2051809e2f
TM: Store only the last autotune result state
...
- Remove tm::valid and temp_model_valid as it's a duplicate of the
calibrated() state.
- Add temp_model_autotune_result() for future use.
2022-12-12 17:52:48 +01:00
324e501b18
TM: Set default resistance levels for MK3/MK3S
...
Provide average calibrated values for all fan levels for MK3/MK3S
variants and enable the model by default.
This ensures the calibration step is not skipped unless explicitly
disabled.
Force-clear fan values during autotune to restore the previous
calibration behavior, as fan resistance levels can be too big and
prevent the autotune-with-selfcheck to fail.
2022-12-12 17:52:48 +01:00
877c0bd35c
Fix potential buffer overflow in LCD messages
2022-12-12 17:52:48 +01:00
e2f1bfe506
TM: Remove unnecessary display comments
...
Favor code readability
2022-12-12 17:52:48 +01:00
4d87f65b68
Merge pull request #3443 from gudnimg/m109-turn-off-fan
...
Turn off print fan while resuming print from RAM
2022-12-12 15:20:20 +01:00
d84e497007
Merge pull request #3805 from 3d-gussner/MK3_Fix_M862.4_strict
...
MK3: Fix `M862.4` with [strict] mode
2022-12-12 12:38:15 +01:00
613ea290f5
Add a comment
2022-12-10 10:04:17 +00:00
9ed46df97f
Don't show full screen message meant for single color setup
...
load_filament_to_nozzle will show a more precise full screen message when an MMU is used.
2022-12-10 10:00:58 +00:00
70451b6bd3
Turn off print fan while restoring print from RAM
2022-12-10 09:53:43 +00:00
40cc6dcb6d
Merge pull request #3783 from leptun/enable_PRUSA_SN_all_variants
...
Allow "PRUSA SN" to print the SN in eeprom on all variants
2022-12-09 14:51:57 +01:00
1e39012953
Merge pull request #3793 from gudnimg/PFW-1453
...
PFW-1453 Stop Print: Don't unload if FINDA is not triggered
2022-12-09 12:54:16 +00:00
68c5cdce1c
Merge pull request #3780 from gudnimg/stop-print-optimisations
...
optimisation: Improve Stop Print menu
2022-12-08 19:41:52 +01:00
92f2281b1a
Merge pull request #2335 from Panayiotis-git/MK3_NoBedHeating_onLoadUnload
...
@Panayiotis-git Thanks a lot!
Finally after 3 years 21 days your PR gets merged 🦕
2022-12-08 18:45:12 +01:00
0cedb92ac6
Simplify firmware/gcode version comparisons
2022-12-07 18:59:29 +01:00
96e4881da5
Merge pull request #3794 from gudnimg/fix-m862-q
...
Fix undefined pointer in `M862.2 Q` and `M862.3 Q`
2022-12-07 13:04:45 +01:00
6f5a67491c
Fix `M862.4` with [strict] mode
...
Max 8 falvor versions
2022-12-06 13:18:52 +01:00
1c9a3a6b25
Add Nozzle change menu to FARM mode under Settings
2022-12-05 18:22:18 +01:00
a8fe71df8c
PFW-1453 Stop Print: Don't unload if FINDA is not triggered
2022-12-05 16:45:57 +01:00
52965bd05d
Avoid using global variables
...
Flash: -68B
RAM: -4B
2022-12-05 16:43:51 +01:00
4c27d057b8
Don't inline fSetMmuMode
...
Saves 8 bytes of flash
2022-12-05 16:43:51 +01:00
074b62361f
Fix #3788
...
fSetMmuMode needs to be called
in order for the commands to work:
M862.2 Q
M862.3 Q
2022-12-05 16:43:51 +01:00
c75c81ce4f
Do not heat the bed, on load/unload
...
If during a paused print, the preheat is canceled, keep the bed target temperature
Display bed temperatures only if bed is also heated
Remove not needed variables nTargetOld and nTargetBedOld from the mFilamentItem function
Define new Setting "HeatBedOnLoad" [Yes/No]
2022-12-04 19:26:34 +02:00
fb530ce543
PFW-1454 Send button to MMU on MMU SELFTEST FAILED screen
...
Fixes an issue where the button on the MMU error screen doesn't do anything
when MMU SELFTEST FAILED is rendered
2022-12-04 11:04:00 +00:00
6d62fb0d65
Merge pull request #3784 from DRracer/opt01
...
Optimize rendering MMU Error sensor line
2022-12-02 17:12:05 +00:00
3e976e04ca
Merge pull request #3777 from 3d-gussner/PFW-1431
...
PFW-1431: Add "PA Preheat"
2022-12-02 13:34:18 +01:00
54ef2a6c28
Merge pull request #3769 from 3d-gussner/MK3_Temp_model_cal_wizard
...
PFW-1434: MK3 Temp model calibration during wizard
2022-11-30 15:33:38 +01:00
1bbcdb0c0d
Merge pull request #3774 from 3d-gussner/MK3_Nozzle_change
...
PFW-1435 Nozzle change menu
2022-11-30 15:32:18 +01:00
0a6388cc56
Update internal translations
...
Fix G28 W
2022-11-30 15:01:24 +01:00
500131d51d
fullscreen message: use \n to force the next word on the next line
...
Useful for printing short URLs since those contain punctuation characters, which get treated at the end of a word under usual circumstances
2022-11-30 10:17:28 +01:00
8f44d1102c
Add PA preheat menu
2022-11-30 06:42:32 +01:00
23613c7eb1
optimisation: Stop print menu
...
There is no need to manually track the cursor position.
We can use the menu API:
MENU_BEGIN()
...
// menu items in between here
...
MENU_END()
Change in memory:
Flash: -116 bytes
SRAM: 0 bytes
2022-11-26 10:18:47 +00:00
a666c0f6f4
Optimize rendering MMU Error sensor line
...
CPUFLASH: -32B
2022-11-25 13:30:53 +01:00
83c9e946e4
Fix recursion
2022-11-24 16:15:51 +01:00
4f3c188017
Update internal translations
...
Fix typo
2022-11-24 10:53:04 +01:00
fea1520dfb
Fix & optimize FW version parsing and checking
...
PFW-1433
2022-11-23 13:34:13 +01:00
32673e1681
Nozzle change menu
2022-11-23 11:39:26 +01:00
2cd42f8433
Fix typo
...
Add Norwegian translations thanks to @OS-kar
2022-11-22 08:26:20 +01:00
c8157919b1
PFW-1440 Fix issue where cooldown timer is not set after a faile retry
2022-11-21 12:54:53 +01:00
37ac33bc32
Fix compiler warning
2022-11-21 12:54:53 +01:00
fe6e3ca2b1
Unload first before retrying
...
Should free the filament if accidentally held by the fsensor.
2022-11-20 19:23:07 +01:00
5639620041
Avoid watchdog while doing VerifyFilamentEnteredPTFE
2022-11-20 17:27:36 +01:00
84d9eee61d
Resume hotend temperature if parked + MMU restarted
...
PFW-1355
2022-11-20 17:27:36 +01:00
01c1f4a8dd
Load test: Monitor unload as well
2022-11-20 17:27:36 +01:00
5c8ea4c90a
fixup
2022-11-20 17:27:36 +01:00
327f0edb17
VerifyFilamentEnteredPTFE must take into account the Extra Loading Distance
2022-11-20 17:27:36 +01:00
c9d9ba0b1a
Add a bracket around subtraction, just in case
2022-11-20 17:27:36 +01:00
ef51b5778d
Fix VerifyFilamentEnteredPTFE
...
Test should push filament first and then retract.
2022-11-20 17:27:36 +01:00
aaebaf163f
Cleanup MSG_MMU_POWER_FAILS
2022-11-20 17:27:36 +01:00
a17153f877
Make TMC mask more readable
2022-11-20 17:27:36 +01:00
f1ed2fc5c7
Fix issue where tool_change_extruder is not reset after retry
2022-11-20 17:27:36 +01:00
541cd3ae94
Remove debug messages of Interrupted state
2022-11-20 17:27:36 +01:00
46f4f2658d
PFW-1432 Reduce LOC
...
If verification test fails, increment load fail statistic
2022-11-20 17:27:36 +01:00
03235c8aab
PFW-1432 restore toolchange load testing
2022-11-20 17:27:36 +01:00
adb24cd410
Increment errors in ReportError
2022-11-20 17:27:36 +01:00
4eaabbf092
Revive MMU stats + LCD screens
2022-11-20 17:27:36 +01:00
fe11b7a247
Tune Interrupted state based on unit tests
...
Now finally the printer can restart ToolChange if MMU restarted.
2022-11-20 17:27:36 +01:00
ffbd95b482
Unify naming convention (index->slot)
...
in all top level MMU-related functions
2022-11-20 17:27:36 +01:00
e414413b2e
Refactor ToolChange+LoadToNozzle
...
Add basic infrastructure for handling of repeated commands until they finish correctly.
2022-11-20 17:27:36 +01:00
10a9e0f0a0
Recover from MMU restart while performing a command
...
PFW-1427
2022-11-20 17:27:36 +01:00
603faddd25
Fix bug where toolchange counter is not rendered
2022-11-20 15:42:29 +00:00
5dc539cda5
fixup
2022-11-20 13:12:01 +01:00
62810c5a7c
optimisation: lcdui_print_extruder
...
Simplify the rendering to cover more scenarios:
"[nr.]>?"
"?>?"
Both of these indicate there is a bug in the firmware.
Currently these are not handled and result in the status screen being corrupted.
This is because we are trying to write a 3 digit number
where there is not space on the LCD for it.
Change in memory:
Flash: -52 bytes
SRAM: 0 bytes
2022-11-20 13:12:01 +01:00
281a217549
Update Temp Model messages
...
Deepl translate cs,de,es,fr,it,nl,pl
2022-11-20 10:49:46 +01:00
f2f54da5b0
Unhack selftest hack during wizard
2022-11-20 10:48:49 +01:00
d592586d94
cleanup: remove dead code lcd_adjust_z()
...
It's only used when MESH_BED_LEVELING is not defined. According to
the configuration files, all printers supported use MESH_BED_LEVELING.
So I think we are safe in removing this dead code.
2022-11-19 22:19:48 +00:00
411d1da3c8
Merge pull request #3763 from gudnimg/optimisation-float-conversions
...
optimisation: TCodes accepts `uint8_t` not `float`
2022-11-18 19:52:22 +00:00
58775b8b55
Change unsigned long to uint32_t
2022-11-18 14:50:07 +01:00
bda134a01e
Save a bit of RAM from CS
...
Do not store EEPROM_VERSION in ram
flash: -6
RAM: -2
2022-11-18 14:50:07 +01:00
ef83fefce1
More optimization
2022-11-18 14:50:07 +01:00
8f4ac82273
eeprom_init_default also returns the read/default value
2022-11-18 14:50:07 +01:00
b317786110
More configuration store savings
...
flash: -94B
RAM: 0B
2022-11-18 14:50:07 +01:00
b551bdae76
Some more CS improvements
...
flash: -2B
RAM: 0B
2022-11-18 14:50:07 +01:00
5305dbd299
Sheet name initialization improvements
...
The code looks better, but it takes a bit more flash. I prefer it like this
flash: +20B
ram: 0B
2022-11-18 14:50:07 +01:00
bba5385a61
Move string to progmem
...
flash: -84B
RAM: -4B
2022-11-18 14:50:07 +01:00
6edc71d0ae
Remove deprecated configs
2022-11-18 14:50:07 +01:00
dcc48c0052
Remove eeprom _int8t functions
...
flash: -48B
RAM: -4B
2022-11-18 14:50:07 +01:00
af60cd7d79
Optimize EEPROM_writeData and EEPROM_readData
...
flash: -162B
RAM: -4B
2022-11-18 14:50:07 +01:00
771f833a44
Implement eeprom dword functions
2022-11-18 14:50:07 +01:00
ca943cceec
Split the increment function into increment and add
...
No size difference since the compiler did a good job optimizing the inc argument (always 1 before).
2022-11-18 14:50:07 +01:00
455c29e78b
Optimize EEPROM usage/functions
2022-11-18 14:50:07 +01:00
414d3f1c12
Display Welcome message after MMU progress report ends
...
Should make the status line look cleaner when the printer is not printing.
2022-11-18 14:09:48 +01:00
c86c961d4e
M600: Fix bug where fan is not turned off
...
The firmware saves the current fanspeed before parking,
and the fanspeed is restored after unparking. The problem is the fan
was never actually paused.
Fixes #3670
2022-11-18 11:18:29 +01:00
b147fcee77
XYZ calibration fixes
2022-11-18 00:18:42 +01:00
384a6d1989
Fix wizard serial messages
2022-11-17 23:03:03 +01:00
30ec4e8b53
Inital Temp Model cal wizard
2022-11-17 15:19:35 +01:00
2096accc5f
Remove unused gcode level check code
...
This code was introduced with v3.8.0 but was always disabled.
I propose the code be removed since it has not been enabled
for 3 years since its introduction.
2022-11-17 08:05:27 +01:00
6059398004
Introduce MMU Error: INSPECT_FINDA (FINDA_FLICKERS)
2022-11-17 07:58:11 +01:00
29882b625b
Remove LcdCommands::FarmModeConfirm
2022-11-17 05:46:33 +01:00
e11ef11a64
PFW-1425 Rename "Load to Extruder" to "Loading Test"
2022-11-16 06:00:15 +01:00
7b43f322de
PFW-1425 Move Reset MMU setting
2022-11-15 17:32:27 +01:00
b4920d7fa8
PFW-1425 use mmu2.Enabled instead of EEPROM read
2022-11-15 17:32:27 +01:00
3f4ac254ab
PFW-1425 Move MMU settings under a common if statement
...
We only need to check if the MMU is enabled once,
no need to do it in every submenu.
This way we save little bit of flash memory.
Change in memory:
Flash: -24 bytes
SRAM: 0 bytes
2022-11-15 17:32:27 +01:00
8f3f071fd4
PFW-1425 Move Load to Extruder menu to Settings menu
...
No change in memory footprint
2022-11-15 17:32:27 +01:00
5239f1c176
cleanup: remove old extern for mmu_print_saved
2022-11-15 09:44:02 +01:00
4f58812478
optimise lcd_sdcard_menu with lcd_print_pad
...
Change in memory:
Flash: -46 bytes
SRAM: 0 bytes
2022-11-13 09:29:37 +01:00
184e19dd60
further optimise lcdui_print_status_line
...
We can use lcd_print_pad to determine
whether the end of the file name was reached
lcd_print_pad now returns the last character pointed to.
If the end of the string was reached, it will be the null delimeter which
evaluates to "false" in an if statment (same as NULL).
Else "true" means the end of the string was not reached.
Change in memory:
Flash: -42 bytes
SRAM: 0 bytes
2022-11-13 09:29:37 +01:00
0af7ef0201
optimisation: reduce code size in showing file name being printed
...
Change in memory:
Flash: -52 bytes
SRAM: 0 bytes
2022-11-13 09:29:37 +01:00
a2bbc4f585
Merge pull request #3745 from leptun/MK2.5_XYZ_Cal_fixes
...
MK2.5 XYZ calibration fixes
2022-11-12 21:48:16 +01:00
006fe110cc
Don't raise MMU error screen until retry is done
...
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2022-11-12 18:47:10 +01:00
68bd7f9b19
Fix excessive flash usage.
2022-11-12 18:47:10 +01:00
Yuri D'Elia
Yuri D'Elia
Guðni Már Gilbert
3d-gussner
Alex Voinea
Panayiotis-git
Jakub Dolezal
D.R.racer
VintagePC