dfddf3eaa5
Initial commit for MMU statistics
2022-09-16 10:22:39 +02:00
fb087fc535
PFW-1386 Add M707 and M708
...
WriteRegister and ReadRegister function will create new compiler
warnings due to unused parameters, we can ignore it for now.
2022-09-16 10:22:38 +02:00
2662e09f1e
Another message remove from RAM
2022-09-16 10:22:38 +02:00
022aa53b2d
Remove active_extruder completely
...
we only use 1 extruder + saves ~800B
2022-09-16 10:22:38 +02:00
87a4f58e66
PFW-1363 Change MMU Error parking position
2022-09-16 10:22:38 +02:00
703c463a49
Optimize unload
...
Toolchange during print is now much quieter.
Excessive E-motor movement during print is now gone
2022-09-16 10:22:38 +02:00
47e57646ea
Optimize load
...
Don't start moving the E-motor immediately
Instead of starting the E-motor move when the load to extruder starts,
we can start when we are loading to the fsensor. At that stage
the MMU has changed from a fast load to a slow load.
2022-09-16 10:22:38 +02:00
6d6f9583ea
Initialize retryAttempts in constructor
2022-09-16 10:22:38 +02:00
485ed4a213
Fix issue where logs show two corrupted chars
...
Issue only appears when LANG_MODE = 1
2022-09-16 10:22:38 +02:00
bc85a41059
Fix xflash flashing
2022-09-16 10:22:38 +02:00
be3f9376ba
Add missing break
2022-09-16 10:22:38 +02:00
ba52430e1d
Magic numbers are bad...
2022-09-16 10:22:38 +02:00
69c39e2281
An attempt at fixing the retry. Discussion needed.
2022-09-16 10:22:38 +02:00
c412f062c8
Perform 3xRetry automatically
...
This is a draft PR showing the potential 3x retry implementation on the printer's side.
It is much less code and looks more reliable than the same functionality in the MMU FW.
Still, more work needs to be done:
- [ ] Button is sent to the MMU even before returning from the parking position
- [ ] Then the button is sent again
- [ ] Then the printer runs out of retryAttempts
We need to find a better spot to check for "automatic" retry and issuing of the buttons
2022-09-16 10:22:38 +02:00
6b7a018f9b
PFW-1354 Fix slow button processing ( #37 )
...
* Fix MK3S buttons being processed too slowly
After a button is selected on the MK3S MMU error screen, we need to process it before asking for another MMU Query.
Because the MMU Query will make the Error screen return and overwrite the status screen
* Add back CheckUserInput for ButtonPushed event
2022-09-16 10:22:38 +02:00
d420b20bd9
Add a missing break
...
I don't see any difference in behaviour but this should be more correct
2022-09-16 10:22:38 +02:00
3520020b24
* Correct the unload length on the MK3S side
...
* Pull all numbers into global constants
2022-09-16 10:22:38 +02:00
6eb2767dd2
PFW-1334 Distinguish between a retry unload and U0 unload
...
U0 unload uses the ramming sequence, while the retry unload does not because the MMU starts unloading much sooner
2022-09-16 10:22:38 +02:00
9a52bb5d04
Add MMU2_UNLOAD_TO_FINDA_FEED_RATE
2022-09-16 10:22:38 +02:00
59d19a8330
PFW-1334 Move E-motor on FSENSOR error retry
2022-09-16 10:22:38 +02:00
b8432e6bf2
Partial fix for PFW-1334
...
When a FSENSOR error happens, the first step for the MK3S should be to stop any loading by stopping the E-motor.
From this point, the buttons should determine what the MK3S does next.
2022-09-16 10:22:38 +02:00
ace5130d9f
PFW-1375 MMU error reported by MK3S does not appear on LCD
2022-09-16 10:22:38 +02:00
d7d6885765
PFW-1351 Cooldown timeout ( #33 )
...
* PFW-1351 WIP
* Fix bug with cooldown timing due to bad bitfield.
* Use default safety timer value for timeout
2022-09-16 10:22:38 +02:00
121d43f896
Add a Try-Load-to-Bondtech operation
...
PFW-1347
2022-09-16 10:22:38 +02:00
0e96169bb3
remove logspam
2022-09-16 10:22:38 +02:00
d9676eff25
Fixed buged temperature resume.
2022-09-16 10:22:38 +02:00
f9bedc3c94
Button handling WIP
2022-09-16 10:22:38 +02:00
9a20c85a5d
First pass, improving the error recovery.
2022-09-16 10:22:38 +02:00
1e391f303c
PFW-1344 Fullscreen message Loading Filament
...
When loading a filament through the LCD,
show a full screen message:
Loading Filament N
Where N can range from 0 to 5.
2022-09-16 10:22:38 +02:00
8fd1653b84
PFW-1343 initial commit
2022-09-16 10:22:38 +02:00
d5cdb412ba
Introduce a way to read the previous tool used
2022-09-16 10:22:38 +02:00
e39bc3f12d
During Tx, temporarily allow cold extrusion
...
This prevents a FSENSOR DIDNT TRIGGER error
and allows the bondtech gears to grab the filament.
2022-09-16 10:22:38 +02:00
a1881b4a07
Disable filament runout when MMU is unloading
2022-09-16 10:22:38 +02:00
762080ab1a
Fix some partking and recovery bugs
2022-09-16 10:22:38 +02:00
f155c7664d
Add missing CheckUserInput calls, fix bad array entry for FW_update
2022-09-16 10:22:38 +02:00
73c486cc2f
- Fix DisableMMU button on FW incompat
...
5823c14
- Implement eeprom var, fix reset
2022-09-16 10:22:38 +02:00
236098dbca
Make init MMU error screens send buttons (Idle mode)
2022-09-16 10:22:38 +02:00
b880559ba7
Reset MMU upon start + fix reporting its start errors
2022-09-16 10:22:38 +02:00
1ff7459743
Re-enable filament runout + add debug msgs
...
Needs a fix on the MMU side (report FeedToBondtech::DisengageIdler)
2022-09-16 10:22:38 +02:00
bd932b3b10
Cleanup: Fix two compiler warnings
2022-09-16 10:22:38 +02:00
7b91e73c8b
Fix issue where error screen updates too slowly in manage_response
2022-09-16 10:22:38 +02:00
0e75a03c8c
Reuse FSensor runout blocking impl. throughout the whole FW
2022-09-16 10:22:38 +02:00
0bd3dfdcf7
This starts to print ;)
...
Temporarily disabled filament runout as this breaks ToolChange operation
yet for unknown reason.
2022-09-16 10:22:38 +02:00
456ddbb538
Handle the new MMU states (slow load to fsensor)
2022-09-16 10:22:38 +02:00
8a92865969
Update MK3S to match MMU PR#168
...
- new progress and error codes
- remove #error from mmu2_power.cpp as it makes no sense
- remove temporary error translation code
2022-09-16 10:22:37 +02:00
45edc69cc4
Add back menu it confirm if extrusion has correct color after loading to nozzle via LCD
...
I've added the call to this message via the menu function to ensure it
only appears when interacting with the LCD
2022-09-16 10:22:37 +02:00
e817a2d321
Don't block OnMMUProgressMsg while waiting for fsensor to trigger
2022-09-16 10:22:37 +02:00
0aa3a5855e
Add TODO to prompt user if extruder is extruding correct color
2022-09-16 10:22:37 +02:00
1c25041134
Add the load to nozzle sequence once the MK3S takes control and MMU has disengaged idler.
...
Also removed ProgressCode::FeedingToNozzle from switch-case since it is not used for this purpose at the moment.
2022-09-16 10:22:37 +02:00
3e77f9f3a1
Reduce grinding when loading to the fsensor
...
- We need to take into account additional 35mm move by the MMU.
- While the fsensor is not triggered, reduce the extruder movement each step from 20mm to 5mm. This should help reduce the variance in the filaments position before we run the final load to nozzle sequence.
2022-09-16 10:22:37 +02:00
Guðni Már Gilbert
D.R.racer
Alex Voinea
VintagePC