We can't clear eFilamentAction in every case in mFilamentItem()
mFilamentItem() can trigger a call to M701 and M702 e.g. for Autoloading
and eFilamentAction must be cleared by the gcode to prevent
the user from triggering another Autoload (which will crashe the FW)
The same applies to submenus. Now the MMU submenus clear eFilamentAction
only when the action is done.
For MMU Unload Filament item, eFilamentAction is only cleared after
the unload_filament() call is done running. This fixes an issue where
the menu item can be selected again while the first unload is still
running.
Allow to set the source epoch of the build with
PROJECT_VERSION_TIMESTAMP.
When unset fetch the commit timestamp of the current HEAD automatically
instead of leaving the source as 0. This fixes the firmware DATE
information in the support menu.
If for some reason a user added a extrusion move in the firmware. Prevent FINDA runout
from triggering.
Change in memory:
Flash: +16 bytes
SRAM: 0 bytes
temp_compensation_start() is only called when
PINDA_THERMISTOR is not defined.
Additionally make sure the retraction or unretraction cannot happen
twice in case MBL fails.
For MK3S users with MMU this extrusion move could
cause a FINDA runout event.
Change in memory:
Flash: -130 bytes
SRAM: 0 bytes
An example is when Unloading filament with MMU.
After the unload completes successfully, some menu items disappeared.
Because mFilamentBack() was not called
Change in memory:
Flash: -56 bytes
SRAM: 0 bytes
Kudos to @3d-gussner for finding the issue
Steps to reproduce:
1. reset printer
2. select Load filament
3. go back to main
4. LCD menu is very limited
5. To get all menus back select 6. Preheat
7. back to main
This commit is my proposed fix.
When eFilamentAction is equal to
FilamentAction::Load we must reset it to FilamentAction::None
when the Back button in Load Filament is selected
Change in memory:
Flash: -26 bytes
SRAM: 0 bytes
- Rename "Idler" to "Sensitivity"
- Implement ReadRegisterInner() as a way to read register in blocking contexts such as manage_response()
This allows us to show the current EEPROM value on the printer's LCD
Add a 'Tune' option to HOMING_IDLER_FAILED error
This will open a menu which allows
the user to change the stallguard threshold
from the MMU error screen
Change in memory:
Flash: +334 bytes
SRAM: +1 byte
Yuri D'Elia
3d-gussner
vintagepc
Guðni Már Gilbert
sarusani
D.R.racer
Alex Voinea
Michael Greene