2a4c012e80
Pre-release update bump up verion and build number
2024-05-21 15:25:01 +02:00
63e6d63baf
Remove whitespace
2024-05-06 13:02:05 +02:00
f445eab230
MMU: Add workaround for broken Tune button
...
If the MMU is processing a command, the Tune button can't be executed.
Change in memory:
Flash: +16 bytes
SRAM: 0 bytes
2024-05-06 13:00:12 +02:00
a4ee9e5210
Fix Autoreport broken in 3957dc91aa
2024-04-17 08:59:29 +02:00
a93cd93756
Move `MK3 firmware detected on MK3S printer` and `MK3S firmware detected on MK3 printer` to `messages.cpp/.h`
...
Update pot and po files
2024-04-04 08:58:46 +02:00
97584d571e
Update all `_i("` to `messages.cpp/.h`
...
Update `lang/po/*.po*` files
2024-04-04 08:23:40 +02:00
af03662c8f
Merge pull request #4602 from 3d-gussner/MK3_M913
...
Enable M913
2024-04-04 07:30:06 +02:00
8d1be264e5
Thanks to @gudnimg pointing out duplicate if statements that are covered by the top-level if statement.
2024-03-27 17:44:50 +01:00
9e8aadd8af
Revert split if statements
...
Kept few as these get too long
2024-03-27 10:15:07 +01:00
5f26d5f7da
Fix MK2.5 builds
...
- removed `reset_uvlo` as `#ifdef UVLO_SUPPORT` everywhere for MK2.5 is a huge change.
2024-03-27 09:42:59 +01:00
1ac69247d7
Fix and improve PowerPanic
...
- No wait for heatup during host print recovery
- No extra Z lift when power panic happens during paused print
- added an extra EEPROM value
- fixed `EEPROM_LAST_ITEM`
- changed EEPROM version to 3.14.0
- Added `reset_uvlo` function
2024-03-27 09:09:55 +01:00
52275322a2
Remove redundant check
2024-03-20 08:41:29 +01:00
b6e2a8875b
M913 report rescaled currents
2024-03-15 12:47:18 +01:00
2df8a18fde
Fix MK2.5/S builds
2024-03-15 12:47:18 +01:00
82d102d740
Enable M913
2024-03-15 12:47:18 +01:00
9f8115639a
LCD menu
...
- Hide menus during recovering
- Un-/Load filament with FSensor active only show Load OR Unload depending on FS sate
- Host
- Reprint only shown when M79 timer is active
- Resume only shown when M79 timer active
- Stop print always shown when printing, paused and recovering
2024-03-13 17:43:00 +01:00
a04063f966
Fix DEBUG_UVLO_AUTOMATIC_RECOVER
2024-03-13 17:43:00 +01:00
e2823c3c35
Reset EEPROM_UVLO after recovering
...
Undo PP Z lift
2024-03-13 17:43:00 +01:00
9e52b78285
Add ubs_timer.start to PRUSA uvlo
...
Cleanup format
2024-03-13 17:43:00 +01:00
15ea2784c3
Fix another saved_printing_type issue
2024-03-13 17:43:00 +01:00
4e032f6f11
Change to saved_printing_type fixes few issues during power panic recovery
2024-03-13 17:43:00 +01:00
fc157d1f6c
Fix missing eeprom_update_byte for debuging
2024-03-13 17:43:00 +01:00
5b7c583dba
Fix `print_saved_in_ram` to be true for both SD and host prints
2024-03-13 17:43:00 +01:00
9ec5639d29
Rename `sd_print_saved_in_ram` to `print_saved_in_ram` as it saves sd and host prints
2024-03-13 17:43:00 +01:00
112d3c672c
Update debug_printer_states
2024-03-13 17:43:00 +01:00
16aa2e7834
Hide LCD menu "Reprint" during power panic recovery
2024-03-13 17:43:00 +01:00
886d610524
Cancle power recovery correctly using cancel_saved_printing();
2024-03-13 17:43:00 +01:00
95c6ea5889
Fix to correct EEPROM address
2024-03-13 17:42:59 +01:00
47235bbf62
Power panic recover lift by 20 Z_PAUSE_LIFT only once
...
by setting PENDING_RECOVERY_RETRY
Also the default saved_printing_type after a reboot is now PRINT_TYPE_NONE
2024-03-13 17:42:59 +01:00
88b77ecce2
Add bool printer_recovering
2024-03-13 17:42:59 +01:00
517900c3fe
Add DEBUG_PRINTER_STATES
2024-03-13 17:42:59 +01:00
4bca4021c6
Bump up MMU FW version to 3.0.2
...
.
2024-03-04 11:55:54 +01:00
f9bdb8b8aa
Add DEBUG_EEPROM_CHANGES
2024-02-27 08:56:18 +01:00
af64d446bf
Fix MK2.5 build
2024-02-26 10:14:01 +01:00
aededa34bb
Properly check for Z crashes while lowering/raising Z for Z calibration
2024-02-26 10:13:56 +01:00
326019a8bf
Use stallguard during Z calibration after XYZ calibration
2024-02-26 10:13:51 +01:00
692f062fee
Add tmc currents debug
2024-02-26 10:13:45 +01:00
ccb956eae4
Restore custom currents after homing end
2024-02-19 15:33:06 +01:00
e6a4856196
Restore default XY currents after homing
2024-02-19 15:32:22 +01:00
dc3b3387ed
Merge pull request #4593 from 3d-gussner/MK3_Fix_Stop_print_for_host_prints
...
Fix Stop print to send host action when host print is active
2024-02-05 10:39:49 +01:00
727a82bb3d
Fix Stop print to send host action when host print is active
2024-02-05 08:14:10 +01:00
794251884a
PFW-1552 Fix a regression introduced in f022567
...
Aborting the print while the nozzle and bed are still heating up
to their target temperatures should disable the heaters immediately.
2024-02-04 12:06:14 +00:00
bacb0b1b07
Fix 3x3 mbl condition
2024-02-02 14:45:30 +01:00
6682237c7a
Merge pull request #4582 from gudnimg/PFW-1552
...
PFW-1552 and PFW-1544: Fix issue with MMU unload when a print is stopped with a cold nozzle
2024-02-01 06:22:49 +01:00
e7ef3d6db5
Fix nitpicking
2024-01-29 13:07:48 +01:00
52ba1b534d
Add HOST power panic auto recovery option
...
Change `PRINT_TYPE_USB` to `PRINT_TYPE_HOST`
Fix more rebase issues
Fix rebase issue again
2024-01-29 13:07:48 +01:00
ffeda98894
Add power panic recovery to active state
...
Fix M79 send only recovery action when power panic recovery is pending
Fix rebase issues
2024-01-29 13:07:48 +01:00
d1b88e1684
Don't show `Print from SD` when host print is paused
2024-01-29 13:07:48 +01:00
c9aba688e3
Saving few bytes by removing spaces in `//action:` host commands. Thanks to @sarusani pointing out inconsistent documentation.
...
Renaming `MSG_OCTOPRINT_*` to `MSG_HOST_ACTION_*` as it is used also with PrusaLink and other host printing solutions
Fix rebase issues
2024-01-29 13:07:48 +01:00
fda30f82c8
Don't show `Set Ready`when not idle
2024-01-29 13:07:48 +01:00
3d-gussner
Guðni Már Gilbert
Alex Voinea
D.R.racer