7c7d6b1671
Fix issue with Tune item appearing on MMU FW UPDATE screen
2023-08-21 06:33:14 +02:00
a89e06a54e
optimisation: Timer constructor can be constexpr
...
Change in memory:
Flash: -206 bytes
SRAM: -16 bytes
2023-08-20 19:39:38 +00:00
cabc44194a
optimisation: menu_item == menu_line is always true
...
The if statement is checked in lcd_sdcard_menu()
so checking it again these functions is
redundant since it's always going to be true.
Tested on MK3S+
Change in memory:
Flash: -22 bytes
SRAM: 0 bytes
2023-08-20 08:19:01 +00:00
2a71e681db
cmake: Cache CUSTOM_COMPILE_OPTIONS
...
This allows persisting custom flags across builds, as intended.
2023-08-18 14:30:10 +02:00
94eb4d8f0a
Update NO translation
2023-08-18 14:27:39 +02:00
cfbe74b960
Update PL translation
2023-08-18 14:27:39 +02:00
d2ce4cfb88
Update HR, HU, RO, SK translations
2023-08-18 14:27:39 +02:00
fb8bf8bf58
Improve CS, SK translations
2023-08-18 14:27:39 +02:00
5209715c11
Update po files and translate new messages
2023-08-18 14:27:39 +02:00
60534738d3
PFW-1522 Don't increment failure statistic on filament change
2023-08-18 14:27:39 +02:00
e6f05e7856
PFW-1522 Fix firmware getting stuck on ejecting
...
If slot is unknown, the printer will always get a rejected command
error from the MMU.
Change in memory:
Flash: +4 bytes
SRAM: 0 bytes
2023-08-18 14:27:39 +02:00
c7360055ae
PFW-1522 Make Load the default button choice
...
No change in memory
2023-08-18 14:27:39 +02:00
814169a213
PFW-1522 Update screen description
...
Change in memory:
Flash: +32 bytes
SRAM: 0 bytes
2023-08-18 14:27:39 +02:00
fc18f4c5d7
PFW-1522 Implement filament change screen
...
Change in memory:
Flash: +116 bytes
SRAM: +1 byte
2023-08-18 14:27:39 +02:00
ede4cc5d30
Update error messages
2023-08-17 08:02:47 +02:00
45823e7336
Make the G80 Z threshold tighter
2023-08-17 08:02:47 +02:00
f5f09f147c
Add a limit to how many times G80 can fail
...
Flash: +80
SRAM: +1
2023-08-17 07:53:39 +02:00
7740a81edb
Do not store a global mbl_z_probe_nr
...
flash: -6
sram: 0? (somehow)
2023-08-17 07:53:39 +02:00
a984b2e609
G80 `O` parameter
...
a
2023-08-17 07:53:39 +02:00
a15f536ff4
Combine BED_X/Y() and mbl::get_x/y()
...
flash: -112
2023-08-17 07:52:55 +02:00
aba0450615
mbl.get_z() optimizations
...
Those constrains on t and s were useless.
flash: -294
2023-08-17 07:52:55 +02:00
dd1bde74dc
Fix Z calibration points
2023-08-17 07:52:55 +02:00
42c27cabde
Remove unused code
2023-08-17 07:52:55 +02:00
a9d0cc5e56
optimisation: Move divison into constexpr
...
Change in memory:
Flash: -12 bytes
SRAM: 0 bytes
2023-08-17 07:52:55 +02:00
6b12be42d9
optimisation: Make BED_X and BED_Y into functions
...
Previously these preprocessor macros were always being inlined.
By making these into a function we can control the inlining
more directly.
The number of points on the mesh is also now constant. This means
'n' can now be float at compile time. This removes one uint8_t to float
conversion.
Change in memory:
Flash: -208 bytes
SRAM: 0 bytes
2023-08-17 07:52:55 +02:00
3ccf2d60c0
Make bed correction matrix const
2023-08-17 07:52:55 +02:00
be3465cf18
optimize lambda expression capture
...
flash: -10
2023-08-17 07:52:55 +02:00
2d0b96fe6a
Bed correction code optimization
...
flash: -44
2023-08-17 07:52:55 +02:00
5b8c65e342
Minor magnet elimination optimization
...
flash: -4B
2023-08-17 07:52:55 +02:00
67945579de
G80 minor optimization
2023-08-17 07:52:55 +02:00
a5c20a1c6e
Do not plan a Z move if no move is actually performed
2023-08-17 07:52:55 +02:00
de98551691
Extract hardcoded value
2023-08-17 07:52:55 +02:00
40db9c9258
Fix eeprom mesh offset
2023-08-17 07:52:55 +02:00
a7d3dd720b
Fix eeprom mesh interpolation
2023-08-17 07:52:55 +02:00
36d8de0727
G80 general fixes
...
Use interpolated eeprom mesh for skewed Z detection
Use the interpolated eeprom mesh for raising Z for the next point
Fix LCD countdown during MBL
2023-08-17 07:52:55 +02:00
b234560b22
MBL print function optimization
2023-08-17 07:52:55 +02:00
f94bc72235
Optimize G80 bed correction argument parsing
2023-08-17 07:52:55 +02:00
90c21425c6
Optimize is_bed_z_jitter_data_valid()
2023-08-17 07:52:55 +02:00
6c97907507
A bit more cleanup
2023-08-17 07:52:55 +02:00
6af5f5e2a2
Some code cleanup around homing_feedrate
2023-08-17 07:52:55 +02:00
83879fd10c
Cleanup magnet compensation code
2023-08-17 07:52:55 +02:00
46710c4b4e
G80 code cleanup
2023-08-17 07:52:55 +02:00
07b9447ee1
Fix correction nMeasPoints
2023-08-17 07:51:15 +02:00
fbfc6bf4a5
MBL remove MBL_BILINEAR
2023-08-17 07:51:15 +02:00
8edfff39e4
MBL code cleanup
2023-08-17 07:51:15 +02:00
a4ef72b1fc
Use mesh from eeprom during print area MBL
2023-08-17 07:51:15 +02:00
7b9f2086f4
MBL print area initial implementation
2023-08-17 07:51:15 +02:00
11e1806e0c
Gcode documentation
2023-08-17 07:51:15 +02:00
cfc8ffe8a3
cmake: Set source epoch from the HEAD commit
...
Allow to set the source epoch of the build with
PROJECT_VERSION_TIMESTAMP.
When unset fetch the commit timestamp of the current HEAD automatically
instead of leaving the source as 0. This fixes the firmware DATE
information in the support menu.
2023-08-17 07:46:47 +02:00
c4f48a6606
MMU: Disable FINDA runout during Homing and MBL
...
If for some reason a user added a extrusion move in the firmware. Prevent FINDA runout
from triggering.
Change in memory:
Flash: +16 bytes
SRAM: 0 bytes
2023-08-17 07:43:59 +02:00
Guðni Már Gilbert
Yuri D'Elia
D.R.racer
3d-gussner
Alex Voinea