josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7,677 Commits 31 Branches 140 Tags 71 MiB
Commit Graph

5881 Commits

Author SHA1 Message Date
gudnimg 06d34b4398 Fix an issue where print can't be stopped under specific circumstances 
There is a bug where if the printer is recovering a print, it run a
blocking loop to restore the extruder and bed temperatures.
But if a Fan error is triggered in this loop, then the user can't
abort the print via LCD.

If the fan error resolves on its own the 'Resume print' menu will
appear in a few seconds. But if not, then the user can't resume the print
(which is normal). But with the bug above the user can't abort the print either!

The problem is essentially isPrintPaused variable is cleared too early.
We should wait until the print is completely restored first.

Steps to reproduce:
1. Start a print
2. Pause the print
3. Wait for extruder temperature to fall at lest 180°C
4. Click 'Resume' print
5. While heating, stop the hotend fan and wait for a few seconds until an error is raised
6. Observe issue => 'Stop print' menu item is gone!

PFW-1542
 2023-09-23 14:18:52 +00:00
3d-gussner f8c64de505
Merge pull request #4390 from sarusani/mbl_mag_comp 
MBL: Add magnet compensation parameter
 2023-09-22 14:57:09 +02:00
Guðni Már Gilbert e323490659 optimisation: Remove unused Z offset 
Frees up some SRAM

Change in memory:
Flash: 0 bytes
SRAM: -4 bytes
 2023-09-19 23:37:38 +00:00
3d-gussner 1996f977e1
Merge branch 'MK3' into mbl_mag_comp 2023-09-18 15:55:42 +02:00
3d-gussner 8bd71b7bf0
Merge pull request #4391 from sarusani/mbl_default_to_eeprom 
MBL: Default to EEPROM values
 2023-09-18 15:52:38 +02:00
D.R.racer 0f1cb4f407 Fixup from review 2023-09-18 10:51:32 +02:00
gudnimg 4134bf4f40 8-bit proposed changes 
The status line code is not nice, but we need to work around it
so the status line rendering works correctly

This commit mostly reapplies the code
from 3.13.2

Also fixes compiler warnings
 2023-09-18 10:51:32 +02:00
D.R.racer ea01012026 Unify MMU operations' workflow 2023-09-18 10:51:32 +02:00
D.R.racer a02ff0651c Return try-load reporting to serial 2023-09-18 10:51:32 +02:00
D.R.racer 59e49c80f9 Sync MK3<->MK4 MMU2 Tune, Buttons, PowerPanic hooks refactoring 2023-09-18 10:51:32 +02:00
D.R.racer 9b48ab729a Sync MK3<->MK4 MMU2 TryLoadUnloadReporter 2023-09-18 10:51:32 +02:00
D.R.racer 7db7250773 Sync MK3<->MK4 MMU2 mmu2_mk4.cpp formatting 2023-09-18 10:51:32 +02:00
D.R.racer be5523187b Sync MK3<->MK4 MMU2 mmu2_mk4.h 2023-09-18 10:51:32 +02:00
D.R.racer 075858c9fa Sync MK3<->MK4 MMU2 reporting 2023-09-18 10:51:32 +02:00
D.R.racer 5235fe2480 Sync MK3<->MK4 MMU2 marlin macros 2023-09-18 10:51:32 +02:00
D.R.racer b4b0bba11c Sync MK3<->MK4 MMU2 marlin interface 2023-09-18 10:51:32 +02:00
D.R.racer eb7a73e748 Sync MK3<->MK4 MMU2 log 2023-09-18 10:51:32 +02:00
D.R.racer fd9f4ffb9e Sync MK3<->MK4 MMU2 progress converter 2023-09-18 10:51:32 +02:00
D.R.racer ec4740fe53 Clean-up ProgressCodes and ErrorCodes parameters throughout the code 2023-09-18 10:51:32 +02:00
D.R.racer 717281cd87 Sync MK3<->MK4 MMU2 crc 2023-09-18 10:51:32 +02:00
D.R.racer f235976f26 Sync MK3<->MK4 MMU2 protocol logic 2023-09-18 10:51:32 +02:00
sarusani 84d353793d Fix typos 2023-09-16 12:38:14 +02:00
sarusani e4a10e5fab Move code_seen back into if statement 
Same memory usage, but prettier to look at. :)
 2023-09-15 14:11:27 +02:00
sarusani 56a79f88ef Optimise memory usage 2023-09-15 14:11:27 +02:00
sarusani 2951bc8af0 Default to eeprom values 
Use eeprom values if provided parameters are out of bounds.
 2023-09-15 14:11:27 +02:00
3d-gussner 9e794a47a4
Merge pull request #4386 from 3d-gussner/MK3_mbl_print_area_translations 
🚧  Add new MBL message for #4183 and translation
 2023-09-15 09:00:38 +02:00
sarusani 21c57a1222 Add parameter for magnet compensation 
allow to enable/disable magnet compensation when 7x7 is in use.
 2023-09-14 21:02:56 +02:00
sarusani 2863c9bc01 Cleanup: whitespace in nProbeRetryCount var 2023-09-14 09:43:26 +02:00
3d-gussner 5f605012eb
Merge pull request #4388 from prusa3d/vintagepc/tmc-mode-query 
Add Q parameter to M91[4/5]
 2023-09-14 09:13:55 +02:00
VintagePC 70d83fe4ee Add Q parameter to query current mode. 2023-09-13 16:52:11 -04:00
sarusani a9c8bb7dbf Code cleanup: rename params 2023-09-13 18:31:45 +02:00
sarusani d3bb6e5ca5 Rename MBL repeat param 2023-09-13 17:37:39 +02:00
3d-gussner ca27841d67 Add new MBL message for #4183 and translate these messages 2023-09-13 11:14:16 +02:00
sarusani dc129e0934 Remove obsolete mesh definitions 
Clean up mesh definitions that where made obsolete by #4183
 2023-09-13 10:49:52 +02:00
3d-gussner 2e70697fa7
Merge pull request #4183 from leptun/mbl_print_area 
MBL print area
 2023-09-13 10:28:08 +02:00
3d-gussner 0aa380b931
Merge pull request #4206 from gudnimg/sd-card-menu-opt 
optimisation: `menu_item == menu_line` is always true in `menu_item_sddir()` and `menu_item_sdfile()`
 2023-09-13 07:49:43 +02:00
3d-gussner 73118dd4e2
Merge pull request #2474 from vintagepc/#2161-tune-x-y-rehome 
Add X-Y home to tune menu if print is paused
 2023-09-13 07:49:23 +02:00
3d-gussner f5d48cd029
Merge pull request #4342 from gudnimg/optimsation_timer_class 
optimisation: Timer constructor can be `constexpr`
 2023-09-13 07:48:43 +02:00
vintagepc b7daac3b70 Direct home instead of G28 2023-09-12 18:41:14 -04:00
vintagepc b75e3b5233 facepalm commit 
... I somehow managed to lose a bracket. DERP.
 2023-09-12 18:33:27 -04:00
vintagepc ebc6663210 Add auto-home to tune menu 2023-09-12 18:33:27 -04:00
Guðni Már Gilbert ff6fd8cf4b Allow statistiscs menu while running 1st Layer cal 
There is no problem with opening the menu during first layer
calibration. Removing this condition simplifies the code a little bit.

Change in memory:
Flash: -8 bytes
SRAM: 0 bytes
 2023-09-12 20:26:43 +02:00
3d-gussner 74f724b228
Merge pull request #4174 from gudnimg/check_all_heaters 
optimisation: use `CHECK_ALL_HEATERS` in more places
 2023-09-12 16:31:45 +02:00
3d-gussner 019126778d
Merge pull request #1790 from jiri-jirus/MK3 
y-axis self-test hack cleanup
 2023-09-12 16:31:34 +02:00
3d-gussner 5050fd768b
Merge pull request #4150 from gudnimg/psu-delta-typo 
Fix a typo in `PSU_Delta` define
 2023-09-12 16:28:32 +02:00
3d-gussner f5259ee611
Merge pull request #4316 from gudnimg/fix-VERBOSE_CHECK_HIT_ENDSTOPS 
Fix and optimise VERBOSE_CHECK_HIT_ENDSTOPS
 2023-09-12 10:55:25 +02:00
3d-gussner ffbb720d34
Merge pull request #4365 from gudnimg/sync-with-32-bit 
Explicitly use `Buttons` namespace
 2023-09-12 10:53:21 +02:00
3d-gussner c84985ec3e
Merge pull request #4328 from dawidpieper/m850_addselection 
M850 add possibility to set sheet as active
 2023-09-11 13:02:04 +02:00
Yuri D'Elia 334bfe4d29 build: Set all version data based on git tags 
Drop the ALPHA/BETA/custom version handling. Set the version string and
firmware date based on the current tree description which has all the
required details.

Allow to override the repository information via cmake.

Use a truncated commit hash to set the internal commit number for
compatibility.

Rebase and fix issues
 2023-09-04 08:35:15 -04:00
gudnimg e0269d6f6a Explicitly using Buttons namespace 
This change sync the code a little bit with the 32-bit FW

No change in memory
 2023-09-03 12:41:39 +00:00