11f1a44d40
style
2018-11-21 17:21:27 +10:00
e297131789
Tested new features
...
Confirmed most new features working. Still battling with octoprint no pausing fully when in error state. Disabled for now. Working on another way to advise user print has halted. action:command to a telegram terminal command maybe.
2018-11-19 22:17:17 +10:00
20d33b2452
TuningFor FSensor Recovery
...
Rarely the FSensor becomes unresponsive, at this time it should now re-init sensor and continue. MMU Paused for User messages modified to enable forced filament sensed if in a fail state, not sensing current filament.
2018-11-18 20:46:18 +10:00
748df343c9
Changed FS ok to exactly after load
...
Previously FS would say ok to MK3, MK3 would wait 1.5s then do C0 assuming the completion of steps to bondtech after FSensor triggered. Wastes time and if value was increase for a custom setup it wouldn't be enough time.
No the ok from to MK3 is sent once the steps to bontech are complete, no delay on MK3 saving a few 100ms on stock and accommodating for custom lengths.
2018-11-17 09:15:19 +10:00
ad53565dcc
Adjusting C0 timing, testing working.
2018-11-15 14:11:13 +10:00
ec8844d744
Upstream Merging
2018-11-14 16:14:15 +10:00
2c6c976fe3
Merging Prusa 3.5.0-RC1 Upstream
2018-11-14 13:06:34 +10:00
6d12234031
Timing Testing and cleaning
2018-11-14 05:36:12 +10:00
51b4858a87
Merge pull request #1334 from XPila/V3_5
...
PFW658 - disable extruder motor while changing filament with mmu2 (pr…
2018-11-13 16:10:24 +01:00
bfc343c7c5
PFW658 - disable extruder motor while changing filament with mmu2 (prevents extruder motor overheating)
2018-11-13 16:04:46 +01:00
5e8e96b5d7
MMU module adjustment
...
MMU module conditional compilation adjustment for MMU v1
2018-11-12 20:09:54 +01:00
6b5747750a
Heater Safety When Failed to load/unload
2018-11-11 20:17:57 +10:00
37b70d50e2
c0 timing update
2018-11-10 22:20:28 +10:00
3a89cce04f
Further #8 fix, wasn't checking sensor when M600 active, tested working now.
2018-11-10 16:25:15 +10:00
91ca177a88
format.sh
2018-11-10 01:40:15 +10:00
22cf2c6b6b
M600 load messages synchronization fixed
2018-11-09 15:31:44 +01:00
c2c2fd3d2f
Fixes issue #8
...
Fixes issue #8 on https://github.com/TheZeroBeast/MM-control-01/issues/8
Cleared filamentLoaded bool when MMU Ejecting filament.
2018-11-09 21:28:34 +10:00
ebbed236a0
Fixed 2130 init for homing mid print.
2018-11-09 01:04:02 +10:00
4b4e400875
Testing proceeding, small idler sync issue when recovering from failed unload
2018-11-08 22:25:30 +10:00
8d79f21ba3
Further work on comms.
2018-11-08 03:54:54 +10:00
4a4a10575c
Added command MMU => MK3 requesting to look for load
2018-11-08 01:15:40 +10:00
726326e755
.
2018-11-07 17:41:20 +10:00
b9cfa89fc4
.
2018-11-07 03:31:33 +10:00
3d7841f3aa
Comms ACK working for new FS command
...
Added FS command to MMU when filament is sensed at MK3 FSensor
2018-11-07 03:29:39 +10:00
2c084d4fd9
case 20: mod
2018-11-07 01:18:32 +10:00
4e21d7482c
added mmu_loop case 20:
2018-11-07 01:01:16 +10:00
e81af1a06e
comms work
2018-11-06 17:59:44 +10:00
e95c2ad592
Display auto deplete as not available if filament sensor is disabled.
2018-11-05 17:43:07 +01:00
35f85c00d0
Starting implementation of serial ACK verification for each MMU-CMD
2018-11-05 21:30:05 +10:00
0a2ad97bc6
Merge pull request #1290 from PavelSindler/mmu_improvements
...
mmu improvements: load to nozzle, gcodes for single material mode, M600 fix
2018-11-05 10:38:05 +01:00
dbac1c7159
formatting
2018-11-05 11:32:41 +10:00
54a69d7444
added MK3 Versioning and link to MMU2-FW
2018-11-05 11:19:45 +10:00
537db0ee12
stability improovements, speed reduced for load.
2018-11-03 23:50:40 +10:00
1f1b72f3bb
fixed first load failing due to def being extruder 0 instead of -10. e.g. something other than one of the extruder values
2018-11-03 13:25:19 +10:00
bdfe509bc3
push some unload fixes
2018-11-03 08:51:57 +10:00
d18013e5a2
manage response now contains showing nozzle temperature and possibility to resume saved nozzle temperature
2018-11-02 19:31:10 +01:00
b5d6642e10
Rolled back to working without unload sense and hedged recover from filament at boot for now
2018-11-02 22:39:01 +10:00
6c56deae4f
move files, I'm so tired LOL
2018-11-02 19:25:43 +10:00
1342c312a0
use feedrate 200mm/min for final feed (faster and better filament sensor function), show default welcome message when load is finished
2018-11-01 16:51:18 +01:00
96ce324b7c
load to nozzle improved, unified feedrate and E-distance for final feed used in load filament function, M600 etc.
2018-11-01 16:29:09 +01:00
e80af46503
load to nozzle and Tx and Tc codes: intial version
2018-10-31 21:48:05 +01:00
c5236c84df
Updated mmu_loop() Case 3:
2018-10-29 12:30:50 +10:00
8fd41841c8
Updated Case 3:
2018-10-29 09:19:11 +10:00
94a52e8d58
Initiale upload
2018-10-29 09:03:53 +10:00
cdb06c65f3
Merge pull request #1275 from PavelSindler/3_4_2_branch_merging
...
3_4_2 branch merging into MK3
2018-10-25 21:45:51 +02:00
d1de9fff60
mmu_loop: missing return added
2018-10-22 20:38:32 +02:00
bc247ca02c
MK2.5 sw reset at setup function
2018-10-19 17:54:48 +02:00
b8f92fdfa9
MK2.5 printers set mmu to stealth mode (using Mx code), required mmu2 buildnr can be different for MK2.5 and MK3 printers
2018-10-18 02:44:16 +02:00
ab2d350ed1
Don't enable lcd update in lcd_show_fullscreen_message_and_wait_P(). Don't show menu in wizard when ejecting filament.
2018-09-17 21:23:13 +02:00
a687b8e64a
Don't enable lcd update inside mmu_eject_filament().
2018-09-17 17:12:36 +02:00
Rob McKenzie
PavelSindler
Robert Pelnar
MRprusa3d
PavelSindler
Marek Bel
MacBookPro
MacBookPro
mkbel