749360db0f
Remove mesh bed leveling include
2023-07-13 09:57:52 +02:00
34ef9665cd
Remove two ultralcd includes
2023-07-13 09:57:52 +02:00
9cc9af14bd
Remove unnecessary la10compat include
2023-07-13 09:57:52 +02:00
b0ff5f45f3
Cleanup language.h includes
...
Remove a few redundant language.h includes
Also remove language.h include from cmdqueue.h to prevent including language.h unnecessarily
Fix missing message.h includes in a few files
2023-07-13 09:57:52 +02:00
ee074eb548
Remove eeprom.h include in SpoolJoin header
2023-07-13 09:57:52 +02:00
37a73e91c6
Remove MMU2 include in stepper.cpp
...
Nothing is used from the MMU class in this file
2023-07-13 09:57:52 +02:00
e91ee4a5db
Change uint8_t* cast to long*
2023-07-13 09:54:33 +02:00
8149853fc9
Optimize `st_set_position()` for speed and size
...
flash: -186
SRAM: 0
time: x0.45
2023-07-13 09:54:33 +02:00
ef4efc22c3
PFW-1528 Intercept register 0x14
...
This commit syncs the 8-bit firmware with the 32-bit
Change in memory:
Flash: +56 bytes
SRAM: 0 bytes
2023-07-13 08:00:11 +02:00
079e4c9112
Merge pull request #4254 from 3d-gussner/MK3_UPDATE_DOXYGEN_PO
...
Update doxygen and po files
2023-06-29 10:38:12 +02:00
9421785190
Update doxygen and po files
2023-06-29 08:23:13 +02:00
3ddd691f44
Update REVO HF 60W to MMU3
2023-06-28 17:15:14 +02:00
b872b59bd9
Merge pull request #4246 from 3d-gussner/MK3_REVO_HF_60W
...
Add REVO High Flow 60W variant
2023-06-28 09:14:45 +02:00
10e2357cc5
Change MMU2 to MMU3
2023-06-27 11:41:09 +02:00
136ef9696d
Do not check MMU version with `M862.3` for MK3|MK3S
2023-06-27 11:41:09 +02:00
5f9cece2da
Update REVO TM warning a error values
2023-06-26 10:32:13 +02:00
b5bd9ebc63
MK3 sync Prusa-Error-Codes ( #4238 )
...
* Sync PEC `FINDA_DIDNT_GO_OFF` to `FINDA_FILAMENT_STUCK`
* Sync PEC `FSENSOR_DIDNT_GO_OFF` to `FSENSOR_FILAMENT_STUCK`
* Sync PEC `PULLEY_STALLED` to `PULLEY_CANNOT_MOVE`
* Sync PEC `SELECTOR_CANNOT_MOVE` update text
* Sync PEC `IDLER_CANNOT_MOVE` update text
* Sync PEC `PULLEY_WARNING_TMC_TOO_HOT` to `WARNING_TMC_PULLEY_TOO_HOT`
* Snyc PEC `RestartMMU` to `ResetMMU`
Also related text
* Sync PEC `SELECTOR_WARNING_TMC_TOO_HOT` to `WARNING_TMC_SELECTOR_TOO_HOT`
* Sync PEC `IDLER_WARNING_TMC_TOO_HOT` to `WARNING_TMC_IDLER_TOO_HOT`
* Sync PEC `PULLEY_TMC_OVERHEAT_ERROR` to `TMC_PULLEY_OVERHEAT_ERROR`
* Sync PEC `SELECTOR_TMC_OVERHEAT_ERROR` to `TMC_SELECTOR_OVERHEAT_ERROR`
* Sync PEC `IDLER_TMC_OVERHEAT_ERROR` to `TMC_IDLER_OVERHEAT_ERROR`
* Sync PEC `PULLEY_TMC_DRIVER_ERROR` to `TMC_PULLEY_DRIVER_ERROR`
Also releated text
* Sync PEC `SELECTOR_TMC_DRIVER_ERROR` to `TMC_SELECTOR_DRIVER_ERROR`
Also related text
* Sync PEC `IDLER_TMC_DRIVER_ERROR` to `TMC_IDLER_DRIVER_ERROR`
Also related text
* Sync PEC `PULLEY_TMC_DRIVER_RESET` to `TMC_PULLEY_DRIVER_RESET`
* Sync PEC `SELECTOR_TMC_DRIVER_RESET` to `TMC_SELECTOR_DRIVER_RESET`
* Sync PEC `IDLER_TMC_DRIVER_RESET` to `TMC_IDLER_DRIVER_RESET`
* Sync PEC `PULLEY_TMC_UNDERVOLTAGE_ERROR` to `TMC_PULLEY_UNDERVOLTAGE_ERROR`
* Sync PEC `SELECTOR_TMC_UNDERVOLTAGE_ERROR` to `TMC_SELECTOR_UNDERVOLTAGE_ERROR`
* Sync PEC `IDLER_TMC_UNDERVOLTAGE_ERROR` to `TMC_IDLER_UNDERVOLTAGE_ERROR`
* Sync PEC `PULLEY_TMC_DRIVER_SHORTED` to `TMC_PULLEY_DRIVER_SHORTED`
Also related text
* Sync PEC `SELECTOR_TMC_DRIVER_SHORTED` to `TMC_SELECTOR_DRIVER_SHORTED`
Also related text
* Sync PEC `IDLER_TMC_DRIVER_SHORTED` to `TMC_IDLER_DRIVER_SHORTED`
Also related text
* Sync PEC `PULLEY_SELFTEST_FAILED` to `MMU_PULLEY_SELFTEST_FAILED`
Also related text
* Sync PEC `SELECTOR_SELFTEST_FAILED` to `MMU_SELECTOR_SELFTEST_FAILED`
Also releated text
* Sync PEC `IDLER_SELFTEST_FAILED` to `MMU_IDLER_SELFTEST_FAILED`
Also related text
* Sync PEC fix MMU_MMU
Update MMU MCU UNDERPOWER
* Sync PEC `FIL_ALREADY_LOADED` to `FILAMENT_ALREADY_LOADED`
Also related text
* Add Prusa Error Codes check script
* Remove `:` at FINDA and FSENSOR as it is in other tiles
* Sync
FSENSOR_DIDNT_TRIGGER
MSG_DESC_SELECTOR_CANNOT_MOVE
MSG_DESC_IDLER_CANNOT_MOVE
MSG_DESC_FW_UPDATE_NEEDED
FILAMENT_ALREADY_LOADED
* Add MMU UNKOWN_ERROR PEC
2023-06-21 07:34:17 +02:00
a2308aea8b
Update E3DREVO High Flow 60W
2023-06-15 15:26:12 +02:00
bf8fd7ed90
Add max_overshoot_pi_autotune value
...
Prepare for REVO 60W
2023-06-07 12:50:56 +02:00
b0a72f42f1
Fix build nr.
2023-05-30 15:54:53 +02:00
3da1ae1344
Change new hotend variants
2023-05-29 10:22:17 +02:00
8078c8eff2
Fix format and bump up build number
2023-05-26 11:06:39 +02:00
cea2a07045
Bump up build number
2023-05-26 08:17:02 +02:00
56dd8f09e7
Fix too long message `MSG_BABYSTEPPING_Z`from c=15 to c=13
...
Had to remove `:` and update NL translation to fit
2023-05-26 08:17:02 +02:00
6ce2026ab7
Rename README in variants folder
2023-05-26 07:36:39 +02:00
02f7c7efc0
Add README_variants
2023-05-26 07:34:06 +02:00
38d801a4c5
Add E3D REVO variant
...
Thanks to E3D and the community providing data
2023-05-25 09:46:16 +02:00
3c678122f6
Merge pull request #4222 from 3d-gussner/PFW1520-pofiles
...
PFW-1520: Add new message `Preload to MMU` to po files
2023-05-24 06:57:48 +02:00
135247c3b7
Merge pull request #4214 from 3d-gussner/MK3_Fix_MMU_IRsensor
...
Fix IRsensor with MMU
2023-05-24 06:57:05 +02:00
9b4c8e9c9d
Thanks to @gudnimg
2023-05-23 10:39:05 +02:00
f43451f80b
Update `MSG_EJECT_FILAMENT` and `MSG_CUT_FILAMENT` to `c=16`
...
Had to shorten SK translation
2023-05-23 09:50:27 +02:00
a37bcbfd8c
Fix `Load filament` to c=16
2023-05-23 09:45:07 +02:00
d4beab95d5
Merge pull request #4208 from gudnimg/load_to_nozzle_fix
...
MMU: Fix 0°C target temperature when loading to nozzle
2023-05-23 08:54:26 +02:00
7dc370a7e1
Move ISR7 code to fancheck.cpp
2023-05-23 07:43:40 +02:00
963bd508a4
Fix MK25 compiler warning
...
warning: 't_fan_rising_edge' defined but not used [-Wunused-variable]
2023-05-23 07:43:40 +02:00
467158eb49
MMU: Fix 0°C target temperature when loading to nozzle
...
bFilamentAction variable is never reset, even after
disabling the heaters.
Steps to reproduce:
1. Boot-up printer
2. Select Load to Nozzle.
3. Select PLA (215°C) target
4. Select Filament 1
5. Wait for load to be successful
6. Go to Preheat submenu and select Cooldown (last menu item)
7. Observe target temperature on the status screen is now 0°C
8. Select Load to Nozzle again.
9. Select Filament 2.
* Expected behavior target temperature IS NOT 0°C
* Actual behavior target temperature IS 0°C
Change in memory:
Flash: -26 bytes
SRAM: 0 bytes
2023-05-22 22:00:00 +00:00
02676fc888
Limit scope of is_mmu_error_monitor_active
...
Move the variable to mmu2_reporting
Change in memory:
Flash: -6 bytes
SRAM: 0 bytes
2023-05-22 08:04:22 +02:00
1f9fc4ef3f
MMU: add UnloadInner and CutFilamentInner
...
Sync with the 32-bit side.
The ReportingRAII does not handle recursion.
Fixes an issue with the multiple calls to
BeginReport() and EndReport()
Change in memory:
Flash: +14 bytes
SRAM: 0 bytes
2023-05-22 08:00:42 +02:00
9d5453a41e
PFW-1520 Rename Load Filament menu to Preload to MMU
...
Change in memory:
Flash: +18 bytes
SRAM: 0 bytes
2023-05-22 07:53:26 +02:00
2391698419
errorCode should reflect the state of the MMU
...
If the protocol reports and error and give errorCode
a value. When the error is resolved, errorCode is not reset to OK.
If the MMU is not in an error state I would expect errorCode to reflect that.
This fixes MMUCurrentErrorCode()
Change in memory:
Flash: +12 bytes
SRAM: 0 bytes
2023-05-22 07:53:12 +02:00
d20dc8256a
Merge pull request #4204 from gudnimg/ReportingRAII-opt
...
optimisation: always inline `ReportingRAII`
2023-05-19 19:44:41 +02:00
91a23e27e1
Fix IRsensor with MMU
...
saves 38bytes
2023-05-19 13:35:28 +02:00
90322a7181
optimisation: always inline ReportingRAII
...
Tested on MK3S+ using the LCD.
Change in memory:
Flash: -80 bytes
SRAM: 0 bytes
2023-05-13 18:07:13 +00:00
0612a38885
Fix stepper inactivity timeout
2023-05-13 08:18:39 +02:00
162f8b4cc8
Merge pull request #4180 from gudnimg/menu_draw_P-fix
...
Fix regression in `menu_draw_P`
2023-05-10 07:30:02 +02:00
0c453b53cd
Merge pull request #4193 from gudnimg/unload-sequence-improvements
...
Fix unload sequence for users without MMU
2023-05-10 07:29:16 +02:00
3c79e77220
Create define for two hardcoded values
2023-05-08 19:50:51 +00:00
e24c2200f1
Set FILAMENTCHANGE_FINALRETRACT instead of hardcoded 0
2023-05-08 19:33:42 +00:00
8d1abf772d
Merge pull request #4192 from gudnimg/PFW-1506
...
PFW-1506 Load to nozzle: Fix too short purge distance
2023-05-08 13:14:47 +02:00
d781dae35b
Combine two moves since they have the same feedrate
...
Change in memory:
Flash: -60 bytes
SRAM: 0 bytes
2023-05-06 15:24:54 +00:00
71180ac284
Cleanup M600 init
...
Instead of removing FILAMENTCHANGE_FINALRETRACT
just set it to 0
No change in memory
2023-05-06 15:24:54 +00:00
8556336185
Fix unload sequence for users without MMU
...
Restores 3.12 sequence which was working well before.
M600 "L" parameter now works like M702 "U" parameter.
Removed a lot of the unused parameters which were copied
from Marlin 2.
Change in memory:
Flash: +96 bytes
2023-05-06 15:24:54 +00:00
e336e2ad08
Fix merge conflict/resync
2023-05-06 11:22:31 -04:00
dd9df36375
Load to nozzle: Fix too short purge distance
...
PFW-1506
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2023-05-06 13:19:57 +00:00
462535ef7f
Restore 3.12 live Z-adjust menu behavior
...
Code size increases a bit but keep in mind the PR
that broke the behavior "saved" 182 bytes:
https://github.com/prusa3d/Prusa-Firmware/pull/4063
So I think this code size increase is OK
Change in memory:
Flash: +84 bytes
SRAM: 0 bytes
2023-05-06 12:08:06 +00:00
1d87789641
Always allow Live Adjust Z in Settings
2023-05-05 19:19:11 +00:00
570b360413
Fix menu_draw_P for negative values
...
The new code did not take into account the minus sign.
The template for menu_draw_P is removed since there is no benefit in
uint8_t version of this function since the value
is converted to two bytes anyway by lcd_printf_P.
Change in memory:
Flash: -92 bytes
SRAM: 0 bytes
2023-05-05 17:24:14 +00:00
bf6c0919e1
Merge pull request #4166 from gudnimg/gudnimg-patch-1
...
M701/M702: Set default Z value to 0
2023-05-05 12:38:37 +02:00
12d9070c03
Merge pull request #4181 from gudnimg/status-screen-feedrate
...
optimisation: only check feedrate if knob is rotated
2023-05-05 12:37:46 +02:00
fd2184801f
Merge pull request #4168 from gudnimg/next_feedrate_remove
...
Cleanup: Remove `next_feedrate` from global scope
2023-05-05 12:36:04 +02:00
427e88a406
Merge pull request #4175 from gudnimg/remove-LoadFilament
...
cleanup: Remove unused `LcdCommands` state `LoadFilament`
2023-05-05 12:34:49 +02:00
bdd958fe5e
Merge pull request #4157 from leptun/menu_optimizations
...
Menu optimizations
2023-05-05 11:51:12 +02:00
649f08f69f
Merge pull request #4178 from gudnimg/m600-dead-code
...
M600: remove dead code
2023-05-05 11:50:01 +02:00
e3a57c9947
Merge pull request #4169 from 3d-gussner/MK3_TMcal_mid
...
Move nozzle to center during Thermal model cal.
2023-05-05 11:48:41 +02:00
fc15f5a6ef
Select correct MMU slot in lcd_wizard_load
...
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2023-05-02 22:38:54 +00:00
9cf1f7871e
Minor fix to M701 when MMU slot is out of range
...
If MMU slot is outside of range, then we rather the printer
not do anything. Currently it would accidentally assume
the MMU is disabled. This may have undesireable results.
No change in memory
2023-05-02 22:32:18 +00:00
5b75886a55
Fix regression where feedrate can overflow on status screen
...
If the remaining print time is more than 10.9 hours at 100%
then increasing the feedrate multiplier
to 101% or more will yield an unrealistic time due to overflow occuring.
Change in memory:
Flash +2 bytes
SRAM: 0 bytes
2023-05-01 12:48:21 +00:00
b3f52f95c7
optimisation: only check feedrate if knob is rotated
...
Guard the feedmultiply code with
lcd_encoder.
if lcd_encoder = 0, then there is no need to check if
feedmultiply should be updated.
Also set lcd_encoder to zero in one line to consume the rotation event.
Change in memory:
Flash: -40 bytes
SRAM: 0 bytes
2023-04-30 23:31:16 +00:00
92e5747469
M600: remove dead code
...
The if statement doesn't do anything useful
so I propose it be removed before 3.13 release
Change in memory:
Flash: -30 bytes
SRAM: 0 bytes
2023-04-29 23:43:27 +00:00
26369ac540
Restore old M701/M702 behavior
...
If the new Z parameter is not given,
assume that the old Z-lift behavior is desired.
Change in memory:
Flash: -28 bytes
SRAM: 0 bytes
2023-04-29 16:22:28 +00:00
0b34c6a695
cleanup: Remove unused LcdCommands state
...
This may help the compiler generate smaller code
Change in memory:
Flash: -2 bytes
SRAM: 0 bytes
2023-04-29 10:24:04 +00:00
d7127c44f1
Merge branch 'prusa3d:MK3' into gudnimg-patch-1
2023-04-28 19:10:56 +00:00
e11555392e
Save some bytes.
...
Thanks to @leptun
2023-04-26 09:18:47 +02:00
686f92b243
Move nozzle to center during Thermal model cal.
2023-04-25 20:41:17 +02:00
228250f050
Cleanup: Remove next_feedrate from global scope
...
No change in memory
2023-04-24 21:33:07 +00:00
a354aad762
Merge pull request #4167 from leptun/lcd_encoder_improvements
...
Lcd encoder improvements
2023-04-24 15:58:54 +02:00
e662ef276e
Deduplicate temperature settings
...
Flash: -52B
SRAM: 0B
2023-04-24 11:56:53 +02:00
c83646743f
Deduplicate MMU settings
...
Flash: -58B
SRAM: 0B
2023-04-24 11:56:53 +02:00
4a2a89cb74
Remove stupid comments from older bad code
2023-04-24 11:56:53 +02:00
67f0fe0fce
Remove AUTOTEMP menu items
...
They are commented out and broken anyway
2023-04-24 11:56:53 +02:00
c339711025
Make the encrot table balanced
...
It won't change much. It is not possible to determine in which direction the encoder spun when two steps are made, so just use + or - 2.
2023-04-24 11:56:25 +02:00
32e68c33b4
lcd encoder: use lookup table
...
Also handle the scenario where the encoder moves two steps in a single lcd_buttons_update cycle.
Flash: -46B
SRAM: 0B
2023-04-24 11:56:13 +02:00
ea101f49d4
`lcd_buttons` is actually `lcd_click_trigger`
...
Flash: -4B
SRAM: 0B
2023-04-24 11:56:04 +02:00
dd16cf4525
Remove Binary.h include
2023-04-24 11:52:25 +02:00
78614f5670
M701/M702: Set default Z value to 0
...
Set default Z value to 0 to maintain backwards compatibility with older gcodes.
2023-04-24 09:09:43 +00:00
17e085040c
Add missing line to custom character
...
Shouldn't make a difference since the array is already defined as 8B long, but I just found it weird and surprising when I noticed only 7 lines were defined
2023-04-24 10:44:48 +02:00
548ed0eb31
Convert <binary.h> to native binary literals
2023-04-24 10:42:09 +02:00
5b7266fdf1
Don't render message when printer is idle
...
Guard the lcd_display_message_fullscreen_P call by blocks_queued(). If there are no planned moves, there is no need to render this message, it creates a weird LCD draw noticable by the user.
Change in memory:
Flash: +10 bytes
SRAM: 0 bytes
2023-04-23 12:25:10 +02:00
9de2cbfe8e
Fix an issue with crash_mode_switch toggling
...
Proposed changes
2023-04-23 12:25:10 +02:00
9272545deb
Dead code cleanup
2023-04-23 12:25:10 +02:00
02a0f6a35a
Correctly utilize the menu stack in the Mode select message
...
Flash: -34B
SRAM: 0B
2023-04-23 12:25:10 +02:00
6390b3b69b
Remove duplicate separator string
...
Flash: -14B
SRAM: 0B
2023-04-23 12:25:10 +02:00
62991c8e67
Fix issue where Tx gcode doesnt reset custom_message_type
...
We need to call BeginReport and EndReport
otherwise the SD filename is not shown when printing
This only affects single material MMU gcodes
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2023-04-23 09:52:11 +00:00
5778e39687
Resync `lcd_encoder_diff` when clicking
...
Flash: +4B
SRAM: 0B
2023-04-23 10:07:52 +02:00
c037e6dfba
Use atomic block for accessing lcd_encoder_diff
...
There was still the possibility of lcd_encoder_diff being updated from the ISR while the new enc_diff was being computed.
Flash: +8B
SRAM: 0B
2023-04-23 09:58:56 +02:00
1f181a949a
Fix `lcd_encoder_diff` getting out of sync with the knob hard steps
...
Flash: +18B
SRAM: 0B
2023-04-23 09:48:09 +02:00
ee8b95b556
Merge pull request #4158 from gudnimg/remove-dead-code-gudni-e1e2
...
Cleanup: remove unused extruder macros
2023-04-23 09:26:26 +02:00
9662bb11d4
Merge pull request #4144 from gudnimg/double-feedback-bugs
...
Double feedback bugs
2023-04-23 09:14:01 +02:00
3509791943
Drop sound feedback in lcd_v2_calibration
...
Drop the sound feedback in lcd_v2_calibration
when switching to lcd_generic_preheat_menu
If a single filament setup (no MMU) has filament loaded, it will jump
immediately to lcd_generic_preheat_menu
this created double feedback.
Let's just drop the feedback since the transition
between menus is very fast.
Change in memory:
Flash: -8 bytes
2023-04-22 15:28:27 +00:00
b15beb25cc
Remove INVERT_E1_DIR and INVERT_E2_DIR from config
...
I think these should be removed from the configuration files
as these definitions don't do anything.
2023-04-22 15:15:21 +00:00
0cf0d40a2e
Remove checkAllHotends()
2023-04-22 15:15:21 +00:00
c7f0ee13be
Missed these macros disable_e1/2
2023-04-22 15:15:21 +00:00
25522d3d68
Remove unused Autofan extruder configs
2023-04-22 15:15:21 +00:00
c14332bfb2
Combine two ifdefs
2023-04-22 15:15:21 +00:00
327b5b230b
Remove soft_pwm_1 and soft_pwm_2
2023-04-22 15:15:21 +00:00
fcabcd2804
Remove TEMP_SENSOR_1 and TEMP_SENSOR_2
...
Hopefully I didn't miss anything
2023-04-22 15:15:21 +00:00
f539b40611
Remove more EXTRUDERS > 1 code
2023-04-22 15:15:21 +00:00
4935191335
Cleanup remove unused macros
...
enable_e1
enable_e2
disable_e1
disable_e2
The firmware doesn't support multiple extruders
No change in memory
2023-04-22 15:15:21 +00:00
7889d54cfd
Merge pull request #4160 from gudnimg/cleanup-tcode-description
...
Rewrite the Tcodes description
2023-04-22 14:43:33 +00:00
76a76de7ea
Rewrite the Tcodes description
...
The old description had typos and was a bit confusing for new users
The new text is a suggestion from David Buzek at Prusa Research
2023-04-22 14:27:01 +00:00
51da6065c8
Merge pull request #4159 from gudnimg/cleanup-gudni-comments
...
Remove random `//-//` comments
2023-04-22 13:53:13 +00:00
b8f8348e77
Fix double feedback in Z-offset menu
2023-04-22 15:53:06 +02:00
b6e228d5a5
Fix double feedback in First Layer Calibration
...
For MMU users: This happens when the user
selects a filament to load from 1 to 5
For non-MMU: this happens when clicking
the knob within 2 seconds.
Additionally fixed the code indendation
it was a mix of spaces and tabs
2023-04-22 15:53:06 +02:00
ccabf1fa31
Remove random //-// comments
2023-04-22 13:39:08 +00:00
e516d8a0c4
Merge pull request #4156 from leptun/lcd_status_screen_block
...
Fix `M0` click not consumed
2023-04-22 15:01:16 +02:00
4ce3fa53a1
Optimise M0/M1 code size
...
Replace two bool variables with one.
It's not obvious but (!hasP && !hasS) is equal to
!(hasP || hasS)
Note: expiration_time_set = hasP || hasS
Truth table:
|--------------------------------------------------|
| hasP| hasS| (!hasP && !hasS)| !(hasP || hasS) |
|------|-----|--------------------|-----------------|
| 0 | 0 | 1 | 1 |
| 0 | 1 | 0 | 0 |
| 1 | 0 | 0 | 0 |
| 1 | 1 | 0 | 0 |
|--------------------------------------------------|
Change in memory:
Flash: -36 bytes
SRAM: 0 bytes
2023-04-21 17:42:55 +00:00
360f234b98
Merge pull request #4146 from gudnimg/fan-check-opt
...
Reduce code size in fan check selftest
2023-04-21 14:24:04 +02:00
91b913e997
Fix `M0` click not consumed
...
Fix the need to click the knob twice to dismiss `M0`.
Flash: -54B
SRAM: -2B
2023-04-21 12:59:40 +02:00
2ad916a2c3
Fix manual fan check menu
...
lcd_encoder was not being updated
we need to call manage_inactivity
Tested on MK3S+
Change in memory:
Flash: +6 bytes
SRAM: 0 bytes
2023-04-19 15:41:36 +00:00
18c389543b
Fix lcd_update() FW crashes
...
Change in memory:
Flash: +10 bytes
SRAM: 0 bytes
2023-04-19 15:41:36 +00:00
20e73e3c4f
Merge pull request #4067 from scottmudge/MK3_3.12-meatpack-pr
...
Add support for g-code compression/packing over serial connection (MeatPack)
2023-04-19 09:20:07 +02:00
2dcaae80d5
Merge pull request #4027 from gudnimg/minor-optimisation-gudni
...
Many minor optimisations for 3.13/3.14
2023-04-17 21:27:48 +02:00
ea97ca7920
Use `EXTRUDERS` instead of hardcoded value in string
2023-04-17 21:12:59 +02:00
b67063f14a
Remove empty lines
2023-04-17 21:10:20 +02:00
43d41ddd2b
cleanup: static variables in Marlin_main.cpp
2023-04-16 23:23:31 +00:00
4b54cd1f30
Remove unused LoadingToNozzleRAII
...
The variable is not used anywhere.
Change in memory:
Flash: -14 bytes
SRAM: -1 byte
2023-04-16 17:23:28 +00:00
01df65882f
cleanup: remove commented code
2023-04-16 15:25:43 +00:00
f6135f2ed1
Enable Analog IR sensor again
2023-04-16 13:58:18 +00:00
f5b9d2ac2e
cleanup: Remove unused Developer define
2023-04-16 13:13:16 +00:00
2ed4a75894
cleanup: remove unused settings
2023-04-16 13:13:16 +00:00
559e1bb21a
Remove unused MMU configs
...
- MMU_IDLER_SENSOR_ATTEMPTS_NR
- MMU_REQUIRED_FW_BUILDNR
These are no longer used
2023-04-16 13:13:16 +00:00
9b6e1babcb
many more lcd_putc_at optimisations
...
Changes in
lcd_implementation_drawmenu_sdfile
and
lcd_implementation_drawmenu_sddirectory
seem to save the most.
Change in memory:
Flash: -72 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
dea7f2b26c
Resolve PR review
...
Initialise EEPROM_CHECK_MODE always
But if farm mode is detected, update the Check mode to Strict
Initialise EEPROM_NOZZLE_DIAMETER on farm mode.
When opening the menus this value is set automatically to
_Diameter_400 anyway so this should be fine.
No change in memory on Multilang build
2023-04-15 13:45:10 +00:00
9f66eceb29
optimisation: belt test new values
...
use lcd_print instead of lcd_printf_P
to print the number only
Tested on MK3S+
Change in memory:
Flash: -34 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
87e40f1cee
optimisation: lcd_putc_at in belt test
...
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
583c46a63f
Simplify two fan_check_error checks
...
There are only 3 possible values. No need to check for two of them
to rule of the last value. Instead simply check for the last value only.
Change in memory:
Flash: -16 bytes
SRAM: 0 bytes
2023-04-15 13:45:10 +00:00
b67c359129
Move fan_state to fancheck.cpp and make it static
...
No change in memory
2023-04-15 13:45:10 +00:00
ebdcfbec50
cleanup: tmc2130: make variables static where applicable
...
No change in memory
2023-04-15 13:45:10 +00:00
7c23d8b00c
cleanup: make cancel_heatup static in Marlin_main
2023-04-15 13:45:10 +00:00
d148c08991
Remove dead code from get_coordinates()
2023-04-15 13:45:10 +00:00
c7de1b1416
optimize get_coordinates() axis mask
2023-04-15 13:45:10 +00:00
ea7b395852
Remove useless parantheses
...
Found these a few months ago when I was trying some other optimization. Don't want to make a PR just for this, so I'll just slide it here in this existing PR.
2023-04-15 13:45:09 +00:00
d175dba669
optimisation: use expired_cont is specific places
...
!variable.running() || variable.expired()
is equal to
variable.expired_cont()
The latter required less flash memory
Change in memory:
Flash: -28 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
00ffab8f62
optimisation: combine if statements in Sensors menu
...
FINDA status is always 0 or 1
Change in memory:
Flash: -28 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
7ff514621c
cleanup: remove unused global variable
2023-04-15 13:45:09 +00:00
69b4696114
use lcd_puts_P instead of lcd_printf_P
...
Change in memory:
Flash: -8 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
66bb9bcfe4
optimisation: lcd_temp_cal_show_result
...
result is boolean so always update the EEPROM
Change in memory:
Flash: -20 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
bd796a2cb3
optimisation: more lcd_putc_at
...
Change in memory:
Flash: -18 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
70dadc4202
M115: Extruder count is always 1
...
Change in memory:
Flash: -8 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
62cbc829f6
optimisation: use new eeprom methods in check_printer_version()
...
Change in memory:
Flash: -48 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
cd8a22d6b3
optimisation: utils: don't initialise global variables
...
They will be set by fCheckModeInit() by reading from EEPROM
Change in memory:
Flash: -2 bytes
SRAM: -1 byte
2023-04-15 13:45:09 +00:00
7a8dfdae53
optimisation: use new EEPROM init method for fCheckModeInit
...
Change in memory:
Flash: -90 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
6aafbe69a8
cleanup: remove unused function declaration
2023-04-15 13:45:09 +00:00
6e02a082e2
cleanup: make heating_status_counter static
...
Change in memory:
Flash: 0 bytes
SRAM: 0 bytes
2023-04-15 13:45:09 +00:00
ab934f8ba5
optimisation: make clock_interval static and 1 byte
...
Change in memory:
Flash: -16 bytes
SRAM: -1 byte
2023-04-15 13:45:09 +00:00
66e629ba74
cleanup: remove unused variable FSensorStateMenu
2023-04-15 13:45:09 +00:00
3cd97a5e8f
optimsation: draw cursor and set position with one function
...
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2023-04-15 13:45:08 +00:00
2120d17912
optimisation: simplify T-code response for single material
...
Extruder is always 0
Change in memory:
Flash: -12 bytes
SRAM: 0 bytes
2023-04-15 13:45:08 +00:00
420f745bed
optimisation: mmu: combine if statements
...
Change in memory:
Flash: -6 bytes
SRAM: 0 bytes
2023-04-15 13:45:08 +00:00
4d90ecbcc4
cleanup: remove ctype include
...
We don't use any function from this header
No change in code size
2023-04-15 13:45:08 +00:00
3dda8b5c00
optimise fan check selftest code
...
Tested on MK3S+
Change in memory:
Flash: -174 bytes
SRAM: 0 bytes
2023-04-15 11:11:16 +00:00
d6c81dab62
Fix manual fan check menu
...
lcd_encoder was not being updated
we need to call manage_inactivity
Tested on MK3S+
Change in memory:
Flash: +6 bytes
SRAM: 0 bytes
2023-04-15 10:59:58 +00:00
95acdba5fa
Fix lcd_update() FW crashes
...
Change in memory:
Flash: +10 bytes
SRAM: 0 bytes
2023-04-14 21:31:12 +00:00
f34c1ffeac
Fix an issue where visualisation is overwritten by SD file name
...
We should let EndReport set the custom message type state to Status
This will ensure the SD file name is shown correctly AFTER we've shown
the visualisation
Currently the visualisation is cut off in the middle by ReportProgressHook
Change in memory:
Flash: -6 bytes
SRAM: 0 bytes
2023-04-14 09:32:41 +02:00
4b3dc65598
Don't always set MSG_WELCOME at end of toolchange
...
This should only be set when NOT printing
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2023-04-14 09:32:41 +02:00
41b8279805
Fix eeprom table addresses
2023-04-13 11:34:18 +02:00
af4a3f3328
Reorder eeprom reads
...
Saves 4B of flash
2023-04-13 11:15:17 +02:00
f333d36e47
Use a different location as a kill message pending flag
...
The old implementation would fail if the message was in progmem at address 0xffff or 0x0000 (both unlikely). It would also fail if the eeprom was initialized to some other random value, which could have been dangerous when displayed as a full screen message.
2023-04-13 10:57:00 +02:00
4b65d49512
Move kill check earlier during startup
2023-04-13 10:57:00 +02:00
2aca89d6dc
Update eeprom documentation
2023-04-13 10:57:00 +02:00
f388d8abb6
postponed kill() message with softReset
2023-04-13 10:57:00 +02:00
82343184e7
Merge pull request #4036 from gudnimg/optimise-mmu-silent-mode
...
optimisation: MMU silent mode toggling & init
2023-04-13 10:54:21 +02:00
193bce7f20
Merge pull request #4037 from gudnimg/optimisation-tmc2130-stuff
...
Optimisation: Disable M351 when using TMC2130 and code related to it
2023-04-13 10:54:08 +02:00
3cd125c566
MeatPack gcode compression support
2023-04-13 10:50:15 +02:00
3b9d1b8980
Merge pull request #4138 from gudnimg/menu-fixes-gudni
...
Fix broken editing menu
2023-04-13 10:16:19 +02:00
e4bedf0523
Merge pull request #4133 from gudnimg/xyzcal-opt
...
Reduce XYZ cal code size
2023-04-12 21:35:58 +02:00
6c6f98fb03
Merge pull request #4134 from gudnimg/tmc2130_home_exit-opt
...
tmc2130: simplify parsing axis mask
2023-04-12 21:35:46 +02:00
c16e7733e9
Merge pull request #4141 from gudnimg/double-feedback-xyz-cal-menu
...
menu: Fix an issue with feedback double triggering in XYZ cal menu on knob click
2023-04-12 21:29:24 +02:00
225999b79d
Remove redundant colon characters
...
The Edit menu already applies a colon to the label string
no need to render it twice.
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2023-04-12 17:37:57 +00:00
b91941f354
Fix broken editing menu
...
- currentValue must be initialised when entering the menu
- Consume lcd_encoder value when editing an item
Change in memory:
Flash: +40 bytes
SRAM: 0 bytes
2023-04-12 17:37:56 +00:00
53e3193252
Fix bug with uint8_t not shown correctly on LCD
...
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2023-04-12 17:37:23 +00:00
2fc810289a
Fix an issue with feedback double triggering in XYZ cal menu
...
The feedback is produced due to the user clicking the knob
the menu_goto call should therefore not trigger additional feedback when
switching between menus.
No change in memory
2023-04-12 16:46:33 +00:00
d688f6ec6f
Menu item code: optimize return
2023-04-10 15:29:58 +02:00
b735c3d040
optimisation: extract common code into SETTINGS_FANS_CHECK
...
Implement it as a function instead of preprocessor macro
this allows us to control inlining
Change in memory:
Flash: -34 bytes
SRAM: 0 bytes
2023-04-10 13:24:39 +02:00
9a1eb7b239
Prevent rendering of the remaining menu items if the menu is clicked
...
Also prevent clicking
2023-04-10 13:02:22 +02:00
d3d201730e
Do not return early if the menu item is clicked
...
Just let the menu draw till the end even if an item is clicked. The worst this can do is waste some clock cycles
flash: -1222B
ram: 0B
2023-04-10 13:02:22 +02:00
bfdef3af9f
Fix menu items optimizations when extracting to functions.
...
Properly increment menu_item when the menu item is clicked so that you don't get multiple menu items clicked if in view (when the menu code is deduplicated to functions)
2023-04-10 13:02:22 +02:00
339c080b19
tmc2130: optimize mask when iterating over axes
...
Change in memory:
Flash: -28 bytes
SRAM: 0 bytes
2023-04-09 17:49:28 +02:00
c4b4cbfc7b
Make the function static
2023-04-09 13:40:10 +00:00
afd4f1d5bc
Iterate over axis bits
2023-04-09 15:17:01 +02:00
4e31bb94ef
tmc2130: simplify parsing axis mask
...
There is no need to check if every axis bit with each for-loop
iteration. We just need to check if a given axit bit is set.
Change in memory:
Flash: -6 bytes
SRAM: 0 bytes
2023-04-09 13:12:22 +00:00
e70344dc94
Reduce XYZ cal code size
...
Change in memory:
Flash: -120 bytes
SRAM: 0 bytes
2023-04-09 12:23:42 +00:00
902780a929
Disable M351 when using TMC2130 and code related to it
...
Change in memory (MK3S+ multilang build)
Flash: -250 bytes
SRAM: 0 bytes
2023-04-07 21:07:26 +02:00
449e83c7ff
Fix filament autoloading
2023-04-07 10:36:44 +02:00
2a3e4cac75
Fix toggle menu items rendering
2023-04-07 09:35:31 +02:00
49096f14c3
SD menu do not consume click in _scrolling state
2023-04-07 09:11:49 +02:00
10ba758bf7
Fix menu encoder rotation
2023-04-06 21:35:30 +02:00
373fab883d
Fix fsensor runout conditions
...
And also reorder autoload and runout conditions
2023-04-06 10:37:29 +02:00
dfe6ea6470
Fixup after rebase
2023-04-06 07:44:16 +02:00
c16db4e607
Remove lcd_encoder clamp check
...
as proposed by @leptun
2023-04-06 07:44:16 +02:00
Guðni Már Gilbert
Alex Voinea
3d-gussner
VintagePC
Scott Mudge
D.R.racer