2216ba9fbf
M600: Ask for which slot to use when loading
...
This fixes an issue where the assumed slot to use is unknown and
the printer will hang on loading filament 100.
Another good thing is this is an old user feature request which
we have in our 3.12 milestone.
Change in memory:
Flash: +14 bytes
SRAM: -1 bytes
2022-09-16 10:23:47 +02:00
3e86bbb93f
M600: Don't unload if filament is unknown
...
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2022-09-16 10:23:47 +02:00
05bf5de518
Fix calibrate_z_auto crashing Z-axis
...
Steps to reproduce:
1. Run M45 Z after booting the printer up
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2022-09-16 10:23:47 +02:00
03b8a6e464
Use raise_z in more places
...
Change in memory:
Flash: -474 bytes
SRAM: 0 bytes
2022-09-16 10:23:47 +02:00
4758ac3f1b
PFW-1399 Don't show cut filament menu if setting is not enabled
2022-09-16 10:23:47 +02:00
55d2eaf8c0
M706: Only cut filament if the setting is enabled
2022-09-16 10:23:47 +02:00
66994d010d
Fix a few cases where rebase overwrote stuff
2022-09-16 10:23:47 +02:00
0537908d8c
Fixup 2
2022-09-16 10:23:47 +02:00
37b50477cd
Fixup after rebase onto MK3
2022-09-16 10:23:47 +02:00
18423685b6
Cleanup ExpectsResponse usage
2022-09-16 10:22:39 +02:00
d5377c1781
Remove extra "scopeState = ScopeState::FINDAReqSent"
...
saves ~20B in total
2022-09-16 10:22:39 +02:00
e205d0ee2f
Autoretry Idle scope: transf. into Finished, should stay in Processing
2022-09-16 10:22:39 +02:00
78cbea08e6
Fix pgm_read* usage
2022-09-16 10:22:39 +02:00
6c0d3b0b78
Optimize MMU protocol logic
2022-09-16 10:22:39 +02:00
05ad1dc2f6
Refactoring of protocol logic to lower RAM consumption
...
Should also place the statistics request to the right spot in the state machine.
2022-09-16 10:22:39 +02:00
dfddf3eaa5
Initial commit for MMU statistics
2022-09-16 10:22:39 +02:00
2616df66af
PFW-1386 st_get_position_mm() is more accurate when using endstops (not homed printer)
...
If the endstops kick in, then st_get_position_mm shows the actual travel distance. current_position[Z-AXIS] does not get updated correctly thus we cannot use it when unhomed.
current_position[Z-AXIS] is later set to Z_MAX_POS,
we cannot use that either to calculate the travel distance
2022-09-16 10:22:39 +02:00
f409426bdc
PFW-1386 Refactor raise_z
...
Removed the "plan" parameter.
We were incorrectly returning from the function if the printer was homed,
but plan = false. This would leave current_position with an incorrect value
If the printer is homed => finish the move and return the travel distance
If the printer is not homed => rely on end stop to prevent damage,
return travel distance even if the endstop stopped the move.
2022-09-16 10:22:39 +02:00
4a1479b5bc
PFW-1386 Clamp Z-axis when homed
2022-09-16 10:22:39 +02:00
fa6e30389a
PFW-1386 Add a TODO
...
When recovering the Z-axis in M600, we'd like the Z move to
happen after the XY move.
2022-09-16 10:22:39 +02:00
0a90c7ffda
PFW-1386 Use Marlin 2 unload sequence for single material
...
The current unload sequence does not give good results.
The Marlin 2 sequence looks good on my end. This can be later
used to improve M600
Added all the constants from Marlin 2
2022-09-16 10:22:39 +02:00
ff91b4670d
PFW-1386 Use same code for Z-lift in M600 as in M701/M702
...
This reduces flash usage by 128 bytes!
2022-09-16 10:22:39 +02:00
099c3a1f1f
PFW-1386 fixup
2022-09-16 10:22:39 +02:00
38952f1f33
PFW-1386 Optimisation: st_synchronize is not needed after raise_z_above
...
Saves 16 bytes of flash
2022-09-16 10:22:39 +02:00
214b6a9220
PFW-1386 M701, M702: Move Z-axis using relative position
...
* Created a new function raise_z() which will move the Z axis by some
X millimeters. If plan = false, the function will return the
actual travel distance since the move is blocking.
* raise_z_above() is refactored to call raise_z()
Now the M701 and M702 will move the Z-axis relatively, and also
when done, revert the Z axis position when done.
This is a similar behavior as in Marlin 2.
2022-09-16 10:22:39 +02:00
217b537961
PFW-1386 Remove old debug message to save space
...
Saves 34 bytes of flash
2022-09-16 10:22:39 +02:00
bb0bbfb45f
PFW-1386 Minor correction to M707 and M708 useage example
2022-09-16 10:22:39 +02:00
d78c575399
PFW-1386 Address should accept hexidecimal values
...
Now these are equal:
M707 A255 C1
M707 A0xFF C1
Both address inputs are interpreted as FF
2022-09-16 10:22:39 +02:00
ba7dae5c79
PFW-1386 I don't see a reason for these lines
...
So I'm removing them
2022-09-16 10:22:39 +02:00
3192a95e78
PFW-1386 Optimise default value assign z_target
2022-09-16 10:22:39 +02:00
20c865c2d4
PFW-1386 Implement 'U' parameter for M702
...
Similar to 'L' in M701, this does not apply to the MMU
The U parameter controls how much mm the extruder will unload
Default value is 80mm
2022-09-16 10:22:39 +02:00
7e9166976f
PFW-1386 Implement 'L' parameter for M701
...
It is only used when the MMU is disabled. With the MMU we use a defined ramming sequence.
When the MMU is disabled I borrowed the usages from Marlin 2.
The L parameter only defines the length for the "fast" load length.
Default value is 70mm, same as M600
2022-09-16 10:22:39 +02:00
94dd4aec73
PFW-1386 M701 now loads to nozzle with MMU
2022-09-16 10:22:39 +02:00
8462b38446
PFW-1386 Create a common function for M704 to M706
...
Saves 36 bytes of flash
2022-09-16 10:22:38 +02:00
d6564d3617
PFW-1386 if automatic = false, raising Z-axis is done via gcode
2022-09-16 10:22:38 +02:00
32ec1587b9
PFW-1386 Implement changes to M702
2022-09-16 10:22:38 +02:00
9b0d89213b
PFW-1386 Raising Z-axis during M701 is now done via Gcode
...
If the Z-parameter is not issued, then default behavior will raise
the Z-axis by MIN_Z_FOR_LOAD
2022-09-16 10:22:38 +02:00
5bb36546b4
PFW-1386 Implement changes to M701
2022-09-16 10:22:38 +02:00
fb087fc535
PFW-1386 Add M707 and M708
...
WriteRegister and ReadRegister function will create new compiler
warnings due to unused parameters, we can ignore it for now.
2022-09-16 10:22:38 +02:00
3664d29b21
PFW-1386 Add M709
2022-09-16 10:22:38 +02:00
de0539b630
PFW-1386 Implement M704, M705, and M706
2022-09-16 10:22:38 +02:00
70532333dc
Optimize filament sensor implementation
...
- remove virtual methods (we only have one fsensor implementation at a time)
- comment out some of the debugging texts
- remove volatile and replace them with proper synchronized access to relevant variables
2022-09-16 10:22:38 +02:00
2662e09f1e
Another message remove from RAM
2022-09-16 10:22:38 +02:00
0e036b9d8a
Save some more RAM in protocol_logic
2022-09-16 10:22:38 +02:00
022aa53b2d
Remove active_extruder completely
...
we only use 1 extruder + saves ~800B
2022-09-16 10:22:38 +02:00
0889109760
Fix corrupted chars in "Engaging Idler" message
2022-09-16 10:22:38 +02:00
bac3168ca4
Optimise power_on and power_off
...
eeprom_update_byte only updates the EEPROM if the value is different
Saves 40 bytes of flash memory
2022-09-16 10:22:38 +02:00
0d64cfa2e5
extruder variable should be one byte
...
Saves 1 byte of SRAM and 132 bytes of flash
2022-09-16 10:22:38 +02:00
87a4f58e66
PFW-1363 Change MMU Error parking position
2022-09-16 10:22:38 +02:00
703c463a49
Optimize unload
...
Toolchange during print is now much quieter.
Excessive E-motor movement during print is now gone
2022-09-16 10:22:38 +02:00
Guðni Már Gilbert
D.R.racer