josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7,483 Commits 31 Branches 140 Tags 71 MiB
Commit Graph

7483 Commits

Author SHA1 Message Date
3d-gussner 2ab9cbcd83
Merge pull request #923 from cwei/patch-1 
Fix upper limit for x
 2023-08-02 12:05:38 +02:00
3d-gussner ce013b35c9
Merge pull request #4298 from wavexx/lcd_tm_cal_fix 
TM: Fix TM calibration from the Calibration menu
 2023-08-01 16:34:00 +02:00
Yuri D'Elia baacc0ec53 TM: Fix TM calibration from the Calibration menu 
After dece5d268f, running the thermal
model itself switches the printer to "active", preventing a calibration
run from the LCD to start.

Explicitly allow LcdCommands::ThermalModel in this case.
 2023-08-01 11:54:10 +02:00
3d-gussner 1030a3ab1d
Merge pull request #4283 from gudnimg/power-panic-fix-m600 
m600: power panic: unset isPartialBackupAvailable on M600 exit
 2023-07-31 12:10:06 +02:00
Guðni Már Gilbert a96ee9da62 m600: power panic: unset isPartialBackupAvailable on M600 exit 
If no power panic occurred during M600 we should
clear isPartialBackupAvailable to let the power panic
code know to not use the partial backup. We want the
partial backup ONLY when the extruder is parked after a print is saved.

Change in memory:
Flash: +4 bytes
SRAM: 0 bytes
 2023-07-27 16:55:08 +00:00
3d-gussner 320997a1f5
Merge pull request #3859 from wavexx/simplify_variant_names 
Simplify variant names
 2023-07-27 15:44:58 +02:00
3d-gussner 07d7bfa8a4
Merge pull request #4053 from vintagepc/2477-redux 
#2477 Improved M-code control for stealth mode/normal mode
 2023-07-27 15:44:22 +02:00
vintagepc a2eafc587a
Merge branch 'MK3' into 2477-redux 2023-07-26 12:34:38 -04:00
3d-gussner 8d66a2864f Simplify REVO variants 2023-07-26 16:46:17 +02:00
Yuri D'Elia caf3f2dec6 README: Update example target name 2023-07-26 16:42:13 +02:00
Yuri D'Elia c093bac4bc build: Update variant names in the legacy build system 
Fix rebase conflicts
 2023-07-26 16:42:02 +02:00
Yuri D'Elia a73fdec4ef cmake: Remove prefix/suffix exceptions 
Now handled by having shorter variant names
 2023-07-26 16:40:26 +02:00
Yuri D'Elia cb8f68192a build: Simplify variant names 
- Remove nozzle size and heater type
- Also remove board type from MK3/MK3S
 2023-07-26 16:40:26 +02:00
3d-gussner ce141a2fa1
Merge pull request #3564 from wavexx/fil_loading_state 
Filament loading state fixes
 2023-07-26 16:38:29 +02:00
3d-gussner cc84e326fe
Merge pull request #4224 from 3d-gussner/MK3_Rename_Thermal_model 
Rename temp model to thermal model
 2023-07-26 16:37:48 +02:00
3d-gussner 897d05d268 Fix @wavexx complains 2023-07-26 09:33:16 +02:00
3d-gussner 6feab85252 Rebase update REVO and solve @wavexx comments 2023-07-25 17:24:02 +02:00
3d-gussner 8ae0e1952e Rename `temp_model.h` to `thermal_model.h` 
`/temp_model` to `/thermal_model`
`Temperature_model` to `Thermal_model`
minor format in eeprom.h
 2023-07-25 17:13:07 +02:00
3d-gussner 940b18e0b2 Format `eeprom.h` doxygen documentation 2023-07-25 17:13:07 +02:00
3d-gussner a6b209d36d Rename `Temperature Model` to `Thermal Model` 
`Temperature model` to `Thermal model`
`temperature model` to `thermal model`
 2023-07-25 17:13:07 +02:00
3d-gussner 78ed427166 Rename `TempModel` to `ThermalModel` 2023-07-25 17:13:07 +02:00
3d-gussner 600a7a0316 Rename `Temp Model` to `Thermal Model` 2023-07-25 17:13:07 +02:00
3d-gussner 44ae8033eb Rename upper case `TEMP_MODEL` to `THERMAL_MODEL` 2023-07-25 17:13:07 +02:00
3d-gussner dac07d11ba Rename lower case `temp_model` to `thermal_model` 2023-07-25 17:13:07 +02:00
Guðni Már Gilbert 780f2db3d1 fixup 2023-07-25 17:10:44 +02:00
Guðni Már Gilbert c647e4cfa4 fix build 2023-07-25 17:10:44 +02:00
Guðni Már Gilbert f40defd2a9 Rename minsegmenttime --> min_segment_time_us 
Also fixed wrong unit in Configuration prinout (M500)
should be us and not ms

Also used %lu format for uint32_t instead of %.2f
 2023-07-25 17:10:44 +02:00
Guðni Már Gilbert 842dcc6560 Remove MAX_E_STEPS_PER_UNIT and MIN_E_STEPS_PER_UNIT 
These constants are not used anywhere so there is no need to rename them
I propose they be removed as cleanup
 2023-07-25 17:10:44 +02:00
Guðni Már Gilbert ec896df62a Remove commented DEFAULT_AXIS_STEPS_PER_UNIT 
They serve no function at this point
 2023-07-25 17:10:44 +02:00
Guðni Már Gilbert 6c95d340c1 Remove dead code axis_travel_steps_per_sqr_second 2023-07-25 17:10:44 +02:00
Guðni Már Gilbert a8c75090b2 Change unsigned long to uint32_t 2023-07-25 17:10:44 +02:00
Guðni Már Gilbert 8689a28776 Rename max_acceleration_units_per_sq_second to max_acceleration_mm_per_s2 2023-07-25 17:10:44 +02:00
Guðni Már Gilbert 21faa52aab Rename axis_steps_per_unit to axis_steps_per_mm 2023-07-25 17:10:44 +02:00
Guðni Már Gilbert ff1cd2bfb2 dcodes: fix build when DEBUG_DCODES is enabled 2023-07-25 15:02:49 +00:00
Guðni Már Gilbert 5b8813bf18 tmc2130: fix octoprint error 2023-07-25 15:02:49 +00:00
Guðni Már Gilbert fa6aae60db optimisation: use SERIAL_PROTOCOLLN 
Change in memory:
Flash: -12 bytes
SRAM: 0 bytes
 2023-07-25 15:02:49 +00:00
Guðni Már Gilbert 9d15a4e63b optimisation: reduce code size in M916, M917, M918 
Change in memory:
Flash: -148 bytes
SRAM: 0 bytes
 2023-07-25 15:02:49 +00:00
Guðni Már Gilbert c090868fa2 optimisation: reduce code size in M907 
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
 2023-07-25 15:02:49 +00:00
Guðni Már Gilbert 53c8bfa928 cleanup: remove unused variable 
No change in memory
 2023-07-25 15:02:49 +00:00
Guðni Már Gilbert 7029af05fa optimisation: reduce code size in pid_extruder() 
Author: leptun

Change in memory:
Flash: -14 bytes
SRAM: 0 bytes
 2023-07-25 15:02:49 +00:00
Guðni Már Gilbert 6623d45af9 optimisation: Tighter LCD timing 
Author: leptun

Change in memory:
Flash: -14 bytes
SRAM: 0 bytes
 2023-07-25 15:02:49 +00:00
Guðni Már Gilbert 5288d615f8 optimisation: lcd avoid streams 
Author: leptun

Change in memory:
Flash: -124 bytes
SRAM: 0 bytes
 2023-07-25 15:02:49 +00:00
Yuri D'Elia 3485c20464 Improve FilamentAction comments 2023-07-25 14:30:20 +00:00
Yuri D'Elia 074b5d380f Consistently replace loading_flag with eFilamentAction 
Remove loading_flag and check for eFilamentAction instead which already
flags both load/unload (in addition to mmu actions).

Correctly transition from AutoLoad to Load as soon as the operation
cannot be cancelled anymore as opposed to resetting it.
 2023-07-25 14:30:20 +00:00
Yuri D'Elia 05b536947b Refuse to start a SD print until filament loading is complete 
Do not blidnly clear the loading_flag, check for it!

Just disallowing the SD menu while loading is being performed is not
sufficient, since the menu can be entered also by inserting card while
loading is taking place.

This is also nicer in behavior, as we allow to navigate the SD card
while loading.
 2023-07-25 14:28:46 +00:00
Yuri D'Elia e3fd6a4902 Do not allow filament actions while an existing one is taking place 2023-07-25 14:28:45 +00:00
Yuri D'Elia 170dddfd71 Set/clear loading_flag also during unload 2023-07-25 14:28:13 +00:00
Yuri D'Elia dece5d268f Consider any lcd_custom_command to be "ACTIVE" 
All custom commands are transitory and eventually switch back to Idle
state by themselves.

It doesn't make any sense to explicitly check for Layer1Cal: any
non-idle state is active by design.

Fix this check in the main menu. This is probably incomplete (Layer1Cal
is incorrectly used in several other places).
 2023-07-25 14:27:00 +00:00
Guðni Már Gilbert 5d880919f8 Align comment 2023-07-25 09:00:47 +02:00
Guðni Már Gilbert d5f4f6700d Optimise the acceleration limit checks 
Kudos goes to Marlin FW

Change in memory:
Flash: -314 bytes
SRAM: 0 bytes
 2023-07-25 09:00:47 +02:00