a93cd93756
Move `MK3 firmware detected on MK3S printer` and `MK3S firmware detected on MK3 printer` to `messages.cpp/.h`
...
Update pot and po files
2024-04-04 08:58:46 +02:00
97584d571e
Update all `_i("` to `messages.cpp/.h`
...
Update `lang/po/*.po*` files
2024-04-04 08:23:40 +02:00
af03662c8f
Merge pull request #4602 from 3d-gussner/MK3_M913
...
Enable M913
2024-04-04 07:30:06 +02:00
8d1be264e5
Thanks to @gudnimg pointing out duplicate if statements that are covered by the top-level if statement.
2024-03-27 17:44:50 +01:00
9e8aadd8af
Revert split if statements
...
Kept few as these get too long
2024-03-27 10:15:07 +01:00
5f26d5f7da
Fix MK2.5 builds
...
- removed `reset_uvlo` as `#ifdef UVLO_SUPPORT` everywhere for MK2.5 is a huge change.
2024-03-27 09:42:59 +01:00
1ac69247d7
Fix and improve PowerPanic
...
- No wait for heatup during host print recovery
- No extra Z lift when power panic happens during paused print
- added an extra EEPROM value
- fixed `EEPROM_LAST_ITEM`
- changed EEPROM version to 3.14.0
- Added `reset_uvlo` function
2024-03-27 09:09:55 +01:00
52275322a2
Remove redundant check
2024-03-20 08:41:29 +01:00
b6e2a8875b
M913 report rescaled currents
2024-03-15 12:47:18 +01:00
2df8a18fde
Fix MK2.5/S builds
2024-03-15 12:47:18 +01:00
82d102d740
Enable M913
2024-03-15 12:47:18 +01:00
9f8115639a
LCD menu
...
- Hide menus during recovering
- Un-/Load filament with FSensor active only show Load OR Unload depending on FS sate
- Host
- Reprint only shown when M79 timer is active
- Resume only shown when M79 timer active
- Stop print always shown when printing, paused and recovering
2024-03-13 17:43:00 +01:00
a04063f966
Fix DEBUG_UVLO_AUTOMATIC_RECOVER
2024-03-13 17:43:00 +01:00
e2823c3c35
Reset EEPROM_UVLO after recovering
...
Undo PP Z lift
2024-03-13 17:43:00 +01:00
9e52b78285
Add ubs_timer.start to PRUSA uvlo
...
Cleanup format
2024-03-13 17:43:00 +01:00
15ea2784c3
Fix another saved_printing_type issue
2024-03-13 17:43:00 +01:00
4e032f6f11
Change to saved_printing_type fixes few issues during power panic recovery
2024-03-13 17:43:00 +01:00
fc157d1f6c
Fix missing eeprom_update_byte for debuging
2024-03-13 17:43:00 +01:00
5b7c583dba
Fix `print_saved_in_ram` to be true for both SD and host prints
2024-03-13 17:43:00 +01:00
9ec5639d29
Rename `sd_print_saved_in_ram` to `print_saved_in_ram` as it saves sd and host prints
2024-03-13 17:43:00 +01:00
112d3c672c
Update debug_printer_states
2024-03-13 17:43:00 +01:00
16aa2e7834
Hide LCD menu "Reprint" during power panic recovery
2024-03-13 17:43:00 +01:00
886d610524
Cancle power recovery correctly using cancel_saved_printing();
2024-03-13 17:43:00 +01:00
95c6ea5889
Fix to correct EEPROM address
2024-03-13 17:42:59 +01:00
47235bbf62
Power panic recover lift by 20 Z_PAUSE_LIFT only once
...
by setting PENDING_RECOVERY_RETRY
Also the default saved_printing_type after a reboot is now PRINT_TYPE_NONE
2024-03-13 17:42:59 +01:00
88b77ecce2
Add bool printer_recovering
2024-03-13 17:42:59 +01:00
517900c3fe
Add DEBUG_PRINTER_STATES
2024-03-13 17:42:59 +01:00
4bca4021c6
Bump up MMU FW version to 3.0.2
...
.
2024-03-04 11:55:54 +01:00
f9bdb8b8aa
Add DEBUG_EEPROM_CHANGES
2024-02-27 08:56:18 +01:00
af64d446bf
Fix MK2.5 build
2024-02-26 10:14:01 +01:00
aededa34bb
Properly check for Z crashes while lowering/raising Z for Z calibration
2024-02-26 10:13:56 +01:00
326019a8bf
Use stallguard during Z calibration after XYZ calibration
2024-02-26 10:13:51 +01:00
692f062fee
Add tmc currents debug
2024-02-26 10:13:45 +01:00
ccb956eae4
Restore custom currents after homing end
2024-02-19 15:33:06 +01:00
e6a4856196
Restore default XY currents after homing
2024-02-19 15:32:22 +01:00
dc3b3387ed
Merge pull request #4593 from 3d-gussner/MK3_Fix_Stop_print_for_host_prints
...
Fix Stop print to send host action when host print is active
2024-02-05 10:39:49 +01:00
727a82bb3d
Fix Stop print to send host action when host print is active
2024-02-05 08:14:10 +01:00
794251884a
PFW-1552 Fix a regression introduced in f022567
...
Aborting the print while the nozzle and bed are still heating up
to their target temperatures should disable the heaters immediately.
2024-02-04 12:06:14 +00:00
bacb0b1b07
Fix 3x3 mbl condition
2024-02-02 14:45:30 +01:00
6682237c7a
Merge pull request #4582 from gudnimg/PFW-1552
...
PFW-1552 and PFW-1544: Fix issue with MMU unload when a print is stopped with a cold nozzle
2024-02-01 06:22:49 +01:00
e7ef3d6db5
Fix nitpicking
2024-01-29 13:07:48 +01:00
52ba1b534d
Add HOST power panic auto recovery option
...
Change `PRINT_TYPE_USB` to `PRINT_TYPE_HOST`
Fix more rebase issues
Fix rebase issue again
2024-01-29 13:07:48 +01:00
ffeda98894
Add power panic recovery to active state
...
Fix M79 send only recovery action when power panic recovery is pending
Fix rebase issues
2024-01-29 13:07:48 +01:00
d1b88e1684
Don't show `Print from SD` when host print is paused
2024-01-29 13:07:48 +01:00
c9aba688e3
Saving few bytes by removing spaces in `//action:` host commands. Thanks to @sarusani pointing out inconsistent documentation.
...
Renaming `MSG_OCTOPRINT_*` to `MSG_HOST_ACTION_*` as it is used also with PrusaLink and other host printing solutions
Fix rebase issues
2024-01-29 13:07:48 +01:00
fda30f82c8
Don't show `Set Ready`when not idle
2024-01-29 13:07:48 +01:00
abcb1017f3
PFW-1553 fix regression where SD card file is not closed when stopping paused print
...
When a print is paused, card.sdprinting is set to false. Instead we can check
if the SD card has been mounted and try to close the file.
The closefile() method will check internally whether or not the file is open.
2024-01-27 15:21:08 +00:00
f022567239
PFW-1522 Fix an issue where MMU unloads while nozzle is cold if print is stopped
...
In the case of a Fan Error, the print is paused. If the nozzle is allowed to cool for a while before the print is stopped via the LCD, then the MMU will try to unload with a cold nozzle.
This can happen with ANY recoverable thermal errors.
In this commit I attempt to fix all scenarios. Including PFW-1544 where the nozzle is cooling down when the print has finished normally.
PFW-1544
PFW-1552
Change in memory:
Flash: +74 bytes
SRAM: 0 bytes
2024-01-27 11:54:54 +00:00
c0b76dd5cf
cleanup: move st_synchronize under the if statement
...
If the if statement is not true, then the st_synchronize call is not useful
The raise_z call above the if statement does not need it since it always calls st_synchronize (blocking move)
No change in memory
2024-01-27 10:47:23 +00:00
3957dc91aa
Add commit number and hash to `M115`
...
Don't show UUID only if defined
2024-01-22 16:31:23 +01:00
3d-gussner
Alex Voinea
D.R.racer
gudnimg