81f1ec4975
Remove unused messages
2024-07-31 11:57:49 +00:00
0d45228dbd
Remove commented lcd_update_enable(true)
2024-07-31 11:15:39 +00:00
396a8ca4f9
Remove VT100 code
2024-07-31 10:35:18 +00:00
eb7969441a
Remove Servo..h/cpp
2024-07-31 10:31:05 +00:00
2cbbdbacd5
Remove a bit of unused code which is disabled at compile time
...
Some of these have been used > 6 years and don't compile anymore.
Reason to want this removed is just to reduce the code we maintain
2024-07-31 09:53:45 +00:00
d485e4fb0b
Add type to save 50B
...
Saves 50bytes
2024-07-30 15:15:05 +02:00
bb1bb4d717
Remove commented variable load_filament_time
2024-07-28 17:41:23 +00:00
8382815110
Fix inconsistent indendation in mFilamentPrompt()
2024-07-26 11:55:32 +00:00
faa01b5a5f
Fix an issue where mFilamentPrompt menu times out
...
Fixes a regression introduced in 3.13.0 here: a7e9ccfb57 (diff-5fbfdca43c192573e31d8e78d255c510fb6e213b118cf38173277ec2a2163880R7462)
2024-07-26 11:52:20 +00:00
3722a17e5a
Merge pull request #4647 from gudnimg/mmu-sync-april
...
MMU maintenance: Sync with 32-bit FW a little bit
2024-07-24 10:02:24 +02:00
4dc9fd4972
MMU: revert fallthrough in LogicStep
2024-07-23 15:55:47 +00:00
a7004cd067
Fix an issue in manual fan check where prior knob clicks are not consumed
2024-07-15 13:52:30 +00:00
99e306f4a3
MMU: minor formatting sync
2024-07-06 17:24:40 +00:00
d548bb68fd
MMU: revert WaitForHotendTargetTempBeep(); position in code
...
The 8-bit FW uses a different Fullscreen UI which doesn't show the current temperature. So, for now, keep calling WaitForHotendTargetTempBeep before showing the full-screen message.
2024-07-06 16:55:32 +00:00
09f1d85e9c
MMU: Revert changes to execute_extruder_sequence loop
...
The previous for-loop is more memory efficient and saves 20 bytes of Flash
2024-07-06 16:55:32 +00:00
61b4270129
MMU: allow inlining UInt16ToHex
...
Saves 22 bytes of Flash
2024-07-06 16:55:32 +00:00
592fc56bfc
MMU: Sync code with 32-bit
...
The changes in this commit are mainly formatting
But there are some changes like adding a new function planner_draining()
2024-07-06 16:55:32 +00:00
5efae44eb7
Delay Z-Axis on Autoload
...
Delay z-axis movement when the operators hand is close to the printhead.
2024-07-05 16:12:07 +02:00
bc48d34a2f
Replace hradecoded XYZ Z correction value with Z_MAX_POS_XYZ_CALIBRATION_CORRECTION
2024-07-04 10:12:38 +02:00
152b290d1d
Merge pull request #4689 from 3d-gussner/MK3_PFW-964
...
PFW-964: Skip filament unload/load after Shipping factory reset
2024-07-03 13:20:49 +02:00
45a223a1f9
Remove White spaces
2024-05-20 19:09:03 +02:00
e110153ee2
Cleanup doxgen documentation and white spaces
2024-05-20 18:35:09 +02:00
9a56f1e4c1
Skip filament unload/load after Shipping factory reset
...
when MMU is enabled. With MMU enabled no filament should be
loaded while idle.
2024-05-16 12:48:49 +02:00
6f915ee401
MMU: Add workaround for broken Tune button
...
If the MMU is processing a command, the Tune button can't be executed.
Change in memory:
Flash: +16 bytes
SRAM: 0 bytes
2024-05-04 00:22:17 +00:00
08d26fdee2
Replace hard coded crash z lift value with Z lift value.
...
With `M125 Z<value>` you can set the Z lift value via gcode as requested.
Fixes #3419
2024-05-02 11:37:13 +02:00
28502a2b6e
optimisation: remove 1 more call to __divsf3
...
Changing (feedrate * feedmultiply) / 6000.f
to (feedrate * feedmultiply) * (1.f / 6000.f)
Replaces the call to __divsf3 with __mulsf3 which is better
No change in memory
2024-04-23 09:18:45 +02:00
2c46e1b344
optimisation: remove 3 calls to __divsf3
...
Change in memory:
Flash: -34 bytes
SRAM: 0 bytes
2024-04-23 09:18:45 +02:00
d22245b482
Merge pull request #4658 from 3d-gussner/MK3_PFW-762_Ambient_shutdown_80C
...
PFW-762 ambient shutdown at 80 C
2024-04-19 15:06:03 +02:00
e8d55486fe
Merge pull request #4661 from gudnimg/PFW-1557
...
PFW-1557 MMU: Improve unload handling when print is aborted
2024-04-15 15:13:09 +02:00
6e40fe05fc
Merge pull request #4657 from 3d-gussner/MK3_PP_ACCEL_JERK
...
Add max acceleration mm per s2, feedrates and jerk save and restor du…
2024-04-15 15:11:57 +02:00
51b119a3ec
Fix Autoreport broken in 3957dc91aa
2024-04-15 12:09:43 +02:00
1292a82f70
Fix typos
2024-04-15 07:45:36 +02:00
f50e754f26
Use of `eeprom_update_block_notify` and `eeprom_read_block` reduces the flash usage a lot.
...
Thanks to @gudnimg
2024-04-15 07:45:36 +02:00
5c0e014215
Add max acceleration mm per s2, feedrates and jerk save and restor during power panic
...
Thanks to @wavexx in #2456
2024-04-15 07:45:36 +02:00
16dfcfeb9a
MMU: Improve unload handling when print is aborted
...
- Don't allow re-heating the nozzle or the MMU to unload the filament if the print was aborted by a temperature error
- Allow MMU to unload filament if there is no temperature error, and there is no fan error when Fan check is enabled
- When Fan check is disabled, the MMU may unload if there is no temperature error
Change in memory:
Flash: +14 bytes
SRAM: 0 bytes
PFW-1557
2024-04-14 12:07:56 +00:00
52ac95f082
Merge pull request #4600 from sarusani/ChangeRevoNozzleChangeMenu
...
Adjust Nozzle Change Menu For Quick Change Nozzles
2024-04-11 19:19:01 +02:00
361ce65e5c
Merge pull request #4644 from sarusani/AddEjectToFilamentLoadMSG
...
Add Eject Option To Filament Load Message
2024-04-11 19:18:42 +02:00
36282aae1b
Change Ambient board thermistor safety shutdown to 80 C
2024-04-10 17:56:26 +02:00
bc04f16906
Adjust Nozzle Change Menu For Quick Change Nozzles
...
- Show warning if extruder temp is > 40 degrees
- Use fan to speed up cooldown
- Show confirmation msg
- Show nozzle diameter setting after nozzle change
2024-04-09 16:12:46 +02:00
bd935db31e
Add Eject Option To Filament Load Message
2024-04-09 15:50:17 +02:00
e5d504b855
Add Extrude mintemp save and restore during power panic
...
Thanks to @wavexx in #3008
2024-04-09 09:34:24 +02:00
02822c59ad
Merge pull request #4591 from gudnimg/cleanup_cancel_heatup
...
Remove redundant ` cancel_heatup` assignment
2024-04-09 08:17:09 +02:00
fbbcdd0808
Merge pull request #4613 from gudnimg/optimise-axis_ustep_resolution
...
optimisation: initialise `axis_ustep_resolution` in EEPROM
2024-04-08 16:13:52 +02:00
ed9d7f3ac1
ultralcd: merge two functions into one
...
lcd_show_fullscreen_message_yes_no_and_wait_P and lcd_show_multiscreen_message_yes_no_and_wait_P
are the same function. Let's drop one of them so we only have one symbol for the function.
No change in memory
Fix rebase
2024-04-05 19:33:15 +02:00
a4a7b09fe7
Merge pull request #4651 from 3d-gussner/MK3_Fix_Insert_filament_fr_hu
...
Fix issue Insert filament ... message in French and Hungarian
2024-04-04 09:20:48 +02:00
feebac54fc
Fix issue #4424
...
Fix rebase
2024-04-04 09:08:44 +02:00
b3a410abdc
Fix #3361
2024-04-04 09:04:48 +02:00
a93cd93756
Move `MK3 firmware detected on MK3S printer` and `MK3S firmware detected on MK3 printer` to `messages.cpp/.h`
...
Update pot and po files
2024-04-04 08:58:46 +02:00
97584d571e
Update all `_i("` to `messages.cpp/.h`
...
Update `lang/po/*.po*` files
2024-04-04 08:23:40 +02:00
af03662c8f
Merge pull request #4602 from 3d-gussner/MK3_M913
...
Enable M913
2024-04-04 07:30:06 +02:00
8d1be264e5
Thanks to @gudnimg pointing out duplicate if statements that are covered by the top-level if statement.
2024-03-27 17:44:50 +01:00
9e8aadd8af
Revert split if statements
...
Kept few as these get too long
2024-03-27 10:15:07 +01:00
5f26d5f7da
Fix MK2.5 builds
...
- removed `reset_uvlo` as `#ifdef UVLO_SUPPORT` everywhere for MK2.5 is a huge change.
2024-03-27 09:42:59 +01:00
1ac69247d7
Fix and improve PowerPanic
...
- No wait for heatup during host print recovery
- No extra Z lift when power panic happens during paused print
- added an extra EEPROM value
- fixed `EEPROM_LAST_ITEM`
- changed EEPROM version to 3.14.0
- Added `reset_uvlo` function
2024-03-27 09:09:55 +01:00
52275322a2
Remove redundant check
2024-03-20 08:41:29 +01:00
b6e2a8875b
M913 report rescaled currents
2024-03-15 12:47:18 +01:00
2df8a18fde
Fix MK2.5/S builds
2024-03-15 12:47:18 +01:00
82d102d740
Enable M913
2024-03-15 12:47:18 +01:00
9f8115639a
LCD menu
...
- Hide menus during recovering
- Un-/Load filament with FSensor active only show Load OR Unload depending on FS sate
- Host
- Reprint only shown when M79 timer is active
- Resume only shown when M79 timer active
- Stop print always shown when printing, paused and recovering
2024-03-13 17:43:00 +01:00
a04063f966
Fix DEBUG_UVLO_AUTOMATIC_RECOVER
2024-03-13 17:43:00 +01:00
e2823c3c35
Reset EEPROM_UVLO after recovering
...
Undo PP Z lift
2024-03-13 17:43:00 +01:00
9e52b78285
Add ubs_timer.start to PRUSA uvlo
...
Cleanup format
2024-03-13 17:43:00 +01:00
15ea2784c3
Fix another saved_printing_type issue
2024-03-13 17:43:00 +01:00
4e032f6f11
Change to saved_printing_type fixes few issues during power panic recovery
2024-03-13 17:43:00 +01:00
fc157d1f6c
Fix missing eeprom_update_byte for debuging
2024-03-13 17:43:00 +01:00
5b7c583dba
Fix `print_saved_in_ram` to be true for both SD and host prints
2024-03-13 17:43:00 +01:00
9ec5639d29
Rename `sd_print_saved_in_ram` to `print_saved_in_ram` as it saves sd and host prints
2024-03-13 17:43:00 +01:00
112d3c672c
Update debug_printer_states
2024-03-13 17:43:00 +01:00
16aa2e7834
Hide LCD menu "Reprint" during power panic recovery
2024-03-13 17:43:00 +01:00
886d610524
Cancle power recovery correctly using cancel_saved_printing();
2024-03-13 17:43:00 +01:00
95c6ea5889
Fix to correct EEPROM address
2024-03-13 17:42:59 +01:00
47235bbf62
Power panic recover lift by 20 Z_PAUSE_LIFT only once
...
by setting PENDING_RECOVERY_RETRY
Also the default saved_printing_type after a reboot is now PRINT_TYPE_NONE
2024-03-13 17:42:59 +01:00
88b77ecce2
Add bool printer_recovering
2024-03-13 17:42:59 +01:00
517900c3fe
Add DEBUG_PRINTER_STATES
2024-03-13 17:42:59 +01:00
4bca4021c6
Bump up MMU FW version to 3.0.2
...
.
2024-03-04 11:55:54 +01:00
f9bdb8b8aa
Add DEBUG_EEPROM_CHANGES
2024-02-27 08:56:18 +01:00
af64d446bf
Fix MK2.5 build
2024-02-26 10:14:01 +01:00
aededa34bb
Properly check for Z crashes while lowering/raising Z for Z calibration
2024-02-26 10:13:56 +01:00
326019a8bf
Use stallguard during Z calibration after XYZ calibration
2024-02-26 10:13:51 +01:00
692f062fee
Add tmc currents debug
2024-02-26 10:13:45 +01:00
0a727d8573
optimisation: initialise axis_ustep_resolution in EEPROM
...
When the cs variable is loaded into RAM, cs.axis_ustep_resolution will always have some value and none of the 0xff values.
Change in memory:
Flash: -40 bytes
SRAM: 0 bytes
2024-02-24 15:46:32 +00:00
ccb956eae4
Restore custom currents after homing end
2024-02-19 15:33:06 +01:00
e6a4856196
Restore default XY currents after homing
2024-02-19 15:32:22 +01:00
dc3b3387ed
Merge pull request #4593 from 3d-gussner/MK3_Fix_Stop_print_for_host_prints
...
Fix Stop print to send host action when host print is active
2024-02-05 10:39:49 +01:00
727a82bb3d
Fix Stop print to send host action when host print is active
2024-02-05 08:14:10 +01:00
020239687a
Remove redundant cancel_heatup assignment
...
cancel_heatup is set to false inside wait_for_heater()
there is no need to do it before the function call
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2024-02-04 12:15:58 +00:00
794251884a
PFW-1552 Fix a regression introduced in f022567
...
Aborting the print while the nozzle and bed are still heating up
to their target temperatures should disable the heaters immediately.
2024-02-04 12:06:14 +00:00
bacb0b1b07
Fix 3x3 mbl condition
2024-02-02 14:45:30 +01:00
6682237c7a
Merge pull request #4582 from gudnimg/PFW-1552
...
PFW-1552 and PFW-1544: Fix issue with MMU unload when a print is stopped with a cold nozzle
2024-02-01 06:22:49 +01:00
e7ef3d6db5
Fix nitpicking
2024-01-29 13:07:48 +01:00
52ba1b534d
Add HOST power panic auto recovery option
...
Change `PRINT_TYPE_USB` to `PRINT_TYPE_HOST`
Fix more rebase issues
Fix rebase issue again
2024-01-29 13:07:48 +01:00
ffeda98894
Add power panic recovery to active state
...
Fix M79 send only recovery action when power panic recovery is pending
Fix rebase issues
2024-01-29 13:07:48 +01:00
d1b88e1684
Don't show `Print from SD` when host print is paused
2024-01-29 13:07:48 +01:00
c9aba688e3
Saving few bytes by removing spaces in `//action:` host commands. Thanks to @sarusani pointing out inconsistent documentation.
...
Renaming `MSG_OCTOPRINT_*` to `MSG_HOST_ACTION_*` as it is used also with PrusaLink and other host printing solutions
Fix rebase issues
2024-01-29 13:07:48 +01:00
fda30f82c8
Don't show `Set Ready`when not idle
2024-01-29 13:07:48 +01:00
abcb1017f3
PFW-1553 fix regression where SD card file is not closed when stopping paused print
...
When a print is paused, card.sdprinting is set to false. Instead we can check
if the SD card has been mounted and try to close the file.
The closefile() method will check internally whether or not the file is open.
2024-01-27 15:21:08 +00:00
f022567239
PFW-1522 Fix an issue where MMU unloads while nozzle is cold if print is stopped
...
In the case of a Fan Error, the print is paused. If the nozzle is allowed to cool for a while before the print is stopped via the LCD, then the MMU will try to unload with a cold nozzle.
This can happen with ANY recoverable thermal errors.
In this commit I attempt to fix all scenarios. Including PFW-1544 where the nozzle is cooling down when the print has finished normally.
PFW-1544
PFW-1552
Change in memory:
Flash: +74 bytes
SRAM: 0 bytes
2024-01-27 11:54:54 +00:00
c0b76dd5cf
cleanup: move st_synchronize under the if statement
...
If the if statement is not true, then the st_synchronize call is not useful
The raise_z call above the if statement does not need it since it always calls st_synchronize (blocking move)
No change in memory
2024-01-27 10:47:23 +00:00
3957dc91aa
Add commit number and hash to `M115`
...
Don't show UUID only if defined
2024-01-22 16:31:23 +01:00
b80965731f
Merge pull request #4421 from gudnimg/sd-card-mount-opt
...
cleanup: Don't set root directory if SD card fails to mount + 3 renames
2024-01-22 09:11:19 +01:00
02b91dc2cb
Merge pull request #4563 from 3d-gussner/MK3_Quick_nozzle_change_menu
...
Add nozzle diameter change to main menu for REVO builds
2024-01-19 14:26:18 +01:00
6da1ec924b
Merge pull request #4567 from 3d-gussner/MK3_M850_show_active_sheet
...
M850 shows active sheet
2024-01-15 08:56:04 +01:00
339a10eb81
Merge pull request #4556 from gudnimg/usb-timer-fix
...
Restart USB timer during long moves
2024-01-12 14:41:51 +01:00
f3e5444d47
M850 shows active sheet
...
Prevent sheet being active if not initialized
2024-01-12 13:41:55 +01:00
13fb11889e
Minor cosmetic changes voted by community
2024-01-12 07:20:33 +01:00
adf2ecabc1
Fix pause indicator when print job timer is not used
...
Fixes #4554
Change in memory:
Flash: +50 bytes
SRAM: +1 byte
2024-01-11 19:30:30 +00:00
d5a5835059
Add nozzle change to main menu when QUICK_NOZZLE_CHANGE is defined
...
Add Nozzle diameter to Info screen when printer inactive and QUICK_NOZZLE_CHANGE defined
Solves #4488
2024-01-11 07:36:51 +01:00
8d50d29776
Merge pull request #4553 from sarusani/shutdownHostLCDEntry
...
Add Shutdown host to LCD Menu
2024-01-11 07:33:16 +01:00
f18fc2bbce
Fix Pause->Tune->Auto Home layer shift
2024-01-09 11:07:29 +01:00
ae31c0ec31
optimisation: used expired() instead of elapsed()
...
If the timer is expired, then the timer is stopped. This is OK since
we are starting the timer again anyway
Change in memory:
Flash: -14 bytes
SRAM: 0 bytes
2024-01-06 00:23:19 +00:00
09952db139
Restart USB timer during long moves
...
When long moves are planned and executed the USB timer can expire.
In PrusaSlicer 2.7.1 the Toolchange command (T0, T1, etc.) is sent while the USB timer is expired. This will trigger
a manual MMU unload in the firmware. Not only does this trigger a loud beep from the buzzer, but this will also significantly increase print time.
The issue only affects host prints. SD card printing does not have this issue.
Fixes #4551
The fix in this commit is the following:
If there are blocks queued while printing via host AND the USB timer is halfway expired WHILE executing a move. Then simply restart the timer to keep it alive.
Change in memory:
Flash: +62 bytes
SRAM: 0 bytes
2024-01-06 00:23:19 +00:00
59093107fd
Add #ifdef HOST_SHUTDOWN
2024-01-06 00:45:06 +01:00
49f9d7abdc
Add Shutdown host to LCD Menu
...
Add "Shutdown host" entry to LCD menu if printer is not active and host is connected.
2024-01-06 00:45:06 +01:00
db044163f9
Unify Selftest messages
2024-01-04 11:18:07 +01:00
9bd043c83b
Move restore_file_from_sd out of power panic file
...
This function is not specific to power panic. Some printer models
do not have power panic enabled.
This change fixes a build failure
No change in memory
2023-12-30 12:19:51 +00:00
ceec54f026
reprint: reduce duplicate code
...
restore_file_from_sd function now supports any
filename extension. If a print was finished (to allow reprinting) then the
EEPROM filename and extension should always be valid.
Change in memory:
Flash: -312 bytes
SRAM: 0 bytes
2023-12-30 12:06:46 +00:00
45d70b195d
Merge pull request #4405 from gudnimg/mmu-response-fix
...
MMU: always wait for a request's expected response
2023-12-22 16:34:27 +01:00
c9ea5fa746
Fix M850 output and documentation
2023-12-19 15:34:16 +01:00
15a3fb998c
Merge pull request #4541 from sarusani/actionReadyOpt
...
Remove leading M118 from "action:ready" & "action:not_ready"
2023-12-19 15:02:09 +01:00
2c4474b1dd
Remove leading "M118"
2023-12-16 12:51:17 +01:00
e5d6d72d23
Add #ifdef
2023-12-15 14:09:46 +01:00
1407f29362
Prevent oozing after filament load
...
Retract 10mm of filament after loading
2023-12-14 14:20:46 +01:00
c384524877
mmu: always wait for a request's expected response
...
If a planned request is activated when the current status is finished
then the firmware must wait for the response when the request
is expecting it
An example is a register read or a register write.
manage_response not return unless the register has been read or
written. And we must see the response to know if an error should be
reported.
Step to reproduce issue:
1. Fail selector homing
2. Select 'Tune' item
3. Observe issue. In this situation you can see the value
for the previous register read is shown. Which is 0. This very timing dependent and does not always happen.
4. Repeat step 2 until the issue appears. It may take a few times.
2023-12-10 12:54:18 +00:00
40786a24e0
Rename "cardOK" to "mounted"
...
Sync the Prusa firmware a little bit with Marlin 2.1
2023-12-09 10:52:26 +00:00
d94f263843
Rename initsd() to mount()
...
Sync the Prusa firmware with Marlin 2.1 a little bit.
2023-12-09 10:50:30 +00:00
42855f9f13
Rename setroot() to cdroot()
...
This way the name is the same as Marlin 2.1
2023-12-09 10:50:30 +00:00
e0eb8b8a24
optimisation: if SD card fails to mount, do not set root directory
...
I noticed this on Marlin 2.1 side, it should apply here as well.
2023-12-09 10:50:30 +00:00
1868839dc6
Fix cmake with tags starting with `t`
2023-12-05 15:42:47 +01:00
69b35d37c3
Bump up version
2023-12-05 14:53:56 +01:00
aa92375e62
Merge pull request #4523 from 3d-gussner/MK3_Improve_PP_Crash
...
Improve Host Power Panic and Crash
2023-12-05 14:49:33 +01:00
18daa5a62e
Merge pull request #2423 from Panayiotis-git/MK3_M600_Issue-2415
...
LCD option to unload new filament on M600 (issue #2415 )
2023-12-04 17:03:38 +01:00
e2aafc882c
Fix MSG_PRINT_PAUSED
...
MSG_PRINT_PAUSED used the lang declaration MSG_PAUSE_PRINT instead of MSG_PRINT_PAUSED
2023-12-03 10:16:16 +01:00
60e311d74f
Change reprint MENU_ITEM_SUBMENU_P to MENU_ITEM_FUNCTION_P
...
There's no submenu -> don't show arrow
2023-12-03 08:46:48 +01:00
4d9e084cf7
Rename lcd_reprint_usb_print to lcd_send_action_start
...
Sending action start can not only be used for reprints
2023-12-03 08:44:54 +01:00
d267140ee6
Rename reprint_from_eeprom to lcd_reprint_from_eeprom
...
It sets the lcd_return_to_status() at the end, so naming should be consistent witch the other functions
2023-12-03 08:43:16 +01:00
3da4407e4f
Repeat the M600 unload/load filament sequence - Fix translations
2023-12-01 21:13:24 +02:00
8ceda27cda
Provide option to repeat the M600 unload/load filament sequence
2023-12-01 21:12:31 +02:00
47b298782f
Set YES as default in Crash Resume message
2023-12-01 17:43:29 +01:00
d36ea24c02
After reset or low bed temp recover HOST print as the HOST has to decide what to do
...
Only during SD print and a Reset + Low Bed temp the user has to confirm on LCD
2023-12-01 17:43:29 +01:00
4bc6bc3f90
Improve USb power panic
2023-12-01 17:43:29 +01:00
4dfc484265
Merge pull request #4207 from gudnimg/crashdet_cancel-fixup
...
`crashdet_cancel()` doesnt cleanup all variables when USB printing
2023-12-01 17:41:33 +01:00
4d9dc11510
power panic: pause the print, and wait for M79
...
"PRUSA uvlo" is the last g-code to be processed after the power panic
recovery. For host prints, we want to finish processing all these
g-codes and put the print in a paused state.
Currently I am using lcd_pause_print() but this may be simplified
later.
A new PrinterState is introduced PowerPanicWaitingForHost to
differentiate this paused state from the typical paused state.
In this new paused state the printer is waiting for the host to boot up
and send M79.
Once M79 is seen a new action is sent "// action:uvlo_recovery_ready"
It is up to the host software to then resume the print correctly. All
the needed information to resume the print is in EEPROM and can
be read by using the D3 g-code.
Change in memory:
Flash: +82 bytes
SRAM: 0 bytes
2023-12-01 16:16:39 +01:00
02c5da198d
Enable EEPROM_UVLO flag for host prints
...
Change in memory:
Flash: -30 bytes
SRAM: 0 bytes
2023-12-01 16:16:39 +01:00
ce24d917e6
power panic: Only send M24 for SD prints
...
For host prints, we don't want to send M24.
Change in memory:
Flash: +16 bytes
SRAM: 0 bytes
2023-12-01 16:16:39 +01:00
67c7ad1c99
power panic: improve file position recovery
...
- Only queue M26 for SD prints
- Add M110 to set gcode_LastN for host prints
- Remove one debug log to save resource (52 bytes)
Change in memory:
Flash: -14 bytes
SRAM: 0 bytes
2023-12-01 16:16:39 +01:00
665c01804c
power panic: remove redundant lcd_setstatuspgm
...
If recover_print was never called, then there should be
no need to call lcd_setstatuspgm(MSG_WELCOME) since
the status line was not modified by the power panic feature.
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2023-12-01 16:16:39 +01:00
e2d0e9a2ee
power panic: remove redundant lcd update calls
...
lcd_show_fullscreen_message_yes_no_and_wait_P will
enable LCD update upon exit.
Change in memory:
Flash: -24 bytes
SRAM: 0 bytes
2023-12-01 16:16:39 +01:00
096a1c9fe0
Change Reprint action message to comply to OctoPrint actions
2023-11-30 15:08:48 +01:00
b37e39fdd9
Merge pull request #4427 from gudnimg/minor-stepper-opt
...
optimisation: stepper: make `dda_isteps_t` an array
2023-11-29 08:54:38 +01:00
3216ef863a
Merge pull request #4149 from gudnimg/tone-opt
...
use `uint16_t` instead of `uint32_t` when writing to OCR4C register
2023-11-29 08:26:54 +01:00
Guðni Már Gilbert
sarusani
3d-gussner
sarusani
Alex Voinea
D.R.racer
Panayiotis-git