23f92b24b8
Merge pull request #4735 from gudnimg/cleanup-dead-variable
...
Remove commented variable `load_filament_time`
2024-08-02 16:10:17 +00:00
04a7175cc7
Remove LARGE_FLASH preprocessor symbol
...
It's not very useful as is ... probably remnant from Marlin 1
2024-07-31 12:06:35 +00:00
81f1ec4975
Remove unused messages
2024-07-31 11:57:49 +00:00
0d45228dbd
Remove commented lcd_update_enable(true)
2024-07-31 11:15:39 +00:00
396a8ca4f9
Remove VT100 code
2024-07-31 10:35:18 +00:00
eb7969441a
Remove Servo..h/cpp
2024-07-31 10:31:05 +00:00
2cbbdbacd5
Remove a bit of unused code which is disabled at compile time
...
Some of these have been used > 6 years and don't compile anymore.
Reason to want this removed is just to reduce the code we maintain
2024-07-31 09:53:45 +00:00
d485e4fb0b
Add type to save 50B
...
Saves 50bytes
2024-07-30 15:15:05 +02:00
bb1bb4d717
Remove commented variable load_filament_time
2024-07-28 17:41:23 +00:00
8382815110
Fix inconsistent indendation in mFilamentPrompt()
2024-07-26 11:55:32 +00:00
faa01b5a5f
Fix an issue where mFilamentPrompt menu times out
...
Fixes a regression introduced in 3.13.0 here: a7e9ccfb57 (diff-5fbfdca43c192573e31d8e78d255c510fb6e213b118cf38173277ec2a2163880R7462)
2024-07-26 11:52:20 +00:00
3722a17e5a
Merge pull request #4647 from gudnimg/mmu-sync-april
...
MMU maintenance: Sync with 32-bit FW a little bit
2024-07-24 10:02:24 +02:00
4dc9fd4972
MMU: revert fallthrough in LogicStep
2024-07-23 15:55:47 +00:00
a7004cd067
Fix an issue in manual fan check where prior knob clicks are not consumed
2024-07-15 13:52:30 +00:00
99e306f4a3
MMU: minor formatting sync
2024-07-06 17:24:40 +00:00
d548bb68fd
MMU: revert WaitForHotendTargetTempBeep(); position in code
...
The 8-bit FW uses a different Fullscreen UI which doesn't show the current temperature. So, for now, keep calling WaitForHotendTargetTempBeep before showing the full-screen message.
2024-07-06 16:55:32 +00:00
09f1d85e9c
MMU: Revert changes to execute_extruder_sequence loop
...
The previous for-loop is more memory efficient and saves 20 bytes of Flash
2024-07-06 16:55:32 +00:00
61b4270129
MMU: allow inlining UInt16ToHex
...
Saves 22 bytes of Flash
2024-07-06 16:55:32 +00:00
592fc56bfc
MMU: Sync code with 32-bit
...
The changes in this commit are mainly formatting
But there are some changes like adding a new function planner_draining()
2024-07-06 16:55:32 +00:00
5efae44eb7
Delay Z-Axis on Autoload
...
Delay z-axis movement when the operators hand is close to the printhead.
2024-07-05 16:12:07 +02:00
bc48d34a2f
Replace hradecoded XYZ Z correction value with Z_MAX_POS_XYZ_CALIBRATION_CORRECTION
2024-07-04 10:12:38 +02:00
152b290d1d
Merge pull request #4689 from 3d-gussner/MK3_PFW-964
...
PFW-964: Skip filament unload/load after Shipping factory reset
2024-07-03 13:20:49 +02:00
45a223a1f9
Remove White spaces
2024-05-20 19:09:03 +02:00
e110153ee2
Cleanup doxgen documentation and white spaces
2024-05-20 18:35:09 +02:00
9a56f1e4c1
Skip filament unload/load after Shipping factory reset
...
when MMU is enabled. With MMU enabled no filament should be
loaded while idle.
2024-05-16 12:48:49 +02:00
6f915ee401
MMU: Add workaround for broken Tune button
...
If the MMU is processing a command, the Tune button can't be executed.
Change in memory:
Flash: +16 bytes
SRAM: 0 bytes
2024-05-04 00:22:17 +00:00
08d26fdee2
Replace hard coded crash z lift value with Z lift value.
...
With `M125 Z<value>` you can set the Z lift value via gcode as requested.
Fixes #3419
2024-05-02 11:37:13 +02:00
28502a2b6e
optimisation: remove 1 more call to __divsf3
...
Changing (feedrate * feedmultiply) / 6000.f
to (feedrate * feedmultiply) * (1.f / 6000.f)
Replaces the call to __divsf3 with __mulsf3 which is better
No change in memory
2024-04-23 09:18:45 +02:00
2c46e1b344
optimisation: remove 3 calls to __divsf3
...
Change in memory:
Flash: -34 bytes
SRAM: 0 bytes
2024-04-23 09:18:45 +02:00
d22245b482
Merge pull request #4658 from 3d-gussner/MK3_PFW-762_Ambient_shutdown_80C
...
PFW-762 ambient shutdown at 80 C
2024-04-19 15:06:03 +02:00
e8d55486fe
Merge pull request #4661 from gudnimg/PFW-1557
...
PFW-1557 MMU: Improve unload handling when print is aborted
2024-04-15 15:13:09 +02:00
6e40fe05fc
Merge pull request #4657 from 3d-gussner/MK3_PP_ACCEL_JERK
...
Add max acceleration mm per s2, feedrates and jerk save and restor du…
2024-04-15 15:11:57 +02:00
51b119a3ec
Fix Autoreport broken in 3957dc91aa
2024-04-15 12:09:43 +02:00
1292a82f70
Fix typos
2024-04-15 07:45:36 +02:00
f50e754f26
Use of `eeprom_update_block_notify` and `eeprom_read_block` reduces the flash usage a lot.
...
Thanks to @gudnimg
2024-04-15 07:45:36 +02:00
5c0e014215
Add max acceleration mm per s2, feedrates and jerk save and restor during power panic
...
Thanks to @wavexx in #2456
2024-04-15 07:45:36 +02:00
16dfcfeb9a
MMU: Improve unload handling when print is aborted
...
- Don't allow re-heating the nozzle or the MMU to unload the filament if the print was aborted by a temperature error
- Allow MMU to unload filament if there is no temperature error, and there is no fan error when Fan check is enabled
- When Fan check is disabled, the MMU may unload if there is no temperature error
Change in memory:
Flash: +14 bytes
SRAM: 0 bytes
PFW-1557
2024-04-14 12:07:56 +00:00
52ac95f082
Merge pull request #4600 from sarusani/ChangeRevoNozzleChangeMenu
...
Adjust Nozzle Change Menu For Quick Change Nozzles
2024-04-11 19:19:01 +02:00
361ce65e5c
Merge pull request #4644 from sarusani/AddEjectToFilamentLoadMSG
...
Add Eject Option To Filament Load Message
2024-04-11 19:18:42 +02:00
36282aae1b
Change Ambient board thermistor safety shutdown to 80 C
2024-04-10 17:56:26 +02:00
bc04f16906
Adjust Nozzle Change Menu For Quick Change Nozzles
...
- Show warning if extruder temp is > 40 degrees
- Use fan to speed up cooldown
- Show confirmation msg
- Show nozzle diameter setting after nozzle change
2024-04-09 16:12:46 +02:00
bd935db31e
Add Eject Option To Filament Load Message
2024-04-09 15:50:17 +02:00
e5d504b855
Add Extrude mintemp save and restore during power panic
...
Thanks to @wavexx in #3008
2024-04-09 09:34:24 +02:00
02822c59ad
Merge pull request #4591 from gudnimg/cleanup_cancel_heatup
...
Remove redundant ` cancel_heatup` assignment
2024-04-09 08:17:09 +02:00
fbbcdd0808
Merge pull request #4613 from gudnimg/optimise-axis_ustep_resolution
...
optimisation: initialise `axis_ustep_resolution` in EEPROM
2024-04-08 16:13:52 +02:00
ed9d7f3ac1
ultralcd: merge two functions into one
...
lcd_show_fullscreen_message_yes_no_and_wait_P and lcd_show_multiscreen_message_yes_no_and_wait_P
are the same function. Let's drop one of them so we only have one symbol for the function.
No change in memory
Fix rebase
2024-04-05 19:33:15 +02:00
a4a7b09fe7
Merge pull request #4651 from 3d-gussner/MK3_Fix_Insert_filament_fr_hu
...
Fix issue Insert filament ... message in French and Hungarian
2024-04-04 09:20:48 +02:00
feebac54fc
Fix issue #4424
...
Fix rebase
2024-04-04 09:08:44 +02:00
b3a410abdc
Fix #3361
2024-04-04 09:04:48 +02:00
a93cd93756
Move `MK3 firmware detected on MK3S printer` and `MK3S firmware detected on MK3 printer` to `messages.cpp/.h`
...
Update pot and po files
2024-04-04 08:58:46 +02:00
97584d571e
Update all `_i("` to `messages.cpp/.h`
...
Update `lang/po/*.po*` files
2024-04-04 08:23:40 +02:00
af03662c8f
Merge pull request #4602 from 3d-gussner/MK3_M913
...
Enable M913
2024-04-04 07:30:06 +02:00
8d1be264e5
Thanks to @gudnimg pointing out duplicate if statements that are covered by the top-level if statement.
2024-03-27 17:44:50 +01:00
9e8aadd8af
Revert split if statements
...
Kept few as these get too long
2024-03-27 10:15:07 +01:00
5f26d5f7da
Fix MK2.5 builds
...
- removed `reset_uvlo` as `#ifdef UVLO_SUPPORT` everywhere for MK2.5 is a huge change.
2024-03-27 09:42:59 +01:00
1ac69247d7
Fix and improve PowerPanic
...
- No wait for heatup during host print recovery
- No extra Z lift when power panic happens during paused print
- added an extra EEPROM value
- fixed `EEPROM_LAST_ITEM`
- changed EEPROM version to 3.14.0
- Added `reset_uvlo` function
2024-03-27 09:09:55 +01:00
52275322a2
Remove redundant check
2024-03-20 08:41:29 +01:00
b6e2a8875b
M913 report rescaled currents
2024-03-15 12:47:18 +01:00
2df8a18fde
Fix MK2.5/S builds
2024-03-15 12:47:18 +01:00
82d102d740
Enable M913
2024-03-15 12:47:18 +01:00
9f8115639a
LCD menu
...
- Hide menus during recovering
- Un-/Load filament with FSensor active only show Load OR Unload depending on FS sate
- Host
- Reprint only shown when M79 timer is active
- Resume only shown when M79 timer active
- Stop print always shown when printing, paused and recovering
2024-03-13 17:43:00 +01:00
a04063f966
Fix DEBUG_UVLO_AUTOMATIC_RECOVER
2024-03-13 17:43:00 +01:00
e2823c3c35
Reset EEPROM_UVLO after recovering
...
Undo PP Z lift
2024-03-13 17:43:00 +01:00
9e52b78285
Add ubs_timer.start to PRUSA uvlo
...
Cleanup format
2024-03-13 17:43:00 +01:00
15ea2784c3
Fix another saved_printing_type issue
2024-03-13 17:43:00 +01:00
4e032f6f11
Change to saved_printing_type fixes few issues during power panic recovery
2024-03-13 17:43:00 +01:00
fc157d1f6c
Fix missing eeprom_update_byte for debuging
2024-03-13 17:43:00 +01:00
5b7c583dba
Fix `print_saved_in_ram` to be true for both SD and host prints
2024-03-13 17:43:00 +01:00
9ec5639d29
Rename `sd_print_saved_in_ram` to `print_saved_in_ram` as it saves sd and host prints
2024-03-13 17:43:00 +01:00
112d3c672c
Update debug_printer_states
2024-03-13 17:43:00 +01:00
16aa2e7834
Hide LCD menu "Reprint" during power panic recovery
2024-03-13 17:43:00 +01:00
886d610524
Cancle power recovery correctly using cancel_saved_printing();
2024-03-13 17:43:00 +01:00
95c6ea5889
Fix to correct EEPROM address
2024-03-13 17:42:59 +01:00
47235bbf62
Power panic recover lift by 20 Z_PAUSE_LIFT only once
...
by setting PENDING_RECOVERY_RETRY
Also the default saved_printing_type after a reboot is now PRINT_TYPE_NONE
2024-03-13 17:42:59 +01:00
88b77ecce2
Add bool printer_recovering
2024-03-13 17:42:59 +01:00
517900c3fe
Add DEBUG_PRINTER_STATES
2024-03-13 17:42:59 +01:00
4bca4021c6
Bump up MMU FW version to 3.0.2
...
.
2024-03-04 11:55:54 +01:00
f9bdb8b8aa
Add DEBUG_EEPROM_CHANGES
2024-02-27 08:56:18 +01:00
af64d446bf
Fix MK2.5 build
2024-02-26 10:14:01 +01:00
aededa34bb
Properly check for Z crashes while lowering/raising Z for Z calibration
2024-02-26 10:13:56 +01:00
326019a8bf
Use stallguard during Z calibration after XYZ calibration
2024-02-26 10:13:51 +01:00
692f062fee
Add tmc currents debug
2024-02-26 10:13:45 +01:00
0a727d8573
optimisation: initialise axis_ustep_resolution in EEPROM
...
When the cs variable is loaded into RAM, cs.axis_ustep_resolution will always have some value and none of the 0xff values.
Change in memory:
Flash: -40 bytes
SRAM: 0 bytes
2024-02-24 15:46:32 +00:00
ccb956eae4
Restore custom currents after homing end
2024-02-19 15:33:06 +01:00
e6a4856196
Restore default XY currents after homing
2024-02-19 15:32:22 +01:00
dc3b3387ed
Merge pull request #4593 from 3d-gussner/MK3_Fix_Stop_print_for_host_prints
...
Fix Stop print to send host action when host print is active
2024-02-05 10:39:49 +01:00
727a82bb3d
Fix Stop print to send host action when host print is active
2024-02-05 08:14:10 +01:00
020239687a
Remove redundant cancel_heatup assignment
...
cancel_heatup is set to false inside wait_for_heater()
there is no need to do it before the function call
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2024-02-04 12:15:58 +00:00
794251884a
PFW-1552 Fix a regression introduced in f022567
...
Aborting the print while the nozzle and bed are still heating up
to their target temperatures should disable the heaters immediately.
2024-02-04 12:06:14 +00:00
bacb0b1b07
Fix 3x3 mbl condition
2024-02-02 14:45:30 +01:00
6682237c7a
Merge pull request #4582 from gudnimg/PFW-1552
...
PFW-1552 and PFW-1544: Fix issue with MMU unload when a print is stopped with a cold nozzle
2024-02-01 06:22:49 +01:00
e7ef3d6db5
Fix nitpicking
2024-01-29 13:07:48 +01:00
52ba1b534d
Add HOST power panic auto recovery option
...
Change `PRINT_TYPE_USB` to `PRINT_TYPE_HOST`
Fix more rebase issues
Fix rebase issue again
2024-01-29 13:07:48 +01:00
ffeda98894
Add power panic recovery to active state
...
Fix M79 send only recovery action when power panic recovery is pending
Fix rebase issues
2024-01-29 13:07:48 +01:00
d1b88e1684
Don't show `Print from SD` when host print is paused
2024-01-29 13:07:48 +01:00
c9aba688e3
Saving few bytes by removing spaces in `//action:` host commands. Thanks to @sarusani pointing out inconsistent documentation.
...
Renaming `MSG_OCTOPRINT_*` to `MSG_HOST_ACTION_*` as it is used also with PrusaLink and other host printing solutions
Fix rebase issues
2024-01-29 13:07:48 +01:00
fda30f82c8
Don't show `Set Ready`when not idle
2024-01-29 13:07:48 +01:00
abcb1017f3
PFW-1553 fix regression where SD card file is not closed when stopping paused print
...
When a print is paused, card.sdprinting is set to false. Instead we can check
if the SD card has been mounted and try to close the file.
The closefile() method will check internally whether or not the file is open.
2024-01-27 15:21:08 +00:00
f022567239
PFW-1522 Fix an issue where MMU unloads while nozzle is cold if print is stopped
...
In the case of a Fan Error, the print is paused. If the nozzle is allowed to cool for a while before the print is stopped via the LCD, then the MMU will try to unload with a cold nozzle.
This can happen with ANY recoverable thermal errors.
In this commit I attempt to fix all scenarios. Including PFW-1544 where the nozzle is cooling down when the print has finished normally.
PFW-1544
PFW-1552
Change in memory:
Flash: +74 bytes
SRAM: 0 bytes
2024-01-27 11:54:54 +00:00
c0b76dd5cf
cleanup: move st_synchronize under the if statement
...
If the if statement is not true, then the st_synchronize call is not useful
The raise_z call above the if statement does not need it since it always calls st_synchronize (blocking move)
No change in memory
2024-01-27 10:47:23 +00:00
Guðni Már Gilbert
sarusani
3d-gussner
sarusani
Alex Voinea
D.R.racer