0067dc0d9d
Merge branch 'MK3' into MK3_EEPROM_doc
2020-03-23 14:15:35 +01:00
f4037b9cb4
Fixes after testing
2020-03-23 14:13:24 +01:00
5c4b3eea87
Struct comments
2020-03-23 14:57:03 +02:00
73349033d5
Merge pull request #2469 from wavexx/fix_current_pos_init
...
Initialize current_position correctly during startup
2020-03-23 12:26:32 +01:00
fc793b59d7
changed default values for bowden length after test
2020-03-23 12:02:57 +01:00
5a6148670a
Merge pull request #2494 from DRracer/create-mod-filetime-sort
...
Use combined creation/modification file time stamps for sorting
2020-03-23 11:53:52 +01:00
32bff79fd6
minor changes + added EEPROM_FREE_NRx ...
...
Some EEPROM allocations do not use the hole allocated space:
- EEPROM_FARM_NUMBER is only numeric 000-999 and only uses 2 bytes to store the Farm number BUT allocated 3 bytes. Added EEPROM_FREE_NR1 as free space that can be used
- EEPROM_CRASH_DET just changes 1 byte to save it status [on/off] but allocated 5 bytes. Added EEPROM_FREE_NR2 to EEPROM_FREE_NR5 as free space that can be used
2020-03-23 11:40:07 +01:00
ea1a2bb362
Documentation update
2020-03-23 12:37:56 +02:00
468b0e210c
Merge pull request #2372 from leptun/MK3_fix_verbosity
...
Fix SUPPORT_VERBOSITY
2020-03-23 10:53:39 +01:00
0f32c46307
Merge pull request #2371 from 3d-gussner/MK3_Fix_Language_Debug
...
MK3 fix language debug
2020-03-23 10:53:14 +01:00
0c65505741
Added PRUSA3DFW at 0x0000
2020-03-23 07:23:36 +01:00
1b0c86cb51
minor fix
2020-03-22 15:23:41 +01:00
2778fa9aa0
Added author and version of document
2020-03-22 15:22:14 +01:00
b178252eb9
Added Italic and Bold to highlight some settings
2020-03-22 15:18:45 +01:00
028a27021b
All done...
...
hope not I forgot one. I will re-test all `D3 Axyyyy Cz` before creating a PR.
2020-03-22 14:08:21 +01:00
2591f8d593
Added and tested more...
...
... have to take a short break
2020-03-20 12:36:26 +01:00
c8fc5b2fed
Simpler tabel syntax
2020-03-20 10:44:12 +01:00
684b47e417
Update reference URL
...
There was an official website of Toshiba called "FlashAir Developers '', and
there was information necessary for FlashAir development, but since it closed in September 2019.
Instead, I will point an archive site for developers.
2020-03-15 19:04:02 +09:00
4d40ed67f6
remove LF
2020-03-12 12:36:48 +01:00
2818316366
Started EEPROM Table doxygen documentation
2020-03-12 12:34:33 +01:00
ff479afd88
version for testing / final review
2020-03-10 15:51:48 +01:00
f71bbfe95e
tresholds specification, steady delay
2020-03-10 00:11:17 +01:00
e914f8e0da
Show "Sorting folders" when folders are being sorted
2020-03-05 13:06:37 +02:00
890c137298
Initialize all axis as absolute at the beginning.
2020-03-05 11:29:16 +02:00
5fcf18718f
Decouple XYZ relative from E relative.
2020-03-05 11:22:35 +02:00
355b003b7f
menu_data_reset()
2020-03-04 22:20:53 +02:00
40ebd455f2
Safer menu interrupt call
2020-03-04 22:14:53 +02:00
22432b1053
Reset menu state after lcd_sd_refresh
2020-03-04 21:07:51 +02:00
5edc1ef297
Fix updir and dir again
2020-03-04 21:03:57 +02:00
57c149e7b5
Comment cleanup
2020-03-04 21:01:08 +02:00
7b19715c99
Cache sdSort
2020-03-04 20:41:17 +02:00
f35e553373
Code cleanup
2020-03-04 20:33:43 +02:00
f09323a78f
heaters-checking update
2020-03-03 14:57:45 +01:00
8e47cb35a3
Possible fix to longpress in sdcard menu
2020-03-03 15:29:10 +02:00
d1968f6ff0
Option to refresh/resort SDcard files when flashAir type is selected
2020-03-03 15:17:50 +02:00
f69a68b966
Fix subdir enter and exit
2020-03-03 14:55:08 +02:00
53e130fc6d
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION
2020-03-03 14:14:43 +02:00
0eaa4edfee
configuration update
2020-03-02 21:18:11 +01:00
2a9504b20a
!!! for testing only !!!
...
filament sensor auto-detection
2020-03-02 19:07:23 +01:00
ec5e54de25
state fixing
2020-03-02 17:52:25 +01:00
e06beb61c3
Ditch charswitch, show ... for measuring
2020-02-21 18:14:13 -05:00
2e18a48b87
Version changed (3.9.0-RC1 build 3272)
2020-02-17 16:47:56 +01:00
f234ef2104
Use combined creation/modification file time stamps for sorting
2020-02-14 09:09:15 +01:00
1aaefffdb0
Change to raise_z_above()
2020-02-13 07:37:27 -05:00
5abee3d3e5
Better display handling
2020-02-11 19:44:26 -05:00
278bb032d7
Change to raise_z_above()
2020-02-11 18:37:26 -05:00
a4458fb57b
Removed duplicate #defines
...
cleaned up display routine
2020-02-11 18:33:40 -05:00
e4b1a1e9c4
Remove delay for belttest, similar to #2439
...
There's a separate PR to remove the first delay in the selftest. (#2439 ). Mirroring that to the belt test function, which I suspect also inherited it.
2020-02-09 21:39:48 -05:00
721b27fcb6
Reorg/cleanup
...
Removed unused progress variable
reorganized flow to avoid early returns (ensures forced high power mode is disabled regardless of outcome)
2020-02-08 12:33:23 -05:00
1384e783bf
Force high power mode when running belt test
2020-02-07 16:14:33 -05:00
a10b7f3963
Merge pull request #2470 from leptun/MK3_Adjusted_mintemp
...
Adjusted hotend, bed and Ambient mintemp values
2020-02-07 08:54:50 +01:00
f1618bfbd6
Initialize current_position correctly during startup
...
Just after setting up the w2m matrix, call "clamp_to_software_endstops"
on the current_position (initially [0,0,0]) to move it to the effective
minimal position, which is usually [0,0,non-zero] due to MIN_Z and the
negative probe offset.
This is required to calculate correctly the first relative move:
planning X+10 would unexpectedly calculate a Z shift otherwise.
2020-02-06 22:41:47 +01:00
9e45b5d41e
Improve PAT9125 filament / optical quality checks
...
Tune the "soft" filament recheck to be more in-line with the latest
changes. Relax the thresholds so that a poorly tracking filament
that managed to trigger a recheck can still pass as long as /some/
motion is detected.
Hide the unused fsensor_oq_result() behind the FSENSOR_QUALITY define,
which is likely broken currently anyway.
Cleanup and simplify all the OQ defines.
2020-02-06 18:27:44 +01:00
853bb79b6b
Return correct status from pat9125_update_bs
2020-02-06 16:39:08 +01:00
bd0544fe9e
FS: Use two different speeds when checking for runout
...
When doing a PAT9125 "soft check", use two different speeds between
retraction and extrusion. This increases the chances that we can
track the surface.
2020-02-06 15:27:22 +01:00
3be859ece9
FS: Improve reliability on speeds with poor optical tracking
...
Depending on the filament surface and moving speed, the PAT9125 sensor
can stop being able to track movement.
In such cases, instead of triggering false errors and/or relying on
previous states, read and use the exposure data off the sensor and
increase error counts only for poorly exposed images instead, which
is a good indicator of a far-away (or missing!) tracking surface.
2020-02-06 15:27:22 +01:00
cdc17e8da1
Read all 12 bits correctly from PAT9125 DELTA_* registers
...
Widen ucXL/ucYL/ucXYH types to 16 bits, since the following shifts
will otherwise truncate the results.
2020-02-06 14:39:04 +01:00
3af35844e1
Remove redundant check (always trigger the fsensor isr)
...
Since fsensor_st_block_chunk is already called on fsensor_chunk_size
boundaries, there's no need to check a second time.
2020-02-06 14:39:04 +01:00
1eddc40ed4
Comment existing code
2020-02-06 14:39:04 +01:00
e84f82a675
Rewrite filament sensor PAT9125 error handling
...
Rewrite the logic behind the "chunking"/error count behind the PAT9125.
Basic idea: check the _direction_ of movement returned by the optical
sensor and compare it to the direction of the stepper. To avoid doing
this continuosly (and because the optical sensor doesn't necessarily
have the accuracy to track small distances), do so in chunks.
Each time a chunk doesn't match the expected direction, increase the
error count.
Several improvements were done to the previous code:
- Increase the chunk window: this ensures that a filament with
poor response returns an usable direction, while also moving the
average return values from the sensor in the middle of the 12 bits
available for maximum effectiveness.
- Since the returned values are more reliable, reduce the error count
(1.25mm*4 = ~5mm before runout detection)
- Track _both_ positive and negative movement, although only trigger
errors during extrusion (necessary due to several assumptions made
in the mmu/unloading code)
- Do not reset the counters for each block: accumulate distances
correctly, allowing detection of any block lenght.
2020-02-06 14:37:46 +01:00
34f43d7389
Update mmu.cpp
...
Fix runout if filament is unknown
2020-02-05 21:41:31 -05:00
5c4235b886
Correctly reset the PAT9125 filament counters
...
When the error count is cleared, the cumulative deltas as well as the
segment lenght which is kept inside the stepper isr need to be reset.
Introduce a helper function fsensor_reset_err_cnt to clear all the
required variables in one place which can be used in most cases
(the only exceptions being quality measument).
Introduce a new function st_reset_fsensor to also clear the segment
lenght within the isr.
2020-02-05 16:21:27 +01:00
6fbd632c84
Isolate all PAT9125-specific code, fix build on !MK3 variants
...
- Hide all prototypes related to PAT9125 to force all callers
to check for the proper sensor, since the handling differences
are substantial
- Remove unneeded lenght accounting from the stepper isr as as
consequence.
- Keep detailed soft failure counts for the MK3 on the "last print
failures" status screen, but fix build on variants without a PAT9125
by fixing the lcd stats function.
2020-02-05 16:20:12 +01:00
d47363d85a
Update the filament axis resolution when E resolution is changed
...
The filament sensor "chunk lenght" needs to be updated every time the
E axis resolution is changed in order to trigger at the same distance.
Introduce a new function fsensor_set_axis_steps_per_unit() and use
it consistent during init, in M92 and M350.
2020-02-05 16:20:12 +01:00
ce74b746f1
FS: Trigger a runout with repeated soft-failures (clog?)
2020-02-05 16:20:12 +01:00
8fb8ff4bf4
Include fsensor recovery stats in the last print stats
2020-02-05 16:20:12 +01:00
e8ce5e140e
FS: Detect runout earlier
2020-02-05 16:20:12 +01:00
4774b44e21
Merge pull request #2461 from leptun/MK3_FIX_MINTEMP_FIXED
...
HEATER -> HOTEND
2020-02-04 16:35:07 +01:00
f1ccfd481a
HEATER -> HOTEND
2020-02-04 17:30:44 +02:00
d4d1f051ba
Merge pull request #2149 from leptun/MK3_TONE
...
PFW-1056: Re-enable Tone on timer4
2020-02-04 11:04:15 +01:00
3ae5fa70ca
Fix comments
2020-02-03 19:20:43 +02:00
1f482adf55
Improved lcd_menu_statistics() implementation
2020-02-03 18:40:46 +02:00
007395acb4
Merge pull request #2458 from wavexx/la15_compat
...
Adjust E-jerk in LA10 compatibility mode
2020-02-03 15:57:21 +01:00
453f5dd874
Adjust E-jerk in LA10 compatibility mode
...
When upgrading K values of a LA1.0 print, also adjust E-jerk settings
(<2) if permissible according to current accell limits. The same is also
true when jerk is set mid-print via 'M205 E'.
Existing values are always restored when switching to another
compatibility mode.
TODO: Since this is stateful, we will need to save the current print
mode / acceleration and jerk in the eeprom for this to survive a power
panic (see prusa3d#2456).
2020-02-03 15:42:27 +01:00
4b85664b27
Raise default extruder jerk to 4.5
...
This should be the new default for LA1.5 for direct drive printers and
newer PrusaSlicer profiles too (hopefully).
2020-02-03 15:42:27 +01:00
796dcd6a3d
Merge pull request #2457 from wavexx/la15_fixes
...
Linear Advance 1.5 fixes
2020-02-03 15:27:02 +01:00
685c8156b6
Merge pull request #2451 from wavexx/fix_printstats_reset
...
Do not clear last print fail stats prematurely
2020-02-03 11:21:41 +01:00
47db75d5fd
Fix overflow and infloop with LA15 and low step rates
...
When calculating the advance tick interval, be sure to check for integer
overflow. Very low step rates can result in values exceeding uint16_t
causing premature LA tick delivery.
An overflow resulting in zero would also block in an infinite loop
within advance_spread().
Even though such rates are worthless in terms of compensation and often
result in 0 extra ticks as well, do not disable LA for the block (as
doing so would reset the count for short segments) and do not check for
zero in multiple paces either.
Saturate the interval instead, delaying any further tick to the next
block.
2020-02-02 22:49:39 +01:00
3bbc143821
Fix build with LA_LIVE_K
...
Do not check for LA_LIVE_K in messages.c (Configuration_adv.h is not
included here).
Rely on the linker to drop the symbol when LA_LIVE_K is disabled.
2020-02-02 18:02:37 +01:00
d6522a643c
Update ultralcd.cpp
...
indent
2020-01-31 16:57:18 +01:00
fd42361236
Update ultralcd.cpp
...
do delay(2000) everytime, even if IR_SENSOR_ANALOG
2020-01-31 16:55:40 +01:00
10d468cceb
Merge branch 'MK3' into remove-unnecessary-delay
2020-01-31 16:51:27 +01:00
d30960b8e8
Merge pull request #2431 from MRprusa3d/PFW-x001
...
selfTest workflow optimalization
2020-01-31 16:49:41 +01:00
a355fdd00d
And another one
...
sorry
2020-01-31 15:40:07 +01:00
b466dad1d7
Fix copy paste issues D2 D5
...
Fixed copy paste
2020-01-31 15:27:19 +01:00
84ecf96be5
Do not clear last print fail stats prematurely
...
M24 was always cleaning the last print failstats. But because M24 is
used to restore a print after power failure (by setting the seek
offset), it would also reset the stats incorrectly after resuming.
Check for the file index position and reset the stats only when a print
is started from the beginning of the file.
Apply the same logic to M32 and similarly handle the LA10->15 conversion
(do not re-apply the adjustment for a resumed print).
2020-01-31 15:08:24 +01:00
857f9d8d9e
Hard reset and readded change
2020-01-31 14:47:44 +01:00
d70a147af5
Merge pull request #2436 from leptun/MK3_PSU_DELTA_cleanup
...
Do not clear axis known position when Z is set to silent
2020-01-31 09:08:14 +01:00
0b62ed3325
Merge pull request #2450 from leptun/MK3_FIX_MINTEMP_FIXED
...
Show correct fixed message
2020-01-31 09:03:11 +01:00
1ceadcb162
Merge pull request #2448 from wavexx/save_restore_fix
...
Save and restore fixes
2020-01-30 16:41:01 +01:00
886c2fdc4e
Show correct fixed message
2020-01-30 17:24:32 +02:00
1b7677c768
Merge pull request #2394 from wavexx/fsensor_no_recursion
...
Avoid more recursive behavior in fsensor_update
2020-01-30 14:18:07 +01:00
1db024f17a
Always raise the extruder 25mm during power recovery
...
Avoids oozed material (drooping more than ~1mm) to scrape and
potentially detach the print.
2020-01-30 13:12:12 +01:00
571906a494
Do not update saved_target if there's no current_block
...
There is a chance that current_block can be NULL despite
the queue being non-empty. This can happen early after a block has been
queued, but before the isr has picked it up for processing, and/or when
the current block is at the last step and is being discarded.
Check for current_block directly to avoid this race.
2020-01-30 13:12:12 +01:00
48a0532e37
Merge pull request #2447 from leptun/MK3_BED_LEVELING_PWM
...
Turn off bed while probing during MBL
2020-01-30 11:18:34 +01:00
8c2902a660
Revert "Mesh bed leveling testing"
...
This reverts commit 28e812d91f
2020-01-29 23:07:53 +02:00
b86aafb56e
Documentation
2020-01-29 23:07:24 +02:00
755230e2e7
fix small mistake
2020-01-29 23:07:24 +02:00
a5198e32a3
Just keep the current state. ON or OFF. No switching allowed
2020-01-29 23:07:24 +02:00
02d1525445
Display "POWER PANIC DETECTED" when possible
...
Both during early init and in uvlo_tiny, display "POWER PANIC DETECTED"
if enough charge is left.
This is not worth doing in regular uvlo_, as we want to give full
priority to the X motor
2020-01-29 21:08:56 +01:00
2b46fdac2d
Only trigger a quick reset if there's a pending saved state
...
Thanks to @leptun
2020-01-29 17:56:26 +01:00
99e81812ce
Merge branch 'MK3' into MK3_BED_LEVELING_PWM
2020-01-29 17:56:10 +02:00
4fd913ddf3
Remove commented out code
2020-01-29 17:45:47 +02:00
b46dc59fad
Refuse to start a print if power is lost before arming uvlo
...
If power has been lost during startup already a falling edge would be
skipped, causing the print to continue and lose its state without
being able to save again.
Check for a low line after arming the interrupt and simply wait
for reset.
2020-01-29 16:06:54 +01:00
200cdde1af
Setup the UVLO interrupt later during initialization
...
Do not allow uvlo_tiny() to trigger before the previous print has
already been recovered.
A quick repeated power failure could cause uvlo_tiny to overwrite
the Z position before it has been correctly recovered.
2020-01-28 21:50:12 +01:00
3e70b73a1f
Remove unnecessary delay in lcd_selftest, which occured there as a result of merge.
2020-01-27 19:02:15 +01:00
3da20db024
Really poweroff Z motors when PSU_Delta is defined
...
enable/disable_z behave differently when PSU_Delta is defined.
During powerpanic and kill however we do *really* need to save energy
and poweroff the motors.
Rename enable/disable_z as poweron/poweroff_z and define some aliases so
that we can use the low-level function where needed.
2020-01-27 18:50:17 +01:00
5d88573711
Save/restore hotend temperatures above 255C in PowerPanic
...
Use 2 bytes to store extruder temperature during UVLO.
Re-use the storage of EEPROM_UVLO_TINY_Z_MICROSTEPS which has been freed
by previous changes.
Fixes #2303
2020-01-27 14:59:18 +01:00
50a9fe003a
Bump the unparking speed to 50mm/s (same as M600 recovery)
2020-01-27 11:08:28 +01:00
eb2ca78167
Rewrite uvlo handling for accurate Z re/positioning
...
- In both uvlo_ and uvlo_tiny, calculate Z usteps properly and adjust
the Z position to a true fullstep before disabling the motor. This
avoids shifs during recovery.
- In uvlo_tiny, instead of moving up indefinitely, adjust Z just
once using the smallest move possible (new def UVLO_TINY_Z_AXIS_SHIFT)
- Perform all the uvlo/recovery processing in physical coordinates
and MBL off: there should be no automatic Z movement!
- Disable heaters in both handlers to conserve more power.
- Add timing information to uvlo_tiny too.
- During recovery, to switch between physical and logical positioning
introduce a new "PRUSA MBL" gcode as most of the procedure is
enqueued, and no existing gcode was available.
2020-01-26 17:46:50 +01:00
11a0e95f60
Re-enable the code that moves the extruder during PP
...
There is frequently plenty of power left during a PP. Take advantage of
it by moving the extruder to either side of the axis to detach
completely the nozzle from the print.
Re-enable Z during this move to avoid losing the current step.
2020-01-26 17:46:50 +01:00
0702e0de6e
Use world2machine instead of repeating code
2020-01-26 17:46:50 +01:00
ec5cbf73b9
During PP keep the watchdog waiting for longer
...
When the printer is connected to a USB host during a PP (and the host
does not lose power), the rambo can linger for longer, sometimes for
long enough to recover the print state. Drain some more power.
2020-01-26 17:46:50 +01:00
ec8b5aaa34
Do not attempt to "zero-phase" the microstep counter
...
If the motors are off-phase, this is more likely to "bump" them to an
incorrect/reverse full-step, doing worse.
We need to ensure the motors are already positioned on a fullstep
during power panic instead.
Remove the PSU_DELTA exception: Z _always_ needs to be powered here.
2020-01-26 17:46:26 +01:00
5310181970
Cancel a recovering print when using the LCD "Stop"
...
Also clear the UVLO flag when using lcd_print_stop. This prevents an
aborted print which has been cancelled while unparking (just prior to
recover) to come back again at the next startup.
2020-01-26 17:45:47 +01:00
4055977a95
Do not clear axis known position when Z is set to silent
...
Also removed unused (forgotten) variable.
2020-01-25 11:41:27 +02:00
6d721c9b82
Merge remote-tracking branch 'upstream/MK3' into MK3-Fix_M120_M121
...
Fix merge with FW3.9.0-beta
2020-01-23 14:46:48 +01:00
2e50954710
Merge branch 'MK3' into MK3_fix_selftest_Z_crash2
2020-01-22 14:56:54 +02:00
73527d6069
selfTest workflow optimalization
2020-01-22 04:45:13 +01:00
7f3d4a8491
Restore the last E axis position correctly after powerpanic
...
- Initially restore the last E position from the eeprom in any case, not
just when using absolute mode (although unnecessary: since it will be
reset later), fixing a possible unitialized position and crash during
recovery (thanks to @leptun)
- Remove useless extra calls to put the extruder in relative mode:
the extruder already starts in relative mode and is later switched to
absolute.
- Replace incorrect calls to STRINGIFY with sprintf_P
- Retract after pressure has been restored in uvlo_tiny, to be
consistent with a regular uvlo (remove the bogus double unretract
as a result).
- Set the real E position prior to the panic *after* the retraction,
using the now-fixed G92.
2020-01-21 17:41:43 +01:00
4c8f1e8b89
Use eeprom_update_word instead of EEPROM_save_B
2020-01-21 16:36:34 +01:00
9ac80f73f2
Remove an useless/duplicate Z move
...
Likely a result of a merge
2020-01-21 16:34:09 +01:00
8437630122
Inhibit serial processing in uvlo_
...
Do not process serial commands when re-enabling the global isr.
While printing via USB and a power panic is triggered, *any* extra
command should be ignored.
Abuse the "saved_printing" variable to inhibit serial processing.
2020-01-21 16:29:12 +01:00
e8f05d0668
Heat both nozzle/bed together while recovering a print
2020-01-21 16:26:16 +01:00
67decb466d
Avoid another call to st_get_position_mm
...
current_position is already filled by planner_abort_hard.
2020-01-21 16:24:19 +01:00
e6ba9e633c
Adjusted hotend, bed and Ambient mintemp values
2020-01-21 14:50:53 +02:00
a2692665f8
Merge remote-tracking branch 'upstream/MK3' into flashair_display_ip
2020-01-18 22:26:52 +09:00
95a2ad533d
Version changed (3.9.0 build 3175)
2020-01-16 16:03:34 +01:00
b09761ed71
Remove '/*' from M46 source
...
I forgot to remove the unintended comment start mark when merge.
It has been deleted.
2020-01-16 21:38:39 +09:00
24b748c4ac
Merge remote-tracking branch 'upstream/MK3' into flashair_display_ip
2020-01-16 21:25:55 +09:00
1d17a37250
all axis -> all axes
2020-01-16 09:15:44 +02:00
ccd3885d84
rephrase G28 W
2020-01-15 23:01:09 +02:00
6a1eb63a52
Add @todo to M999
2020-01-15 22:41:02 +02:00
d676542229
Revert code changes
2020-01-15 22:38:00 +02:00
47ddc2e902
M204 - better old_new separation
2020-01-15 22:35:34 +02:00
622319f86c
Add missing LF
2020-01-15 22:30:53 +02:00
ea51696a68
Merge Special sections as requested
2020-01-15 22:30:43 +02:00
aac66d4a4b
Add missing quote
2020-01-15 22:21:23 +02:00
d95029bbc7
Merge remote-tracking branch '3d-gussner/MK3-Gcode_documentation' into MK3-Gcode_documentation
2020-01-15 20:17:51 +02:00
cabfc37f15
The other changes
2020-01-15 20:17:26 +02:00
5ff6c1f22c
Merge remote-tracking branch 'upstream/MK3' into MK3-Gcode_documentation
2020-01-15 16:36:08 +01:00
4cf4720a15
Even more formatting fixes
2020-01-15 17:27:54 +02:00
7118007efe
Adjustments
2020-01-15 15:52:56 +02:00
7ea00a7efd
Fix typo in page description
2020-01-15 15:31:28 +02:00
8449136520
Separate M117 from the TMC2130 commands
2020-01-15 15:31:14 +02:00
4a4d7976d1
Fix PRUSA typo
2020-01-15 15:30:48 +02:00
55f3e7acaf
Merge branch 'MK3' into MK3-Gcode_documentation
2020-01-15 15:12:18 +02:00
27f6807bd5
Merge pull request #2416 from wavexx/fix_G92_e_reset
...
Fix incorrect usage of plan_set_e_position() in G92 E*
2020-01-15 12:52:13 +01:00
7230b99448
Merge pull request #2393 from wavexx/sync_before_resume
...
Sync before resume
2020-01-15 12:49:56 +01:00
1a8420f3f9
Merge pull request #2383 from wavexx/fix_usb_resume_check
...
Fix fan_check_error check in usb print resume
2020-01-15 12:48:48 +01:00
43870c4028
Merge pull request #2368 from wavexx/unretract_after_lcd_pause
...
Unretract when resuming a paused print
2020-01-15 12:47:24 +01:00
bab756699f
Fix incorrect usage of plan_set_e_position() in G92 E*
...
To maintain an accurate step count (which is required for correct
position recovery), any call to plan_set_position&co needs to be done
synchronously and from a halted state.
However, G92 E* is currently special-cased to skip the sync (likely to
avoid the associated performance cost), causing an incorrect E step
count and position to be set. This breaks absolute position recovery,
miscalculation of the LA factor and possibly other weird issues.
We rewrite the handling of G92 to always sync but still special-case the
frequent "G92 E0" for performance by using a free bit in the block flags.
To avoid a sync, we relay the request for reset first to the planner
which clears its internal state and then relays the request to the final
stepper isr.
2020-01-14 20:24:14 +01:00
99545a006c
M46 "Show the assigned IP address" activated
...
According to the reprap wiki, M46 has been assigned to display its assigned IP address, but has been disabled.
Now that Toshiba FlashAir IP address processing is working, I activate the M46 code so that I can read the IP address information via serial.
2020-01-12 12:45:43 +09:00
2ca1bc0acb
Support W-04 firmware 4.0.0.01+
...
W-04 needs to use CMD17 instead of CMD48 to retrieve iSDIO register memories.
To supporting both W-03 and W-04 card, I changed the readExt() code to use CMD48 first and use CMD17 if it returned some error.
This method is from the FlashAir developer sample code.
https://flashair-developers.github.io/website/docs/tutorials/arduino/2
2020-01-11 21:47:16 +09:00
4c74866864
Merge pull request #1933 from prusa3d/enable_cutter
...
Enable MMU cutter.
2020-01-09 13:47:44 +01:00
32c9cd2307
Merge branch 'MK3' into fix_lcd_stop
2020-01-09 14:17:56 +02:00
b088500eaf
Merge pull request #1909 from wavexx/MK3_LA15
...
Linear Advance 1.5 Returns
2020-01-09 11:22:06 +01:00
29d0537004
Adjusted progress bar
2020-01-08 21:32:45 +02:00
e295c83d09
Folder sorting shellSort
2020-01-08 21:16:08 +02:00
6a7ae6231d
Merge remote-tracking branch 'upstream/MK3' into MK3_Dutch
2020-01-08 16:02:00 +01:00
d895890608
Merge remote-tracking branch 'upstream/MK3' into MK3-Fix_M120_M121
2020-01-08 15:59:16 +01:00
f3668cab92
Merge remote-tracking branch 'upstream/MK3' into MK3-Gcode_documentation
...
Fix merge issues with G90 and G91
2020-01-08 15:47:38 +01:00
7028583e9b
Merge branch 'MK3_ShellSort' into MK3_NEW_SD_COMPILATION
2020-01-08 16:27:31 +02:00
37dc5fed45
Merge branch 'MK3_revised_filename_scrolling' into MK3_NEW_SD_COMPILATION
2020-01-08 16:26:51 +02:00
df300a2488
Merge pull request #2403 from leptun/MK3_unknown_Z_mark
...
Show ? near Z value if the position is unknown
2020-01-08 14:55:37 +01:00
e15d5e21f5
Merge pull request #2402 from leptun/MK3_sheet_on_status_screen
...
Do not show sheet on status screen if less than 2 are initialized
2020-01-08 14:42:29 +01:00
2f2e415eae
Merge pull request #2382 from wavexx/fix_lcd_stop
...
Fix lcd "Stop" when used within a pause
2020-01-08 14:40:54 +01:00
3ef1c52a0a
Merge pull request #2381 from wavexx/remove_relative_mode
...
Remove "relative_mode", only use "axis_relative_modes"
2020-01-08 14:39:43 +01:00
8b0f0695a8
Merge branch 'MK3_fix_shorter_sheet_name_on_status_screen' into MK3_sheet_on_status_screen
2020-01-08 15:31:33 +02:00
9abdf4e535
Show ? near Z value if the position is unknown
2020-01-08 13:46:51 +02:00
c5324291ad
Do not show sheet on status screen if less than 2 are initialized
2020-01-08 12:48:41 +02:00
d9e5283526
Fix pause->stop->PrintFromSD scenario
2020-01-07 21:02:13 +02:00
1996fc7940
Remove commented-out code
2020-01-07 20:43:56 +02:00
4422fc29f8
Set XYZ to absolute and E to relative
2020-01-07 20:42:21 +02:00
f8a0d5d773
Fix lcd_print_stop function
2020-01-07 19:54:06 +02:00
df0d781c20
Merge branch 'MK3' into fix_lcd_stop
2020-01-07 19:53:55 +02:00
1ba89b9689
Merge branch 'MK3' into MK3_ShellSort
2020-01-07 14:18:31 +02:00
b05ee33fc9
Merge branch 'MK3' into MK3_BED_LEVELING_PWM
2020-01-07 07:58:32 +02:00
f923427dc1
Show the FlashAir IP address
...
Displays the FlashAir IP address in the "Support" menu if the card is available.
If no IP address has been assigned yet, "0.0.0.0" will be displayed.
2020-01-04 12:51:20 +09:00
853991865c
Improve raise_z_above to always raise when at Z_MIN
...
When check_z_endstop is set, Z_MIN_PIN is checkend regardless of the
moving direction to support Z calibration. This prevents the ability
to use _just_ SG when moving upwards.
But since we know the extruder is at Z_MIN, it's always safe to raise
irregardless, so we can dodge the issue.
2020-01-02 18:07:30 +01:00
5660fcffb0
Do not enqueue a E/Z moves unless requested
...
Do not unconditionally enqueue a Z move if no move has been requested.
Since Z is calculated using the absolute current (saved) position and
scheduled for later execution, the queue order becomes relevant.
2019-12-30 14:49:07 +01:00
86696156af
Improve K error checking, allow to manually reset the version
...
Properly check K independently for each version by delegating it to la10c_value()
Handle -1 as a special case to allow manual reset.
2019-12-30 14:31:39 +01:00
57be14fca6
Complete all pending moves before restoring a saved print
2019-12-30 13:30:06 +01:00
fd0ed1f0ea
Move LA reset from G28 to G80, do not reset on 0
...
In preparation for #2161 , use MBL (G80) as a "new print" boundary
instead of just re-homing to ensure the reset is issued only once for
each print.
Similarly, do not reset the autodetection when LA is disabled via M900
K0. This can/will be used during a print if different quality settings
are used for different filling roles.
2019-12-30 11:32:27 +01:00
d78636c308
Do not synchronize on M900
...
Since the advance factor is computed per-segment in LA15, there's no
need to stop the planner. Allow changing K freely at each segment.
This allows varying quality factors for different filling roles, see:
https://github.com/supermerill/Slic3r/issues/108
During pause/resume/crashdetect or powerpanic K might temporarily be out
of sync when used this way. If this becomes an issue, we might need to
store K for each block, as done for the feedrate.
2019-12-29 23:25:16 +01:00
f5d382f9f4
Remove useless st_synchronize calls when unparking
2019-12-29 22:20:24 +01:00
186f881600
Avoid calling fsensor_update() one level earlier
...
Move the common checks between filament sensors out of fsensor_update().
Disable the runout check if a saved state is already present (this check
was missing in the PAT9125 variant) as this is currently not supported.
Note that the CHECK_FSENSOR looks completely redundant besides
e_active().
2019-12-29 22:08:44 +01:00
bd80ee88a0
Set the IN_HANDLER busy state while checking the filament
2019-12-29 21:27:42 +01:00
97170ed68d
Do not call process_commands() within fsensor_update()
...
Plan moves directly to reduce the required stack size.
2019-12-27 19:37:20 +01:00
fe4c00fb8a
Lift the extruder when checking for the filament
...
This avoids leaving marks on the print
2019-12-27 19:35:08 +01:00
301d64042b
Set fsensor_watch_runout earlier to prevent re-entry
...
Do not set/clear fsensor_watch_runout within fsensor_oq_meassure_start
which is used outside of fsensor_update where it could have a different
starting value.
Set it within fsensor_stop_and_save_print to immediately prevent
re-entry.
2019-12-27 19:34:36 +01:00
a31319888c
Fix fan_check_error check in usb print resume
...
Also check for fan_check_error == EFCE_OK in addition to EFCE_FIXED.
Reorganize the check in order to fix both #if[n]def FANCHECK cases,
as similarly done in the SDSUPPORT case a few lines below.
2019-12-23 19:12:46 +01:00
7b29ce29b4
Add a Linear Advance 1.0->1.5 compatibility layer
...
Allow existing gcode using LA10 to transparently take advantage of LA15
by using a simple linear conversion function based on experimental
results with the MK3 implementation of linear advance.
Autodetect LA10 values based on the first M900 instruction contained in
the print. In order to support printing mixed files without resetting
the printer we also reset the autodetection status when starting a new
SD print and/or when explicitly disabling LA.
Since we cannot reliably detect whether a new print is started when
printing via USB, also reset the detection status when homing in G28,
which is generally performed once at each print. Note that this doesn't
clear the previous K value, it only allows a subsequent M900 to provide
LA10 values when printed after a LA15 file.
2019-12-21 23:22:35 +01:00
c0ae92cd2a
Remove "relative_mode", only use "axis_relative_modes"
...
axis_relative_modes can cleanly handle G90/G91 and M82/M83 without the
need of "relative_mode" entirely.
Change G90/G91 to simply reset all axes according to the requested
state, which avoids to check two variables in get_coordinates(),
fixing the following incorrect handling:
G91 ; all axis relative
M83 ; set extruder absolute
G1 E1 ; should be an absolute move, but still relative
2019-12-20 18:47:30 +01:00
8d60e4d6db
Merge remote-tracking branch 'upstream/MK3' into MK3_LA15
2019-12-18 18:28:41 +01:00
f071aec747
Fix sheet minimum width on the status screen
2019-12-18 08:52:25 +03:00
f0f7db57ea
Fist attempt at "saved position SD menu"
2019-12-17 00:45:25 +02:00
3ad611ca16
Merge branch 'MK3' into MK3_revised_filename_scrolling
2019-12-16 21:39:27 +02:00
8d490f941a
Make use of the CRITICAL_SECTION macros in lcd_print_stop
2019-12-16 16:39:20 +01:00
0cc68228f8
Unretract when resuming a paused print
2019-12-16 16:33:11 +01:00
955c88cf68
Merge pull request #2370 from wavexx/no_resume_while_resuming
...
Do not allow to resume a print twice while waiting for the hotend
2019-12-16 16:26:02 +01:00
faa76df2fe
Fix the "Stop print" behavior from the LCD
...
Correctly cleanup the printer state when stopping the current print:
- Disable interrupts while aborting the planner/queue to ensure
new serial commands are not inserted while aborting
- _Always_ call planner_abort_hard() to interrupt any pending move!
- Clear the saved_target, which might be set when calling stop
from within a paused state. Create a new function to clear the
paused state for future use.
- Do not disable/reset the MBL: doing so will destroy the ability to
restart correctly using M999.
2019-12-16 15:52:37 +01:00
a8e6020238
Fix VERBOSITY
2019-12-16 15:21:55 +02:00
348bbbffb0
Do not allow to resume a print twice while waiting for the hotend
...
Clear isPrintPaused just prior to restore_print_from_ram_and_continue.
2019-12-15 22:22:44 +01:00
d4fab1a713
Merge pull request #2304 from 3d-gussner/MK3-Fix_M81
...
Fix M81 Turn off Power Supply...
2019-12-15 11:52:56 +01:00
c45d4f4bba
Merge pull request #2088 from rhounsell/MK3
...
Fix for Toshiba FlashAir (or other) SD card initialization
2019-12-15 11:46:56 +01:00
44288bfe90
Merge pull request #2309 from leptun/MK3_fix_MMU_pause_time
...
Fix MMU needs user attention Statistics error
2019-12-15 11:04:57 +01:00
d6ac9e4638
Merge pull request #2342 from vintagepc/2306-hard-reset-homing-fails
...
Fix #2306 hard reset homing fails
2019-12-15 10:51:52 +01:00
c122399020
Merge pull request #2270 from leptun/MK3-PFW-1024
...
PFW-1024
2019-12-15 10:25:37 +01:00
d68d9c7fef
Merge pull request #2058 from leptun/MK3_fix_warnings
...
Fix "LANG_MODE 0" warnings
2019-12-15 09:29:27 +01:00
770fcd7c42
Merge branch 'MK3' into MK3-PFW-1024
2019-12-14 10:08:52 +02:00
6ab3b20ce1
Merge pull request #2348 from leptun/MK3_fix_kill
...
Fix kill messages
2019-12-13 18:30:27 +01:00
1423de10a9
Merge pull request #2362 from leptun/MK3_Fix_Lang_64K_limit
...
Fix optiboot erase function after address 0xFFFF. Allows language files greater than 64K
2019-12-13 13:59:23 +01:00
30cee7afca
Merge pull request #2353 from wavexx/lcd_pause_fixes
...
Fix the LCD pause (regression)
2019-12-13 13:53:29 +01:00
838cec75ec
Merge pull request #2352 from wavexx/fix_m603_regression
...
Use lcd_print_stop() in M603, fix octoprint regression
2019-12-13 13:52:40 +01:00
a1bc4cc5dc
Merge pull request #2332 from leptun/MK3_Octoprint_fIxes
...
Do not check for fanError if it is not enabled on resume
2019-12-13 13:47:56 +01:00
89dfb00b04
Fix optiboot erase function after address 0xFFFF
2019-12-08 08:43:43 +02:00
0b9123ce24
Fix Live K, allow "Advance K" to be translated
2019-12-05 15:18:24 +01:00
5122f79a39
Merge remote-tracking branch 'upstream/MK3' into MK3_LA15
2019-12-04 17:27:23 +01:00
19589f02f1
Remove an unused define
2019-12-04 17:22:21 +01:00
17e23693eb
Fixed stuipid copy paste error
2019-12-04 14:21:43 +01:00
0cafd10378
minor fix
2019-12-04 13:43:19 +01:00
f7bfca3061
Fix merge issues
2019-12-04 13:39:56 +01:00
7da1db2f25
Merge remote-tracking branch 'upstream/MK3' into MK3-Gcode_documentation
2019-12-04 13:35:09 +01:00
fb3c65b3dc
fixed links to RR Wiki
2019-12-04 12:38:43 +01:00
cdc6beaf6f
Added M910 -> M918
2019-12-04 12:25:33 +01:00
a5f3027ee1
D2130 updated
...
Needs review
2019-12-04 11:38:29 +01:00
8448b8d413
Keep destination updated in an aborted plan as well
...
When aborting the plan destination is updated anyway to reflect the latest
position. There's no use in this additional check.
2019-12-03 20:37:13 +01:00
063d0421ac
Call long_pause from the main loop (again)
...
After calling stop_and_save_print_to_ram, perform the parking moves
within the main loop as done before PR#1899 to avoid planning within
an interrupted move (which would clear the abort flag too soon).
2019-12-03 20:37:13 +01:00
d60230e494
Add some documentation
2019-12-03 20:37:13 +01:00
792d7ca6dc
Turn off heaters just prior to retraction to limit oozing
2019-12-03 20:37:13 +01:00
4fce74140a
Also abort planning in stop_and_save_print_to_ram
...
Similarly to resume_print_from_ram_and_continue, abort any
planning in mesh_plan_buffer_line already in stop_and_save_print_to_ram
in case it is called for pausing only.
2019-12-03 20:37:09 +01:00
0ce7c51c1d
Added more D-codes to RR Wiki and doxygen
...
D-1, D80, D81, D106
2019-12-03 20:02:58 +01:00
454e99dbb5
Use lcd_print_stop() in M603, fix octoprint regression
...
M603 shouldn't report a fatal error state.
Use lcd_print_stop().
Regression introduced in PR #2274
2019-12-03 16:51:59 +01:00
63655a906a
Merge branch 'MK3' into MK3_revised_filename_scrolling
2019-11-30 01:31:48 +02:00
56193ea252
Merge branch 'MK3' into MK3_TONE
2019-11-29 23:16:46 +02:00
e7f2577233
Fix kill messages
2019-11-29 22:49:22 +02:00
103e29d38a
Merge branch 'MK3' into MK3_ShellSort
2019-11-29 16:52:20 +02:00
15bfb7013d
Merge pull request #2274 from wavexx/fix_mesh_plan_buffer_line
...
PFW-1028: Fix recovery from filament sensor checks / crash detect / power panic
2019-11-29 15:18:15 +01:00
779423f0e7
Move hardcoded values to variants
2019-11-29 15:06:54 +02:00
a413cfbb9a
Merge branch 'MK3' into MK3-PFW-1024
2019-11-29 13:07:45 +02:00
dbe2ed4150
Fix pause/resume when using M25/M601
...
Remove the conflicting and mostly useless card.paused flag (the printing
is either paused, or not) and switch to isPrintPaused only which
accounts for both cases (SD/USB) correctly.
Fix M27/getStatus to show the current real status of the SD print.
Synchronize the queue on M601, as required to precisely pause the print
at the correct instruction.
Alias M25 to M601, which when combined with PR #1899 fixes issue #1614 .
Guard against incorrect usage in M601, M602 and M603.
2019-11-28 17:37:58 +01:00
18eaf21baf
Halve memory usage of saved feedrate
...
Truncate the saved feedrate to an uint16_t.
This is more than sufficient for recovery.
2019-11-28 17:16:37 +01:00
17176c1df2
Save/restore the default feedrate correctly
...
Since the global feedrate can be similarly modified for moves ahead of
time, save the original feedrate in the planner as we do for
gcode_target.
This avoids having to undo feedmultiply (and machine limits!) from
"nominal_speed" as previously done.
Thanks @leptun
2019-11-28 17:16:37 +01:00
4f0af648fb
Save/restore feedmultiply independently of the feedrate
2019-11-28 17:16:36 +01:00
6ecff003b7
Fix M600 insertion by the filament sensor
...
Remove incorrect usage of stop_and_save_print combined with the
fsensor_recovert internal instruction which would result in a
broken sequence of events and/or broken stack.
Re-use the now safe stop/recover functions in the same spot
(fsensor_checkpoint_stream) to effectively cut a hole in the current
gcode stream to insert an M600 instruction, which removes all
recursive behavior without the need of extra state variables.
2019-11-28 17:13:37 +01:00
4268c2fdae
Fix recovery from relative/chunked moves
...
When starting to replay existing USB/SD commands from a recovery state,
an immediate relative move needs to compensate for a previously
interrupted move. This is almost the norm for the E axis.
Instead of saving the relative status of the move (which needs to
account for the world2machine conversion and is not always available on
a chunked move split by MBL) save directly the calculated target
position for the move in the original plan, which is easy to replay.
2019-11-28 16:42:35 +01:00
faa9e925fe
Replace a few loops with set_current_to_destination()
2019-11-28 15:57:21 +01:00
5fa7c178b5
Do not set current_position in mesh_plan_buffer_line
...
This is a task which _has_ to be performed by the caller,
such as prepare_move().
2019-11-28 15:57:21 +01:00
0f6b9b4051
Unroll the stack in restore_print_from_ram_and_continue
...
While handling moves in a recursive plan, such a filament check,
ensure restore_print_from_ram_and_continue unwinds the stack by
aborting early from any call that waits on the planner.
This currently only handles G1 moves, but hard-coded behavior that can
trigger recursive behavior (such as filament change) will probably have
to be checked too.
2019-11-28 15:57:20 +01:00
404802b5e6
Clear "sdprinting" state only when all SD moves are complete
...
Ensure card.printingHasFinished sees all the planned moves before
clearing sdprinting. To do that, we need to ensure all SD commands
exited the command queue.
2019-11-28 15:57:20 +01:00
7753750fa7
Change for to while
2019-11-27 17:31:47 +02:00
660b646b57
RR Wiki for Dcodes
...
open D-1, D80, D81, D106, D2130
2019-11-27 11:29:55 +01:00
11ba616d73
Define for dumping sorting process
2019-11-27 11:03:34 +02:00
475551431c
How does M862.5 P works???
2019-11-26 20:21:05 +01:00
84cb373905
More G codes documented in RR wiki
...
M44, M45, M47, M403, M509, M851, M601, M602, M603, M862
2019-11-26 20:11:55 +01:00
66e51aa298
Folder sorting finished
2019-11-26 15:49:45 +02:00
f5bdbcc0bd
Cleanup file compare statement
2019-11-26 14:10:44 +02:00
a7f2e640e0
Put folders at the beginning
2019-11-26 13:57:08 +02:00
5eaf6f0133
Merge branch 'MK3' into MK3-Gcode_documentation
...
Merge with MK3 branch
2019-11-26 12:48:21 +01:00
960f4a88ed
Status bar, lcd optimization, compile warning fix
2019-11-26 13:36:28 +02:00
f87b5a2be7
SORTING_DUMP
2019-11-26 12:18:11 +02:00
b803b2a2dd
Another first implementation
2019-11-26 11:29:57 +02:00
35ce2896bb
Merge pull request #2339 from leptun/PFW-943
...
PFW-943: IR sensor gen. II - Updated PR
2019-11-25 06:23:24 +01:00
abb220ff69
Merge pull request #2323 from Panayiotis-git/MK3_Fix_M603
...
Add oversighted ‘break’ statement at the M603 command's source
2019-11-25 06:04:41 +01:00
d40656e3ca
Small changes to rendering
2019-11-24 19:16:22 +02:00
273d834b19
Fix card removal
2019-11-22 20:27:24 +02:00
2fd192a95d
Set scroll delay to 300ms
2019-11-22 20:14:55 +02:00
fdab70fa3a
Dir fixes
2019-11-22 14:39:21 +02:00
982c4cbf7b
Candidate fix for homing fail hard reset
2019-11-21 18:51:02 -05:00
8a806bceea
SDDIR
2019-11-21 21:32:52 +02:00
6538262e75
First build that actually works
2019-11-21 19:04:45 +02:00
8f901d2613
Temporary fix
2019-11-21 14:58:13 +02:00
b3a587f5a4
SD first attempt. Broken
2019-11-20 20:25:51 +02:00
45b89c5728
Fix typo
2019-11-19 13:55:37 +02:00
e66574ac5f
Updated branch to use TOGGLE
2019-11-19 13:51:10 +02:00
6e2793566c
Merge branch 'MK3' into PFW-943
2019-11-18 14:43:46 +01:00
b077303156
Fix compile error
2019-11-17 11:10:13 +02:00
14104e7bf9
Clear error flag when fanError is disabled
2019-11-17 10:44:11 +02:00
2e0034d915
Update Toggles and Translations
2019-11-17 09:53:14 +02:00
359c447127
Do not check for fanError if it is not enabled on resume
...
Fix typos
2019-11-16 22:44:34 +02:00
07b6173aaa
Merge branch 'MK3' into MK3-PFW-1024
2019-11-16 11:28:29 +02:00
e2e32b455a
Merge pull request #2247 from mkbel/reset_live_Z+offset
...
Show current Z offset in reset dialog before first layer calibration
2019-11-15 17:52:29 +01:00
460f6c3b5e
update message
2019-11-15 17:47:39 +01:00
86ea24c364
Merge pull request #2273 from wavexx/do_not_wait_for_disabled_heater
...
Do not wait forever if the heater on the extruder is disabled
2019-11-15 17:19:11 +01:00
715794d854
Merge pull request #2092 from leptun/MK3_Translations
...
PFW-1062: Mk3 Toggle and Translations
2019-11-15 16:53:17 +01:00
3a41405f52
Merge pull request #2146 from vintagepc/MK3-2093-sheet-display
...
PFW-1061: #2093 - Relocate sheet menu, show sheet on info screen
2019-11-15 16:07:51 +01:00
f6c35c5d5f
Removed separate fix for #2089
...
Per PR fix request
2019-11-15 08:58:58 -05:00
8fae50ec79
Merge pull request #2315 from mkbel/finda
...
PFW-1047: Show FINDA state as N/A if last received response is older than 1s.
2019-11-15 12:53:01 +01:00
56251c4f99
Merge pull request #1937 from arons/MK3
...
added new function belt test under calibration menu
2019-11-15 09:39:42 +01:00
9e780f0b2b
remove ESC sequence
2019-11-15 09:26:56 +01:00
e559a6b67f
Merge branch 'MK3' into MK3_BED_LEVELING_PWM
2019-11-13 14:32:57 +02:00
28e812d91f
Mesh bed leveling testing
2019-11-13 14:32:33 +02:00
23cf076242
Add oversighted ‘break’ statement at the M603 command's source
2019-11-12 21:32:39 +02:00
11428388c6
MBL toggle and cleanup
2019-11-09 20:58:56 +02:00
20a59f5f40
Temp cal.
2019-11-08 19:44:48 +02:00
422e7fde4a
Merge branch 'MK3' into MK3-Gcode_documentation
2019-11-08 18:16:56 +01:00
c82fa07299
Merge pull request #2195 from leptun/MK3-fix-LFN
...
Fix short filenames scrolling in sdprint menu and status screen
2019-11-08 16:52:53 +01:00
21dd8eadd1
Merge pull request #2188 from mkbel/cut_last_try
...
Use MMU cutter only as last resort.
2019-11-08 16:49:28 +01:00
ce5efb107a
Merge pull request #2155 from leptun/MK3_SD_scroll_workaround
...
SD Scroll workaround
2019-11-08 16:48:38 +01:00
4cf2f05d1d
Merge pull request #2057 from leptun/MK3_fix_M350
...
M350 for all axis - MK3
2019-11-08 16:15:15 +01:00
a14d7545a5
Update Marlin_main.cpp
2019-11-08 16:06:42 +01:00
b33c79e6c7
Merge pull request #1899 from wavexx/fix_lcd_pause_function
...
Fix the LCD pause function
2019-11-08 14:55:13 +01:00
42d70f3dea
Merge pull request #1768 from wavexx/unknown_z_improvements
...
"Unknown z" improvements
2019-11-08 14:52:56 +01:00
1de353dd09
Merge branch 'MK3' into MK3_Translations
2019-11-07 17:02:45 +02:00
5bd995b21b
Added more info to doxygen G-Codes
2019-11-06 11:14:06 +01:00
e6eeafd20c
More M-Commands ...
2019-11-05 15:47:04 +01:00
ca234a11ed
M-Commands to M240
2019-11-05 12:40:51 +01:00
8114bd5b1c
Merge with MK3 and few spaces
2019-11-05 09:05:05 +01:00
58404b9c9d
Merge branch 'MK3' into MK3-Gcode_documentation
2019-11-05 09:04:52 +01:00
e56cb14bb9
Merge pull request #1739 from draeath/MK3-fix-sdcard-sorting
...
use modification times for sdcard time sorting. fixes #477
2019-11-04 17:31:38 +01:00
3c26f7855b
Merge pull request #1704 from leptun/MK3_Enable_fan_waiting_cooldown
...
Enable print fan while waiting for cooldown
2019-11-04 16:52:26 +01:00
459385708e
Fix MMU needs user attention Statistics error
2019-11-02 13:15:13 +02:00
cd5ff783cf
General fixes and improvements to code
2019-10-31 19:07:20 +02:00
76c39ce689
Show FINDA state as N/A if last received response is older than 1s.
2019-10-31 17:45:22 +01:00
4501f9d760
M commands documentation #2
2019-10-31 15:46:23 +01:00
21dcfb23f4
Follow RepRap Wiki G-codes documentation
...
M120 is Enable endstops
M121 is disable endstops
I guess this was just a typo issue.
2019-10-31 15:31:08 +01:00
c899320590
Fix M81 Turn off Power Supply...
...
... as it should be active if PS_ON_PIN is defined and assinged to an actual pin.
2019-10-31 15:08:07 +01:00
1e09f8c003
Wake on certain events
...
EEPROM DIM and BRIGHT values swapped!!!
2019-10-30 21:11:19 +02:00
ce8dbb5013
M commands documentation #1
2019-10-30 18:52:25 +01:00
b9dca5f895
other doxygen format changes
2019-10-30 15:52:27 +01:00
d472f0730c
Change doxygen format
2019-10-30 15:50:23 +01:00
986ac95c45
G codes documented ... next M commands
2019-10-30 11:19:51 +01:00
8f05627747
Update #1 gcodes doxygen documentation
...
added some RepRap G-codes Wiki external links.
2019-10-25 13:04:04 +02:00
c772fd2cae
Merge branch 'MK3' into MK3_Dutch
2019-10-24 16:44:27 +02:00
023ce01f9d
Version 3.8.1 final.
2019-10-24 16:12:46 +02:00
a4211da8f0
Merge branch 'MK3' into MK3_Dutch
2019-10-24 15:39:32 +02:00
b603528bfd
Merge pull request #2291 from DRracer/lang-381-fixes-4
...
Lang 381 fixes 4
2019-10-23 15:04:39 +02:00
e25befa175
Fix include guard to silence duplicate declaration warnings
2019-10-22 15:49:10 +02:00
50231b76da
Improved handling of unknown Z position
...
- Introduce raise_z_above to move Z carefully when the current position
is potentially unknown, using stallguard
- Use raise_z_above for:
* filament loading/unloading clearance
* extruder spacing when preheating (to avoid buildplate marks on PEI)
* before homing to avoid damaging the build plate and to avoid
repeated Z moves as well
Since raise_z_above is conditional, it will only raise when needed.
Calling raise_z_above when the extruder position is unknown and already
at maximum travel is safe and will prevent further vertical moves.
2019-10-22 15:49:10 +02:00
d32fd1d893
Better EN for new messages
2019-10-22 09:11:47 +02:00
4943e17bda
Preserve power during PP by turning off backlight
2019-10-19 18:45:31 +03:00
d7b12faa95
Add "Brightness" to Tune menu
2019-10-19 18:45:04 +03:00
0ed4a23ae7
And another compile fix...
2019-10-18 12:42:55 +03:00
9fc42526e7
Backlight always on during calibration
2019-10-18 12:18:43 +03:00
91e94aa0e8
Adjustable timeout
2019-10-18 10:32:41 +03:00
d432c3644d
Enable beeping after fan error is fixed
2019-10-18 09:13:19 +03:00
ea8d9ae49d
Merge branch 'MK3' into MK3_Octoprint_fIxes
2019-10-18 08:45:22 +03:00
ace1d7049a
Reenable command processing when issue is fixed if printer not active
2019-10-17 17:49:15 +03:00
812eafd09c
Fix compile for miniRambo
2019-10-17 13:14:32 +03:00
25e0d23efe
Backlight overhaul and UI changes
2019-10-17 13:11:32 +03:00
04bfe674df
tiny lang fixes, part 1
2019-10-16 16:32:49 +02:00
3b005ae38f
Backlight detection
2019-10-16 14:40:45 +03:00
5a4126e00c
Merge pull request #2263 from leptun/MK3-Fix_PSU_DELTA_SILENT
...
PSU_DELTA fix force_high_power_mode()
2019-10-16 13:22:22 +02:00
7f3ba499a0
Do not wait forever if the heater on the extruder is disabled
2019-10-15 20:54:00 +02:00
5a662413e6
Fix compile for printer without backlight support
2019-10-13 14:34:04 +03:00
75f389a71d
Auto-Dimming initial
2019-10-13 14:31:43 +03:00
4703853a3d
Small fixes
2019-10-12 13:19:17 +03:00
350e27810a
fix selftest Z crash. Use stallGuard when testing Z
2019-10-11 21:00:51 +03:00
b2a1dc6786
Compile fix for firmware without LCD_BL_PIN
2019-10-11 19:23:38 +03:00
68491c9d4d
First implementation
2019-10-11 19:06:37 +03:00
e3ac2e2509
PSU_DELTA fix force_high_power_mode()
2019-10-10 19:01:57 +03:00
dde61bb444
Automaton changes. Keep heater ON during probing only if pwm is high
2019-10-06 12:44:45 +03:00
7650e2b60c
Handle disable_heater()
2019-10-06 12:43:03 +03:00
570b5989f4
Disable bed PWM while probing bed.
2019-10-06 10:50:11 +03:00
219a5e0625
Initialize EEPROM_SILENT in one place both for MK3 and MK25 printers and make it more clear.
2019-10-03 21:25:52 +02:00
b52f42b397
Merge branch 'MK3' into MK3_Dutch
2019-10-03 18:54:53 +02:00
0dde5e3167
Increase version.
2019-10-03 17:37:22 +02:00
4fc4cf9c11
Increase version and commit number.
2019-10-03 17:30:14 +02:00
7feb763643
Move check for clear EEPROM just after factory_reset() to ensure nothing is written to EEPROM before check.
...
Fix wizard not starting after Factory RESET / All Data on MK25 printer.
This was broken by:
Author: leptun <voinea.dragos.alexandru@gmail.com>
Date: 3 weeks ago (9/12/2019 6:16:31 AM)
Commit hash: 78708903e8
2019-10-02 18:38:46 +02:00
a4e9f08e16
Merge branch 'MK3' into MK3_Dutch
2019-10-02 11:11:28 +02:00
05e23d1468
Merge branch 'MK3' into MM_lay1_cal
2019-10-01 23:08:11 +02:00
ff7260dc6e
Merge pull request #2246 from mkbel/reset_live_Z
...
Reset live z
2019-10-01 23:02:40 +02:00
74a1c9341b
Revert "Use content supplied strings for lcd_first_layer_calibration_reset(), as we have translations prepared for release. It will be reverted later to show current Z offset."
...
This reverts commit ca9ef3aba1
2019-10-01 22:57:59 +02:00
ca9ef3aba1
Use content supplied strings for lcd_first_layer_calibration_reset(), as we have translations prepared for release. It will be reverted later to show current Z offset.
2019-10-01 22:57:15 +02:00
210d7f6bf1
Merge pull request #2245 from DRracer/knob-long-press
...
Knob long press fixes
2019-10-01 22:33:26 +02:00
087d3cb250
Continue to lcd_v2_calibration() after selection is made in lcd_first_layer_calibration_reset(). Do not ask for selection if sheet is not calibrated, it is calibrated to zero offset or no first layer calibration was ever made.
2019-10-01 21:04:00 +02:00
aabf7655dc
Do all text formatting in first layer calibration reset dialog in one line.
2019-10-01 19:20:36 +02:00
6bd35bfa2f
Increase MENU_DEPTH_MAX to 7 to allow sheet calibration with MMU
2019-10-01 19:43:30 +03:00
7c3f397a62
Print sheet name and Z offset in first layer calibration reset dialog.
2019-10-01 18:22:12 +02:00
b39f09b68e
Merge branch 'MK3' into MM_lay1_cal
2019-10-01 19:20:50 +03:00
d044d3b7b5
Merge pull request #2244 from MRprusa3d/PFW-1008
...
EEPROM_BABYSTEP_Z using removal
2019-10-01 18:04:09 +02:00
f3c3526aa5
fix the knob long-press causing hang in modal dialogs
2019-10-01 17:13:36 +02:00
ed13788e0c
EEPROM_BABYSTEP_Z using removal
2019-10-01 16:57:37 +02:00
9ae75612b5
Fixes after first feature tests
2019-10-01 15:31:01 +02:00
06187f52f3
Merge pull request #2230 from leptun/MK3_Octoprint_fIxes
...
Mk3 Fan error fix
2019-10-01 11:34:55 +02:00
72aed3c544
Allow knob-long-press only in listed menus
2019-10-01 10:51:02 +02:00
543ad6eb41
Ask to reset Z offset before first layer calibration.
2019-09-30 19:58:09 +02:00
9d57f9c365
Fix fan_error_selftest() mistake
2019-09-30 20:30:09 +03:00
61c7479579
Code cleanup: Move texts to messages.c/h
2019-09-30 20:16:01 +03:00
30f325c81d
Extract fan_error_selftest to function for readability
2019-09-30 20:01:31 +03:00
aa50479da5
Merge pull request #2231 from MRprusa3d/PFW-873c
...
default nozzle diameter for farm mode
2019-09-30 18:36:25 +02:00
aba9d1c360
Merge branch 'MK3' into MM_lay1_cal
2019-09-30 18:13:57 +02:00
d31abd4bce
Merge pull request #2240 from leptun/MK3_fix_SD_workDirDepth
...
fix workDirDepth not reset after card init.
2019-09-30 17:32:46 +02:00
bf09eb943d
fix workDirDepth not reset after card init.
2019-09-29 21:09:11 +03:00
8c7015df53
Document set current command.
2019-09-27 15:42:31 +02:00
ff9a6c8177
Prevent fan error while checking fan functionality
2019-09-26 20:52:29 +03:00
dfd3f34351
Check for minimum fan speed. Should be achievable by both fans in 1s.
2019-09-25 22:35:35 +03:00
9c22692827
Fix Cancel Print command processing
2019-09-25 22:34:31 +03:00
4d149f0dfa
Do not send useless keepalive messages after print is canceled from lcd
2019-09-25 18:50:29 +03:00
532d1fc4ae
Fix "Resume Print" missing when doing a normal pause
2019-09-25 18:32:35 +03:00
14b72d2b46
Prevent timeout when printing from SD with USB host connected
2019-09-25 18:12:19 +03:00
c3b7b5ebb5
Check fans before resuming
2019-09-25 15:58:07 +03:00
89de5aac77
default nozzle diameter for farm mode
2019-09-23 17:13:33 +02:00
3c17f7e145
No need to check the fan in the menu
2019-09-22 14:04:58 +03:00
049cca297b
Merge branch 'MK3' into MK3_Dutch
...
Merge with MK3 and fix merge issues
2019-09-21 11:54:31 +02:00
2363f19a62
Minor tweaks for usb printing
2019-09-20 21:07:20 +03:00
139c37c744
allow only one string translation constraint defintion per line
2019-09-20 13:01:07 +02:00
fd01942db8
FAN Error fix - Initial
2019-09-19 20:48:59 +03:00
2afeb65811
return failStatsFmt that fell out in merge
2019-09-19 18:39:25 +02:00
f50cef8361
Merge remote-tracking branch 'upstream/MK3' into translations-doc
...
and resolve ultralcd.cpp conflicts
2019-09-19 18:10:20 +02:00
68359687f8
Merge pull request #2202 from DRracer/lang-381-fixes
...
dialogs' layouts fixes + FR polished
2019-09-19 16:33:26 +02:00
17cca89993
Merge remote-tracking branch 'upstream/MK3' into translations-doc
2019-09-18 15:17:28 +02:00
e7273ea505
Fix [French translation] Wrong display during mesh bed calibration #2218
...
minor code/doc improvements
2019-09-18 12:49:44 +02:00
c1bf4a6288
Merge pull request #2216 from michalrudolf/MK3-miniopravy
...
Mk3 miniopravy
2019-09-18 11:34:17 +02:00
9ff0b7c3a5
Merge pull request #2199 from leptun/MK3_MK2.x_fix_Default_stepper_power
...
Mk3 mk2.x fix default stepper power
2019-09-18 11:05:23 +02:00
19a8537901
Document.
2019-09-17 20:35:18 +02:00
027b6238fd
Mark code unused when PINDA_THERMISTOR is defined by macro. Saves 1B of RAM and 4B of FLASH memory.
2019-09-17 20:26:03 +02:00
966d9baf2b
Document.
2019-09-17 19:00:03 +02:00
14933f6b0e
Fix. Sound [assist], Z-probe [5], menu_fmt_float13off format for last
...
string parameter from PROGMEM
2019-09-17 16:50:51 +02:00
b660cb3908
ultralcd.cpp
2019-09-17 11:46:29 +02:00
77c4720c8b
Merge remote-tracking branch 'upstream/MK3' into translations-doc
2019-09-17 11:32:27 +02:00
b4e0c2f455
Update ultralcd.cpp
...
Menu Support -> XYZ calibration details -> 3. obrazovka "point offset"
X value is no longer moved to the left if there’s no negative sign
2019-09-17 10:51:43 +02:00
c66b4bd876
Do not ask for preheat temperature twice if calibrating first layer from wizard without filament.
2019-09-16 21:14:17 +02:00
e1cfd6dc4f
Remove option to heat nozzle only from mFilamentItem() when activated from wizard, as it has no use after filament unload was removed from wizard.
2019-09-16 18:48:52 +02:00
ff4450489b
Document.
2019-09-16 18:38:44 +02:00
002a7d31a4
Make lcd_wizard() more debug friendly.
2019-09-16 18:31:12 +02:00
b99038736c
Use eeprom_update_byte instead of eeprom_write_byte
2019-09-16 18:22:34 +02:00
d491a9801d
Update ultralcd.cpp
2019-09-16 16:04:45 +02:00
0e1d559f03
Merge branch 'MK3' into PFW-943
2019-09-16 15:29:28 +02:00
011468598e
IR sensor gen. II
...
disconnected PCB detection
2019-09-16 00:43:37 +02:00
9a7a909c6f
Prepare adding new language
2019-09-14 15:49:33 +02:00
695f938348
Fix conversion warnings
2019-09-14 12:24:45 +03:00
e828798209
Fixes after merge and line buffer
...
General fixes to the lcd_edit_off item and improved way to generate the toggles.
The old process is this: Write '>' if required -> print base -> pad everything before the last character with spaces -> write the eol character -> jump back and print the toggle over the blank characters. This resulted in noticeable flickering when the toggle was redrawn and was showing the same thing. Now the process is similar, except that everything happens in a "line buffer" (a char buffer that holds an entire line) and gets printed in one go, avoiding jump instructions for the lcd and prevents flickering since it doesn't write ' ' and the letters afterwards.
This should get even better when the lcd_buffer gets implemented since the line_buffer will get compared to the existing data on the screen and avoid overwriting what is on the lcd with the same thing.
2019-09-13 21:21:42 +03:00
015b34de05
Alert user in wizard about more sheets presets.
2019-09-13 17:09:11 +02:00
4423106fad
dialogs' layouts fixes (support menu dlgs, statistics etc.)
...
French translation polished
2019-09-13 16:55:05 +02:00
e754780717
Fix condition for returning to wizard. eFilamentAction == FilamentAction::Preheat was never true as eFilamentAction is set to eFilamentAction::None in lcd_return_to_status().
2019-09-13 00:19:37 +02:00
f1d190d2d5
Do not ask same filament related question twice if starting first layer calibration from wizard.
2019-09-12 23:41:42 +02:00
ebf405d589
Preselect "yes" for filament question in first layer calibration wizard.
2019-09-12 23:20:03 +02:00
d256c18635
Fix first layer calibration wizard. Do not jump to WizState::LoadFil if calibration is supposed to be performed.
2019-09-12 23:17:19 +02:00
73642632f5
Do not force PLA filament in first layer calibration from wizard. Remove duplicate variable wizard_active. Saves 410 B of FLASH and 1 B of RAM.
2019-09-12 22:37:28 +02:00
07a0f527d8
Reset lcd_encoder_diff in lcd_show_fullscreen_message_yes_no_and_wait_P() also when it times out.
2019-09-12 20:30:27 +02:00
6630591f9e
Consume lcd_encoder_diff in lcd_show_fullscreen_message_yes_no_and_wait_P().
...
This fixes problem encountered in lcd_v2_calibration(). Selected menu item skips to another if returning to menu after this message is used.
2019-09-12 20:20:33 +02:00
d48197656c
Fix lcd_v2_calibration menu not redrawn after full screen message or question.
2019-09-12 20:05:16 +02:00
770e470fd5
Extract common code to function preheat_or_continue(). Saves 138B of FLASH memory.
2019-09-12 18:53:24 +02:00
d80b8280a0
Remove commented out and unused functions prototypes.
2019-09-12 18:41:17 +02:00
3a541488b2
Rename extr_unload_() to mmu_unload_filament() and move it to ultralcd.cpp as it is menu.
2019-09-12 18:40:02 +02:00
0cdfa7a5e8
Remove dead code.
2019-09-12 18:33:02 +02:00
e83b2ebe1f
Rename mFilamentMenu to lcd_generic_preheat_menu to match naming convention for global function and be more descriptive.
2019-09-12 18:15:15 +02:00
c26d7e50f7
Remove redundant lcd_update_enable(true) call.
2019-09-12 18:07:46 +02:00
6674cbf0d7
Select material / temperature before first layer calibration.
2019-09-12 17:54:05 +02:00
ae839aee31
Merge branch 'MK3' into MK3_Translations
2019-09-12 16:28:36 +03:00
6661d3aa45
Merge remote-tracking branch 'prusa3d/MK3' into MM_lay1_cal
2019-09-12 14:28:52 +02:00
521c5eb8ef
Merge pull request #2141 from mkbel/preheat_menu
...
Unify preheat menu, add ASA material
2019-09-12 14:25:38 +02:00
444daceca3
Move define as requested
2019-09-12 13:39:04 +03:00
78708903e8
Also update eeprom value
2019-09-12 07:16:31 +03:00
43705aae2e
Rename lay1cal_preheat() to lay1cal_wait_preheat().
2019-09-12 00:19:20 +02:00
ae3e6530e6
Do not ask for PLA filament in the beginning of first layer calibration. Do not ask if filament is present if it can be detected by IR sensor.
2019-09-12 00:14:24 +02:00
14dc6b86e0
Change undocumented behaviour of M190 (Wait for bed temperature). Document M190 and M109 (Wait for extruder temperature).
...
Do not remember CooldownNoWait property set by M190 and M109. If M190 was invoked without parameters, CooldownNoWait property was set if it was previously set by "M109 S" or "M109 S" or printer was after power up. Otherwise CooldownNoWait was not set. Now CooldownNoWait is never set if M190 is invoked without parameters.
Saves 44 B of FLASH memory.
2019-09-11 23:37:09 +02:00
acb0341a1f
Do not set temperature in lay1cal_preheat().
2019-09-11 22:42:40 +02:00
bf9f668574
Fix short filenames scrolling in sdprint menu and status screen
2019-09-11 22:04:48 +03:00
608aa6ff3c
Increase number of MMU load tries, so the same number of retries are done without cutter as before enabling cutter.
2019-09-10 18:49:23 +02:00
0fda4e5594
Merge branch 'cut_last_try' into enable_cutter
2019-09-10 18:37:09 +02:00
bb1fb49894
Use MMU cutter only as last resort. Cut filament only before last load retry.
2019-09-10 18:36:14 +02:00
5a1005e143
Merge pull request #2186 from DRracer/enable-fan-pin-test-MK3
...
Enable fan pin test even for MK3
2019-09-10 18:21:17 +02:00
d94356802c
Merge pull request #2187 from prusa3d/MK3_3.8.0
...
Mk3 3.8.0
2019-09-10 18:19:36 +02:00
e1e40213b2
Enable fan pin test even for MK3 (was disabled in 3.7.2 due to lack of
...
FLASH)
2019-09-10 16:49:22 +02:00
898e85e69f
Merge pull request #2038 from Eriobis/MK3
...
Add a threshold distance to Z calibration
2019-09-10 16:20:24 +02:00
76c062b980
Merge pull request #2169 from mkbel/format
...
Use same format for all instances where "ok" is send to serial line.
2019-09-10 14:14:47 +02:00
059c6b6cbf
Merge pull request #2148 from leptun/MK3_MK2.x_fix_Default_stepper_power
...
Mk3 mk2.x fix default stepper power
2019-09-10 14:13:51 +02:00
60de313b8a
Merge pull request #1759 from wavexx/enhanced_longpress
...
Default to "Live Adjust Z" when longpressing during a print (closes #1604 )
2019-09-10 14:13:00 +02:00
f6f8f5b3b6
Merge pull request #2171 from 3d-gussner/patch-3
...
Update reserved space bytes as mentioned in
2019-09-10 14:07:56 +02:00
90f85f7128
Merge pull request #2181 from leptun/MK3_fix_lcd_warning
...
Mk3 fix lcd warning
2019-09-10 14:07:28 +02:00
818befb91b
Fix compile warning
...
function was defined as static in lcd.cpp and redefined in lcd.h
2019-09-09 14:05:20 +03:00
2480bd90fc
Revert lcd_putchar to type int and retrun 0
...
Discussion: https://github.com/prusa3d/Prusa-Firmware/pull/2008#issuecomment-514500738
2019-09-09 13:59:20 +03:00
7cc9fe2e4f
Update 1_75mm_MK3S-EINSy10a-E3Dv6full.h
2019-09-09 02:20:39 +02:00
70de4d58f6
Update 1_75mm_MK3-EINSy10a-E3Dv6full.h
2019-09-09 02:20:14 +02:00
fb561b15ad
Update 1_75mm_MK25S-RAMBo13a-E3Dv6full.h
2019-09-09 02:19:52 +02:00
325e4a3403
Update 1_75mm_MK25S-RAMBo10a-E3Dv6full.h
2019-09-09 02:19:27 +02:00
0b50b2295c
Update 1_75mm_MK25-RAMBo13a-E3Dv6full.h
2019-09-09 02:18:54 +02:00
e581263bf1
Update 1_75mm_MK25-RAMBo10a-E3Dv6full.h
2019-09-09 02:18:22 +02:00
ca6937edaf
Update 1_75mm_MK2-RAMBo13a-E3Dv6full.h
2019-09-09 02:17:42 +02:00
a9a3d9d084
Update 1_75mm_MK2-RAMBo10a-E3Dv6full.h
2019-09-09 02:17:00 +02:00
978ace7fd7
Update Marlin_main.cpp
2019-09-09 02:16:06 +02:00
28c1486df2
Update Configuration.h
2019-09-09 02:14:10 +02:00
eec8e5f8c0
Version changed (3.8.0 build 2684)
2019-09-06 19:47:05 +02:00
d408fd2f42
Update reserved space bytes as mentioned in
...
https://github.com/prusa3d/Prusa-Firmware/pull/2170#pullrequestreview-284810840
2019-09-06 15:54:04 +02:00
3ba2197dd3
more space for the second lang
2019-09-06 08:37:59 +02:00
e73b0a88d5
Use same format for all instances where "ok" is send to serial line.
2019-09-05 22:35:01 +02:00
3a5daf1c64
Change default sheet names.
2019-09-05 17:27:21 +02:00
d51b3d6207
Added doxygen todos for missing LCD layout and positioning
2019-09-01 09:51:51 +02:00
339771a5fb
Fixed info screen when selected_sheet hasn't been initialized.
2019-08-31 21:27:08 -04:00
10cdcb3ae3
SD Scroll workaround
2019-08-31 17:00:39 +03:00
795b1d1cf7
Toggle Sound
2019-08-31 16:56:14 +03:00
2345288d40
Fix the LCD pause function
...
Do not call long_pause recursively!
long_pause() is called before resetting the lcd_command_type. As
long_pause uses st_synchronize() internally, there could be time to
schedule another call to long_pause().
2019-08-31 15:28:31 +02:00
3c4fffef60
Merge branch 'MK3' into MK3_Translations
2019-08-31 15:30:51 +03:00
a5a5f5cf0b
Toggle RPi port
...
Probably works, needs to be tested.
2019-08-31 15:25:00 +03:00
f69035323a
Toggle SD Settings
...
This includes FlashAir support and SD Sorting type
2019-08-31 14:55:51 +03:00
a821002f02
Toggle MMU Mode
2019-08-31 07:38:40 +03:00
d347a36509
Merge branch 'MK3' of https://github.com/prusa3d/Prusa-Firmware into MK3-2093-sheet-display
2019-08-30 19:17:27 -04:00
871e29621f
Fix "stuck" rename cursor
2019-08-30 19:14:22 -04:00
a789a8995f
Merge pull request #2145 from mkbel/fix_sheet_reset
...
Fix sheet reset
2019-08-30 16:49:34 +02:00
6a8330a43b
Toggle "HW Setup"*
...
All toggles from "HW Setup" were changed.
This includes:
-"Nozzle d."
-all "Checks"
Also added an option to provide a string from sram (not from progmem) as the toggle argument. This can be useful when toggling numbers or even when toggling sheets in the future.
2019-08-30 17:36:21 +03:00
865484590b
Change default sheet name from "<number>" to "Sheet <number>".
2019-08-30 16:11:41 +02:00
3d292350d4
Do not activate selected_sheet in lcd_v2_calibration() as this leads to calibrating random sheet if activated from calibration menu.
...
selected_sheet is initialized to 0 and contains index of last Sheet menu visited.
2019-08-30 14:45:25 +02:00
26423f98bc
Switch to next sheet if currently selected sheet is not initialized. Move next_initialized_sheet() and change_sheet_from_menu() to eeprom.cpp, rename it to eeprom_next_initialized_sheet() and eeprom_switch_to_next_sheet(). Rename default_sheet_name() to eeprom_default_sheet_name().
2019-08-30 12:24:13 +02:00
6c78c2fad5
Fix compiler warning.
2019-08-30 12:03:35 +02:00
90e5f14309
Fix compile error on MK3
2019-08-30 13:02:00 +03:00
50a8c16f27
Use EEPROM update instead of write.
2019-08-30 12:00:33 +02:00
56c949b9af
Fix typo
2019-08-30 12:14:43 +03:00
d8d0069f97
Fix MK2.x Default stepper power out of sync
2019-08-30 12:12:29 +03:00
b86a92a7d6
Toggle Mode (stepper power)
2019-08-30 07:59:58 +03:00
8df6691819
Relocate sheet menu, show sheet on info screen
...
-Sheet is shown instead of percentage done either if idle, or during
print preheat.
-Relocated sheet menu to below SD menu for additional visibility to
current sheet.
2019-08-29 18:07:24 -04:00
db6e2e0525
Toggle Crash det.
2019-08-29 22:31:30 +03:00
8c8619be05
Convert reset sheet sub menu to function.
2019-08-29 20:52:53 +02:00
abf84e36f5
Fix sheet menu back caption to Steel sheets to match parent menu caption.
2019-08-29 20:23:02 +02:00
d647cdc02c
Convert sheet switcher from sub menu to function. Handle null characters in sheet name.
2019-08-29 20:13:10 +02:00
cd7805ba46
Document
2019-08-29 18:26:24 +02:00
0b196da6fc
Migrate old vale of EEPROM_BABYSTEP_Z only if active sheet is not initialized.
2019-08-29 18:07:49 +02:00
32f435d1a0
Increase number of configurable steel sheets to 8. Move sheets into sub menu of HW setup.
2019-08-29 17:21:08 +02:00
7f51e0bad8
Move SpoolJoin and Cutter to MSGs
2019-08-29 17:35:26 +03:00
3413d5d486
Merge pull request #2139 from DRracer/assist-mode-fixes
...
Fix sound mode [assist]: encoder clicking indefinitely when MMU wants to
2019-08-29 15:55:49 +02:00
fec92b33ae
Merge pull request #2137 from DRracer/illegal-fat-characters-revised
...
Support for more special characters allowed in file names (^ + = [ ] ;
2019-08-29 15:55:36 +02:00
0b21acec46
Minor fix to Toggle Cutter
2019-08-29 15:49:26 +03:00
d0f9f10ed6
Toggle Cutter
2019-08-29 15:43:41 +03:00
1937cf2074
Toggle SpoolJoin
2019-08-29 15:40:04 +03:00
5eea8d26fe
Merge branch 'MK3' into MK3_Translations
2019-08-29 12:08:48 +03:00
f3bb72be64
Reset calibration status if there is no calibrated sheet after reset.
2019-08-29 03:33:33 +02:00
f64252b59b
Hide sheet switcher from main menu, if there are less than 2 sheets calibrated.
2019-08-28 19:08:53 +02:00
9692f94683
Move sheet menu up to be after Print from SD.
2019-08-28 19:01:48 +02:00
3903dc819a
Extract function next_initialized_sheet from change_sheet_from_menu(). Make it more general to depend on sizeof(Sheets::s) instead of hard coded value of 2.
2019-08-28 18:59:48 +02:00
33675c6d1e
Change default sheet names.
2019-08-28 18:16:35 +02:00
49bc11037c
Remove statements with no effect.
2019-08-28 18:14:10 +02:00
1d23cc52e9
endstop sound alert fixes
2019-08-28 09:39:28 +02:00
29c8cb2927
Fix bad merge.
2019-08-27 22:22:36 +02:00
3f04c4db87
Merge branch 'MK3' into preheat_menu
2019-08-27 22:20:23 +02:00
07169ad84a
Make file local variable static.
2019-08-27 20:48:53 +02:00
e57fcc04a7
Fix compiler warnings.
2019-08-27 20:23:48 +02:00
d927d5b05d
Port wizard_active to mFilamentItem().
2019-08-27 20:19:03 +02:00
cef7f31b9f
Set FilamentAction to None if mFilamentMenu left by cooldown or menu back action.
2019-08-27 20:13:55 +02:00
ffc5a64154
Remove commented out code.
2019-08-27 20:06:48 +02:00
269aef1696
Remove unused code guarded by WATCH_TEMP_PERIOD macro as most of the functionality is duplicate to what is implemented in temp_runaway_check(). This will release us from porting setWatch() to unified preheat menu and maintaining it.
2019-08-27 20:05:10 +02:00
1a1be5c518
Fix sound mode [assist]: encoder clicking indefinitely when MMU wants to
...
select filament
2019-08-27 17:10:29 +02:00
bf2097342d
Add ASA preheat into mFilamentMenu();
2019-08-27 17:01:41 +02:00
11ce786aaa
Support for more special characters allowed in file names (^ + = [ ] ;
...
,)
2019-08-27 13:47:58 +02:00
6aaa40b9a3
Merge pull request #2134 from mkbel/fix_power_panic
...
Fix repeated power panic restarted print from beginning or jumped at …
2019-08-27 08:13:26 +02:00
a1e68c3d7f
Merge pull request #2135 from prusa3d/MK3_3.8.0
...
Increase version to 3.8.0-RC2 and build number to 2639.
2019-08-27 08:12:27 +02:00
3da43ae8c2
Do not port print fan preheat speed preset, as it was never used. And it was broken until recently fixed when adding ASA profile.
2019-08-26 21:14:07 +02:00
4792559536
Add farm preheat items. Add setWatch() call.
2019-08-26 21:00:30 +02:00
aa13f9e809
Fix formatting.
2019-08-26 20:19:34 +02:00
668e89e5a9
Preheat menu: Add ASA, hide menu item back when in wizard.
2019-08-26 20:18:34 +02:00
52ae62bbba
Fix formatting.
2019-08-26 20:14:00 +02:00
3628d893ee
Remove duplicate preheat menu.
...
Known limitations: farm_mode missing, wizard_active missing, cooldown missing, ASA missing, print fan missing.
2019-08-26 20:11:52 +02:00
b9b0d6049e
Fix formatting.
2019-08-26 19:48:39 +02:00
159a1a70d8
Update documentation.
2019-08-26 17:19:57 +02:00
c27fcf9cff
Increase version to 3.8.0-RC2 and build number to 2639.
2019-08-26 17:03:18 +02:00
52cb37770b
Fix repeated power panic restarted print from beginning or jumped at most 65536 B back in file printed from SD card.
...
As sdpos_atomic was not updated after printer power up and first power panic recovery, it was equal 0. When the first command from SD card was queued its size on SD card was computed as current SD index position minus sdpos_atomic. This was equal to offset from beginning of the file limited to 16 bit storage type. When next power outage occurred earlier then this command was finished and wiped out of queue, this command size (extraordinarily big) was subtracted from sdpos_atomic and saved to EEPROM. This led to up to 65536 B jump back in file printed after next power panic recovery.
2019-08-23 19:30:20 +02:00
3eb36ca194
Fix cmdqueue_dump_to_serial.
...
Header was historically made bigger to contain size of the command on SD card, but those debug functions wasn't updated.
2019-08-23 16:48:30 +02:00
5bb510dd2a
Merge pull request #2129 from DRracer/bed-noise-performance
...
Improve performance of bed PWM automaton
2019-08-22 14:45:01 +02:00
c6df3fe012
Merge pull request #2127 from DRracer/code-size-reduction-1
...
Code size reduced by almost 5KB
2019-08-22 14:25:23 +02:00
d3123a74b0
Updated LCD menu documentation to new form/syntax
2019-08-22 04:58:16 +02:00
514b062107
Added `lcd_menu` format description
...
Added some documentation how the LCD menus look like and added max character values for translations.
There are more things needed and also the placement in the code is an open task. Depending on the decision if we use `messages.c/h`
2019-08-21 10:28:28 +02:00
a7c2aec04c
Code size reduced by almost 5KB
2019-08-21 09:59:51 +02:00
3ed6d0637c
Re-enable tmc2130_sg_stop_on_crash only if crash detection enabled from menu.
...
This fixes bug, that disabling crash detection from menu doesn't work during recovery from crash detection.
2019-08-20 19:32:39 +02:00
f204cdea81
Refactor
...
Remove variable CrashDetectMenu. Read this state from EEPROM_CRASH_DET instead in bool lcd_crash_detect_enabled().
Rename crashdet_enable() to lcd_crash_detect_enable() and move it to ultralcd.cpp.
Rename crashdet_disable() to lcd_crash_detect_disable() and move it to ultralcd.cpp.
Rename lcd_crash_mode_set() to crash_mode_switch().
Remove forward function declarations from *.cpp file.
Saves 34B of FLASH and 2B of RAM.
2019-08-20 17:22:27 +02:00
f07635d08a
Merge pull request #2116 from mkbel/fix_mmu_lay1cal
...
Fix mmu lay1cal
2019-08-19 19:07:10 +02:00
f0642f88f1
Fix power panic broken when PSU_Delta defined.
...
Remove disable_z() call from uvlo_() and uvlo_tiny() power panic interrupt handlers. As historically this function was empty. And in case PSU_Delta macro defined it switches Z trinamic to silent mode, which could take some time and is not needed. Remove alignment to to full step from disable_force_z(), as it is not needed when switching to silent mode.
2019-08-19 17:37:23 +02:00
0d22f8039e
Toggle FSENSOR and FSENSOR_AUTOLOAD
2019-08-19 11:58:16 +03:00
6e9c44af2d
Fix warning
2019-08-19 11:07:11 +03:00
5a3f14b752
"N/A" toggle support and format update
2019-08-19 10:20:17 +03:00
170c1ea866
Split first layer calibration load filament and intro line into separate steps. If load fails, pause print apparently flushes command buffer and intro line is not printed after issue is resolved.
2019-08-16 20:47:55 +02:00
e53734895f
Make MMU load failed blocking to workaround lack of resume print menu item.
...
The same workaround used as for USB print (Octoprint).
2019-08-16 20:20:17 +02:00
1036c4f755
Do not precede first layer calibration without filament if print is paused due to MMU load failed.
2019-08-16 19:00:45 +02:00
b10bd8340a
Make local functions static.
2019-08-15 17:57:30 +02:00
0b798767af
Fix preheat ASA.
2019-08-15 17:54:23 +02:00
a6f955b62d
Use unused macros *_PREHEAT_FAN_SPEED.
2019-08-15 17:47:34 +02:00
eb68bb9b43
Add ASA preheat.
2019-08-15 17:46:29 +02:00
36a69281ee
Remove unused functions forward declarations.
2019-08-15 17:36:05 +02:00
469ca6e184
Merge commit 'refs/tags/v3.8.0-RC1^{}' into enable_cutter
2019-08-15 14:48:28 +02:00
0e4e644476
Merge branch 'MK3' into MK3_3.8.0
2019-08-15 10:34:50 +02:00
ba81149afe
Merge branch 'MK3' into MK3_3.7.3
2019-08-15 10:25:51 +02:00
dc78bc7362
Improve performance of bed PWM automaton - proof of concept
...
There are still some artefacts on the output pin - work in progress.
2019-08-14 17:53:08 +02:00
32fa8caab8
reinitialize the timestamp to ensure enough time to receive response for 0xFF sent.
2019-08-11 17:57:41 -04:00
596ffe1dc2
Actual fix to the missing first two characters
2019-08-10 21:03:45 +03:00
7ce2fedac7
Fix missing first two characters in multi-lang mode
2019-08-10 09:16:23 +03:00
29dcb1cad3
Toggle FANS_CHECK
2019-08-10 08:43:07 +03:00
505deb28fd
Toggle menu item
2019-08-10 08:42:33 +03:00
720ea49fa3
Merge branch 'MK3' into MK3-fix-sdcard-sorting
2019-08-08 19:48:50 -04:00
4e58a112e8
Fix for Toshiba FlashAir (or other) SD card initialization - add clock cycles between sending CMD0 and CMD8. Redone for MK3 branch)
2019-08-08 15:45:59 -04:00
2ddbd606f2
Version changed (3.8.0 build 2608)
2019-08-08 16:44:16 +02:00
84cf1b83c3
Merge pull request #2083 from DRracer/viper
...
Workaround for the "viper" situation bug.
2019-08-07 17:48:57 +02:00
a28c365bb1
Merge pull request #2075 from MRprusa3d/PFW-873b
...
farm mode update, documentation correction
2019-08-07 17:48:30 +02:00
d9dec38815
Workaround for the "viper" situation bug.
2019-08-07 17:23:19 +02:00
7da2ee5fc3
Version changed (3.7.3 build 2370)
2019-08-06 15:37:23 +02:00
33037d369c
Prevent LCD long-press re-entry ( fixes #1196 )
2019-08-05 19:00:29 +02:00
b471bb7540
farm mode update, documentation correction
2019-08-05 17:51:26 +02:00
5cb86a7e8f
Merge pull request #2074 from kuhnmarek/MK3_PFW-967_filament_sensor_check
...
Fw version check disabled in farm mode
2019-08-05 17:41:16 +02:00
091cd49ca5
Fw version check disabled in farm mode
2019-08-05 16:59:09 +02:00
9f8590c572
Merge pull request #2072 from kuhnmarek/MK3_PFW-961_blind_sound
...
changed blind sound
2019-08-05 12:47:31 +02:00
f77414be2b
blind alert sound shorter
2019-08-05 12:41:27 +02:00
f1a947af2c
Whole hw settings hidden in farm mode
2019-08-05 10:40:21 +02:00
cb19f0958b
Use _delay() and _micros() for future compatibility
2019-08-05 09:51:06 +02:00
7cae064611
Update EEPROM_LAST_ITEM
2019-08-04 18:39:28 +02:00
18b8dc89e5
Merge remote-tracking branch 'upstream/MK3' into MK3_LA15
2019-08-04 17:06:34 +02:00
1435e4a68d
Use the computed direction in fsensor_st_block_begin
2019-08-04 16:53:48 +02:00
5f14e9c2e5
Removed sheet setting when in farm mode
2019-08-03 17:35:39 +02:00
15a095ea76
changed blind sound
2019-08-03 15:37:11 +02:00
7c9d3dd177
Update doxydoc of new G-codes
2019-08-01 13:09:20 +02:00
9214e30f74
Merge pull request #2062 from MRprusa3d/PFW-873
...
UI update
2019-08-01 07:20:09 +02:00
2cb977e4a0
UI update
2019-07-31 20:39:57 +02:00
e43e89421c
Merge pull request #2056 from BoCoKeith/patch-1
...
Correct bug in util.cpp is_whitespace_or_nl function.
2019-07-31 17:00:49 +02:00
49d2866b48
Add threshold distance to Z calibration
...
Add missing if statement
2019-07-30 19:43:07 -04:00
bca0fd81eb
Fix loading filament 255 instead of 0 in first layer calibration wizard.
2019-07-30 19:15:33 +02:00
0aed59c947
Fix unsigned char overflow cause invalid filament load.
2019-07-30 19:06:57 +02:00
9ff1f6c3ee
Re-enable Tone
2019-07-30 16:05:40 +03:00
5fdaead663
Fix language related warnings in LANG_MODE 0
2019-07-29 15:55:42 +03:00
556b87edec
M350 for all axis - MK3
2019-07-29 09:41:33 +03:00
952a24b45d
Update util.cpp
...
Correct "is_whitespace_or_nl": change 'r' to '\r'.
2019-07-28 19:40:18 -06:00
3ddb853bbd
Fix shifted languages. Use \n and \x0a
2019-07-26 18:53:08 +03:00
0687b8e4a2
Merge pull request #2044 from mkbel/fix_missing_mmu_attention
...
Fix missing mmu attention
2019-07-26 09:07:06 +02:00
3b396fb8bf
Merge branch 'MK3' into fix_missing_mmu_attention
2019-07-25 19:10:07 +02:00
a9e9a9857b
Fix "MMU needs attention screen is missing in case of failed unload filament".
2019-07-25 19:09:52 +02:00
3438c0e411
Merge pull request #2042 from NotaRobotexe/octoprint_bugs
...
fixed redundant OK messages in serial
2019-07-25 12:41:43 +02:00
2820baf016
Merge pull request #2040 from NotaRobotexe/MK3
...
multiple sheets - menu switching bug
2019-07-25 09:56:07 +02:00
64115fb146
fixed redundant OK messages in serial
2019-07-24 18:08:14 +02:00
5021fadd5d
multiple sheets - menu switching bug
2019-07-24 11:20:27 +02:00
33195baf9d
Merge pull request #2035 from mkbel/enable_lin_corr
...
Re-enable linearity correction for MK3.
2019-07-24 09:08:43 +02:00
851aaac053
Merge branch 'MK3' of https://github.com/NotaRobotexe/Prusa-Firmware into MK3
2019-07-23 19:29:36 +02:00
fb35009628
multiple sheets,fix of bug in switching sheets from menu
2019-07-23 19:25:59 +02:00
f9e32c4bf4
Re-enable linearity correction for MK3.
2019-07-23 19:22:54 +02:00
3e60cf4537
enable only for MK3S (out of FLASH on the MK3)
2019-07-23 16:51:02 +02:00
593675c667
delay, micros for the 3.7.x branch
2019-07-23 16:40:21 +02:00
6860a572c2
detection of faulty RAMBo (incorrect capacitor on fan tach pin) for MK3/S
2019-07-23 15:55:53 +02:00
c4d5e332c8
Merge branch 'MK3' into MK3
2019-07-23 11:34:42 +02:00
b9f622f8a6
variables to PROGMEM, text formating
2019-07-23 11:31:20 +02:00
b5129ff2ec
Revert "force push"
...
This reverts commit 19e7838c20
2019-07-23 11:12:53 +02:00
19e7838c20
add default names to PROGMEM, text formating edit
2019-07-22 20:35:10 +02:00
ab2eafe175
sheet menu, add hw setting, sheet change in menu, sheet name initialization in eeprom
2019-07-22 18:43:43 +02:00
6f79ef4c9c
resolve hidden conflicts in commented code
2019-07-22 17:29:43 +02:00
65087b89ee
Merge remote-tracking branch 'upstream/MK3' into code_size_optimization
...
and resolve conflicts (ultralcd.cpp)
2019-07-22 17:26:14 +02:00
b96c9700ce
fix prusa_statistics code size optimization according to unit test
...
results
2019-07-22 17:10:04 +02:00
79c326cdaa
Merge pull request #2022 from kuhnmarek/gcodes_doxygen
...
Updated doxygen docs to work better with confluence.
2019-07-22 12:52:27 +02:00
9c95f8c015
sheet menu
2019-07-19 18:34:46 +02:00
bd4bfbe586
Added M862 details
2019-07-19 16:15:12 +02:00
94e79806bc
Updated doxygen docs to work better with confluence.
2019-07-19 13:51:55 +02:00
03e80ce4a8
PFW-917 Adjust Z value persists across update to v3.8
2019-07-18 16:50:44 +02:00
b0c41ec979
Merge pull request #2017 from NotaRobotexe/octoprint_fix
...
Octoprint fix
2019-07-18 16:02:38 +02:00
14b39b0094
Merge pull request #2019 from leptun/MK3_fix_LCD_WDT_RESET
...
Fix lcd not initing after WDT reset
2019-07-18 13:27:32 +02:00
121e60655a
Fix lcd not initing after WDT reset
2019-07-18 11:50:18 +03:00
1ae072c332
Merge pull request #2014 from NotaRobotexe/sound_fix
...
crash and filament unload sound change
2019-07-18 09:41:05 +02:00
090ea3145d
Merge pull request #2015 from NotaRobotexe/text_edits
...
small text edit
2019-07-18 09:39:28 +02:00
756ce51b5e
Merge branch 'MK3' into octoprint_fix
2019-07-17 20:06:06 +02:00
b8fec59f21
octoprint fan error fix
2019-07-17 19:59:31 +02:00
2bae208133
Merge pull request #2011 from MRprusa3d/PFW-873
...
GUI updates
2019-07-17 14:49:07 +02:00
1c44eddf81
crash and filament unload sound change
2019-07-17 12:32:27 +02:00
255db28684
merge unit test and upstream changes
2019-07-17 10:30:49 +02:00
eb705b6b17
Merge pull request #2012 from leptun/MK3_LCD_improvements
...
LCD fix status screen lcd_putchar
2019-07-17 08:05:56 +02:00
3a87ff56f6
Default to "Move Z" above a certain height even when printing
...
This speeds-up the ability to manually get the carriage out of the way
just after a print has finished
2019-07-16 22:04:32 +02:00
d8ecb2d0c9
Fix status screen
2019-07-16 21:11:27 +03:00
034cbff10a
GUI updates
2019-07-16 20:10:49 +02:00
0c660a6fb1
Revert "Fix sketch/lcd.cpp:196:1: warning: no return statement in function returning non-void [-Wreturn-type]."
...
This reverts commit a54fd29fa4
2019-07-16 21:10:11 +03:00
e6255e8451
octoprint fan error work
2019-07-16 19:18:31 +02:00
1dab0f7a04
Merge pull request #2008 from leptun/MK3_LCD_improvements
...
Lcd optimization - 1K of flash saved
2019-07-16 19:15:57 +02:00
a54fd29fa4
Fix sketch/lcd.cpp:196:1: warning: no return statement in function returning non-void [-Wreturn-type].
2019-07-16 20:02:01 +03:00
fecccf50e5
Remove duplicate prototypes from ultralcd.h. Make functions unreferenced outside lcd.cpp static. Disable unused functions by preprocessor to suppress warnings.
2019-07-16 20:01:49 +03:00
3e292fd6b0
Fix compiler warnings:
...
sketch/Marlin.h:178:17: warning: extra tokens at end of #undef directive
sketch/Marlin.h:181:24: warning: extra tokens at end of #undef directive
sketch/Marlin.h:182:0: warning: "enable_z" redefined
2019-07-16 18:16:28 +02:00
cee875fc6a
Fix compiler warnings:
...
warning: enumeration value '_None' not handled in switch [-Wswitch]
warning: enumeration value '_Undef' not handled in switch [-Wswitch]
2019-07-16 17:40:28 +02:00
6b8a5bc3ac
Fix compiler warnings
...
sketch/tmc2130.cpp:146:42: warning: default argument given for parameter 1 of 'void tmc2130_init(bool)' [-fpermissive]
sketch/tmc2130.cpp:146:24: warning: unused parameter 'bSupressFlag' [-Wunused-parameter]
2019-07-16 17:31:56 +02:00
8b806f692e
Merge pull request #1664 from MRprusa3d/PFW-811
...
"disable_z()" for Delta PSU
2019-07-16 16:46:34 +02:00
d65b333664
Merge pull request #2003 from mkbel/heat_hysteresis
...
Heat hysteresis
2019-07-16 13:10:47 +02:00
0422713b29
Merge pull request #2005 from prusa3d/MK3_3.7.2
...
Mk3 3.7.2
2019-07-16 08:50:38 +02:00
8b1c687629
Lcd optimization - 1K of flash saved
2019-07-15 20:32:58 +03:00
f0727214ed
Document
2019-07-15 19:15:15 +02:00
9083d151b2
wait_for_heater() in restore_print_from_ram_and_continue() only if saved_extruder_temperature differs from target hot-end temperature.
...
This fixes problem, that restore_print_from_ram_and_continue() blocked for heating for at least TEMP_RESIDENCY_TIME (3 seconds) even if temperature was resumed by M600 command.
2019-07-15 18:07:05 +02:00
ab4e789688
Partially revert "aeed49a Fix filament runout on optical filament sensors"
...
Revert plan move to filament change position before enqued M600.
This was workaround to problem that restore_print_from_ram_and_continue() did 3s heating pause before resuming print. This problem will be fixed properly in restore_print_from_ram_and_continue() in next commit.
Save 166B of FLASH.
2019-07-15 17:22:39 +02:00
549a8a1a6b
Restore print fan speed earlier then nozzle temperature.
...
Avoids nozzle temperature dip when fan is turned on.
2019-07-15 16:25:21 +02:00
8fb30f886a
octoprint stop fix
2019-07-15 14:30:21 +02:00
759d9f5a2e
small text edits
2019-07-15 11:41:16 +02:00
a3fde091ab
More than 7.5KB saved by slight refactoring of printing to serial line
2019-07-12 10:10:56 +02:00
38ff944b03
Reorder EEPROM items to allow possible future grow for Sheets struct.
2019-07-10 21:03:30 +02:00
8985d2e26c
Fix fix EEPROM conflict.
2019-07-10 18:50:16 +02:00
6ed146c37c
Fix EEPROM conflict.
2019-07-10 18:41:12 +02:00
b8b167d1ca
Merge branch 'MK3' into MK3_Enable_fan_waiting_cooldown
2019-07-10 19:26:43 +03:00
d3dd0ad271
Merge pull request #1952 from NotaRobotexe/sound
...
new sound
2019-07-10 18:06:32 +02:00
333ade9aee
Remove non-existing function prototype.
2019-07-10 17:59:04 +02:00
7189f44bcd
Remove commented out defines.
2019-07-10 17:40:33 +02:00
e0f46f128d
Fix indentation.
2019-07-10 17:39:24 +02:00
4e7de776cd
Disable TMC2130 linarity correction for MK3 to save FLASH to enable compilation. Add symlink /Firmware/variants/printers.h to .gitignore.
2019-07-10 17:07:00 +02:00
98bae7af9f
Merge branch 'MK3' into PFW-873
2019-07-10 16:50:14 +02:00
3333d937ed
some improvements
2019-07-10 16:29:40 +02:00
9585789288
Merge pull request #1976 from NotaRobotexe/MK3_3.7.2_PP
...
dont fire power panic at normal power off
2019-07-10 14:19:00 +02:00
4e3bf276ec
Merge pull request #1984 from leptun/MK3_compile_error_fix_multiple_sheets_Windows
...
Fix compile error on Windows when multiple_sheets is merged
2019-07-09 19:28:35 +02:00
712fb1cceb
#undef EEPROM_SHEETS_BASE so this internal define for compile-time checking only is not used outside of eeprom.h
2019-07-09 19:19:59 +02:00
fcfc9ca95c
Merge pull request #1979 from DRracer/heatbed_noise_suppression
...
Heatbed noise suppression
2019-07-09 18:33:27 +02:00
dbc603d5f6
Fix compile error on windows
...
addresses issue #1965
2019-07-09 18:38:24 +03:00
898f6d9d8b
Fix EEPROM_Sheets_base overlay of EEPROM_NOZZLE_DIAMETER_uM.
2019-07-09 13:41:18 +02:00
cd1ea0a655
Move function declaration and structs declarations to top of eeprom.h file.
2019-07-09 13:38:58 +02:00
4d535f1217
... incl. SupportMenu ;-P
2019-07-09 12:31:20 +02:00
8229a45187
pre-production version ;-)
2019-07-09 12:16:51 +02:00
61566f7fb1
Move translated string MSG_V2_CALIBRATION from untranslated section to PROGMEM_I1, add missing ISTR macro. Revert _T(MSG_SELECT) and _T(MSG_RENAME) to _i("Select") and _i("Rename") as it is preferred macro for internationalized strings. Use MSG_V2_CALIBRATION in both occurrences.
2019-07-08 21:18:55 +02:00
a16de83535
heatbed audible noise suppression using short fast PWM pulses with
...
variable duty
2019-07-08 16:42:21 +02:00
9592460281
add old delay
2019-07-04 18:43:59 +02:00
a1a8945bee
more code editing
2019-07-04 15:31:44 +02:00
1f9dce9513
next almost 200B down
2019-07-04 13:36:02 +02:00
e77898d5dc
code edit
2019-07-04 13:21:27 +02:00
81b3b71cca
check eeprom inicialization
2019-07-03 19:37:11 +02:00
4db4f19128
'variant files' update ;-(((
2019-07-03 18:14:48 +02:00
7e3cb98a1f
& MK3S
2019-07-03 17:50:41 +02:00
a3a7f3106e
print parameters checking
2019-07-03 17:21:11 +02:00
ff3c9d1a7c
dont fire power panic at normal power off
2019-06-28 11:25:56 +02:00
a59e7090ea
Increase version.
2019-06-27 17:32:40 +02:00
b6bcb901f3
Correct initialization of eISR_Err
...
Further tweak the initial term to improve the linearity of the resulting
speed after BW filtering.
2019-06-27 13:21:39 +02:00
d344e514c4
Rename functions and macro to match with naming convention - remove 'P' where there is no pointer to progmem.
2019-06-26 15:51:58 +02:00
d879794922
Remove first parameter of macro menu_format_sheet_P_E, of function menu_format_sheet_P_E and menu_item_submenu_P as it was always called with the same parameter. Saves 66B of FLASH.
2019-06-26 15:47:06 +02:00
53dbcdd852
Display sheet name when adjusting Z. Costs 130B of flash.
2019-06-26 15:33:54 +02:00
4a16fe6902
Save z_offset, bed_temp and pinda_temp with sheet calibration.
2019-06-26 14:10:12 +02:00
20dd1110f6
Remove unused parameters of function _lcd_babystep(int axis, chonst char *msg).
...
Saves 24B of flash memory.
2019-06-25 19:43:10 +02:00
ebdeb99134
Add menu to show sheet live adjust Z value.
2019-06-25 18:55:25 +02:00
4058cd144b
add delay_keep_alive without updating lcd
2019-06-25 14:30:11 +02:00
3e9dc91cef
ifdef for mk2
2019-06-24 18:01:49 +02:00
b5168bd6c2
fan error fix
2019-06-24 17:30:56 +02:00
b67ec501b4
Add rename sheet menu.
2019-06-24 17:11:13 +02:00
e6fbac08ed
Move sheet selector to submenu.
2019-06-21 15:44:56 +02:00
19a474eaa5
Fix compiler warnings.
2019-06-20 18:00:29 +02:00
0a48082609
Add steel sheet profile selector.
2019-06-20 16:40:53 +02:00
9a904362e5
code only for TMC2130
2019-06-20 10:17:48 +02:00
e54497d802
added new function belt test under calibration menu
2019-06-20 00:09:55 +02:00
89b578c899
Merge branch 'MK3' into multiple_sheets
2019-06-19 18:40:09 +02:00
524121141a
Remove commented out code. This code is of unknown genesis and purpose. It was added in commit "3.0.10 sync" two years ago and it was already commented out in that moment.
2019-06-19 15:54:24 +02:00
6a272d83b1
Add compile time check for EEPROM stored varibles size.
2019-06-19 15:09:07 +02:00
2e073527fb
Also avoid E direction inversions while coasting
2019-06-19 14:28:04 +02:00
64903e0ae8
Remove unused defines.
2019-06-19 14:27:02 +02:00
4b3af0d2df
Respect minimum direction change delay
2019-06-19 13:22:44 +02:00
181c42fa62
Merge remote-tracking branch 'prusa3d/MK3' into enable_cutter
2019-06-18 20:03:41 +02:00
8b6629ad58
Fix comment grammar.
2019-06-18 20:00:02 +02:00
ae9ae95187
MMU: Filter IR sensor signal when detecting whether filament tip passes to heat break. Increase number of tries when loading filament to 3.
2019-06-18 19:15:16 +02:00
6cb85a455f
Update mmu.cpp
2019-06-18 15:08:47 +02:00
24cec4091b
Merge branch 'MK3' into sound
2019-06-17 17:28:19 +02:00
aff020a6d4
Merge pull request #1897 from NotaRobotexe/farm_mode
...
PFW-571 send PRN:4 instead PRN:1, PFW-874 new firmware version alert with 30s timeout
2019-06-14 20:05:30 +02:00
b1df1fb1f1
Fix formatting. We are never using 2 space indentation. 4 spaces are preferred, tabulator is acceptable if surrounding code uses tabs.
2019-06-14 18:18:27 +02:00
367a28a5a8
Default to "Live Adjust Z" when longpressing during a print ( closes #1604 )
...
- Disable longpress action when homing or calibrating
- Default to Live Adjust during a print
- Retain "Move Z" otherwise
2019-06-14 11:44:06 +02:00
d81970dd3d
Merge branch 'MK3' into MK3_Enable_fan_waiting_cooldown
2019-06-14 11:07:08 +03:00
c5d130e763
Merge pull request #1914 from prusa3d/MK3_3.7.2
...
Increase version.
2019-06-14 09:39:41 +02:00
fee67d9451
Increase version.
2019-06-13 16:37:51 +02:00
6717590631
Merge branch 'MK3' into MK3_LA15
2019-06-13 15:39:50 +02:00
55dc78546b
Merge pull request #1913 from mkbel/fix_spelling
...
Fix spelling.
2019-06-13 15:12:30 +02:00
25f0eb9a39
Fix spelling.
2019-06-13 15:01:54 +02:00
72f5e87c61
Merge branch 'MK3' into use_enum_class_2
2019-06-12 19:17:35 +02:00
1390d4e5b9
Use first letter capital camel case for enum class members. Change underlying type to uint_least8_t.
2019-06-12 19:11:41 +02:00
5fcf760954
Use first letter capital camel case for enum class members. Rename CustomMsgTypes to CustomMsg. Remove unnecessary maping to numbers. Change underlying type to uint_least8_t.
2019-06-12 18:54:43 +02:00
51df6cdfdc
Remove LcdCommands::Unknown3. Remove LcdCommands mapping to numbers, as it is not needed.
2019-06-12 18:54:37 +02:00
cbb92860d0
Use first letter capital camel case for enum class members.
2019-06-12 18:54:32 +02:00
0401490cc1
Use first letter capital camel case for enum class members.
2019-06-12 18:54:25 +02:00
9ceba00426
Use first letter capital camel case for enum class members. Remove dependency of FanCheck values on TestError values as it is not used.
2019-06-12 18:53:09 +02:00
b7d3766ae2
Merge branch 'MK3' into PFW-790
2019-06-12 17:32:13 +02:00
6dd085bcc5
Use first letter capital camel case for enum class members.
2019-06-12 16:44:07 +02:00
e393d91b12
Use first letter capital camel case for enum class members.
2019-06-12 16:20:21 +02:00
cc80bfa020
Merge branch 'MK3' into use_enum_class
2019-06-12 16:04:26 +02:00
c7e1e73880
another almost 200B down by proper usage of smaller data types and enum
...
classes
2019-06-12 15:41:55 +02:00
94a5175980
Code size reduction - saved almost 2KB
2019-06-12 15:41:34 +02:00
8d388fa03a
Merge pull request #1911 from mkbel/layer1_cal_flash
...
Layer1 cal flash
2019-06-12 15:40:59 +02:00
49f172a7b9
Convert uint8_t cycle control varibles changed in previous commit to uint_least8_t to be potentially more portable.
2019-06-12 15:01:57 +02:00
b15bbaf177
for cycles' variables: int -> uint8_t where appropriate, part1
2019-06-12 14:58:15 +02:00
7ac098a135
Refactor. Put constants needed in functions inside fuctions to limit its scope.
2019-06-12 14:20:20 +02:00
2755a3733d
Document.
2019-06-12 14:15:58 +02:00
342954b88c
Refactor. Make constants producing first layer calibration square more clear. Note layer height discrepancy.
2019-06-12 13:31:17 +02:00
4f8ed7f123
for cycles' variables: int -> uint8_t where appropriate, part1
2019-06-12 10:31:09 +02:00
baa36ce740
another almost 200B down by proper usage of smaller data types and enum
...
classes
2019-06-12 09:58:42 +02:00
d528a53526
Refactor. Move lcd_commands_func1() to first_lay_cal.cpp and rename it to lay1cal_square(). Remove its constant parameters. Move remaining G1 code to lay1cal_meander(). Saves 6B of FLASH memory.
2019-06-12 01:36:48 +02:00
60cc3d58ec
Use sprintf_P in first layer calibration. Save 30B of FLASH memory.
2019-06-11 20:00:49 +02:00
47a183e96e
Use loop to enquecommand_P() in first layer calibration. Save 126B of FLASH memory.
2019-06-11 19:49:56 +02:00
21f4669600
Make count_e() constexpr.
2019-06-11 19:22:08 +02:00
4effff9e99
Use loop to enquecommand_P() in first layer calibration. Save 10B FLASH memory.
2019-06-11 18:56:29 +02:00
d21f256cd0
Remove duplicate calls of lcd_timeoutToStatus.start(), move !blocks_queued() && cmd_buffer_empty() condition to outer if, rewrite using switch statement. Save 487B of FLASH memory.
2019-06-11 18:26:59 +02:00
97a5d6b5f4
Make constants const.
2019-06-11 17:30:37 +02:00
9b1e3213ae
Variable lcd_commands_step doesn't need to be global.
2019-06-11 17:30:19 +02:00
58948cffcd
Code size reduction - saved almost 2KB
2019-06-11 17:23:01 +02:00
0c9121e99e
Use loop to enquecommand_P() in first layer calibration.
2019-06-11 17:08:56 +02:00
f20125a3e2
Code size reduction - saved almost 2KB
2019-06-11 16:24:40 +02:00
cb6a3e7e12
Merge pull request #1907 from DRracer/fan_check_error_fix
...
Do not allow resume printing if fans are still not ok
2019-06-11 15:12:48 +02:00
13c3ab14fa
test fan check error only when enabled by #ifdef
2019-06-11 15:05:40 +02:00
3e37150552
Do not allow resume printing if fans are still not ok
2019-06-11 14:53:10 +02:00
27145204ed
Use internationalized M117, but anyway the text is not shown.
2019-06-10 21:40:12 +02:00
4be8fa701e
Use loop to enquecommand_P() in first layer calibration.
2019-06-10 20:41:18 +02:00
c40e3b550d
Remove stubs and live K by default
2019-06-10 19:34:00 +02:00
bb980e2fca
sound edit, delete mute mode, add blind mode
2019-06-10 15:03:52 +02:00
28e7772421
Merge pull request #1886 from leptun/MK3_fix_load_filament_5
...
Fix Load Filament 5 for MMU2
2019-06-10 14:45:55 +02:00
327e6cd39b
Merge pull request #1889 from DRracer/fan_check_error_fix
...
Fan check error fix
2019-06-06 15:52:44 +02:00
0cf6bc0677
Merge pull request #1903 from mkbel/filament_runout_mk3_2
...
Filament runout mk3 2
2019-06-06 15:51:35 +02:00
83578c3389
documentation + minor code cleanup based on code review
2019-06-06 15:50:13 +02:00
a4bc91ed2f
M0/M1/M117 fix: Use CUSTOM_MSG states in M0/1/M117
...
Now that we have the new CUSTOM_MSG states, we can use them in the M0/M1
and M117 handlers to force the user message to be displayed even when
the printer is printing from a SD card and displaying a file name.
2019-06-06 14:25:36 +02:00
5494f23942
M0/M1/M117 fix: Add new CUSTOM_MSG states.
...
When the printer prints from a SD card, the display of progress messages
and filename takes precedence over CUSTOM_MSG_TYPE_STATUS messages used
by M0/M1/M117. Let's introduce two new CUSTOM_MSG states, one that
overrides the SD status while waiting in M0/M1 (M0WAIT) and one that
ensures the message will be displayed in at least one screen update
(MSGUPD).
2019-06-06 14:25:06 +02:00
5d8eb84965
M0/M1/M117 fix: Move M0/M1 to the top of decoder.
...
Move M0/M1 decoding before any other command. The M0/M1 message can contain
arbitrary characters and so it also can contain substrings that other
decoders trigger on, like the letter 'G'. Any such substring would cause
misdecoding of the M0/M1 and unpredictable behavior in addition to not
making the printer stop.
M117 already received the same treatment in the past, so we take the same
approach for M0/M1.
2019-06-06 14:24:34 +02:00
0239f4bce1
Update/compute advance steps inside calculate_trapezoid_for_block
...
Do not store the block e_D ratio, store directly the computed
compression factor so that we can recompute the advance steps
quickly and update them in sync with the acceleration rates.
2019-06-05 20:25:26 +02:00
048628083a
Remove clear_current_adv_vars()
...
The pressure state is already reset implicitly at the end of each block,
meaning an extruder switch will never have to reset the internal state
anyway.
We clear the internal backpressure in the following conditions:
- when switching to a non-LA block
- when quickStop is called
- when the scheduler is idling (losing pressure)
2019-06-05 20:25:19 +02:00
7d33089d9a
Remove use_advance_lead
...
The per-step state is kept implicitly using nextAdvanceISR,
while the current pressure is decoupled anyway.
2019-06-05 20:25:12 +02:00
dc436b71fe
Fix position_float after a quickStop condition
2019-06-05 20:25:05 +02:00
fa454f61e4
Drop unused "speed_lookup_table.h" from planner.cpp
2019-06-05 20:24:58 +02:00
1d8c24e8a9
"disable_z()" for Delta PSU IV
...
correction for (motor) mode switching
2019-06-05 19:22:04 +02:00
19351df8a7
Extracted computation of z_shift for M600 into a separate function to
...
improve readability. Surprisingly, also the code got shorter.
2019-06-05 18:34:26 +02:00
9c3bb14bae
remove function forward decl: fsensor_restore_print_and_continue_IR
...
revert LCD_BL_PIN change
2019-06-05 18:34:10 +02:00
aeed49a80e
Fix filament runout on optical filament sensors
...
Reworked the IR variant accordingly
Some code-size optimization in related functions
2019-06-05 18:33:41 +02:00
10247a28a3
Merge pull request #1896 from NotaRobotexe/power_panic
...
documentation for power panic
2019-06-05 16:10:04 +02:00
0cab2284ea
PFW-874 new firmware alert timeout
2019-06-05 15:48:10 +02:00
14270ac1f6
power panic documentation
2019-06-05 15:10:51 +02:00
d263728c37
documentation
2019-06-05 14:55:59 +02:00
33b2aa5e58
Merge pull request #1894 from NotaRobotexe/power_panic
...
Power panic Z axis fix
2019-06-05 13:34:21 +02:00
2c4e98dc27
power panic improvement
2019-06-05 13:12:08 +02:00
cda9ed4a1d
Reset LA state more carefully during stop conditions
2019-06-04 16:22:40 +02:00
1bed8cfa94
Don't call fsensor_st_next_block repeatedly during the last step
...
Rely on st_block_begin to perform a single call instead of calling
block_chunk for each advance tick in the last step
2019-06-04 16:22:33 +02:00
8ce1c04740
Remove useless "extruder under pressure" flag
...
That's exactly what LA does
2019-06-04 16:22:27 +02:00
bca5618145
Save/restore K during a power panic
2019-06-03 17:33:19 +02:00
84009e1e8e
Do a full fsensor_update() when initializing the sensor
...
This correctly populates the "extruder info" details even when
the menu is entered for the first time after starting a print.
2019-06-03 17:32:57 +02:00
fa7c0fb2c9
Avoid triggering LA during a Z-priming move
...
When recovering from a pause, the nozzle is often primed while
being lowered. If LA is triggered under such a move, the pressure
advance will be wasted.
2019-06-03 17:32:51 +02:00
d2432056bd
Elide fsensor_st_block_begin, saving some cycles/bytes
2019-06-03 17:32:43 +02:00
5985c0608e
Revert changes to pins_Einsy_1_0.h not related to the fan check error
...
fix
2019-06-03 09:02:27 +02:00
5cd0177389
Cleanup fsensor_st_block_begin
2019-06-02 18:17:59 +02:00
b4bf79297f
Remove unneeded includes from fsensor
2019-06-02 01:08:03 +02:00
c50b1c0351
Rework the filament counter logic
...
- Move direction checks out of fsensor: fsensor_counter is now
always in the same direction as e_steps
- Check the filament chunk after e_steps have been physically done,
using the real e_step count so far
2019-06-01 22:08:00 +02:00
09fee4e64d
remove fan error simulation automaton
2019-05-31 11:30:30 +02:00
6755791778
Fix repeated fan error checking
2019-05-31 11:29:11 +02:00
adb5baa12b
Merge remote-tracking branch 'upstream/MK3' into MK3
2019-05-31 11:05:24 +02:00
ebfad55617
Merge pull request #1888 from mkbel/always_cut_independent
...
Always cut independent
2019-05-31 07:00:37 +02:00
00da4640e2
Document.
2019-05-30 23:29:33 +02:00
e79c203c96
Do not always cut if it is not enabled from menu.
2019-05-30 23:04:06 +02:00
ccb649b1f6
Add always cut experimental / for testing feature.
2019-05-30 23:03:59 +02:00
18122049a6
Fix cut filament menu item labels.
2019-05-30 19:36:10 +02:00
878e866401
Fix Load Filament 5 for MMU2
2019-05-30 17:28:02 +03:00
e9c870e7a0
fix of fixof power panic
2019-05-29 20:33:22 +02:00
3b2cbc68d8
PFW-571 send PRN:4 instead PRN:1 while changing filament
2019-05-28 18:22:34 +02:00
1c619133a3
Merge pull request #1880 from NotaRobotexe/power_panic
...
PFW-828 add uvlo tiny z positio back
2019-05-28 14:29:13 +02:00
bcb6129c29
delete comment
2019-05-28 14:11:38 +02:00
8842d16832
add back uvlo tiny z positio
2019-05-28 13:50:21 +02:00
326c061d8c
testing pin 5
2019-05-27 18:27:24 +02:00
2f96badef4
Merge pull request #1870 from NotaRobotexe/power_panic
...
PFW-828 after power panic printer start print in the air
2019-05-27 17:13:08 +02:00
9c3b93f900
Merge pull request #1869 from DRracer/fix_mintemp_and_fsensor
...
Fix MINTEMP errors and fsensor runout
2019-05-27 16:32:22 +02:00
253087a4c5
Code cleanup
2019-05-27 16:18:21 +02:00
4d020d99f6
Code cleanup
2019-05-27 14:57:02 +02:00
51d6904dad
Multiply the step rate when grouping advance steps
2019-05-27 14:44:09 +02:00
f070a10904
edit
2019-05-27 10:10:24 +02:00
a742afcebd
Remove version check
2019-05-26 22:43:06 +02:00
4772532524
Allow Live-K to be used on stock 3.7.1 using a stub
2019-05-26 22:14:31 +02:00
47d2562510
Typos
2019-05-26 21:06:29 +02:00
823f7b069c
Fix filament sensor direction again
2019-05-26 21:06:22 +02:00
9d834925c0
Recalculate LA_phase correctly
2019-05-26 17:06:21 +02:00
3abb2188df
Fixup initial error by defect
2019-05-26 16:59:45 +02:00
ab478ec281
Save another 144b by avoiding a calc_timer copy
2019-05-26 16:42:03 +02:00
20694aeabc
Save 316 bytes by avoiding advance_spread copies
2019-05-26 16:41:56 +02:00
a28fb65bb2
Optimize advance_spread further
2019-05-26 16:41:50 +02:00
daa8007de5
Allow to exclude Live K from the build
2019-05-26 16:41:45 +02:00
6f6cef65b5
Revert "Correctly handle direction for the filament sensor"
...
This reverts commit aae03ad83e
2019-05-26 16:41:37 +02:00
bddc3e84ab
Use WRITE_NC directly in the isr
2019-05-25 21:52:06 +02:00
aae03ad83e
Correctly handle direction for the filament sensor
2019-05-25 21:51:59 +02:00
935a798236
Speedup advance_spread for common divisors
2019-05-25 21:51:52 +02:00
fa7ecfc38e
Check for serial roughtly in the middle of the stepper isr
2019-05-25 18:41:28 +02:00
0a26de1e7f
Allow to live-tune K during a print
2019-05-25 18:41:21 +02:00
55a2d588f1
PFW-828 printing in the air after power panic
2019-05-24 18:30:58 +02:00
69455bfc75
PFW-828 fix printing in the air after power panic
2019-05-24 18:28:16 +02:00
282b502393
Improve the distribution of the advance steps
2019-05-24 17:08:32 +02:00
294bf4068d
Improve debug messages
2019-05-24 17:08:32 +02:00
53b77bab36
Do not operate on the prev block when already in use
2019-05-24 17:08:32 +02:00
aae5cce28f
Use the nominal frequency to merge ticks
2019-05-24 17:08:32 +02:00
c6dbcc494f
Typo
2019-05-24 17:08:32 +02:00
942c38c18b
Minor reformatting
2019-05-24 17:08:32 +02:00
9586d71adb
Mention LA_DEBUG_LOGIC
2019-05-24 17:08:32 +02:00
a1be8b6784
Initialize current_adv_steps correctly
...
Initialize at 0 both on startup and on reset on regular (non-LA)
segments to avoid cumulating errors.
2019-05-24 17:08:32 +02:00
707849e6c4
Use a define instead of hard-coding a divider
2019-05-24 17:08:32 +02:00
a2fa8e5313
Rewrite the advance_isr scheduler
2019-05-24 17:08:32 +02:00
2d3fe3197c
Move calc_timer into speed_lookup_table for planner reuse
2019-05-24 17:08:32 +02:00
9425b6b07a
Planner: do not recalculate max_adv_steps, since it doesn't change
2019-05-24 17:08:32 +02:00
2c8e04bd5f
Planner: use the correct block when updating LA factors
2019-05-24 17:08:32 +02:00
3b528196dd
Fixup prefix echomagic for the LA config report
2019-05-24 17:08:32 +02:00
520cb491b2
Move speed lookup defs into a separate source
2019-05-24 17:08:32 +02:00
ebdc5e35e7
Remove two more OCR1A direct manipulations
...
Use _NEXT_ISR and st_reset_timer to correctly reinitialize and
re-schedule the advance ticks.
2019-05-24 17:08:32 +02:00
cbf1a85ec3
Switch original LA implementation with LA1.5
...
This discards several Prusa optimizations for LA1.0.
We'll re-implement those later if needed.
Debugging is turned on.
2019-05-24 17:08:32 +02:00
bf0c60dd45
Factor-out some repetition into fsensor_step
2019-05-24 17:08:32 +02:00
124540a06f
Adapt LA changes to ConfigurationStore
2019-05-24 17:08:32 +02:00
45563bfdd3
Formatting sanity
2019-05-24 17:08:32 +02:00
eeea2725cb
Partial LA15 support
2019-05-24 17:08:32 +02:00
098c0979ba
Merge pull request #1848 from MRprusa3d/PFW-853
...
recovery from "Stop()"
2019-05-24 09:54:07 +02:00
9cb0bc7bcf
Fix MINTEMP errors and fsensor runout
2019-05-24 08:46:44 +02:00
1399d7dcc8
support only for MK3/MK3S
2019-05-23 15:22:31 +02:00
df02030fe0
Merge pull request #1863 from DRracer/lcd20190523
...
Fix. menu texts and formatting - issues PFW-877 and PFW-879
2019-05-23 14:31:51 +02:00
63235625ab
pause printer by flag
2019-05-23 13:13:11 +02:00
e17f3f8405
change language files accordingly
2019-05-23 11:14:26 +02:00
da98977de3
Fix. menu texts and formatting - issues PFW-877 and PFW-879
2019-05-23 10:45:55 +02:00
a408f90659
recovery from "Stop()"
2019-05-18 21:28:59 +02:00
15ba17f110
Fix translator columns hint for Adjusting Z:
2019-05-16 17:30:15 +02:00
74d8c15b4f
Fix documentation.
2019-05-16 17:23:54 +02:00
dcfc6348ed
Fix documentation.
2019-05-16 17:22:47 +02:00
a453c6fc9d
Save 236B by improving functions in menu.cpp. Beware - the label now has
...
to come with a ':' as its last character. Changed language files along
with this commit too.
2019-05-16 16:43:44 +02:00
dad2065da6
Merge branch 'MK3' into rise_z
2019-05-15 16:37:17 +02:00
1f3877b221
Extract duplicate code into function. Saves 4B of flash.
2019-05-15 16:31:10 +02:00
fbc0c260b1
Merge pull request #1826 from ondratu/selftest_wizard
...
Selftest fan improvements
2019-05-15 13:43:48 +02:00
ebfc8c1c79
Fan autotest for swapping in Selftest
2019-05-15 10:10:46 +02:00
c851e158cc
Manual fan check menu have default (selected) option
2019-05-15 10:10:46 +02:00
1a78bd53ba
Fix compiler warning
...
sketch/Marlin_main.cpp: In function 'void marlin_wait_for_click()':
sketch/Marlin_main.cpp:9646:12: warning: unused variable 'busy_state_backup' [-Wunused-variable]
2019-05-14 19:11:46 +02:00
91e72a79f0
Fix compiler warning
...
sketch/Marlin_main.cpp:871:13: warning: unused variable 'ir_detected' [-Wunused-variable]
2019-05-14 19:07:50 +02:00
acfcd59369
Fix compiler warning:
...
sketch/menu.cpp: In function 'int menu_draw_item_puts_P(char, const char*, char)':
sketch/menu.cpp:184:1: warning: no return statement in function returning non-void [-Wreturn-type]
2019-05-14 18:32:40 +02:00
89fc9e7f92
sketch/menu.h:90:115: warning: invalid conversion from 'void (*)(int)' to 'void (*)(uint8_t) {aka void (*)(unsigned char)}' [-fpermissive]
...
#define MENU_ITEM_FUNCTION_NR_P(str, number, func, fn_par) do { if (menu_item_function_P(str, number, func, fn_par)) return; } while (0)
^
sketch/ultralcd.cpp:5926:5: note: in expansion of macro 'MENU_ITEM_FUNCTION_NR_P'
MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '1', extr_adj, 0); ////MSG_LOAD_FILAMENT_1 c=16
2019-05-14 18:25:43 +02:00
66d20f0297
Fix code formatting (indentation).
2019-05-14 16:45:15 +02:00
4de93ca19c
Fix eject filament menu items numbering.
2019-05-14 16:43:33 +02:00
150787efbd
Generate menu item texts Cut filament <nr.> during runtime to conserve flash.
2019-05-14 16:25:29 +02:00
6495a8fa58
Decrease flash reserved for secondary language.
2019-05-14 16:10:04 +02:00
7c4f66181f
Generate menu item texts Load filament <nr.> and Eject filament <nr.> during runtime to conserve flash.
2019-05-14 15:47:25 +02:00
dddc1b84e6
Merge pull request #1825 from prusa3d/MK3_3.7.1
...
Increase version 3.7.1 final.
2019-05-13 17:29:30 +02:00
efa8e6e6ba
Merge pull request #1658 from Harpalyke/save-ustep-res-with-M500
...
Allow save of uStep resolution with M500
2019-05-13 17:08:34 +02:00
e93f043fee
Increase version 3.7.1 final.
2019-05-13 15:09:58 +02:00
bbd1b60229
Merge pull request #1437 from craiglink/memory-overrun
...
set array size correctly to 4
2019-05-11 03:01:52 +02:00
12b801fa1f
Merge pull request #1397 from jhoblitt/plumbing/sh-chmod
...
make all shell scripts executable
2019-05-11 02:37:09 +02:00
0a343d4d66
Merge pull request #1806 from NotaRobotexe/fw_check
...
check if firmware is on right type of printer
2019-05-11 02:11:54 +02:00
176b28bc83
Merge pull request #1813 from prusa3d/MK3_3.7.1
...
Enable watchdog for all variants.
2019-05-10 17:33:44 +00:00
a9d6ae296b
Enable watchdog for all variants.
2019-05-10 16:30:08 +02:00
2a39fad400
Merge branch 'MK3' into bugfixes
2019-05-10 13:43:36 +00:00
084c6f2700
Merge pull request #1805 from DRracer/MK3
...
PFW-844
2019-05-10 13:41:59 +00:00
5707d4b85c
Set all target hot ends to 0 deg. Celsius instead of just hotend nr. 0 to be more safe with custom modifications.
2019-05-10 15:27:25 +02:00
dc4f30530d
Fix a number overflow to last line of LCD when doing large extruder in
...
menu Settings -> Move axis -> Extruder
2019-05-09 13:44:35 +02:00
714fb23de6
Merge remote-tracking branch 'upstream/MK3' into MK3
2019-05-09 13:40:28 +02:00
e7dd5c60d3
check if firmware is on right type of printer
2019-05-07 18:10:44 +02:00
8692565cf0
Merge pull request #1802 from XPila/MK3
...
Variable bed PWM resolution/frequency (adjusted to 5bits/32Hz)
2019-05-07 15:13:02 +00:00
f431d24762
Merge branch 'MK3' of https://github.com/DRracer/Prusa-Firmware into MK3
2019-05-07 16:17:14 +02:00
0124fbf9ee
Fix: display target extruder temperature on the main screen when doing
...
PID calibration
2019-05-07 16:15:42 +02:00
85806a0f38
variable bed pwm frequency fix (input value is 7bit, not 8bit)
2019-05-07 15:35:34 +02:00
b7fe43bf68
Deleted bad cols/rows definitions for translation.
2019-05-07 12:52:23 +02:00
58683da2fb
Variable bed PWM resolution/frequency (adjusted to 5bits/32Hz)
2019-05-06 18:07:42 +02:00
e56be687bb
Merge pull request #1800 from XPila/MK3
...
return with exitcode 1 if any language not generated properly
2019-05-06 15:58:34 +00:00
1a0370e1c7
Make macro ON_MENU_LEAVE() usage similar to macros MENU_ITEM_BACK_P() and MENU_ITEM_FUNCTION_P().
2019-05-06 17:39:00 +02:00
fa1bdd6ab1
Lang - decreased reserved space for secondary language (10496 bytes)
2019-05-06 17:29:47 +02:00
ffbdb43881
Remove commented code
2019-05-06 17:26:42 +02:00
41a827fa00
Removed unused texts, increased reserved space to 0x2e00 (11776 bytes)
2019-05-06 17:24:06 +02:00
0794430208
Fix for linearity correction not being stored to EEPROM when doing MENU-
...
UP
2019-05-06 15:33:13 +02:00
1c9d134c62
return with exitcode 1 if any language not generated properly
...
fix - include system_timer.h
2019-05-06 15:29:57 +02:00
e5911c42da
limit printed menu text to max 18 characters
2019-05-06 12:44:36 +02:00
3852aa4275
Different secondary language reserved space for MK3 and MK25
2019-04-30 12:42:18 +02:00
177c123b4d
Merge pull request #1780 from MRprusa3d/PFW-841
...
"stop" immediately after "pause" patch
2019-04-29 14:49:49 +00:00
8fadbf1b44
Do not call watchdog reset from updateTemperaturesFromRawValues().
2019-04-29 16:41:38 +02:00
b93f37ee02
"stop" immediately after "pause" patch
2019-04-29 14:39:19 +02:00
18dec75b56
MK2.5 - watchdog enabled + test (command "D-1")
2019-04-29 13:19:59 +02:00
f16bea26e5
raise the Z axis before filament loading to nozzle on MMU2S
2019-04-25 17:39:09 +02:00
238079fc95
Merge pull request #1763 from mkbel/save_flash_timer2
...
Do not compile timer02.c if not used. Saves 148B flash.
2019-04-24 16:07:17 +02:00
e8e7fa907f
Change comment
2019-04-24 15:52:24 +02:00
1d8b2b3e18
Secondary language reserved space resized
2019-04-24 15:22:17 +02:00
f25f8f1b71
Do not compile timer02.c if not used. Saves 148B flash.
2019-04-23 19:39:49 +02:00
ca449ef517
Merge pull request #1742 from XPila/MK3-bed_pwm_revert
...
Bed high frequency PWM disabled
2019-04-16 21:04:28 +00:00
75fac9dab2
Do not kill printer if External SPI flash W25X20CL is not responding.
...
Remove internationalization macro for this message. It has no sense to be translated as internationalization in most cases doesn't work if it is not responding.
Show this message instead of splash screen if the error is encountered.
There is no additional delay or wait for click, as such functions doesn't work in setup function.
2019-04-16 22:20:53 +02:00
1f9737b4a6
Bed high frequency PWM disabled
2019-04-16 16:48:01 +02:00
863c7158b2
use modification times for sdcard sort
2019-04-16 06:24:47 -04:00
7168c09eec
Merge pull request #1713 from mkbel/fix_octoprint_mmu_load_failed
...
Fix octoprint mmu load failed
2019-04-10 18:21:06 +02:00
b5f196406e
(preliminary) fix @ preHeatError II
2019-04-10 00:29:58 +02:00
0d3e3c506a
Merge remote-tracking branch 'prusa3d/MK3' into fix_octoprint_mmu_load_failed
2019-04-09 20:54:21 +02:00
c7d403733a
Allow load filament retry after button push unlimited times in case mmu_continue_loading() is in blocking mode.
2019-04-09 20:50:29 +02:00
32f3471862
print parameters checking
...
prusa_stat_diameter()
2019-04-09 15:22:08 +02:00
173062295f
Enable print fan while waiting for cooldown
2019-04-06 13:42:21 +03:00
84cabd3836
Change busy_state type, save 340B of flash
2019-04-05 15:20:34 +02:00
bf57a59147
Extract duplicate code into function. Saves 106B flash.
2019-04-05 15:12:35 +02:00
4bfa3d7e0b
Reporty busy: paused for user in case MMU is not responding.
2019-04-04 19:04:15 +02:00
bf1a55ab02
Add mmu_continue_loading blocking variant and use it for usb printing, so that "ok" is not returned to the controller in case MMU load failed.
...
Known limitation: MMU load failed is not handled properly if it happens again after user clicked printer button to continue print.
2019-04-04 18:15:37 +02:00
aa0edd09f5
(preliminary) fix @ (bed) preHeatError
2019-04-03 22:48:58 +02:00
4b1fc69088
"disable_z()" for Delta PSU III
...
stealthChop set if motor-disable (@ Z) required
2019-04-02 20:04:44 +02:00
fd96bde69f
Merge pull request #1667 from mkbel/Add_IR_sensor_fail_message
...
Add ir sensor fail message
2019-04-02 14:55:27 +02:00
3d-gussner
Alex Voinea
DRracer
odaki
MRprusa3d
vintagepc
Yuri D'Elia
MRprusa3d
Panayiotis-git
Marek Bel
XPila
Marek Běl
D.R.racer
michalrudolf
vintagepc
rhounsell
Paul Bransford
Marek Kühn
Simon Benoit
Keith Spitz
NotaRobotexe
Renzo Dani
Renzo
KDanielK
Vojtech Pavlik
Ondrej Tuma
PavelSindler