b41ece175b
Handle CALIBRATION_STATUS_LIVE_ADJUST
2022-12-30 14:14:01 +01:00
5ec627c12c
wizard: Rewrite the fw upgrade check logic
...
- Handle the conversion from the V1 calibration status to the V2 bitmap
for all past FW versions.
- Allow to run the wizard in "Restore" mode (for example during upgrade
or service prep) to complete any missing steps.
- Fix service prep to use the above feature by clearing the appropriate
calibration bits.
- Remove exceptions for FW 3.2.0.4 which can now be handled cleanly.
2022-12-30 14:14:01 +01:00
22c0e15047
wizard: Rewrite the wizard handling loop
...
Simplify status tracking:
- S::Restore to continue to the next logical wizard item
- S::Finish for a successful failure
- S::Failed to exit while showing a failure
2022-12-30 14:14:01 +01:00
a712546269
wizard: Remove unused wizard stages
...
Remove PreheatPla/IsPla, as we currently always explicitly ask for the
material type.
2022-12-30 14:14:01 +01:00
da6e56a17e
Simplify altfan override initialization
2022-12-30 14:14:01 +01:00
9a018230ce
Replace calibration state with a new calibration bitmap
...
- Move calibration status/declarations to util.h
- Allows to query the status of each step independently without assuming
any order
- Allows to extend the calibration with new steps transparently
2022-12-30 14:14:01 +01:00
2552fee4c7
eeprom: Fix EEPROM_HEAT_BED_ON_LOAD_FILAMENT debug offset in docs
2022-12-30 14:14:01 +01:00
0e2c2d9eea
Simplify FW eeprom version checks
...
- Generalize force_selftest_if_fw_version() so we can check when upgrading
between arbitrary FW versions.
- Do not call update_current_firmware_version_to_eeprom() prematurely
when forcing self-test (if a reset happens before self-test completes,
the check would be incorrectly skipped on the next run).
2022-12-30 14:14:01 +01:00
74609009ca
Fix M117 string offset
2022-12-30 14:06:48 +01:00
9105573ac9
Handle/strip leading whitespace in gcode stream
2022-12-30 14:06:48 +01:00
a4d427adf2
De-specialize M0/M1/M117
...
Since we no longer scan for the first command these exceptions can be
removed.
2022-12-30 14:06:48 +01:00
bb1e438f00
Do not scan for GMTD commands
...
Expect these to be always at the start of the line.
2022-12-30 14:06:48 +01:00
f46be49f7d
Tighten parsing of M0/M1/M117/PRUSA
...
Expect these to be always at the start of the command (which is now
stripped of the extra line number), reducing the number of corner cases
due to these not following the g-code spec.
2022-12-30 14:06:48 +01:00
7c896a87a4
Remove '*' (checksum) handling in process_commands
...
The checksum is already removed from the command queue so there's no
need to reprocess it in the main loop.
2022-12-30 14:06:48 +01:00
6651f5ce8b
Strip the line number from the command queue
...
This increases the number of commands that can be queued and at the same
time it avoids a considerable amount of rescanning in a critical path.
2022-12-30 14:06:48 +01:00
797513d3c5
Remove T parameter from M221
...
Fixes #3852
2022-12-30 13:07:56 +01:00
4219beed71
Remove initial cursor setting
...
The cursor position is controlled by
the for-loop
Change in memory:
Flash: -8 bytes
SRAM: 0 bytes
2022-12-30 12:57:07 +01:00
1186b36bfa
Remove whitespace at start of new row
2022-12-30 12:57:07 +01:00
7529eaec44
Remove duplicate code
...
msg_next is NULL, then the end of the message has been reached.
Change in memory:
Flash: -24 bytes
SRAM: 0 bytes
2022-12-30 12:57:07 +01:00
5037d1edbc
delay_keep_alive calls manage_heater and manage_inactivity
...
No need to call them again, the for-loop is very quick
Change in memory:
Flash: -10 bytes
SRAM: 0 bytes
2022-12-30 12:57:07 +01:00
1a9b7d79e6
Don't handle whitespace in a special way
...
Instead of reading and checking if a character is a whitespace
just print it out onto the LCD. This makes the code a bit less
complex. Whether there is a whitespace character, we always end
up reading from program space, so I doubt this has much performance
impact.
Change in memory:
Flash: -38 bytes
SRAM: 0 bytes
2022-12-30 12:57:07 +01:00
7925df6aa0
Default check action is continuing
2022-12-30 12:49:57 +01:00
96707aadcb
Fix timeout making UI freeze
2022-12-30 12:49:57 +01:00
92cf8da45e
Remove unused defines
2022-12-30 12:49:57 +01:00
df65212449
Add yes-no choice to M862 warning
...
Fixes #3421
Change in memory:
Flash: -98 bytes
SRAM: 0 bytes
2022-12-30 12:49:57 +01:00
54704cb928
Merge pull request #3842 from wavexx/readme_updates
...
README: Document the new build system
2022-12-29 13:34:45 +01:00
732be51b24
Merge pull request #3858 from wavexx/consistent_targets
...
cmake: Consistent target names
2022-12-29 13:33:12 +01:00
4258ecef36
README: Fix formatting
2022-12-29 12:56:16 +01:00
4ff9324377
README: Update target names
2022-12-29 12:55:57 +01:00
abf7fbf99b
cmake: Consistent target names
...
- Use ALL_MULTILANG and VARIANT_MULTILANG instead of VARIANT_Multilang
- Use ALL_ENGLISH and VARIANT_ENGLISH instead of VARIANT_En-only
- Rename the intermediate VARIANT_Multilang_* targets to VARIANT_lang_*
to avoid confusion
2022-12-29 12:47:21 +01:00
cc3d36c78f
Replace labs with fabs
...
Both degHotend and degTargetHotend return a float
In this case it is better to use fabs()
Change in memory:
Flash: -14 bytes
SRAM: 0 bytes
2022-12-29 08:54:50 +01:00
4207910db9
Merge pull request #3851 from gudnimg/cleanup-gudni
...
Minor header cleanup in Marlin_main.cpp
2022-12-27 18:21:51 +00:00
03511a5a7c
Remove redundant ultralcd includes in Marlin_main
...
This also removes two definitions
- ULTRALCD
- LCD_USE_I2C_BUZZER
Neither of them are defined anywhere
2022-12-27 12:03:56 +00:00
9757502abc
Remove pins_arduino.h include
...
This header is already included with Arduino.h which
is included in Marlin.h header.
2022-12-27 12:03:14 +00:00
72857c902c
drop conv2str dependency in Marlin_main
2022-12-27 11:59:22 +00:00
fea608c8c4
A few more meassuring typos
2022-12-22 12:54:42 +01:00
b3790f4094
Typo: meassure -> measure
2022-12-22 12:54:42 +01:00
52941b1111
Rename xyzcal_meassure_center back to xyzcal_meassure_enter
...
Keep the enter/leave pairs
2022-12-22 12:54:42 +01:00
515a625180
Typo: hysterezis -> hysteresis
2022-12-22 12:54:42 +01:00
8414c272bf
Merge pull request #3787 from gudnimg/PFW-1439
...
PFW-1448 Fix underextrusion + compensate load to nozzle extruder sequence for Extra Loading Distance
2022-12-22 11:07:28 +01:00
775cabb31e
Merge pull request #3847 from 3d-gussner/MK3_Clear_TM_error
...
MK3: Add translations for `Clear TM error` message
2022-12-20 16:40:28 +01:00
9098206afb
Add translations for `Clear TM error` message
2022-12-20 15:25:15 +01:00
9ca7760c2e
Merge pull request #3830 from 3d-gussner/MK3_XYZ_cal_fix
...
MK3: XYZ cal change message and add LCD ouput
2022-12-20 14:16:49 +01:00
0bcb4ab59d
Merge pull request #3822 from wavexx/tm_partial_lock
...
MK3: TM: Prevent lockout on invalid model values
2022-12-20 14:13:56 +01:00
7fef570d1b
Change xyz cal message `up to 24 min.` instead `approx. 12 min.`
2022-12-20 10:30:53 +01:00
355b670cd4
Remove SWSPI which is not used/implemented
2022-12-20 10:10:45 +01:00
2b38080c7e
Merge pull request #3833 from leptun/MK3_fix_MK2.5_softReset
2022-12-20 10:02:14 +01:00
ea6450f072
Add LCD output during xyz calibration
2022-12-20 08:36:19 +01:00
65f5b9e53d
Merge pull request #3818 from wavexx/tm_default_state
...
TM: Provide full defaults for model data and enable it by default
2022-12-20 07:08:25 +01:00
62ea78d46e
Handle configurable distance past gears
2022-12-19 23:49:12 +01:00
Yuri D'Elia
Guðni Már Gilbert
Alex Voinea
Yuri D'Elia
3d-gussner