0b5afa3092
Unload the filament at parked position
...
We don't want to unload while the nozzle is still smudged against the bed.
2024-11-18 09:45:51 +01:00
a0278b2844
Fix an issue where MMU unloads filament while its cooling down
...
Change in memory:
Flash: -6 bytes
SRAM: 0 bytes
2024-11-18 09:45:51 +01:00
d1470d8abc
New first layer calibration
...
- changed to relative mode to save buffer and code size
- added NEW_FIRST_LAYER_CAL to perform 1st layer cal from front to back
2024-11-14 14:45:25 +01:00
d8d058a63b
Add Set parameter in M78 Statistics gcode ( #4809 )
...
* Add Set Statistics
* EEPROM_FILAMENTUSED is in centimeter and not meter
Fix few things
* Fix typo
2024-11-14 08:20:39 +01:00
0fb17b1643
Merge pull request #4805 from 3d-gussner/MK3_Fix_MMU
...
Remove hardcoded MMU tool count
2024-11-10 11:56:55 +01:00
cdb6635eac
Remove hardcoded MMU tool count
...
- Preload to MMU -> All
- Loading Test -> All
- SpoolJoin
2024-10-29 15:50:01 +01:00
ef3527eb0f
Merge pull request #4782 from 3d-gussner/MK3_3141_po
...
Update po files
2024-09-24 16:45:16 +02:00
21084af026
Update po files
2024-09-24 16:37:43 +02:00
24bfa8db59
Merge pull request #4780 from leptun/MBL_relax_tight_thresholds
...
Further relax the MBL tight threshold
2024-09-24 13:47:02 +02:00
f12683f3ff
Further relax the MBL tight threshold
2024-09-24 10:33:23 +02:00
aa4de7ae7e
Merge pull request #4773 from 3d-gussner/MK3_fix_unload
...
PFW-1561 Fix MMU unload issue
2024-09-23 07:39:18 +02:00
402b9ed93a
Add `#ifdef FANCHECK` thanks @gudnimg
2024-09-23 07:00:17 +02:00
65a26e882b
Enable Tune menu during fan check issues, user can then disable the fan check if needed.
...
Send //action:cancel when LCD Stop print is selected.
2024-09-18 16:09:46 +02:00
29c920c801
Fix MMU unload issue after a fan check issue has been solved
2024-09-18 16:09:46 +02:00
ab5c7ac6c6
Merge pull request #4772 from gudnimg/FW-1562
...
PFW-1562 Fix an issue where safety timer is not handled correctly in `mFilamentPrompt` menu
2024-09-17 16:30:37 +02:00
de092b35d5
PFW-1562 Fix an issue where safety timer is not handled correctly in mFilamentPrompt menu
2024-09-15 10:28:10 +00:00
5aa67489da
Merge pull request #4768 from 3d-gussner/MK3_3141_test_prep
...
Prepare FW 3.14.1 for testing
2024-09-04 09:54:21 +02:00
7d3032c001
Bump up version to FW3.14.1-RC1-8225
2024-09-04 09:33:47 +02:00
2c621e025a
Update pot and po files
2024-09-04 09:32:30 +02:00
6ea47967da
Merge pull request #4765 from leptun/MBL_fixes
...
Region MBL fixes
2024-09-04 07:42:48 +02:00
4e9e20c67f
Merge pull request #4766 from gudnimg/remove-sm4_line_xyze_ui
...
Remove sm4 line xyze UI
2024-09-03 15:22:56 +02:00
2fed2f00f7
Update Czech translation
...
Thanks to @DRracer
2024-09-03 13:27:53 +02:00
1c0a59f7c9
Update Hungarian translation
...
Thanks to @AttilaSVK
2024-09-03 11:47:14 +02:00
3facdb4576
Add new message and translations
2024-09-03 09:34:18 +02:00
cb502ee7bc
Update MSG_MBL_FAILED translations
...
Thanks @3d-gussner
2024-09-03 09:28:16 +02:00
b614b9c43d
Do not prompt for steel sheet on bed during XYZ calibration
...
Thanks @3d-gussner
2024-09-03 09:28:16 +02:00
b58d2ecccb
Prompt user for Z calibration after failed MBL with yes-no screen
2024-09-03 09:28:15 +02:00
357b68cf76
Ask for steel sheet on bed during Z calibration
2024-09-03 09:28:15 +02:00
d2119c24e1
Prompt Z calibration when 7x7 MBL is enabled
2024-09-03 09:28:15 +02:00
8196e48684
Reduce number of Z realignments before Z calibration is requested
2024-09-03 09:28:15 +02:00
d8e3c2b481
Relax 3x3 MBL threshold
2024-09-03 09:28:15 +02:00
83c43fba02
Merge pull request #4767 from gudnimg/linearity-correction-opt-v2
...
optimisation: Simplify saving linearity correction
2024-09-02 11:18:44 +02:00
b3a682d330
Always re-init the TMC drivers after leaving linearity correction menu
...
Change in memory:
Flash: -22 bytes
SRAM: 0 bytes
2024-09-01 22:14:25 +00:00
312f79c5f5
optimisation: Simplify saving linearity correction
...
Keep in mind that the EEPROM addresses are in descending order. This means we
can't use eeprom_read_block() or eeprom_update_block()
Address --> Axis
3831 --> X-axis
3830 --> Y-axis
3829 --> Z-axis
3828 --> E-axis
Change in memory:
Flash: -118 bytes
SRAM: 0 bytes
2024-09-01 12:34:00 +00:00
aa8569600c
Fix build and make sm4 a C++ file
2024-09-01 12:12:24 +00:00
a2d45e5d11
cleanup: remove unused global sm4_cpu_time
2024-09-01 12:11:56 +00:00
f115adf894
cleanup: remove unused function sm4_get_dir
2024-09-01 12:11:56 +00:00
5a5c68f563
cleanup: remove unused function sm4_get_dir_bits
2024-09-01 12:11:56 +00:00
7d3c416d04
cleanup: remove unused function sm4_line_xyze_ui
...
No change in code size. Reason for removing this function
is just to reduce lines of code that is maintained.
2024-09-01 12:11:22 +00:00
6c99a4463e
Merge pull request #4755 from sarusani/AddLoadIfAutoloadDisabled
...
Add "load filament" if autoload is disabled
2024-08-30 17:11:37 +02:00
a259482b6b
Add load option if autoload is disabled
2024-08-30 14:48:45 +02:00
923f926223
Merge pull request #4749 from gudnimg/remove-auto-bed-leveling
...
Remove legacy Auto Bed Leveling code
2024-08-30 10:44:50 +02:00
d3c326de99
Merge pull request #4727 from gudnimg/improve-missing-filament
...
PFW-1559 Add filament presence check at start of print
2024-08-30 10:44:05 +02:00
af6fbb13de
Merge pull request #8 from 3d-gussner/MK3_fix_PR4727
...
Fix LCD output and add translations
2024-08-30 08:35:27 +00:00
56de4bf53b
Update Community translation list
...
- Croatian, Swedish and Norwegian are inactive since the last few translation review requests have not been done
2024-08-30 08:14:23 +02:00
b9b32b0d9f
Update Slovak translation
...
Thanks to @ingbrzy @shatter136
2024-08-28 12:07:20 +02:00
6af6b402cc
Update Czech and Italian translations
...
Thanks to @DRRacer and @wavexx
2024-08-28 11:29:28 +02:00
1a717986c1
Update Hungarian translation
...
Thanks to @AttilaSVK
2024-08-27 07:11:32 +02:00
6fa80045b5
Another Dutch translation fix
2024-08-26 14:15:31 +02:00
ff9a476121
Update Dutch translation
...
Thanks to @stelgenhof
2024-08-26 14:13:28 +02:00
gudnimg
3d-gussner
Alex Voinea
sarusani