48fcffb588
Set the correct pins for RAMPS v1.1
2011-02-11 11:57:17 +11:00
3c5acd7ca7
disable interrupt if setTimer(0) is called
2011-02-11 11:53:27 +11:00
d91f30eda1
ensure step timer doesn't fire by itself after a period of inactivity
2011-02-10 19:57:16 +11:00
69f30f0691
timer: Use 2 comparator interrupts, one for the clock, the other for stepping.
...
The old implementation with an overflow interrupt for the clock and a comparator interrupt for stepping, had an unsolvable bug: If the comparator interrupt should happen very shortly after the overflow interrupt the comparator interrupt would miss. And with 2 comparators the implementation is more straightforward.
2011-02-10 19:53:58 +11:00
c5901cb04d
missed a semicolon
...
Reported-by: jgilmore
2011-02-09 13:55:04 +11:00
71eafbf96b
keep power on when heaters are active
...
Reported-by: Jacky2K@forums.reprap.org
2011-02-09 08:16:15 +11:00
fc57cfc5de
Add Extruder.pde, so extruder is compilable with Arduino IDE
2011-02-09 07:48:29 +11:00
7f32aa80bb
G28: home all axis if no axis is selected
2011-02-09 07:47:55 +11:00
398f68e2db
make *_MIN_PIN defines optional
2011-02-09 07:47:41 +11:00
aec41c59aa
gcode_process and pinio need to include config.h
...
Signed-off-by: Michael Moon <triffid.hunter@gmail.com>
2011-02-09 07:46:04 +11:00
02e30dcb0a
add sd.c for future, currently unused
2011-02-08 22:37:17 +11:00
d5033895b2
Fix timer for high speeds.
2011-02-08 21:57:58 +11:00
8ebce94e4d
add soft limits to configs
2011-02-08 19:03:21 +11:00
4da63d31ff
fix homing code
2011-02-08 17:53:42 +11:00
0110af2ede
preliminary homing code- not linked into anything yet
2011-02-08 17:52:51 +11:00
47a23317be
allow home-to-max setups
2011-02-08 17:52:32 +11:00
5118f788d2
preliminary support for soft-limits
2011-02-08 17:52:10 +11:00
5df49c2d3e
allow DEBUG and BANG_BANG at the same time
2011-02-08 14:49:22 +11:00
00fc05a49b
fix timer bug- if delay is smaller than TICK_TIME but counter has passed delay when timer is set, it will wait a whole TICK_TIME before firing instead of setting comparator to fire at correct time
...
check next_step_time instead of delay in comparison
Reported-by: Markus Amsler <markus.amsler@oribi.org>
2011-02-08 09:43:50 +11:00
553f3a50a6
some config templates, also bang-bang heater support to reduce code size
2011-02-07 20:48:57 +11:00
b5299c4d69
protect ANALOG_MASK from arithmetic errors via de-macro-isation
2011-02-07 20:47:32 +11:00
e4fc55289b
use constants for conditional compilation since preprocessor can't work out enums and we can't define in macros
2011-02-06 21:34:44 +11:00
1c723f7656
remove definition macros, doesn't work
2011-02-06 21:11:39 +11:00
d1b2754aba
sorting out preprocessor interactions
2011-02-06 21:11:39 +11:00
97f344f0fa
changes discussed in chat on pull 19
2011-02-06 21:11:39 +11:00
fe034d5e35
graycode stepper operation, distilled to one line in dda.c
...
Which includes a seperate file (graycode.c) with the defines and additional variable declaration.
I went with the "graycode" spelling, as there's about ten times as many hits for that as for "greycode" on google. I've read that both spellings are acceptable, but whatever.
Signed-off-by: Michael Moon <triffid.hunter@gmail.com>
2011-02-06 16:42:08 +11:00
021ac75e2f
Fix typo in x_min
2011-02-05 13:33:26 +11:00
4ed24d4507
move Echo on/off to M240/M241
2011-02-04 12:08:52 +11:00
1815ab1ef7
make it even harder to unintentionally include fuse definitions
2011-02-04 11:04:15 +11:00
d88179a9ce
Makefile: Remove .eeprom .fuse .lock sections from hex file.
...
Signed-off-by: Michael Moon <triffid.hunter@gmail.com>
2011-02-04 11:00:45 +11:00
fa91ef8472
fix thermistor lookup table interpolation code
...
Signed-off-by: Michael Moon <triffid.hunter@gmail.com>
2011-02-02 18:23:10 +11:00
f1b526696b
forgot to rename type
2011-02-01 19:40:28 +11:00
fcaa76d3c0
Simpler definition of temp sensors and heaters.
2011-02-01 19:40:27 +11:00
14809c4a7c
make bed heater define zero-based
2011-01-27 21:03:26 +11:00
0ab6e0bb6e
Added Arduino Mega2560 support to arduino.h
...
Signed-off-by: plasmator <public@plasmatoruniversi.com>
Signed-off-by: Michael Moon <triffid.hunter@gmail.com>
2011-01-27 20:31:40 +11:00
80e98e9b22
Added Heated Bed Support
...
Signed-off-by: plasmator <public@plasmatoruniversi.com>
Signed-off-by: Michael Moon <triffid.hunter@gmail.com>
2011-01-27 20:31:39 +11:00
7b29beb127
clarify/expand PWMable pins and mappings in config.h.dist
2011-01-26 11:43:52 +11:00
007d3c9736
initialise 16-bit timers on the mega1280 correctly
2011-01-25 12:47:22 +11:00
a98886d236
Correctly set AIO_DDR register
...
Signed-off-by: Michael Moon <triffid.hunter@gmail.com>
2011-01-24 11:32:00 +11:00
4febbea2f8
fix decfloat_to_int, Less divisions in decfloat_to_int.
...
Signed-off-by: Michael Moon <triffid.hunter@gmail.com>
2011-01-11 19:20:17 +11:00
c364e8f873
disable fuses by default
2011-01-11 16:42:12 +11:00
1fa0036008
fix arithmetic error
2011-01-10 10:15:42 +11:00
719a9d32b5
gcode_parse.c: Limit the digits right of the decimal.
...
Previously, variables in decfloat_to_int() could overflow due to
excess precision, like Z2.0000000.
2011-01-08 12:15:13 +11:00
e44954b333
Merge branch 'master' into release-candidate-triffid
2011-01-08 00:09:37 +11:00
266c6ee0e2
merge release-candidate-triffid
2011-01-07 23:29:32 +11:00
56ce863024
fix typo
2011-01-07 23:13:00 +11:00
a0ec032fd7
Merge branch 'release-candidate-triffid' into release-candidate-local
2011-01-07 23:11:01 +11:00
319468c707
fix typo
2011-01-07 23:10:24 +11:00
096d7dfdf3
Merge release-candidate-triffid branch
2011-01-07 23:09:13 +11:00
24e95f0707
fix typo
2011-01-06 18:22:17 +11:00
Nirav Patel
Michael Moon
Markus Amsler
Jacky2k
John Gilmore
Vik Olliver
Stephan Walter
plasmator
madscifi
Markus Hitter