542677c080
Prevent switching to serial port 1 on miniRambo and such
2021-01-19 13:11:48 +02:00
9b847715ac
Rename F0 to FRM on the status screen
2021-01-19 13:11:25 +02:00
3f5cfc4e61
Move the change filament button to the main menu when farm printing
...
PFW-945
2021-01-19 13:06:23 +02:00
a9d8ddc89c
Farmers' requests 1
...
- remove the UI and related stuff to setting a farm number (the
communication protocol must remain intact)
- remove confirmation after print finished ("Print OK")
Both requests are highly welcome, since they allow for lowering the code
size by >1KB
PFW-963, PFW-927
2021-01-19 09:58:02 +01:00
5c3513a6cc
Merge pull request #2397 from odaki/flashair_display_ip
...
Show the FlashAir IP address
2021-01-08 12:20:12 +01:00
f1f4db0a35
Merge pull request #2850 from 3d-gussner/MK3_PF-build_Fix_EN_ONLY
...
🐛 Fix: PF-build EN_ONLY argument
2021-01-08 12:15:36 +01:00
67ff9b6b48
Fix typos
2021-01-08 11:01:17 +01:00
007e59d23c
Comment out 'sudo' auto installation
...
Add '-?' '-h' help output
2021-01-08 11:37:47 +01:00
584177e8fd
Fix E mask
2021-01-08 10:24:36 +01:00
f549ce690a
Merge pull request #2949 from prusa3d/MK3_3.9.3
...
Merge 3.9.3 back into MK3
2021-01-08 10:20:40 +01:00
3329d34ce4
Fix doxygen issue with "^" and "|" only in one line
...
Doxygen 1.8.13 had no issues but newer doxygen version are failing
to build tables, if a line only consists of "^" and "|"
2021-01-08 09:40:13 +01:00
2764b94558
Updated the dos2unix instructions to no longer be specific to Debian, as unix based distro's being able to handle windows line endings should be considered an exception, and not the rule. Also fixed a few spelling mistakes in the README.
2021-01-08 09:03:33 +01:00
f7dbc70b9c
Added some specific instructions for building firmware with a Debian WSL install. Updated commands to use sudo to avoid permission errors.
2021-01-08 09:03:33 +01:00
0ed6b537a8
Merge branch 'MK3' into MK3_3.9.3
2021-01-07 13:27:51 +01:00
603d704178
Version changed (3.9.3 build 3556)
2021-01-07 12:50:58 +01:00
7e02a7f118
Version changed (3.9.3-RC1 build 3555)
2020-12-26 15:45:34 +01:00
d61cdf2b88
Merge pull request #2932 from espr14/PFW-1165-2
...
Calibration: Turn off speed optimization due to MK2.5 PFW-1165
2020-12-25 18:22:04 +01:00
80e32ce1a5
Turn off speed optimization due to MK2.5
2020-12-25 15:27:42 +01:00
ad68405321
Merge pull request #2931 from 3d-gussner/MK3_3.9.3_SuperPINDA
...
Add SuperPINDA Support for MK2.5/S for MK3_3.9.3
2020-12-23 21:26:37 +01:00
12f4102272
Group PINDA defines
2020-12-23 21:00:02 +01:00
76eb743139
Set default SuperPINDA toggle on MK2.5/S to NO
2020-12-23 20:59:33 +01:00
4b510fef0a
Add PINDA_TEMP_COMP variable to enable SuperPINDA toggle menu/function
2020-12-23 20:59:08 +01:00
a97587f373
Changed PINDA_MINTEMP having own value
...
Prevent bad readings/issues if someone changes the bed thermistor that is "better" with lower min values and creates a custom firmware.
The firmware will now be in the range of the PINDAv2 thermistor independant from the bed thermistor (which may change and need adjustments)
2020-12-23 20:58:44 +01:00
732b6e0cad
Cleanup
2020-12-23 20:58:20 +01:00
62c36f718b
Add SuperPINDA support for MK2.5/S
...
- Changed DETECT_SUPERPINDA to SUPERPINDA_SUPPORT as on miniRAMo the thermistor readings below 30°C
aren't accurate egnough to determine if SUPERPINDA is connected or not
- Add LCD toggle menu Settings -> HW Setup -> SuperPINDA [Yes/No] to overwrite SuperPINDA detection
- If EEPROM_PINDA_TEMP_COMPENSTATION is empty = 0xff then detect SuperPINDA by checking thermistor
- If EEPROM_PINDA_TEMP_COMPENSTAION is 0 then forec enable for temperature compensation menues and functions
- If EEPROM_PINDA_TEMP_COMPENSATION is 1 then force disable for temperature compensation menues and functions
2020-12-23 20:56:50 +01:00
a8ed6cefcf
Merge pull request #2930 from espr14/PFW-1165
...
Calibration: Decrease noise PFW-1165
2020-12-23 19:23:26 +01:00
e6eb3be247
Set jerk = 1, accel. = 1000
2020-12-23 16:56:04 +01:00
979525f028
Add more restarts
2020-12-22 19:34:12 +01:00
25d138d198
Revert max.speed
2020-12-22 15:10:01 +01:00
e24a763e46
Cleanup
2020-12-22 14:45:55 +01:00
8df2eccf45
Remove defines and unused vars
2020-12-22 14:36:37 +01:00
25d6e24778
Add comments
2020-12-22 14:16:20 +01:00
90c8045f7d
Clean the code
2020-12-22 13:59:50 +01:00
20659ec818
Add debug output
2020-12-22 12:51:22 +01:00
c397e9249a
Restart scanning
2020-12-21 19:33:36 +01:00
1610c96fc4
Fix and report circle divergence
2020-12-21 18:05:52 +01:00
744763f0a9
Fix diagonal movement
2020-12-21 17:34:54 +01:00
de23a845b4
Remove unused
2020-12-21 15:53:51 +01:00
3c9168f8f6
Optimize diagonal
2020-12-21 15:52:25 +01:00
9a59369c77
Diagonal acceleration
2020-12-21 15:32:09 +01:00
27ff6b0057
Fix build
2020-12-21 13:11:48 +01:00
9b55ff9de1
Acceleration up and down
2020-12-21 13:05:26 +01:00
f39a0999e1
Prepare full acceleration control
2020-12-18 21:33:43 +01:00
ccf26e4e7a
Basic acceleration
2020-12-18 20:04:00 +01:00
9141aee916
Merge pull request #2923 from espr14/PFW-1162-4
...
Calibration: New XY calibration algorithm PFW-1162
2020-12-17 18:23:35 +01:00
a8f4207df9
New XYZ calibration algorithm
2020-12-17 18:19:36 +01:00
d167b3bd78
Merge pull request #2870 from leptun/MK3_random_patches
...
cmdqueue: Patches to Serial communication, pausing and file completion check
2020-11-30 09:01:38 +01:00
2ac106d9fe
Merge branch 'MK3' into MK3_random_patches
2020-11-30 09:14:58 +02:00
61c48df0bd
Merge remote-tracking branch 'upstream/MK3' into flashair_display_ip
2020-11-23 15:53:03 +09:00
93c3ea75ee
Merge pull request #2893 from leptun/MK3_fix_XYZ_cal_warning
...
Fix warning and a bit of indentation @XYZ calibration
2020-11-16 10:10:52 +01:00
Voinea Dragos
D.R.racer
DRracer
3d-gussner
espr14
Mesa Komarevich
odaki