72c
Change fan RPM display to 5 digits
...
All credits to @ WarrenSchultz for initial PR https://github.com/prusa3d/Prusa-Firmware/pull/3656
2022-10-17 15:41:05 +02:00
f2fe9a51ee
rename `Extruder fan` to `Hotend fan`
2022-10-17 13:49:18 +02:00
2682b64a09
Optimisation: Reduce code size in rendering SD file names and folders
...
Change in memory:
Flash: -88 bytes
SRAM: 0 bytes
2022-10-12 20:19:21 +00:00
2c695f14be
Increase required MMU version to 2.1.4.x
2022-10-12 07:45:13 +02:00
6eab0dda59
Add parentheses - be more explicit in error codes' masking and comparison
2022-10-11 15:51:01 +02:00
0aeb74e5b1
Intercept M708 A0xb: set ExtraLoadDistance on the printer side too
2022-10-11 15:51:01 +02:00
b0466ae20f
Add infrastructure for MMU parametrization after comm start
...
For now, only the Extra loading distance is being sent, but the infrastructure can be easily extended for other registers as well.
2022-10-11 15:51:01 +02:00
c7e4c9ce99
Allow backwards compatibility with legacy MMU g-codes
...
This piece just changes the default extra load length on the MK3 side.
The same needs to be done on the MMU side but:
- the MMU exposes its register for this (so we can change the extra load distance by writing into the register via G-code)
- the printer shall probably set this value on its own after line up of MMU communication
2022-10-11 15:51:01 +02:00
013ce588a5
Support reading/polling multiple registers
...
In Idle and Command mode it is now possible to specify a list of registers which shall be periodically read from the MMU.
To keep the code and RAM size down registers are intentionally separated into 8bit and 16bit sets.
Adding a register into the set is just a matter of parametrization, there is no need to change the state machines anymore.
2022-10-11 15:51:01 +02:00
ebb79351a7
Add preliminary support for MMU_SELFTEST_FAILED error messages
2022-10-11 15:51:01 +02:00
d5ca47d1a6
Merge pull request #3646 from gudnimg/fix-mmu-buttons-v2
...
PFW-1403 Fix issue where physical MMU buttons do not dismiss error screen
2022-10-11 13:42:39 +02:00
8882d8f2c8
Only move XY when position is known
...
I had a crash when producing an error screen and printer was unhomed.
Extruder was located at the far right side, and immediately crashed when attempting to park.
2022-10-11 07:16:52 +02:00
9f3361577e
Merge pull request #3643 from gudnimg/PFW-1358
...
PFW-1358 More button utilizes text and an empty character on the right
2022-10-10 18:02:22 +00:00
98cfc37017
Merge pull request #3674 from gudnimg/mmu-first-lay-cal-purge-line
...
MMU: Sync first layer purge line with PrusaSlicer generated output
2022-10-10 17:59:18 +00:00
213f0e8c71
PFW-1358 Update second_col description
...
Value is no longer hardcoded
2022-10-10 17:48:56 +00:00
eb43d712df
Enable MISO pullup during SD CMD0
...
Fix typo
2022-10-10 09:43:50 +02:00
ccf0c0a09f
Merge pull request #3675 from gudnimg/pad-mmu-status-messages
...
Fix issue where MMU status messages are not padded
2022-10-09 10:49:55 +00:00
1c6345a85b
Fix issue where MMU status messages were not padded
...
Also combined common cases to reduce code size
2022-10-09 10:37:33 +00:00
76dc51d2f0
Sync first layer purge line with PrusaSlicer generated output
...
If you generate a multicolor gcode file with PrusaSlicer, the purge
line gcode will look like this.
This reduces clicking sounds from the extruder, filament extrusion is reduced by 6mm.
2022-10-09 10:03:54 +00:00
d483531606
PFW-1358 update c values
2022-10-08 09:40:43 +00:00
00ccdcd467
PFW-1358 change MSG_BTN_MORE from I1 to N1
2022-10-08 09:25:06 +00:00
d6e0f47739
PFW-1403 Rename ReportErrorSource to ErrorSource for shorter code
2022-10-08 08:51:32 +00:00
33690b927a
PFW-1403 Fix issue where physical MMU buttons do not dismiss error screen
2022-10-08 08:51:32 +00:00
8f0de44d84
PFW-1358 Move 'More' button to the corner of the screen
...
Make 'More' button position consistent with 3-button screen.
2022-10-08 08:50:40 +00:00
7264391c5f
PFW-1358 Fix and optimise button choice positions
2022-10-08 08:50:40 +00:00
9046fb3d44
PFW-1358 Adjust positions of button choices
2022-10-08 08:50:39 +00:00
06427087c0
PFW-1358 Change "More" button to single character
2022-10-08 08:50:39 +00:00
233174cf86
Fill the doc for the EEPROM value at 0x0DA1 - active_sheet
2022-10-07 11:59:57 +02:00
2067cddc46
Merge pull request #3631 from 3d-gussner/MK3_fix_eeprom_documentation_part1
...
MK3 fix eeprom doxygen documentation
2022-10-06 15:29:15 +02:00
629fc9d0f1
Merge pull request #3638 from wavexx/tm_cal_click
...
TM: Consume LCD click after calibration
2022-10-06 14:29:40 +02:00
bab83704a1
Fix Typo 0X0 to 0x0
2022-10-06 13:23:16 +02:00
bfaed2768c
Merge pull request #3652 from wavexx/cmake_build_v2
...
cmake build improvements v2
2022-10-05 14:20:28 +02:00
d867da201f
cmake: Define FW_VARIANT instead of copying Configuration_prusa
2022-10-05 01:26:30 +02:00
1d3ee1caba
build: Add Configuration_var.h as a configuration wrapper
...
Instead of including Configuration_prusa.h directly, include
Configuration_var which then includes the proper variant file though a
preprocessor macro.
This allows to keep the existing build system intact, but also redefine
at compile time the final header without having to make copies on the
file system.
2022-10-05 01:26:26 +02:00
2ae376d633
build: Size optimization
...
Explicitly force-noinline xyzcal_scan_pixels_32x32_Zhop to match the
previous LTO build behavior.
2022-10-04 12:13:09 +02:00
5ed6bd7f8b
cleanup: Fix more spourious missing return warnings
...
Rewrite to use a temporary and get rid of the warning.
The generated asm is *unchanged*.
2022-10-03 21:54:08 +02:00
992845198d
Merge pull request #3648 from wavexx/more_cleanups
...
cleanup: Expand tabs to fixup suspicious indentation warnings
2022-10-03 11:53:42 +02:00
4cc6695195
cleanup: Expand tabs to fixup suspicious indentation warnings
2022-10-02 20:42:36 +02:00
a8e85bd146
cmake: Work-around gcc 7 not supporting SOURCE_DATE_EPOCH
2022-10-02 20:32:32 +02:00
1d520f9165
cmake: Make builds fully reproducible by default
...
- Work-around SOURCE flags being reset for each project when setting the
random-seed property by calling a support function.
- Likewise, set correct flags for reproducibility when creating archives.
- Strip source prefix paths from debug info
This should set the EPOCH using the last git commit date when available,
but it's not currently implemented. Just set the EPOCH to be 0 for now.
2022-10-02 20:32:32 +02:00
d8c9c4450f
Merge pull request #3641 from vintagepc/build-with-cmake
...
Build the firmware with cmake
2022-10-02 13:05:32 -04:00
c7b6b9a99b
cleanup: Suppress unused argument warnings
2022-09-30 15:08:11 +02:00
c522330433
Merge remote-tracking branch 'upstream/MK3' into build-with-cmake
2022-09-30 09:04:35 -04:00
49f96213a4
Also consume longpress in lcd_consume_click()
2022-09-30 14:29:37 +02:00
b95d508574
cleanup: Remove implicit fallthrough in CRC validation
2022-09-30 12:55:47 +02:00
71be6b19d4
cleanup: Remove return value from MMU2Serial::write()
...
Removes a missing return warning.
Looks like we don't handle overflow at the moment and in all surrounding
code, so let's remove the return value for now.
2022-09-30 12:55:47 +02:00
6cfe000ac9
cleanup: Reorder members to match initialization order
2022-09-30 12:55:47 +02:00
398a4bf403
cleanup: Do not return const values from functions
...
This generates a warning under -Wextra, since in most cases a const
value doesn't prevent buggy code (as copies are allowed) while
preventing some optimizations (such as move operations) to take place.
2022-09-30 12:55:47 +02:00
d6af13dfc1
cleanup: Supress missing return warnings
...
Rewrite the function with a temporary to avoid the spourious no-return
warning.
The generated code is *unchanged*.
2022-09-30 12:31:07 +02:00
31ea48246a
TM: Consume LCD click after calibration
...
Consume any pending LCD click after the temperature model calibration.
Since we're already in the status menu, the usual consume action is not
done automatically here.
2022-09-30 12:24:54 +02:00
74e15ac233
Rename EN_ONLY to EN_FARM
...
remove DEBUG/DEVEL/ALPHA/BETA lcd warning
2022-09-29 16:39:02 +02:00
346dfbdbb3
Fix MSG_SPOOL_JOIN
2022-09-29 10:54:46 +02:00
c7b500af1e
BETA firmware message only in English
...
Rephrase BETA firmware message to fit on two screens
ALPHA message same as DEVEL
Fix ALPHA DEVEL message
2022-09-29 10:48:16 +02:00
1a8f18318c
Add Temp Model eeprom documentation
2022-09-28 18:15:23 +02:00
302e4b679c
replace tab with spaces
2022-09-28 17:37:46 +02:00
709d07310a
lcd_print_pad: do not overflow len when truncating the string
2022-09-26 11:26:10 +02:00
7fb53899dc
Merge branch 'MK3' into MK3_MMU2_fix1
2022-09-23 14:55:23 +02:00
26b091d50e
Remove unneeded lcd_finishstatus()
2022-09-23 11:54:16 +02:00
80c06bda55
Improve warning behavior during thermal anomaly
...
The current code forces any warning to return the user to the status
screen in order to show the message.
Thermal anomaly warnings can repeat at very short intervals, making menu
navigation (to pause/tune the print) impossible.
We now check if the message to be displayed is the same and only force a
kickback for new messages.
This partially reverts https://github.com/prusa3d/Prusa-Firmware/pull/3600
since we need the string to be null terminated for ease of comparison.
We pad the status line at display time instead using the new
lcd_print_pad() function which achieves the same effect.
2022-09-22 16:12:35 +02:00
24b638b5d4
fixed undefined behaviour when left shifting a negative number
2022-09-21 16:21:19 +02:00
9a9aadca87
Do not hang during startup
...
In ultralcd_init() do not use lcd_setstatuspgm() to initialize the
welcome message.
The internal call to lcd_finishstatus() requires the serial to be
already available. Split the function into lcd_padstatus() to pre-pad
the string and save some space.
2022-09-21 16:12:16 +02:00
f7d4095479
Merge branch 'MK3' into MK3_MMU2_fix1
2022-09-21 15:18:44 +02:00
2cdd3ba364
Move strings to progmem
2022-09-21 14:53:54 +02:00
16d1ef8510
Merge pull request #3560 from leptun/splash_version
...
Show firmware version on splash screen
2022-09-21 14:47:41 +02:00
a1213d6a6e
Merge pull request #3600 from gudnimg/init-lcd-status
...
Fix initialization of LCD status line message
2022-09-21 14:46:10 +02:00
ca9a28eff2
Merge pull request #3612 from wavexx/tm_update_r0
...
Temperature model: update R0 estimate
2022-09-21 14:46:03 +02:00
bccdab4c22
Merge pull request #3615 from wavexx/line_cnt_reset_fix
...
Do not reset line on serial commands without N
2022-09-21 14:45:46 +02:00
183e21aa0b
Merge pull request #3599 from 3d-gussner/MK3_MMU2_messages
...
PFW-1339 - Update MMU2 translations
2022-09-21 10:27:01 +02:00
129df6dd4a
Do not reset line on serial commands without N
...
Fix regression introduced in fc10ca3146
2022-09-21 10:19:16 +02:00
1c4e9463ec
Temperature model: update R0 estimate
...
Update the default R0 estimate thanks to a larger dataset.
This improves the error margin during self-check.
2022-09-20 16:57:54 +02:00
eb7de5149b
Don't inline the function
...
Change in memory:
Flash: -44 bytes
SRAM: 0 bytes
2022-09-20 06:34:24 +02:00
c8a8484ca7
Remove atomic_update parameter
...
Change in memory:
Flash: +24 bytes
SRAM: -0 byte
2022-09-20 06:34:24 +02:00
76fb4610ea
Optimisation: Remove duplicated code in cmdqueue_could_enqueue_back()
...
Code is 28 lines shorter :)
Change in memory:
Flash: -42 bytes
SRAM: 0 bytes
2022-09-20 06:34:24 +02:00
156b5e5b99
Update current FW version
2022-09-19 18:15:39 +02:00
6a470791d3
Allow sending uint16_t values to registers
2022-09-19 15:13:37 +02:00
770fdcd83b
Fix typo, thanks to @gudnimg
2022-09-19 08:02:40 +02:00
28b0ef1acb
PFW-1369 Use same ramming sequence as default settings in Slicer
2022-09-19 07:23:03 +02:00
075a80e264
Add missing text
...
Finish Dutch translation
2022-09-17 17:38:45 +02:00
068f4763e2
Update translatable strings to match our extraction macros
...
Update pot and po files
2022-09-17 16:53:30 +02:00
47d7ea5dfd
Add MSG_LOAD_ALL and replace it a two loactions -10bytes flash
2022-09-17 16:36:09 +02:00
25a7dc8397
Fix: Filament Already Loaded only has two buttons
2022-09-17 16:36:09 +02:00
15a8c8fe37
Fix: Unload Manually did not send any button to the MMU
2022-09-17 16:36:09 +02:00
9b4a621275
Fix: Fsensor errors only have one reset button
2022-09-17 16:36:09 +02:00
037d51b049
Fix: Filament Already Loaded only has two buttons
2022-09-17 12:21:42 +02:00
3b60b894da
Fix: Unload Manually did not send any button to the MMU
2022-09-17 12:21:42 +02:00
e7b7d97f11
Fix: Fsensor errors only have one reset button
2022-09-17 12:21:42 +02:00
be7c1d55c8
Remove redundant for-loop
...
Now that lcd_status_message is now initialised correctly at boot-up,
this for-loop is no longer required. Now lcd_status_message is
only set in lcd_updatestatus() which always calls lcd_finishstatus()
lcd_finishstatus() makes sure the message does not exceed 20 characters
Saves 34 bytes of flash
2022-09-17 09:13:07 +00:00
4d6d267aef
Don't initialise lcd status message in definition
...
static variables are automatically zero initialised. Now that the
status line message is initialised in ultralcd_init(), we don't
need to set the variable in global scope.
Saves 22 bytes of flash and 1 byte of SRAM
2022-09-17 08:57:30 +00:00
f1e127ace4
Initialise status line message in setup()
...
Fixes #3581
2022-09-17 08:53:36 +00:00
404c622301
Finish German translation
...
increase 2nd langusge size to 0x3500 13567bytes to fit mmu2 translations 🤞
2022-09-17 10:35:30 +02:00
ec22e5faeb
Shorten message to 20 chars
...
add 01234567890123456789 ruler
2022-09-17 10:34:24 +02:00
539cdbfeea
Lower MSG_ rows
2022-09-17 08:48:56 +02:00
78fdf33f67
Update Firmware.pot and Firmware_de.po
...
Started German translation Part 1
Updated c= r= for German translations being longer than 8 rows
2022-09-16 20:42:50 +02:00
8480c1cb7a
Added //#define FARM_CONNECT_MESSAGE
2022-09-16 19:33:22 +02:00
88b58cdcd5
Update messages missing c= r=
...
Change MMU2 KEEPALIVE_STATE to IN_PROCESS
2022-09-16 19:24:11 +02:00
f4f09e4062
update mmu2 messages c= r= values
2022-09-16 19:18:23 +02:00
0f8d84082a
Update button menu documentation as there are 1/2/3 options
2022-09-16 19:11:11 +02:00
9d959f5d12
Prepare progress messages for translation
...
Remove duplicate messages
2022-09-16 19:08:06 +02:00
89a03c1f0d
MMU2/lang: Update translatable strings to match our extraction macros
2022-09-16 19:02:04 +02:00
50b6044703
Use origin message on serial
2022-09-16 18:17:50 +02:00
3f6b05cc35
Remove PAT9125 stats as these aren't different to IR stats
2022-09-16 18:04:21 +02:00
2ba863d8a5
Reuse MSG_IR_0x_OR_..
...
fix lowercase
remove todos
2022-09-16 17:23:38 +02:00
edad625cf7
RIP Bondtech long live the Extruder
2022-09-16 16:31:27 +02:00
37cde856e9
Rename Auto_deplete to Spool_join
...
Fix some missing MSG_ c= r=
2022-09-16 16:25:47 +02:00
f18493f361
Save some space due to shorter MMU error texts
...
applies https://github.com/prusa3d/Prusa-Error-Codes/pull/62
2022-09-16 12:12:08 +02:00
2d98cae8bd
Fixup MK3_MMU2 branch after rebase onto MK3
2022-09-16 11:08:03 +02:00
16713aa25a
Optimisation: scopeState is already set by SendReadRegister
...
Saves 2 bytes of flash
2022-09-16 10:23:47 +02:00
e9f5a95d4b
PFW-1362 Make sure FINDA runout is impossible with MMU disabled
...
Since mmu_loop() is called in the main loop() function
when the MMU is disabled, we need to utilise the
MMU protocol layer to prevent FINDA runout from happening
if MMU is disabled.
We also need to keep in mind we probably can't trigger
a FINDA runout in the middle of a Q0 query.
So my solution now is to wait for the "Finished" state
and check if the FINDA is off during printing.
When "Finished" state appears, the FINDA value should be up
to date.
2022-09-16 10:23:47 +02:00
94119744ad
PFW-1362 Change isSpoolJoinEnabled to return bool
2022-09-16 10:23:47 +02:00
65a0036dbe
PFW-1362 Optimise debug message
...
Saves 20 bytes of flash :)
2022-09-16 10:23:47 +02:00
998ed87f25
PFW-1362 Use PROGMEM messages
...
The main purpose of these two messages is just to see if SpoolJoin is enabled or not.
"On" and "Off" are descriptive enough.
Saves 16 bytes of flash
2022-09-16 10:23:47 +02:00
63b4abb66d
PFW-1362 SpoolJoin needs to known what the previous slot was
2022-09-16 10:23:47 +02:00
1010f23959
Fix an issue where findaPressed is never set
...
This caused instant FINDA runout when the print starts. Now fixed :)
2022-09-16 10:23:47 +02:00
b292a5bf4e
PFW-1362 temporarily don't use SpoolJoin in Tcodes
...
I think in the current implementation, this will cause more harm than good.
But we can improve SpoolJoin later
2022-09-16 10:23:47 +02:00
7dcfc1484e
PFW-1362 temporary debug messages
2022-09-16 10:23:47 +02:00
8610636906
PFW-1362 Add a log when FINDA filament runout is triggered
2022-09-16 10:23:47 +02:00
c5bb34f226
PFW-1362 Show if SpoolJoin is enabled or disabled at bootup
2022-09-16 10:23:47 +02:00
fb27a7d72b
PFW-1362 Remove "NA" EEPROM status
2022-09-16 10:23:47 +02:00
166ecbc7d8
PFW-1362 Fsensor is not required for Spooljoin
...
Since the Fsensor is not required to use SpoolJoin,
it makes little sense to me that we need the fsensor
to "enable" SpoolJoin
2022-09-16 10:23:47 +02:00
d51026d8f7
PFW-1362 Rename settings for consistency
2022-09-16 10:23:47 +02:00
7c95f87867
PFW-1362 Fsensor status is not required for SpoolJoin
2022-09-16 10:23:47 +02:00
715af8fcc2
Rename files to SpoolJoin
2022-09-16 10:23:47 +02:00
afc67332c7
PFW-1362 Initial commit
2022-09-16 10:23:47 +02:00
2276217cbb
Optimisation: Remove forceMenuExpire variable
...
During first layer calibration we have the live Z baby step menu
on the LCD and the user can tune their Z offset live.
Once the first layer calibration is done, we want to exit the menu
immediately. For this purpose it is much more efficient to
call lcd_return_to_status(). There is no visual difference
on the LCD for the user.
Change in memory footprint:
Flash: -34 bytes
SRAM: -1 byte
2022-09-16 10:23:47 +02:00
e39d1458a1
Fix lost changes during rebase
2022-09-16 10:23:47 +02:00
Guðni Már Gilbert
3d-gussner
DRracer
Alex Voinea
D.R.racer
Tomáš Jozífek
Yuri D'Elia
Yuri D'Elia
vintagepc
Tom Mittendorf
Guðni Már Gilbert