0c453b53cd
Merge pull request #4193 from gudnimg/unload-sequence-improvements
...
Fix unload sequence for users without MMU
2023-05-10 07:29:16 +02:00
3c79e77220
Create define for two hardcoded values
2023-05-08 19:50:51 +00:00
e24c2200f1
Set FILAMENTCHANGE_FINALRETRACT instead of hardcoded 0
2023-05-08 19:33:42 +00:00
8d1abf772d
Merge pull request #4192 from gudnimg/PFW-1506
...
PFW-1506 Load to nozzle: Fix too short purge distance
2023-05-08 13:14:47 +02:00
d781dae35b
Combine two moves since they have the same feedrate
...
Change in memory:
Flash: -60 bytes
SRAM: 0 bytes
2023-05-06 15:24:54 +00:00
8556336185
Fix unload sequence for users without MMU
...
Restores 3.12 sequence which was working well before.
M600 "L" parameter now works like M702 "U" parameter.
Removed a lot of the unused parameters which were copied
from Marlin 2.
Change in memory:
Flash: +96 bytes
2023-05-06 15:24:54 +00:00
e336e2ad08
Fix merge conflict/resync
2023-05-06 11:22:31 -04:00
dd9df36375
Load to nozzle: Fix too short purge distance
...
PFW-1506
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2023-05-06 13:19:57 +00:00
462535ef7f
Restore 3.12 live Z-adjust menu behavior
...
Code size increases a bit but keep in mind the PR
that broke the behavior "saved" 182 bytes:
https://github.com/prusa3d/Prusa-Firmware/pull/4063
So I think this code size increase is OK
Change in memory:
Flash: +84 bytes
SRAM: 0 bytes
2023-05-06 12:08:06 +00:00
1d87789641
Always allow Live Adjust Z in Settings
2023-05-05 19:19:11 +00:00
bf6c0919e1
Merge pull request #4166 from gudnimg/gudnimg-patch-1
...
M701/M702: Set default Z value to 0
2023-05-05 12:38:37 +02:00
12d9070c03
Merge pull request #4181 from gudnimg/status-screen-feedrate
...
optimisation: only check feedrate if knob is rotated
2023-05-05 12:37:46 +02:00
bdd958fe5e
Merge pull request #4157 from leptun/menu_optimizations
...
Menu optimizations
2023-05-05 11:51:12 +02:00
e3a57c9947
Merge pull request #4169 from 3d-gussner/MK3_TMcal_mid
...
Move nozzle to center during Thermal model cal.
2023-05-05 11:48:41 +02:00
fc15f5a6ef
Select correct MMU slot in lcd_wizard_load
...
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2023-05-02 22:38:54 +00:00
5b75886a55
Fix regression where feedrate can overflow on status screen
...
If the remaining print time is more than 10.9 hours at 100%
then increasing the feedrate multiplier
to 101% or more will yield an unrealistic time due to overflow occuring.
Change in memory:
Flash +2 bytes
SRAM: 0 bytes
2023-05-01 12:48:21 +00:00
b3f52f95c7
optimisation: only check feedrate if knob is rotated
...
Guard the feedmultiply code with
lcd_encoder.
if lcd_encoder = 0, then there is no need to check if
feedmultiply should be updated.
Also set lcd_encoder to zero in one line to consume the rotation event.
Change in memory:
Flash: -40 bytes
SRAM: 0 bytes
2023-04-30 23:31:16 +00:00
26369ac540
Restore old M701/M702 behavior
...
If the new Z parameter is not given,
assume that the old Z-lift behavior is desired.
Change in memory:
Flash: -28 bytes
SRAM: 0 bytes
2023-04-29 16:22:28 +00:00
e11555392e
Save some bytes.
...
Thanks to @leptun
2023-04-26 09:18:47 +02:00
686f92b243
Move nozzle to center during Thermal model cal.
2023-04-25 20:41:17 +02:00
e662ef276e
Deduplicate temperature settings
...
Flash: -52B
SRAM: 0B
2023-04-24 11:56:53 +02:00
c83646743f
Deduplicate MMU settings
...
Flash: -58B
SRAM: 0B
2023-04-24 11:56:53 +02:00
4a2a89cb74
Remove stupid comments from older bad code
2023-04-24 11:56:53 +02:00
67f0fe0fce
Remove AUTOTEMP menu items
...
They are commented out and broken anyway
2023-04-24 11:56:53 +02:00
5b7266fdf1
Don't render message when printer is idle
...
Guard the lcd_display_message_fullscreen_P call by blocks_queued(). If there are no planned moves, there is no need to render this message, it creates a weird LCD draw noticable by the user.
Change in memory:
Flash: +10 bytes
SRAM: 0 bytes
2023-04-23 12:25:10 +02:00
9de2cbfe8e
Fix an issue with crash_mode_switch toggling
...
Proposed changes
2023-04-23 12:25:10 +02:00
9272545deb
Dead code cleanup
2023-04-23 12:25:10 +02:00
02a0f6a35a
Correctly utilize the menu stack in the Mode select message
...
Flash: -34B
SRAM: 0B
2023-04-23 12:25:10 +02:00
6390b3b69b
Remove duplicate separator string
...
Flash: -14B
SRAM: 0B
2023-04-23 12:25:10 +02:00
ee8b95b556
Merge pull request #4158 from gudnimg/remove-dead-code-gudni-e1e2
...
Cleanup: remove unused extruder macros
2023-04-23 09:26:26 +02:00
9662bb11d4
Merge pull request #4144 from gudnimg/double-feedback-bugs
...
Double feedback bugs
2023-04-23 09:14:01 +02:00
3509791943
Drop sound feedback in lcd_v2_calibration
...
Drop the sound feedback in lcd_v2_calibration
when switching to lcd_generic_preheat_menu
If a single filament setup (no MMU) has filament loaded, it will jump
immediately to lcd_generic_preheat_menu
this created double feedback.
Let's just drop the feedback since the transition
between menus is very fast.
Change in memory:
Flash: -8 bytes
2023-04-22 15:28:27 +00:00
fcabcd2804
Remove TEMP_SENSOR_1 and TEMP_SENSOR_2
...
Hopefully I didn't miss anything
2023-04-22 15:15:21 +00:00
4935191335
Cleanup remove unused macros
...
enable_e1
enable_e2
disable_e1
disable_e2
The firmware doesn't support multiple extruders
No change in memory
2023-04-22 15:15:21 +00:00
51da6065c8
Merge pull request #4159 from gudnimg/cleanup-gudni-comments
...
Remove random `//-//` comments
2023-04-22 13:53:13 +00:00
b8f8348e77
Fix double feedback in Z-offset menu
2023-04-22 15:53:06 +02:00
b6e228d5a5
Fix double feedback in First Layer Calibration
...
For MMU users: This happens when the user
selects a filament to load from 1 to 5
For non-MMU: this happens when clicking
the knob within 2 seconds.
Additionally fixed the code indendation
it was a mix of spaces and tabs
2023-04-22 15:53:06 +02:00
ccabf1fa31
Remove random //-// comments
2023-04-22 13:39:08 +00:00
e516d8a0c4
Merge pull request #4156 from leptun/lcd_status_screen_block
...
Fix `M0` click not consumed
2023-04-22 15:01:16 +02:00
360f234b98
Merge pull request #4146 from gudnimg/fan-check-opt
...
Reduce code size in fan check selftest
2023-04-21 14:24:04 +02:00
91b913e997
Fix `M0` click not consumed
...
Fix the need to click the knob twice to dismiss `M0`.
Flash: -54B
SRAM: -2B
2023-04-21 12:59:40 +02:00
2ad916a2c3
Fix manual fan check menu
...
lcd_encoder was not being updated
we need to call manage_inactivity
Tested on MK3S+
Change in memory:
Flash: +6 bytes
SRAM: 0 bytes
2023-04-19 15:41:36 +00:00
18c389543b
Fix lcd_update() FW crashes
...
Change in memory:
Flash: +10 bytes
SRAM: 0 bytes
2023-04-19 15:41:36 +00:00
2dcaae80d5
Merge pull request #4027 from gudnimg/minor-optimisation-gudni
...
Many minor optimisations for 3.13/3.14
2023-04-17 21:27:48 +02:00
f6135f2ed1
Enable Analog IR sensor again
2023-04-16 13:58:18 +00:00
9b6e1babcb
many more lcd_putc_at optimisations
...
Changes in
lcd_implementation_drawmenu_sdfile
and
lcd_implementation_drawmenu_sddirectory
seem to save the most.
Change in memory:
Flash: -72 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
9f66eceb29
optimisation: belt test new values
...
use lcd_print instead of lcd_printf_P
to print the number only
Tested on MK3S+
Change in memory:
Flash: -34 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
87e40f1cee
optimisation: lcd_putc_at in belt test
...
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
583c46a63f
Simplify two fan_check_error checks
...
There are only 3 possible values. No need to check for two of them
to rule of the last value. Instead simply check for the last value only.
Change in memory:
Flash: -16 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
00ffab8f62
optimisation: combine if statements in Sensors menu
...
FINDA status is always 0 or 1
Change in memory:
Flash: -28 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
69b4696114
use lcd_puts_P instead of lcd_printf_P
...
Change in memory:
Flash: -8 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
66bb9bcfe4
optimisation: lcd_temp_cal_show_result
...
result is boolean so always update the EEPROM
Change in memory:
Flash: -20 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
bd796a2cb3
optimisation: more lcd_putc_at
...
Change in memory:
Flash: -18 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
6e02a082e2
cleanup: make heating_status_counter static
...
Change in memory:
Flash: 0 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
ab934f8ba5
optimisation: make clock_interval static and 1 byte
...
Change in memory:
Flash: -16 bytes
SRAM: -1 byte
2023-04-15 13:45:09 +00:00
66e629ba74
cleanup: remove unused variable FSensorStateMenu
2023-04-15 13:45:09 +00:00
3cd97a5e8f
optimsation: draw cursor and set position with one function
...
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2023-04-15 13:45:08 +00:00
3dda8b5c00
optimise fan check selftest code
...
Tested on MK3S+
Change in memory:
Flash: -174 bytes
SRAM: 0 bytes
2023-04-15 11:11:16 +00:00
d6c81dab62
Fix manual fan check menu
...
lcd_encoder was not being updated
we need to call manage_inactivity
Tested on MK3S+
Change in memory:
Flash: +6 bytes
SRAM: 0 bytes
2023-04-15 10:59:58 +00:00
95acdba5fa
Fix lcd_update() FW crashes
...
Change in memory:
Flash: +10 bytes
SRAM: 0 bytes
2023-04-14 21:31:12 +00:00
82343184e7
Merge pull request #4036 from gudnimg/optimise-mmu-silent-mode
...
optimisation: MMU silent mode toggling & init
2023-04-13 10:54:21 +02:00
193bce7f20
Merge pull request #4037 from gudnimg/optimisation-tmc2130-stuff
...
Optimisation: Disable M351 when using TMC2130 and code related to it
2023-04-13 10:54:08 +02:00
3b9d1b8980
Merge pull request #4138 from gudnimg/menu-fixes-gudni
...
Fix broken editing menu
2023-04-13 10:16:19 +02:00
c16e7733e9
Merge pull request #4141 from gudnimg/double-feedback-xyz-cal-menu
...
menu: Fix an issue with feedback double triggering in XYZ cal menu on knob click
2023-04-12 21:29:24 +02:00
225999b79d
Remove redundant colon characters
...
The Edit menu already applies a colon to the label string
no need to render it twice.
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2023-04-12 17:37:57 +00:00
2fc810289a
Fix an issue with feedback double triggering in XYZ cal menu
...
The feedback is produced due to the user clicking the knob
the menu_goto call should therefore not trigger additional feedback when
switching between menus.
No change in memory
2023-04-12 16:46:33 +00:00
d688f6ec6f
Menu item code: optimize return
2023-04-10 15:29:58 +02:00
b735c3d040
optimisation: extract common code into SETTINGS_FANS_CHECK
...
Implement it as a function instead of preprocessor macro
this allows us to control inlining
Change in memory:
Flash: -34 bytes
SRAM: 0 bytes
2023-04-10 13:24:39 +02:00
d3d201730e
Do not return early if the menu item is clicked
...
Just let the menu draw till the end even if an item is clicked. The worst this can do is waste some clock cycles
flash: -1222B
ram: 0B
2023-04-10 13:02:22 +02:00
902780a929
Disable M351 when using TMC2130 and code related to it
...
Change in memory (MK3S+ multilang build)
Flash: -250 bytes
SRAM: 0 bytes
2023-04-07 21:07:26 +02:00
49096f14c3
SD menu do not consume click in _scrolling state
2023-04-07 09:11:49 +02:00
10ba758bf7
Fix menu encoder rotation
2023-04-06 21:35:30 +02:00
dfe6ea6470
Fixup after rebase
2023-04-06 07:44:16 +02:00
062ea1cf25
optimisation: make lcd_encoder two bytes (int16_t)
...
lcd_encoder was int32_t (4 bytes) because of the menu code
when editing through the menus, the menus only accept
int16_t so it doesnt make sense to use int32_t.
Change in memory:
Flash: -892 bytes
SRAM: -2 bytes
2023-04-06 07:44:16 +02:00
c754c8dd5f
Remove menu code in favor of simplicity
...
This change needs to be approved of course due to it affecting UI
The affect UI is only one menu
lcd_settings_linearity_correction_menu
I doubt many users are using this menu except very advanced users.
I propose we delete the variant of menu_draw_P which was used for
uint8_t but renders them as floats.
Instead treat
uint8_t same as int16_t i.e. just render integers.
Keeping it simple :) Solve our fanSpeed problem.
Change in memory:
Flash: -140 bytes
SRAM: -2 bytes
2023-04-06 06:05:59 +02:00
2ced00f21c
Convert fanSpeed and saved_fan_speed to uint8_t
...
These variables only range from 0 to 255
For the menus we currently need to convert fanSpeed to int16_t.
Change in memory:
Flash: -160 bytes
SRAM: -2 bytes
2023-04-06 06:05:59 +02:00
5b04812017
Eliminate subtraction in print time statistic
...
Change in memory:
Flash: -20 bytes
SRAM: 0 bytes
2023-04-05 11:16:54 +02:00
ee39cb4e90
remove one global variable
2023-04-05 11:16:54 +02:00
768319f1e7
optimisation: cleanup print statistics
...
Change in memory:
Flash: -104 bytes
SRAM: 0 bytes
2023-04-05 11:16:54 +02:00
b9717b03e7
Make bFilament variables static and move to top of file
2023-04-05 11:16:14 +02:00
68d902c4e1
Take FilamentAction as parameter
...
Change in memory:
Flash: -28 bytes
SRAM: 0 bytes
2023-04-05 11:16:14 +02:00
210bbe9764
Remove dead code
2023-04-05 11:16:14 +02:00
301b2e4384
Optimisation: Move filAutoLoad to ultralcd
...
We can reuse preheat_or_continue() function
Change in memory:
Flash: -22 bytes
SRAM: 0 bytes
2023-04-05 11:16:14 +02:00
a7e9ccfb57
Major refactoring
...
Fixes all the issues I've found so far.
Roughly 60B of flash saved. Need to double check that later.
2023-04-05 10:30:59 +02:00
d89e6de040
Update lcd_encoder in lcd_update
...
This fixes the spurious feedback when rotating the knob
because lcd_update is called much often than the interval
at which the lcd rendering is updated
Change in memory
Flash: -88 bytes
SRAM: -9 bytes
2023-04-05 10:30:59 +02:00
67c206ea5c
Remove menu_back_if_clicked_fb
...
Since feedback is always produced on knob click
we can use menu_back_if_clicked instead
Change in memory:
Flash: -18 bytes
SRAM: 0 bytes
2023-04-05 10:30:59 +02:00
0cac7612db
optimisation: Always make sound when knob is clicked or rotated
...
This commit adds the ability for firmware to make sounds when the
knob is clicked or rotated, when LCD updates are disabled.
The improvement here is the sound is being made with one line of code
whether or not LCD updates are enabled or disabled.
Change in memory:
Flash: -24 bytes
SRAM: 0 bytes
2023-04-05 10:30:59 +02:00
b9ce7637df
Rename enquecommandf() into enquecommandf_P()
2023-04-05 09:10:39 +02:00
7e119f733f
Implement variant of enquecommand which accepts format string
...
This eliminates many local buffers
Change in memory:
Flash: -450 bytes
SRAM: 0 bytes
2023-04-05 09:10:39 +02:00
687c14808a
optimisation: MMU silent mode toggling & init
...
Change in memory:
Flash: -16 bytes
SRAM: -2 bytes
2023-04-04 17:07:55 +00:00
4cf46893fc
Revert "Fix a few ambiguous overloaded calls"
...
This reverts commit b7c42e83cf
2023-04-04 16:12:41 +02:00
b9fecab239
Reduce calls to __divsf3 when calculating feedrate
...
For non-time critical code it is more effcient to call a function
rather inlining each division operation.
Change in memory:
Flash: -122 bytes
SRAM: 0 bytes
2023-04-04 15:16:56 +02:00
b7c42e83cf
Fix a few ambiguous overloaded calls
...
Noticed this when exploring another optimisation
By specification exactly which overloaded function to use
we save some memory
Seems to have something to do with doing arithmetic in the function argument
Change in memory:
Flash: -156 bytes
SRAM: 0 bytes
2023-04-04 15:03:48 +02:00
3e4592b7fd
Don't duplicate silent mode menu
...
Create a common function for the menu
This saves a lot of memory and 50 lines of code!
Change in memory:
Flash: -110 bytes
SRAM: 0 bytes
2023-04-04 14:47:45 +02:00
5be4504fea
Re-use G28 W string in PROGMEM
...
Change in memory:
Flash: -12 bytes
SRAM: 0 bytes
2023-03-27 18:14:28 +00:00
34ec1ff190
Merge pull request #4098 from gudnimg/PFW-1515
...
PFW-1515 Fix an issue with Thermal Anomaly message
2023-03-24 14:04:21 +01:00
6959b372ec
Merge pull request #4063 from gudnimg/PFW-1503
...
PFW-1503 Improve live Z babystep menu handling
2023-03-24 14:01:15 +01:00
b9103a113c
Merge pull request #4102 from 3d-gussner/MK3_fix_Hbed_MMULoadingTest
...
Fix HBed on Load for MMU Loading test
2023-03-24 13:59:58 +01:00
4feacfe822
Merge pull request #4093 from gudnimg/Restore-default-M701-M702-Z-lift
...
Restore previous Z-lift in M701/M702 + other PROGMEM optimisations
2023-03-24 13:59:47 +01:00
5536873eca
Fix HBed on Load for MMU Loading test
2023-03-22 09:50:59 +01:00
c5fc1168ed
PFW-1515 Fix an issue with Thermal Anomaly message
...
Issue introduced with PFW-1504
Change in memory:
Flash: +40 bytes
SRAM: 0 bytes
2023-03-20 20:35:49 +00:00
5ade1716bf
Add M500 into PROGMEM
...
Change in memory:
Flash: -6 bytes
SRAM: 0 bytes
2023-03-18 17:01:59 +00:00
466a6a8fc3
Add M600 into PROGMEM
...
Change in memory:
Flash: -10 bytes
SRAM: 0 bytes
2023-03-18 16:33:13 +00:00
129cc18cbf
Add M23 %s into PROGMEM
...
Change in memory:
Flash: -14 bytes
SRAM: 0 bytes
2023-03-18 16:18:05 +00:00
7c0ead7bc2
Add M24 into PROGMEM
...
Change in memory:
Flash: -8 bytes
SRAM: 0 bytes
2023-03-18 16:15:10 +00:00
5f8fc64a32
Restore previous Z-lift in M701/M702
...
Previously when the firmware called M701/M702 manually
there was no Z lift. But after we added support for the Z
parameter we set the default to 50mm.
Change strings "M701" to "M701 Z0" and "M702" to "M702 Z0"
to restore the previous behavior from before 3.13.
Also pulled the gcodes into PROGMEM in message.cpp
along with M83 and M84 to save memory.
Change in memory:
Flash: -34 bytes
SRAM: 0 bytes
2023-03-18 15:34:47 +00:00
e40d8ebbcc
Implement printJobOngoing()
...
This makes the if statments a little bit more readable
Change in memory:
Flash: -88 bytes
SRAM: 0 bytes
2023-03-18 12:18:43 +00:00
561d8599d2
PFW-1503 drop {} for consistency
2023-03-18 11:56:06 +00:00
09d918ce5d
PFW-1503 Change BABYSTEP_ALLOWED to babystep_allowed
...
I initially started with a preprocessor macro
called BABYSTEP_ALLOWED, but now it is a function.
It more common to use lower case for function names
2023-03-18 11:56:06 +00:00
bc2366cd8d
PFW-1503 Improve live Z babystep menu handling
...
Fixes an issue with running first layer calibration twice in a row.
Improvements:
Now the Z baby step menu closes automatically when first layer calibration is done.
No need to wait for a timeout or close the menu manually by setting a variable
If the baby stepping menu is open, and suddenly
the printer enters a state where baby stepping
is not allowed.
The printer will save the last value before closing the menu.
When LcdCommands != Idle, don't dismiss
the Z baby step menu. This saves 20B
Change in memory:
Flash: -130 bytes
SRAM: 0 bytes
2023-03-18 11:56:05 +00:00
5c010a3aaa
PFW-1509 Fix an issue with unload when nozzle is cold
...
Change in memory:
Flash: -2 bytes
SRAM: 0 bytes
2023-03-18 10:43:23 +00:00
e951a106d6
Messages fit to pages
2023-03-14 08:56:46 +01:00
22e70faa71
Remove `MMU2` and `MMU unit` messages
...
Saves 26byte of flash
Saves -368 byte in trasnlations
2023-03-14 08:30:15 +01:00
7676df88a4
Rename forgotten `MMU2` message to `MMU`
2023-03-14 08:30:03 +01:00
9721a87ef2
Raname `MMU2` message to `MMU` as everywhere
2023-03-14 08:24:50 +01:00
93598ef00d
Change some messages to be max three rows instead of two
...
Yes|No are now located at the 4th row and so messages can
use three rows. This should allow improvement in some translations.
2023-03-14 08:23:40 +01:00
bbfc4b9f78
PFW-1504 initial commit
...
Change in memory:
Flash: +162 bytes
SRAM: 0 bytes
2023-03-13 06:47:08 +01:00
04d440a9c8
Fix AutoLoad filament menu not shown when FSensor is [Off] ( #4072 )
...
Fix AutoLoad filament menu not shown when FSensor if [Off]
2023-03-10 14:23:56 +01:00
474d489c39
Merge pull request #4033 from gudnimg/improve-preheat-target
...
preheat: improve target temperature threshold
2023-03-03 14:41:58 +01:00
7214584723
Fixed conflict with force_z, added P flags
2023-02-25 15:24:59 -05:00
487c7d63e1
Partial
2023-02-25 15:02:26 -05:00
6dfbdd3735
Enable M914/5, Show in settings if overloaded
2023-02-25 14:49:40 -05:00
31bfbb4ed0
Merge pull request #4023 from DRracer/rename-eject-mmu
...
PFW-1497 Change Eject filament -> Eject from MMU
2023-02-23 10:48:35 +01:00
afc866e756
Merge pull request #4010 from gudnimg/improve-backlight-control
...
backlight: always allow backlight to dim/wake
2023-02-21 10:00:03 +01:00
36c6b323c4
Set `Is filament loaded? Yes|No` default to `No` without a timeout.
2023-02-20 16:31:23 +01:00
496b52b819
preheat: sync temperature threshold in M600 and Wizard
...
* M600 used 1°C threshold, which may increase the waiting time a bit
* Wizard used 3°C
Sync both to use TEMP_HYSTERESIS for consistancy
No change in memory footprint
2023-02-19 13:23:31 +00:00
6ad126ef0b
optimisation: preheat menu always uses integers for target temperature
...
Let's drop the float comparison since it not needed
Change in memory:
Flash : -16 bytes
SRAM: 0 bytes
2023-02-19 13:21:30 +00:00
319fec47f0
preheat: improve target temperature threshold
...
Use 5°C threshold to be consistant with other parts
of the firmware.
Relying on 95% of the target temperature creates
a dependency on the temperature:
PLA: Target = 215°C, threshold = 10.75°C
PETG: Target = 230°C, threshold = 11.5°C
ABS: Target = 255°C, threshold = 12.75°C
ASA: Target =260°C, threshold = 13.0°C
PC: Target = 275°C, threshold = 13.75°C
My proposal is we instead use a constant
TEMP_HYSTERESIS = 5, which is consistent with
M109, and behavior when restoring print from RAM
and some of the MMU code (like unload function)
Change in memory:
Flash: +2 bytes
SRAM: 0 bytes
2023-02-19 12:59:58 +00:00
db878c9996
backlight: always allow backlight to dim/wake
...
This commit adds the ability for the firmware to dim and wake the
backlight when LCD updates are disabled. Such as in the MMU error screen
or when rendering full screen messages which typically
disable the LCD updates to prevent the status screen from rendering.
Fixes #2777
Change in memory:
Flash: -26 bytes
SRAM: +1 byte
2023-02-18 17:08:35 +00:00
5cd60636f9
Add missing translations + shorten to 16 chars
2023-02-18 17:39:30 +01:00
98e7c15928
Change Eject filament -> Eject from MMU
...
PFW-1497
2023-02-18 17:39:30 +01:00
05662a5c0a
optimsation: reduce code size in LCD rendering
...
Change in memory (MK3S+ Multilang):
Flash: -62 bytes
SRAM: -6 bytes
2023-02-18 16:32:08 +01:00
620b19bbab
Roll up lay1cal_square loops
2023-02-17 14:30:20 +01:00
8129a14f19
Move layer calibration finish commands into first_layer_cal.cpp
2023-02-17 14:30:20 +01:00
568eec5ee0
Implement first layer cal with calculated extrusion widths
2023-02-17 14:30:20 +01:00
b63f5433df
Don't show Pause/Stop menus while processing T-codes
...
PFW-1449
Change in memory:
Flash: +18 bytes
SRAM: +1 bytes
2023-02-12 15:58:07 +01:00
504099bd6c
optimisation: reduce code size in rendering cursor
...
Change in memory:
Flash: -62 bytes
SRAM: 0 bytes
2023-02-11 19:06:14 +01:00
b02e8d9961
Fix First layer cal being stored without confirming with knob
2023-02-10 14:34:16 +01:00
ea7e717204
Cleanup: Remove various dead code
2023-02-10 08:17:36 +01:00
ca978080c4
Change to Thermal model
...
Add prusa.io/tm-cal link
and update all TM related translations
2023-02-08 15:36:59 +01:00
99761bdff7
optimisation: re-use adjust_bed_reset()
...
Move the code into eeprom.cpp since we're only working with EEPROM
Change in memory:
Flash: -42 bytes
SRAM: 0 bytes
2023-02-08 08:01:55 +01:00
b28aa6f42a
PFW-1471 Rename 'Toolchange count' to 'Material changes'
...
Added the string to our message so it can be translated
Change in memory:
Flash: -10 bytes
SRAM: 0 bytes
2023-02-06 08:33:40 +01:00
d66e2b66c2
Cleanup: use setTargetHotend consistently for one extruder
...
Main changes:
* setAllTargetHotends() is removed
* setTargetHotendSafe() is removed
* Extruder parameter on setTargetHotend() is dropped
Change in memory:
Flash: -192 bytes
SRAM: 0 bytes
2023-02-01 08:28:23 +01:00
da63d73585
optimisation: don't print floats with lcd_print()
...
Change in memory:
Flash: -442 bytes
SRAM: 0 bytes
2023-01-25 18:21:22 +00:00
17e6f1b75e
optimisation: remove conv2str.cpp
...
Change in memory:
Flash: -288 bytes
SRAM: -8 bytes
2023-01-25 06:28:00 +00:00
fab4165f4a
Merge pull request #3920 from wavexx/selftest_ok_alert
...
wizard: Do no set "Self test OK" as an alert message
2023-01-24 14:16:44 +01:00
c9f3a4cfce
wizard: Disable TM warnings during calibration
...
During calibration model warnings are possible/normal. This is
apparently leading some into thinking the hotend might be faulty
and abort the calibration with a hard reset.
Disable warnings/beeps during calibration.
Rely on the error threshold only.
2023-01-23 16:52:27 +01:00
0c352ac2d1
Disable M47 if TMC2130 drivers are used
...
flash: -126B
RAM: 0B
2023-01-17 20:37:27 +01:00
16a89b9215
wizard: Return to status after calibration
2023-01-16 11:38:56 +01:00
7529652dca
TM: Restore extruder autofan state when stopping/resuming
...
During thermal errors all fans are set to full speed.
When the print is resumed or stopped *and* the thermal error is gone,
also restore the autofan state.
Fixes #3893
2023-01-16 08:43:36 +01:00
3d-gussner
Guðni Már Gilbert
VintagePC
Alex Voinea
D.R.racer
Giles Bathgate
Yuri D'Elia