josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7,036 Commits 31 Branches 140 Tags 71 MiB
Commit Graph

33 Commits

Author SHA1 Message Date
3d-gussner 235c4ae943 Do not `MSG_BTN_MORE` translate 2023-03-14 08:26:39 +01:00
DRracer e787111922
Add MMU error code: MCU_UNDERVOLTAGE_VCC (#4069) 
+ read bandgap voltage periodically
+ correct wording of ERR_ELECTRICAL_MCU_UNDERVOLTAGE_VCC (as requested in Prusa-Error-Codes PR#81)
 2023-03-08 15:42:25 +01:00
D.R.racer c826ae989f Remove Done button on FINDA-related MMU error screens 
Follows the requirements from Prusa-Error-Codes yaml definition.
Saves a fwe bytes as well as the button switch() statement got simplified.

PFW-1494
 2023-02-10 14:38:18 +01:00
D.R.racer 3ddc2cf86d Add ResetMMU and DisableMMU buttons to specific error screens 
- MMU not responding/Communication error: add DisableMMU
- MMU FW update needed: add ResetMMU

Flash: +8B
RAM: +0B
 2023-02-08 06:48:11 +01:00
D.R.racer d2f3835b2c Fixup after review 2023-01-31 09:35:22 +01:00
D.R.racer ec1d12d929 Introduce FILAMENT_EJECTED + tune Eject operation + inc. MMU ver. 2.1.6 2022-12-30 14:23:44 +01:00
D.R.racer d4f0f363cd Fixes from tests 
- introduce Cut Filament
- limit retries try-unload
- fix waiting in "Load to extruder failed" error screen
- add LOAD_TO_EXTRUDER_FAILED error definition
 2022-12-30 14:23:44 +01:00
Guðni Már Gilbert fb530ce543 PFW-1454 Send button to MMU on MMU SELFTEST FAILED screen 
Fixes an issue where the button on the MMU error screen doesn't do anything
when MMU SELFTEST FAILED is rendered
 2022-12-04 11:04:00 +00:00
D.R.racer 6059398004 Introduce MMU Error: INSPECT_FINDA (FINDA_FLICKERS) 2022-11-17 07:58:11 +01:00
3d-gussner 7c009cadb8 Bump up Revision to ALPHA1 6051 
Temporary fix for MSG_BTN_MORE
pre-release pot and po update
 2022-11-04 10:21:39 +01:00
3d-gussner f4a2c1c794 Update translations 
Fix button msg
Update Dutch `F. jam detect`
 2022-10-25 10:29:35 +02:00
D.R.racer 6eab0dda59 Add parentheses - be more explicit in error codes' masking and comparison 2022-10-11 15:51:01 +02:00
D.R.racer ebb79351a7 Add preliminary support for MMU_SELFTEST_FAILED error messages 2022-10-11 15:51:01 +02:00
Yuri D'Elia 398a4bf403 cleanup: Do not return const values from functions 
This generates a warning under -Wextra, since in most cases a const
value doesn't prevent buggy code (as copies are allowed) while
preventing some optimizations (such as move operations) to take place.
 2022-09-30 12:55:47 +02:00
Guðni Már Gilbert 25a7dc8397 Fix: Filament Already Loaded only has two buttons 2022-09-17 16:36:09 +02:00
Guðni Már Gilbert 15a8c8fe37 Fix: Unload Manually did not send any button to the MMU 2022-09-17 16:36:09 +02:00
Guðni Már Gilbert 9b4a621275 Fix: Fsensor errors only have one reset button 2022-09-17 16:36:09 +02:00
3d-gussner 89a03c1f0d MMU2/lang: Update translatable strings to match our extraction macros 2022-09-16 19:02:04 +02:00
D.R.racer f18721bee3 Fix unintentional typo 2022-09-16 10:22:38 +02:00
D.R.racer c412f062c8 Perform 3xRetry automatically 
This is a draft PR showing the potential 3x retry implementation on the printer's side.
It is much less code and looks more reliable than the same functionality in the MMU FW.

Still, more work needs to be done:
- [ ] Button is sent to the MMU even before returning from the parking position
- [ ] Then the button is sent again
- [ ] Then the printer runs out of retryAttempts

We need to find a better spot to check for "automatic" retry and issuing of the buttons
 2022-09-16 10:22:38 +02:00
VintagePC f155c7664d Add missing CheckUserInput calls, fix bad array entry for FW_update 2022-09-16 10:22:38 +02:00
VintagePC 888a37450b Fix wrong return 2022-09-16 10:22:38 +02:00
VintagePC 73c486cc2f - Fix DisableMMU button on FW incompat 
5823c14
- Implement eeprom var, fix reset
 2022-09-16 10:22:38 +02:00
D.R.racer 236098dbca Make init MMU error screens send buttons (Idle mode) 2022-09-16 10:22:38 +02:00
D.R.racer 5082da78d2 Convert button on LCD into button for MMU 
- Dependent on current MMU error being processed
- Includes rename of LEFT_BUTTON_CHOICE -> LCD_LEFT_BUTTON_CHOICE (and right, middle as well) to avoid confusion with MMU buttons' ordering
 2022-09-16 10:22:38 +02:00
D.R.racer 8a92865969 Update MK3S to match MMU PR#168 
- new progress and error codes
- remove #error from mmu2_power.cpp as it makes no sense
- remove temporary error translation code
 2022-09-16 10:22:37 +02:00
D.R.racer 87ed42ba9b Fix FW update needed button order 2022-09-16 10:22:37 +02:00
D.R.racer 68b007c759 Fix compile-time conversion MMU2 ErrorCode -> Prusa-Error-Code 
and hide some of the implementation details into mmu2_error_converter.cpp
which makes the code in mmu_reporting.cpp much easier to read.
 2022-09-16 10:22:37 +02:00
D.R.racer c28354bf92 Update error codes + constexpr FindErrorIndex 
Beware - requires avr-gcc 7.3!
 2022-09-16 10:22:37 +02:00
Guðni Már Gilbert dcebad21c8 Add missing spaces to ErrorCode messages 
Such that:
MMU2:E=32766ErrorTitleTextDescription
Becomes:
MMU2:E=32766 ErrorTitle TextDescription

Also simplified the process of combining ErrorTitle and TextDescription
into the msg buffer by using snprintf. This is saver since we only
use dstSize in one place instead of two.
 2022-09-16 10:21:53 +02:00
Guðni Már Gilbert 6fab95f145 Fix PROGMEM read in ErrorCode message 
This could cause the printer to crash. The Serial Stream would show
a garbled string.

Also included in this commit:
* The buffer size is increased from 64 bytes to 192 bytes.  We need to
take into account the length of the ErrorTitle and ErrorDescription.
* Fix overwrite in ErrorCode message buffer.
 2022-09-16 10:21:53 +02:00
D.R.racer 87d9f9aba7 Introduce MMU errors + their texts 2022-09-16 10:21:53 +02:00
D.R.racer 2e293e90a0 MMU2 interface overhaul 
First port of the new MMU2-printer interface into 8bit FW.
 2022-09-16 10:21:53 +02:00