7130504fcf
Apply the reprint_pr_changes_diff2.txt provided by @3d-gussner
2023-11-22 12:18:59 +01:00
f48c9e0d4f
Fix execution of update-po.py
2023-11-22 12:18:45 +01:00
242fdc863b
Execution of lang/update-pot.py and lang/update-po.py
2023-11-22 12:16:38 +01:00
ce135a0976
Added support for reprint and streamed GCODE
2023-11-22 12:14:08 +01:00
532a5b3e2f
- Serial message --> /// action:reprint done
...
- Yes/no question --> Need to fix the bug related with the filename print --> if (lcd_show_fullscreen_message_yes_no_and_wait_P(altfilename, false, LCD_LEFT_BUTTON_CHOICE)==LCD_LEFT_BUTTON_CHOICE)
2023-11-22 12:14:00 +01:00
004169034a
Remove some MYSERIAL calls
2023-11-22 12:13:24 +01:00
ae5fbce6e7
Remove MYSERIAL.println code (debug purpose) and old commented code
2023-11-22 12:13:16 +01:00
a52d5430aa
Change to enquecommandf_P and enquecommand_P
2023-11-22 12:13:01 +01:00
7a6cfda34f
Fix SV translation length of MSG_REPRINT
2023-11-22 12:12:50 +01:00
cb92fd5002
Fix the length of the PL translation of MSG_REPRINT
2023-11-22 12:12:21 +01:00
e8a2d4c7e1
Reprint function integrated on 3.13v
2023-11-22 12:11:39 +01:00
8615a8dad5
Merge pull request #4429 from 3d-gussner/MK3_PFW-1525_Printer_Ready
...
PFW-1525 Add `Set Ready`menu
2023-11-22 08:52:39 +01:00
02459edcb6
Rebase fix
...
Add documentation
Whitespace
2023-11-22 08:21:52 +01:00
d394645b69
Whitespace
2023-11-22 07:59:18 +01:00
af79ac0714
Add `SetPrinterState(PrinterState::Idle);` after `lcd_commands_type = LcdCommands::Idle;`
2023-11-22 07:58:17 +01:00
d5d77ee243
Cleanup documentation
2023-11-22 07:58:17 +01:00
880d2f28bd
LCD menu only sends `// action:ready` or `// action:not_ready` via serial
...
Host has to send back state with `M72 S1|0` to keep printer and host in sync
Changed LCD menu messages to `Set ready` and `Set not ready`
Updated translations
2023-11-22 07:58:17 +01:00
516ae1b952
Update state
2023-11-22 07:58:17 +01:00
dfcaa330fa
Fix cmake build
2023-11-22 07:58:17 +01:00
d3b98f30a7
Show Set Ready LCD menu only when M79 timer is running.
2023-11-22 07:58:17 +01:00
514607318e
Add printer_state.cpp/.h
2023-11-22 07:58:17 +01:00
d276695ce7
Set Ready
2023-11-22 07:58:13 +01:00
bbae8dd956
Merge pull request #4493 from gudnimg/print-job-timer-marlin
...
PFW-1206: Implement Marlin's print job timer and add M75-M78
2023-11-22 07:44:09 +01:00
134e892d8e
Fix build failure
...
Another isPrintPaused was added by rebase
2023-11-21 18:40:28 +00:00
60cb089e96
Show statistics menu for USB/Serial prints
...
Change in memory:
Flash: -8 bytes
SRAM: 0 bytes
2023-11-21 18:38:40 +00:00
331ceaf044
M77: Save statistics when timer is stopped
...
For remote hosts, when the timer is stopped, then also save the statistics.
Slightly refactored save_statistics function by removing the parameters.
The function parameters are always the same.
Change in memory:
Flash: -40 bytes
SRAM: 0 bytes
2023-11-21 18:38:40 +00:00
a2e6cda37e
Fix build failure
2023-11-21 18:38:40 +00:00
a6de11059f
PFW-1206 Add M75-M78
...
Change in memory:
Flash: +240 bytes
SRAM: 0 bytes
2023-11-21 18:38:40 +00:00
423f98ff6e
Implement Marlin's print job timer
...
I changed the code a bit so it would compile
in Prusa Firmware.
The paused duration is no longer included in the
print time statistics.
Change in memory:
Flash: -122 bytes
SRAM: 0 bytes
2023-11-21 18:38:40 +00:00
c5a885dba3
Merge pull request #4507 from 3d-gussner/MK3_Fix_File_incomplete
...
Raise `END_FILE_SECTION`
2023-11-20 11:34:48 +01:00
8b3373b9dc
Raise `END_FILE_SECTION` from 20000 to 30720 to prevent false positive `File incomplete. Continue Anyway?` messages.
2023-11-20 11:23:36 +01:00
d3b4bfb685
Merge pull request #4399 from 3d-gussner/MK3_M125
...
Add M125
2023-11-20 09:46:01 +01:00
96094dc548
Don't pause with `S`et values
...
Update documentation
2023-11-20 07:30:07 +01:00
0d60a82c56
Don't reset pause_position on every M125
...
Change in memory:
Flash: -76 bytes
SRAM: 0 bytes
2023-11-20 07:30:06 +01:00
4a4c015ad8
M125: make pause_position static
2023-11-20 07:30:06 +01:00
2e12133716
M125: Code size optimisation
...
Change in memory:
Flash: -66 bytes
SRAM: -12 bytes
2023-11-20 07:30:06 +01:00
498d99b84b
Code size improvments
2023-11-20 07:30:06 +01:00
4dc87acf20
Fix issues
...
Check printer limits
Fix crash when pausing / paused
2023-11-20 07:30:06 +01:00
43692b416b
Fix float
...
Thanks to @gudnimg for pointing out
2023-11-20 07:30:06 +01:00
af054923a7
Add M125
2023-11-20 07:30:06 +01:00
9fd478c9c2
Merge pull request #4173 from gudnimg/disable-heaters-gudni
...
optimisation: use `disable_heater()` in more places
2023-11-20 07:01:05 +01:00
b39b83ecbf
Merge pull request #4457 from 3d-gussner/MK3_PrinterName
...
PFW-1184:Basic Printer name in EEPROM
2023-11-20 06:59:38 +01:00
53c419f52d
Basic Printer name in EEPROM
...
- Output with M115 works
- ToDo
- LCD screen
- M550 gcode
- Detect length of EEPROM CUSTOM_MENDLE_NAME
2023-11-18 10:14:07 +01:00
7e0df7f9d3
Merge pull request #4502 from gudnimg/gcode_reset_stepper_timeout
...
MMU: Remove gcode_reset_stepper_timeout
2023-11-17 09:27:49 +00:00
f42d7e4ea0
Merge pull request #4495 from gudnimg/eeprom-table-cleanup
...
EEPROM: Formatting cleanup
2023-11-16 17:04:08 +01:00
e758b146be
MMU: Remove gcode_reset_stepper_timeout
...
This function was removed on the 32-bit side.
On the 8-bit the function was empty so it is safe
remove it.
2023-11-16 14:30:29 +00:00
4922bcd7b1
Merge pull request #4408 from gudnimg/PR2390
...
PFW-1097 M600: Fix filament change behavior when print is paused
2023-11-16 07:37:42 +00:00
400722ec67
Merge pull request #4461 from gudnimg/lcd-opt-message
...
optimisation: simplify two LCD messages
2023-11-16 07:37:09 +00:00
38104063d4
M702: fix documentation link
2023-11-15 09:14:44 +01:00
e74abb102a
Merge pull request #4494 from gudnimg/issue3122
...
Fix #3122
2023-11-12 17:42:10 +01:00
Juan Francisco Estrada
3d-gussner
Guðni Már Gilbert
D.R.racer