josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8,284 Commits 31 Branches 140 Tags 71 MiB
Commit Graph

6297 Commits

Author SHA1 Message Date
Guðni Már Gilbert b3a682d330 Always re-init the TMC drivers after leaving linearity correction menu 
Change in memory:
Flash: -22 bytes
SRAM: 0 bytes
 2024-09-01 22:14:25 +00:00
gudnimg 312f79c5f5 optimisation: Simplify saving linearity correction 
Keep in mind that the EEPROM addresses are in descending order. This means we
can't use eeprom_read_block() or eeprom_update_block()

Address --> Axis
3831 --> X-axis
3830 --> Y-axis
3829 --> Z-axis
3828 --> E-axis

Change in memory:
Flash: -118 bytes
SRAM: 0 bytes
 2024-09-01 12:34:00 +00:00
Guðni Már Gilbert aa8569600c Fix build and make sm4 a C++ file 2024-09-01 12:12:24 +00:00
Guðni Már Gilbert a2d45e5d11 cleanup: remove unused global sm4_cpu_time 2024-09-01 12:11:56 +00:00
Guðni Már Gilbert f115adf894 cleanup: remove unused function sm4_get_dir 2024-09-01 12:11:56 +00:00
Guðni Már Gilbert 5a5c68f563 cleanup: remove unused function sm4_get_dir_bits 2024-09-01 12:11:56 +00:00
Guðni Már Gilbert 7d3c416d04 cleanup: remove unused function sm4_line_xyze_ui 
No change in code size. Reason for removing this function
is just to reduce lines of code that is maintained.
 2024-09-01 12:11:22 +00:00
3d-gussner 6c99a4463e
Merge pull request #4755 from sarusani/AddLoadIfAutoloadDisabled 
Add "load filament" if autoload is disabled
 2024-08-30 17:11:37 +02:00
sarusani a259482b6b Add load option if autoload is disabled 2024-08-30 14:48:45 +02:00
3d-gussner 923f926223
Merge pull request #4749 from gudnimg/remove-auto-bed-leveling 
Remove legacy Auto Bed Leveling code
 2024-08-30 10:44:50 +02:00
3d-gussner b353f1f008 Add missing translations 
Used `trans -b :cs+de+es+fr+hr+hu+it+nl+no+pl+ro+sk+sv "<text>"` to translate
Looked at pre-translated text to reuse as much as possible.
 2024-08-26 10:02:56 +02:00
3d-gussner c1360d7bfb Fix LCD output 
Configuration->HW Setup->Checks showed `a`

MSG_FILAMENT `Filament` can only be 8 chars long and only ES and IT had `Filemanto` as translation.
But as ES the `o` in `Filamento` was overwritten by `[Estricto]` I removed the MSG_FILAMENT to be translated.
Saves few bytes.
 2024-08-26 09:20:05 +02:00
gudnimg f7e3195d78 Remove CUSTOM_M_CODES define 2024-08-24 16:33:00 +00:00
Guðni Már Gilbert 2b1c49dae2 Remove legacy Auto Bed Leveling code 
The goal is to clean up the project
 2024-08-24 07:11:38 +00:00
Guðni Már Gilbert f5fe658728 fixup after rebase 2024-08-24 07:10:24 +00:00
Guðni Már Gilbert 5e66e71a48 Check if MMU is enabled by reading EEPROM 2024-08-24 07:10:24 +00:00
gudnimg 4ed5b36199 Use a fresh EEPROM cell for the new value 2024-08-24 07:10:24 +00:00
gudnimg 40d3830e6d Simplify filament_presence_check usage 
Pull all checks needed into the function such that the caller
only needs to check the return value

Also added description for the filament_presence_check function
 2024-08-24 07:10:23 +00:00
gudnimg 75c980c4e7 optimisation: deduplicate more code 
Change in memory:
Flash: -54 bytes
SRAM: 0 bytes
 2024-08-24 07:10:23 +00:00
Guðni Már Gilbert b7caf36207 optimisation: deduplicate printer check toggle menus 
This saves ~100B of flash
 2024-08-24 07:10:23 +00:00
Guðni Már Gilbert bf72ecc3f9 Add filament presence check at start of print 
A new menu setting is added to configure how strict the check should be.

- None: No check is performed
- Warning (default): The user is warned about missing and is prompted to continue with Yes/No. If No is selected, the print is aborted. If no user input is given (e.g. from host printing) then the warning will expire in 30 seconds and assume the Yes option was selected
- Strict: If the filament is not detected when a print is started, it is immediately canceled.

The check is currently performed on G-codes: M24 and M75. Starting a SD print and Host print respectively.
 2024-08-24 07:10:23 +00:00
3d-gussner 055f601ad3
Merge pull request #4751 from sarusani/FilamentRunoutActions 
Send host actions on filament runout
 2024-08-23 15:13:08 +02:00
3d-gussner 8fe73a0dc2 Update to MMU FW 3.0.3 2024-08-23 14:31:49 +02:00
3d-gussner c27fb616e0
Merge pull request #4737 from sarusani/ReplaceSetReadyMenuEntry 
Allow to replace Set Ready menu entry
 2024-08-23 14:30:44 +02:00
sarusani a2022471ce Send host actions on filament runout 2024-08-23 10:44:38 +02:00
sarusani a9e7f387e8 Replace Set Ready menu entry 
Replace "Set Ready"/"Set nor Ready" menu entry with "Print from host" entry.
Use "action:start" instead of "action:ready"
 2024-08-23 10:24:01 +02:00
sarusani 64d9f201da Exit Nozzle Change if filament is loaded 
Abort Nozzle change if fsensor is enabled and filament is present.
 2024-08-23 10:12:01 +02:00
Panayiotis-git 815b68678d M600 - Show filament name at the Insert filament prompt 2024-08-21 20:56:13 +03:00
3d-gussner f64f2bbe68
Merge pull request #4747 from gudnimg/minor-fixes-for-future-tests 
Fix compiler warning and add missing includes in unit test environment
 2024-08-20 11:14:06 +02:00
3d-gussner e2e6999887
Merge pull request #4753 from gudnimg/remove-HEATER_BED_DUTY_CYCLE_DIVIDER 
Remove dead configuration `HEATER_BED_DUTY_CYCLE_DIVIDER`
 2024-08-19 08:47:22 +02:00
Guðni Már Gilbert 3da141b3a7 Remove dead configuration HEATER_BED_DUTY_CYCLE_DIVIDER 
Setting HEATER_BED_DUTY_CYCLE_DIVIDER has no effect on the firmware
 2024-08-15 17:58:07 +00:00
sarusani d3f2dce430 Lower MIN_Z_FOR_UNLOAD 
Sync value with Buddy firmware
 2024-08-14 12:09:41 +02:00
Guðni Már Gilbert 80f27618c9 Marlin: drop lcd.h include 
Only include it where needed
 2024-08-13 23:40:18 +00:00
Guðni Már Gilbert 41245b2a59 Marlin: drop mmu2.h include 
We should only be including it where needed
 2024-08-13 23:26:09 +00:00
Guðni Már Gilbert 835caa0230 mesh_bed_calibration: drop Marlin.h include 2024-08-13 23:23:21 +00:00
Guðni Már Gilbert 0153eb05a1 util: add stdio.h include for sprintf_P 2024-08-09 14:57:07 +00:00
Guðni Már Gilbert a1fcb8564e util: reorder includes alphabetically 
Place system includes on top
 2024-08-09 14:57:07 +00:00
gudnimg f628c5f912 util: should include avr/eeprom.h 
The file is calling eeprom_read_byte and should include avr/eeprom.h
 2024-08-09 14:57:07 +00:00
gudnimg 9ae8beacc6 eeprom: add missing include stddef.h 
Fixes compiler warning in test environment:

Prusa-Firmware/Firmware/eeprom.h:712:51: error: ‘size_t’ has not been declared
712 | bool eeprom_is_initialized_block(const void *__p, size_t __n);
      |
 2024-08-09 14:57:07 +00:00
gudnimg ad1e3cb12a Configuration: missing stdint.h include 
The following error is raised in unit testing environment:

Prusa-Firmware/Firmware/Configuration.h:16:14: error: ‘uint16_t’ does not name a type
   16 | extern const uint16_t _nPrinterType;
 2024-08-09 14:57:07 +00:00
gudnimg 10d156b28c tests: Fix a compiler warning in tests -fpermissive 
Prusa-Firmware/tests/../Firmware/util.h:114:25: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
  114 |         pStrEnd = strchr(this->ptr, '"');
      |                   ~~~~~~^~~~~~~~~~~~~~~~
      |                         |
      |                         const char*
 2024-08-09 14:57:07 +00:00
3d-gussner 428091b7c7
Merge pull request #4736 from gudnimg/cleanup_recursion_hack 
Remove recursion workaround in Nozzle Change
 2024-08-08 11:17:28 +02:00
gudnimg efc4cc4996 Remove unused enum MeshLevelingState 2024-08-03 16:48:08 +00:00
gudnimg 15670f21bd lcd_pick_babystep() doesn't exist anywhere 2024-08-03 16:32:41 +00:00
gudnimg 371c040e8a EEPROM_BABYSTEP_Z0 is no longer used anywhere in the code base 2024-08-03 16:32:20 +00:00
Guðni Már Gilbert 25a11bb7d7 Forbid LcdUpdateDisabler to call lcd_update() 
The fixes a scenario where:

lcd_status_screen() calls lcd_commands() upon exiting
lcd_show_fullscreen_message_and_wait_P(_T(MSG_NOZZLE_CNG_READ_HELP));
and so not allowing the user to leave the screen since it will keep being rendered endlessly.

This change only affects lcd_show_fullscreen_message_and_wait_P
 2024-08-03 15:43:08 +00:00
Guðni Már Gilbert f96cc2f400 cleanup recursion workaround in nozzle change 
This fix is no longer needed today.

LCD knob clicks / and rotation, take care of updating lcd_draw_update.

The real bug was likely lcd_show_multiscreen_message_yes_no_and_wait_P calling lcd_update(), this is fixed now since.
 2024-08-03 15:43:08 +00:00
Guðni Már Gilbert ff16bfd8fa
Merge pull request #4739 from gudnimg/prune-disabled-code 
Remove a bit of unused code which is disabled at compile time
 2024-08-03 10:34:40 +00:00
Guðni Már Gilbert 23f92b24b8
Merge pull request #4735 from gudnimg/cleanup-dead-variable 
Remove commented variable `load_filament_time`
 2024-08-02 16:10:17 +00:00
Guðni Már Gilbert 04a7175cc7 Remove LARGE_FLASH preprocessor symbol 
It's not very useful as is ... probably remnant from Marlin 1
 2024-07-31 12:06:35 +00:00
Guðni Már Gilbert 81f1ec4975 Remove unused messages 2024-07-31 11:57:49 +00:00
Guðni Már Gilbert 0d45228dbd Remove commented lcd_update_enable(true) 2024-07-31 11:15:39 +00:00
gudnimg 396a8ca4f9 Remove VT100 code 2024-07-31 10:35:18 +00:00
gudnimg eb7969441a Remove Servo..h/cpp 2024-07-31 10:31:05 +00:00
gudnimg 2cbbdbacd5 Remove a bit of unused code which is disabled at compile time 
Some of these have been used > 6 years and don't compile anymore.

Reason to want this removed is just to reduce the code we maintain
 2024-07-31 09:53:45 +00:00
sarusani d485e4fb0b Add type to save 50B 
Saves 50bytes
 2024-07-30 15:15:05 +02:00
Guðni Már Gilbert bb1bb4d717 Remove commented variable load_filament_time 2024-07-28 17:41:23 +00:00
gudnimg 8382815110 Fix inconsistent indendation in mFilamentPrompt() 2024-07-26 11:55:32 +00:00
gudnimg faa01b5a5f Fix an issue where mFilamentPrompt menu times out 
Fixes a regression introduced in 3.13.0 here: a7e9ccfb57 (diff-5fbfdca43c192573e31d8e78d255c510fb6e213b118cf38173277ec2a2163880R7462)

Before 3.13.0, the menu never timed out until the safety timer turned off the heaters
After 3.13.0, the menu times out after 30 seconds.

The commit restores pre-3.13.0 behavior
 2024-07-26 11:52:20 +00:00
3d-gussner 3722a17e5a
Merge pull request #4647 from gudnimg/mmu-sync-april 
MMU maintenance: Sync with 32-bit FW a little bit
 2024-07-24 10:02:24 +02:00
gudnimg 4dc9fd4972 MMU: revert fallthrough in LogicStep 2024-07-23 15:55:47 +00:00
gudnimg a7004cd067 Fix an issue in manual fan check where prior knob clicks are not consumed 2024-07-15 13:52:30 +00:00
gudnimg 99e306f4a3 MMU: minor formatting sync 2024-07-06 17:24:40 +00:00
gudnimg d548bb68fd MMU: revert WaitForHotendTargetTempBeep(); position in code 
The 8-bit FW uses a different Fullscreen UI which doesn't show the current temperature. So, for now, keep calling WaitForHotendTargetTempBeep  before showing the full-screen message.
 2024-07-06 16:55:32 +00:00
Guðni Már Gilbert 09f1d85e9c MMU: Revert changes to execute_extruder_sequence loop 
The previous for-loop is more memory efficient and saves 20 bytes of Flash
 2024-07-06 16:55:32 +00:00
Guðni Már Gilbert 61b4270129 MMU: allow inlining UInt16ToHex 
Saves 22 bytes of Flash
 2024-07-06 16:55:32 +00:00
Guðni Már Gilbert 592fc56bfc MMU: Sync code with 32-bit 
The changes in this commit are mainly formatting

But there are some changes like adding a new function planner_draining()
 2024-07-06 16:55:32 +00:00
sarusani 5efae44eb7 Delay Z-Axis on Autoload 
Delay z-axis movement when the operators hand is close to the printhead.
 2024-07-05 16:12:07 +02:00
3d-gussner bc48d34a2f Replace hradecoded XYZ Z correction value with Z_MAX_POS_XYZ_CALIBRATION_CORRECTION 2024-07-04 10:12:38 +02:00
3d-gussner 152b290d1d
Merge pull request #4689 from 3d-gussner/MK3_PFW-964 
PFW-964: Skip filament unload/load after Shipping factory reset
 2024-07-03 13:20:49 +02:00
3d-gussner 45a223a1f9 Remove White spaces 2024-05-20 19:09:03 +02:00
3d-gussner e110153ee2 Cleanup doxgen documentation and white spaces 2024-05-20 18:35:09 +02:00
3d-gussner 9a56f1e4c1 Skip filament unload/load after Shipping factory reset 
when MMU is enabled. With MMU enabled no filament should be
loaded while idle.
 2024-05-16 12:48:49 +02:00
Guðni Már Gilbert 6f915ee401 MMU: Add workaround for broken Tune button 
If the MMU is processing a command, the Tune button can't be executed.

Change in memory:
Flash: +16 bytes
SRAM: 0 bytes
 2024-05-04 00:22:17 +00:00
3d-gussner 08d26fdee2 Replace hard coded crash z lift value with Z lift value. 
With `M125 Z<value>` you can set the Z lift value via gcode as requested.
Fixes #3419
 2024-05-02 11:37:13 +02:00
gudnimg 28502a2b6e optimisation: remove 1 more call to __divsf3 
Changing (feedrate * feedmultiply) / 6000.f
to (feedrate * feedmultiply) * (1.f / 6000.f)

Replaces the call to __divsf3 with __mulsf3 which is better

No change in memory
 2024-04-23 09:18:45 +02:00
Guðni Már Gilbert 2c46e1b344 optimisation: remove 3 calls to __divsf3 
Change in memory:
Flash: -34 bytes
SRAM: 0 bytes
 2024-04-23 09:18:45 +02:00
3d-gussner d22245b482
Merge pull request #4658 from 3d-gussner/MK3_PFW-762_Ambient_shutdown_80C 
PFW-762 ambient shutdown at 80 C
 2024-04-19 15:06:03 +02:00
3d-gussner e8d55486fe
Merge pull request #4661 from gudnimg/PFW-1557 
PFW-1557 MMU: Improve unload handling when print is aborted
 2024-04-15 15:13:09 +02:00
3d-gussner 6e40fe05fc
Merge pull request #4657 from 3d-gussner/MK3_PP_ACCEL_JERK 
Add max acceleration mm per s2, feedrates and jerk save and restor du…
 2024-04-15 15:11:57 +02:00
3d-gussner 51b119a3ec Fix Autoreport broken in 3957dc91aa 2024-04-15 12:09:43 +02:00
3d-gussner 1292a82f70 Fix typos 2024-04-15 07:45:36 +02:00
3d-gussner f50e754f26 Use of `eeprom_update_block_notify` and `eeprom_read_block` reduces the flash usage a lot. 
Thanks to @gudnimg
 2024-04-15 07:45:36 +02:00
3d-gussner 5c0e014215 Add max acceleration mm per s2, feedrates and jerk save and restor during power panic 
Thanks to @wavexx in #2456
 2024-04-15 07:45:36 +02:00
gudnimg 16dfcfeb9a MMU: Improve unload handling when print is aborted 
- Don't allow re-heating the nozzle or the MMU to unload the filament if the print was aborted by a temperature error
- Allow MMU to unload filament if there is no temperature error, and there is no fan error when Fan check is enabled
- When Fan check is disabled, the MMU may unload if there is no temperature error

Change in memory:
Flash: +14 bytes
SRAM: 0 bytes

PFW-1557
 2024-04-14 12:07:56 +00:00
3d-gussner 52ac95f082
Merge pull request #4600 from sarusani/ChangeRevoNozzleChangeMenu 
Adjust Nozzle Change Menu For Quick Change Nozzles
 2024-04-11 19:19:01 +02:00
3d-gussner 361ce65e5c
Merge pull request #4644 from sarusani/AddEjectToFilamentLoadMSG 
Add Eject Option To Filament Load Message
 2024-04-11 19:18:42 +02:00
3d-gussner 36282aae1b Change Ambient board thermistor safety shutdown to 80 C 2024-04-10 17:56:26 +02:00
sarusani bc04f16906 Adjust Nozzle Change Menu For Quick Change Nozzles 
- Show warning if extruder temp is > 40 degrees
- Use fan to speed up cooldown
- Show confirmation msg
- Show nozzle diameter setting after nozzle change
 2024-04-09 16:12:46 +02:00
sarusani bd935db31e Add Eject Option To Filament Load Message 2024-04-09 15:50:17 +02:00
3d-gussner e5d504b855 Add Extrude mintemp save and restore during power panic 
Thanks to @wavexx in #3008
 2024-04-09 09:34:24 +02:00
3d-gussner 02822c59ad
Merge pull request #4591 from gudnimg/cleanup_cancel_heatup 
Remove redundant ` cancel_heatup` assignment
 2024-04-09 08:17:09 +02:00
3d-gussner fbbcdd0808
Merge pull request #4613 from gudnimg/optimise-axis_ustep_resolution 
optimisation: initialise `axis_ustep_resolution` in EEPROM
 2024-04-08 16:13:52 +02:00
3d-gussner ed9d7f3ac1 ultralcd: merge two functions into one 
lcd_show_fullscreen_message_yes_no_and_wait_P and lcd_show_multiscreen_message_yes_no_and_wait_P
are the same function. Let's drop one of them so we only have one symbol for the function.

No change in memory

Fix rebase
 2024-04-05 19:33:15 +02:00
3d-gussner a4a7b09fe7
Merge pull request #4651 from 3d-gussner/MK3_Fix_Insert_filament_fr_hu 
Fix issue Insert filament ... message in French and Hungarian
 2024-04-04 09:20:48 +02:00
3d-gussner feebac54fc Fix issue #4424 
Fix rebase
 2024-04-04 09:08:44 +02:00
3d-gussner b3a410abdc Fix #3361 2024-04-04 09:04:48 +02:00
3d-gussner a93cd93756 Move `MK3 firmware detected on MK3S printer` and `MK3S firmware detected on MK3 printer` to `messages.cpp/.h` 
Update pot and po files
 2024-04-04 08:58:46 +02:00
3d-gussner 97584d571e Update all `_i("` to `messages.cpp/.h` 
Update `lang/po/*.po*` files
 2024-04-04 08:23:40 +02:00
3d-gussner af03662c8f
Merge pull request #4602 from 3d-gussner/MK3_M913 
Enable M913
 2024-04-04 07:30:06 +02:00