c8157919b1
PFW-1440 Fix issue where cooldown timer is not set after a faile retry
2022-11-21 12:54:53 +01:00
37ac33bc32
Fix compiler warning
2022-11-21 12:54:53 +01:00
fe6e3ca2b1
Unload first before retrying
...
Should free the filament if accidentally held by the fsensor.
2022-11-20 19:23:07 +01:00
5639620041
Avoid watchdog while doing VerifyFilamentEnteredPTFE
2022-11-20 17:27:36 +01:00
84d9eee61d
Resume hotend temperature if parked + MMU restarted
...
PFW-1355
2022-11-20 17:27:36 +01:00
01c1f4a8dd
Load test: Monitor unload as well
2022-11-20 17:27:36 +01:00
5c8ea4c90a
fixup
2022-11-20 17:27:36 +01:00
327f0edb17
VerifyFilamentEnteredPTFE must take into account the Extra Loading Distance
2022-11-20 17:27:36 +01:00
c9d9ba0b1a
Add a bracket around subtraction, just in case
2022-11-20 17:27:36 +01:00
ef51b5778d
Fix VerifyFilamentEnteredPTFE
...
Test should push filament first and then retract.
2022-11-20 17:27:36 +01:00
aaebaf163f
Cleanup MSG_MMU_POWER_FAILS
2022-11-20 17:27:36 +01:00
a17153f877
Make TMC mask more readable
2022-11-20 17:27:36 +01:00
f1ed2fc5c7
Fix issue where tool_change_extruder is not reset after retry
2022-11-20 17:27:36 +01:00
541cd3ae94
Remove debug messages of Interrupted state
2022-11-20 17:27:36 +01:00
46f4f2658d
PFW-1432 Reduce LOC
...
If verification test fails, increment load fail statistic
2022-11-20 17:27:36 +01:00
03235c8aab
PFW-1432 restore toolchange load testing
2022-11-20 17:27:36 +01:00
adb24cd410
Increment errors in ReportError
2022-11-20 17:27:36 +01:00
4eaabbf092
Revive MMU stats + LCD screens
2022-11-20 17:27:36 +01:00
fe11b7a247
Tune Interrupted state based on unit tests
...
Now finally the printer can restart ToolChange if MMU restarted.
2022-11-20 17:27:36 +01:00
ffbd95b482
Unify naming convention (index->slot)
...
in all top level MMU-related functions
2022-11-20 17:27:36 +01:00
e414413b2e
Refactor ToolChange+LoadToNozzle
...
Add basic infrastructure for handling of repeated commands until they finish correctly.
2022-11-20 17:27:36 +01:00
10a9e0f0a0
Recover from MMU restart while performing a command
...
PFW-1427
2022-11-20 17:27:36 +01:00
603faddd25
Fix bug where toolchange counter is not rendered
2022-11-20 15:42:29 +00:00
5dc539cda5
fixup
2022-11-20 13:12:01 +01:00
62810c5a7c
optimisation: lcdui_print_extruder
...
Simplify the rendering to cover more scenarios:
"[nr.]>?"
"?>?"
Both of these indicate there is a bug in the firmware.
Currently these are not handled and result in the status screen being corrupted.
This is because we are trying to write a 3 digit number
where there is not space on the LCD for it.
Change in memory:
Flash: -52 bytes
SRAM: 0 bytes
2022-11-20 13:12:01 +01:00
281a217549
Update Temp Model messages
...
Deepl translate cs,de,es,fr,it,nl,pl
2022-11-20 10:49:46 +01:00
f2f54da5b0
Unhack selftest hack during wizard
2022-11-20 10:48:49 +01:00
d592586d94
cleanup: remove dead code lcd_adjust_z()
...
It's only used when MESH_BED_LEVELING is not defined. According to
the configuration files, all printers supported use MESH_BED_LEVELING.
So I think we are safe in removing this dead code.
2022-11-19 22:19:48 +00:00
411d1da3c8
Merge pull request #3763 from gudnimg/optimisation-float-conversions
...
optimisation: TCodes accepts `uint8_t` not `float`
2022-11-18 19:52:22 +00:00
58775b8b55
Change unsigned long to uint32_t
2022-11-18 14:50:07 +01:00
bda134a01e
Save a bit of RAM from CS
...
Do not store EEPROM_VERSION in ram
flash: -6
RAM: -2
2022-11-18 14:50:07 +01:00
ef83fefce1
More optimization
2022-11-18 14:50:07 +01:00
8f4ac82273
eeprom_init_default also returns the read/default value
2022-11-18 14:50:07 +01:00
b317786110
More configuration store savings
...
flash: -94B
RAM: 0B
2022-11-18 14:50:07 +01:00
b551bdae76
Some more CS improvements
...
flash: -2B
RAM: 0B
2022-11-18 14:50:07 +01:00
5305dbd299
Sheet name initialization improvements
...
The code looks better, but it takes a bit more flash. I prefer it like this
flash: +20B
ram: 0B
2022-11-18 14:50:07 +01:00
bba5385a61
Move string to progmem
...
flash: -84B
RAM: -4B
2022-11-18 14:50:07 +01:00
6edc71d0ae
Remove deprecated configs
2022-11-18 14:50:07 +01:00
dcc48c0052
Remove eeprom _int8t functions
...
flash: -48B
RAM: -4B
2022-11-18 14:50:07 +01:00
af60cd7d79
Optimize EEPROM_writeData and EEPROM_readData
...
flash: -162B
RAM: -4B
2022-11-18 14:50:07 +01:00
771f833a44
Implement eeprom dword functions
2022-11-18 14:50:07 +01:00
ca943cceec
Split the increment function into increment and add
...
No size difference since the compiler did a good job optimizing the inc argument (always 1 before).
2022-11-18 14:50:07 +01:00
455c29e78b
Optimize EEPROM usage/functions
2022-11-18 14:50:07 +01:00
414d3f1c12
Display Welcome message after MMU progress report ends
...
Should make the status line look cleaner when the printer is not printing.
2022-11-18 14:09:48 +01:00
c86c961d4e
M600: Fix bug where fan is not turned off
...
The firmware saves the current fanspeed before parking,
and the fanspeed is restored after unparking. The problem is the fan
was never actually paused.
Fixes #3670
2022-11-18 11:18:29 +01:00
b147fcee77
XYZ calibration fixes
2022-11-18 00:18:42 +01:00
384a6d1989
Fix wizard serial messages
2022-11-17 23:03:03 +01:00
30ec4e8b53
Inital Temp Model cal wizard
2022-11-17 15:19:35 +01:00
2096accc5f
Remove unused gcode level check code
...
This code was introduced with v3.8.0 but was always disabled.
I propose the code be removed since it has not been enabled
for 3 years since its introduction.
2022-11-17 08:05:27 +01:00
6059398004
Introduce MMU Error: INSPECT_FINDA (FINDA_FLICKERS)
2022-11-17 07:58:11 +01:00
29882b625b
Remove LcdCommands::FarmModeConfirm
2022-11-17 05:46:33 +01:00
e11ef11a64
PFW-1425 Rename "Load to Extruder" to "Loading Test"
2022-11-16 06:00:15 +01:00
7b43f322de
PFW-1425 Move Reset MMU setting
2022-11-15 17:32:27 +01:00
b4920d7fa8
PFW-1425 use mmu2.Enabled instead of EEPROM read
2022-11-15 17:32:27 +01:00
3f4ac254ab
PFW-1425 Move MMU settings under a common if statement
...
We only need to check if the MMU is enabled once,
no need to do it in every submenu.
This way we save little bit of flash memory.
Change in memory:
Flash: -24 bytes
SRAM: 0 bytes
2022-11-15 17:32:27 +01:00
8f3f071fd4
PFW-1425 Move Load to Extruder menu to Settings menu
...
No change in memory footprint
2022-11-15 17:32:27 +01:00
5239f1c176
cleanup: remove old extern for mmu_print_saved
2022-11-15 09:44:02 +01:00
4f58812478
optimise lcd_sdcard_menu with lcd_print_pad
...
Change in memory:
Flash: -46 bytes
SRAM: 0 bytes
2022-11-13 09:29:37 +01:00
184e19dd60
further optimise lcdui_print_status_line
...
We can use lcd_print_pad to determine
whether the end of the file name was reached
lcd_print_pad now returns the last character pointed to.
If the end of the string was reached, it will be the null delimeter which
evaluates to "false" in an if statment (same as NULL).
Else "true" means the end of the string was not reached.
Change in memory:
Flash: -42 bytes
SRAM: 0 bytes
2022-11-13 09:29:37 +01:00
0af7ef0201
optimisation: reduce code size in showing file name being printed
...
Change in memory:
Flash: -52 bytes
SRAM: 0 bytes
2022-11-13 09:29:37 +01:00
a2bbc4f585
Merge pull request #3745 from leptun/MK2.5_XYZ_Cal_fixes
...
MK2.5 XYZ calibration fixes
2022-11-12 21:48:16 +01:00
006fe110cc
Don't raise MMU error screen until retry is done
...
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2022-11-12 18:47:10 +01:00
68bd7f9b19
Fix excessive flash usage.
2022-11-12 18:47:10 +01:00
ecef69012a
Fix PFW-1364 & possible comms timeout during reheat
2022-11-12 18:47:10 +01:00
509813f60b
optimsation: TCodes accepts uint8_t not float
...
Change in memory:
Flash: -20 bytes
SRAM: 0 bytes
2022-11-12 16:50:45 +00:00
661b3a83ff
MK2.5: fix swapped yes/no messaged for Z manual alignment
2022-11-10 22:20:46 +01:00
1cdc2e712b
MK2.5: unblock planner after plan_abort_hard()
2022-11-10 22:20:01 +01:00
fd832f9ccf
Merge pull request #3737 from gudnimg/fix-longpress-inactivity-timeout
...
Fix long-press LCD inactivity timeout
2022-11-08 14:10:57 +01:00
76a164e651
fixup
2022-11-08 13:49:40 +01:00
08460bd403
PFW-1397 Drop ON_MENU_ENTER
...
Using _menu_data_t turns out to save *just* a little bit more flash. So for now just use it.
2022-11-08 13:49:40 +01:00
390f69a82f
PFW-1397 Fix: ON_MENU_ENTER was always run
2022-11-08 13:49:40 +01:00
59a452ac27
PFW-1397 minor comment tweaks
2022-11-08 13:49:40 +01:00
f160f5594d
PFW-1397 cleanup statistics menu
...
Change in memory:
Flash: -18 bytes
SRAM: -1 byte
2022-11-08 13:49:40 +01:00
82bd9db1d6
PFW-1397 Implement ON_MENU_ENTER to simplify code
...
ON_MENU_ENTER runs code within the brackets only once
after a new menu is entered.
For the tool change menu, this allows us to display the data and
read from EEPROM only once.
2022-11-08 13:49:40 +01:00
a896dfd4e0
PFW-1397 To reserve EEPROM write cycles, only update toolchange counter when a print finishes or is stopped
2022-11-08 13:49:40 +01:00
3120bf0aa2
PFW-1397 Implement new function increment_tool_change_counter()
...
Reduces flash consumption by 44 bytes
2022-11-08 13:49:40 +01:00
fcfb868167
PFW-1397 Add a temporary menu item to show the statistic
...
The location of the menu has not been decided. Currently I placed it where convenient.
2022-11-08 13:49:40 +01:00
5a60a85467
PFW-1397 Increment toolchange statistic
2022-11-08 13:49:40 +01:00
0af7d28074
PFW-1397 Allocate EEPROM memory for toolchange counter
2022-11-08 13:49:40 +01:00
7fe22e8f79
Fix long-press LCD inactivity timeout
...
Fixes #3715
When a long-press is triggered, the LCD inactivity timer
needs to be restarted. This is done with lcd_timeoutToStatus.start()
This also fixes situations where a long-press is triggered, and the timer
times out immediately (because it was not reset properly)
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2022-11-06 13:43:14 +00:00
853adbf411
Bump up build number
...
+1 for commit
+1 for merge
2022-11-04 11:16:07 +01:00
7c009cadb8
Bump up Revision to ALPHA1 6051
...
Temporary fix for MSG_BTN_MORE
pre-release pot and po update
2022-11-04 10:21:39 +01:00
7b20f8c6f3
Merge pull request #3717 from 3d-gussner/MK3_Temp_Model_menu
...
Add Menu `Calibration -> Temp. model cal`
2022-11-03 12:12:55 +01:00
1e0909d50c
Disable `Error:` messages for MMU2 errors
2022-11-03 12:09:03 +01:00
8543942acb
Fix Z-leveling
2022-11-03 06:22:57 +01:00
fd6da0e766
Fix typo
...
Add lcd_setatatus_serial to output lcd status message and serial at the same time
2022-11-02 10:09:32 +01:00
7bc7f21fa5
mmu: move RetryIfPossible outside the error screen
...
This fixes issue where 'retryAttempts=3' may be spammed in the logs
Change in memory:
Flash: 0 bytes
SRAM: 0 bytes
2022-11-01 06:22:39 +01:00
2ac2cd2255
Fix MK25/S builds
2022-10-26 14:27:22 +02:00
072b3f8300
Temp Model cal. menu
2022-10-26 13:34:27 +02:00
f4a2c1c794
Update translations
...
Fix button msg
Update Dutch `F. jam detect`
2022-10-25 10:29:35 +02:00
45c72d48ed
optimisation: use failstats_reset_print in factory_reset_stats
...
Change in memory:
Flash: -56 bytes
SRAM: 0 bytes
2022-10-23 09:58:56 +00:00
edc5d013dd
Merge pull request #3698 from leptun/farm_presort_cache
...
Farm mode: cache filenames in the presort function
2022-10-21 15:43:49 +02:00
b792d47350
Merge pull request #3694 from 3d-gussner/MK3_Hotend_fan
...
PFW-1415: Rename `Extruder fan` to `Hotend fan`
2022-10-19 08:47:15 +02:00
b485992c9e
If in farm mode, force the sorting direction to be reversed
...
So in an ideal scenario, the newest file is first. This of course breaks as soon as a file is deleted/renamed/moved, but it should at least be fixed now compared to before where the direction could be influenced by a disabled setting
2022-10-18 17:29:31 +02:00
798f215f88
Refactor SD menu settings
2022-10-18 17:24:35 +02:00
eaaf1d6872
Rename Sheets
...
- `Satin 1` to `Satin `
- `Satin 2` to `NylonPA`
2022-10-18 10:20:01 +02:00
e18bfce597
Farm mode: cache filenames in the presort function
2022-10-17 20:17:28 +02:00
e83728f72c
Change fan RPM display to 5 digits
...
All credits to @ WarrenSchultz for initial PR https://github.com/prusa3d/Prusa-Firmware/pull/3656
2022-10-17 15:41:05 +02:00
f2fe9a51ee
rename `Extruder fan` to `Hotend fan`
2022-10-17 13:49:18 +02:00
2682b64a09
Optimisation: Reduce code size in rendering SD file names and folders
...
Change in memory:
Flash: -88 bytes
SRAM: 0 bytes
2022-10-12 20:19:21 +00:00
Guðni Már Gilbert
D.R.racer
3d-gussner
Alex Voinea
VintagePC
DRracer