josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7,664 Commits 31 Branches 140 Tags 71 MiB
Commit Graph

1930 Commits

Author SHA1 Message Date
Guðni Már Gilbert e323490659 optimisation: Remove unused Z offset 
Frees up some SRAM

Change in memory:
Flash: 0 bytes
SRAM: -4 bytes
 2023-09-19 23:37:38 +00:00
3d-gussner 8bd71b7bf0
Merge pull request #4391 from sarusani/mbl_default_to_eeprom 
MBL: Default to EEPROM values
 2023-09-18 15:52:38 +02:00
D.R.racer be5523187b Sync MK3<->MK4 MMU2 mmu2_mk4.h 2023-09-18 10:51:32 +02:00
sarusani e4a10e5fab Move code_seen back into if statement 
Same memory usage, but prettier to look at. :)
 2023-09-15 14:11:27 +02:00
sarusani 56a79f88ef Optimise memory usage 2023-09-15 14:11:27 +02:00
sarusani 2951bc8af0 Default to eeprom values 
Use eeprom values if provided parameters are out of bounds.
 2023-09-15 14:11:27 +02:00
3d-gussner 9e794a47a4
Merge pull request #4386 from 3d-gussner/MK3_mbl_print_area_translations 
🚧  Add new MBL message for #4183 and translation
 2023-09-15 09:00:38 +02:00
sarusani 2863c9bc01 Cleanup: whitespace in nProbeRetryCount var 2023-09-14 09:43:26 +02:00
3d-gussner 5f605012eb
Merge pull request #4388 from prusa3d/vintagepc/tmc-mode-query 
Add Q parameter to M91[4/5]
 2023-09-14 09:13:55 +02:00
VintagePC 70d83fe4ee Add Q parameter to query current mode. 2023-09-13 16:52:11 -04:00
sarusani a9c8bb7dbf Code cleanup: rename params 2023-09-13 18:31:45 +02:00
sarusani d3bb6e5ca5 Rename MBL repeat param 2023-09-13 17:37:39 +02:00
3d-gussner ca27841d67 Add new MBL message for #4183 and translate these messages 2023-09-13 11:14:16 +02:00
3d-gussner 2e70697fa7
Merge pull request #4183 from leptun/mbl_print_area 
MBL print area
 2023-09-13 10:28:08 +02:00
3d-gussner 74f724b228
Merge pull request #4174 from gudnimg/check_all_heaters 
optimisation: use `CHECK_ALL_HEATERS` in more places
 2023-09-12 16:31:45 +02:00
3d-gussner c84985ec3e
Merge pull request #4328 from dawidpieper/m850_addselection 
M850 add possibility to set sheet as active
 2023-09-11 13:02:04 +02:00
Guðni Már Gilbert e6f05e7856 PFW-1522 Fix firmware getting stuck on ejecting 
If slot is unknown, the printer will always get a rejected command
error from the MMU.

Change in memory:
Flash: +4 bytes
SRAM: 0 bytes
 2023-08-18 14:27:39 +02:00
Guðni Már Gilbert fc18f4c5d7 PFW-1522 Implement filament change screen 
Change in memory:
Flash: +116 bytes
SRAM: +1 byte
 2023-08-18 14:27:39 +02:00
Alex Voinea ede4cc5d30
Update error messages 2023-08-17 08:02:47 +02:00
Alex Voinea 45823e7336
Make the G80 Z threshold tighter 2023-08-17 08:02:47 +02:00
Alex Voinea f5f09f147c
Add a limit to how many times G80 can fail 
Flash: +80
SRAM: +1
 2023-08-17 07:53:39 +02:00
Alex Voinea 7740a81edb
Do not store a global mbl_z_probe_nr 
flash: -6
sram: 0? (somehow)
 2023-08-17 07:53:39 +02:00
Alex Voinea a984b2e609
G80 `O` parameter 
a
 2023-08-17 07:53:39 +02:00
Alex Voinea a15f536ff4
Combine BED_X/Y() and mbl::get_x/y() 
flash: -112
 2023-08-17 07:52:55 +02:00
Guðni Már Gilbert 6b12be42d9
optimisation: Make BED_X and BED_Y into functions 
Previously these preprocessor macros were always being inlined.
By making these into a function we can control the inlining
more directly.

The number of points on the mesh is also now constant. This means
'n' can now be float at compile time. This removes one uint8_t to float
conversion.

Change in memory:
Flash: -208 bytes
SRAM: 0 bytes
 2023-08-17 07:52:55 +02:00
Alex Voinea 3ccf2d60c0
Make bed correction matrix const 2023-08-17 07:52:55 +02:00
Alex Voinea be3465cf18
optimize lambda expression capture 
flash: -10
 2023-08-17 07:52:55 +02:00
Alex Voinea 2d0b96fe6a
Bed correction code optimization 
flash: -44
 2023-08-17 07:52:55 +02:00
Alex Voinea 5b8c65e342
Minor magnet elimination optimization 
flash: -4B
 2023-08-17 07:52:55 +02:00
Alex Voinea 67945579de
G80 minor optimization 2023-08-17 07:52:55 +02:00
Alex Voinea a5c20a1c6e
Do not plan a Z move if no move is actually performed 2023-08-17 07:52:55 +02:00
Alex Voinea de98551691
Extract hardcoded value 2023-08-17 07:52:55 +02:00
Alex Voinea 40db9c9258
Fix eeprom mesh offset 2023-08-17 07:52:55 +02:00
Alex Voinea a7d3dd720b
Fix eeprom mesh interpolation 2023-08-17 07:52:55 +02:00
Alex Voinea 36d8de0727
G80 general fixes 
Use interpolated eeprom mesh for skewed Z detection
Use the interpolated eeprom mesh for raising Z for the next point
Fix LCD countdown during MBL
 2023-08-17 07:52:55 +02:00
Alex Voinea b234560b22
MBL print function optimization 2023-08-17 07:52:55 +02:00
Alex Voinea f94bc72235
Optimize G80 bed correction argument parsing 2023-08-17 07:52:55 +02:00
Alex Voinea 6c97907507
A bit more cleanup 2023-08-17 07:52:55 +02:00
Alex Voinea 6af5f5e2a2
Some code cleanup around homing_feedrate 2023-08-17 07:52:55 +02:00
Alex Voinea 83879fd10c
Cleanup magnet compensation code 2023-08-17 07:52:55 +02:00
Alex Voinea 46710c4b4e
G80 code cleanup 2023-08-17 07:52:55 +02:00
Alex Voinea 07b9447ee1
Fix correction nMeasPoints 2023-08-17 07:51:15 +02:00
Alex Voinea a4ef72b1fc
Use mesh from eeprom during print area MBL 2023-08-17 07:51:15 +02:00
Alex Voinea 7b9f2086f4
MBL print area initial implementation 2023-08-17 07:51:15 +02:00
Alex Voinea 11e1806e0c
Gcode documentation 2023-08-17 07:51:15 +02:00
Guðni Már Gilbert c4f48a6606 MMU: Disable FINDA runout during Homing and MBL 
If for some reason a user added a extrusion move in the firmware. Prevent FINDA runout
from triggering.

Change in memory:
Flash: +16 bytes
SRAM: 0 bytes
 2023-08-17 07:43:59 +02:00
Guðni Már Gilbert 61ec6b8ae7 G80: Don't unretract unless retracting first 
temp_compensation_start() is only called when
PINDA_THERMISTOR is not defined.
Additionally make sure the retraction or unretraction cannot happen
twice in case MBL fails.

For MK3S users with MMU this extrusion move could
cause a FINDA runout event.

Change in memory:
Flash: -130 bytes
SRAM: 0 bytes
 2023-08-17 07:43:59 +02:00
dawidpieper 14306e59c8 Try immediate EEPROM writes for flash size optimization 2023-08-16 20:36:24 +02:00
dawidpieper 1dada5ba81 Revert optimizations of bIsActive 2023-08-16 20:18:16 +02:00
dawidpieper 91cb01b12f Code optimization 2023-08-16 20:08:53 +02:00