5f9d6a0401
Update "Fail stats" c=18
2021-03-19 16:08:57 +01:00
878200ecae
Update "Fail stats MMU" c=18
2021-03-19 16:06:54 +01:00
5cbb5b0e17
Update "Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled." c= r= values
2021-03-19 15:53:36 +01:00
c39b22724d
Update "G-code sliced for a different level. Please re-slice the model again. Print cancelled." c= r= values
2021-03-19 15:51:10 +01:00
5a36b49cee
Update "Select temperature which matches your material." c= r= values
2021-03-19 15:45:32 +01:00
41db8eed30
Update "Select nozzle preheat temperature which matches your material." c= r= values
2021-03-19 15:42:17 +01:00
f319dede23
Update "Please insert filament into the first tube of the MMU, then press the knob to load it." c= r= values
2021-03-19 15:39:57 +01:00
286c1931a5
Update #MSG_WIZARD_LOAD_FILAMENT c=20 r=5
2021-03-19 15:33:13 +01:00
6a267e5a9a
Update "Press the knob to resume nozzle temperature." c= r= values
2021-03-19 15:30:13 +01:00
b001eaec8d
Update "If you have additional steel sheets, calibrate their presets in Settings - HW Setup - Steel sheets." c= r= values
2021-03-19 15:24:28 +01:00
18a58c504d
Update #MSG_BED_HEATING_SAFETY_DISABLED c=20 r=3
2021-03-19 15:21:42 +01:00
ee8c9227cf
Update #MSG_SELFTEST_FANS c=20
2021-03-19 15:16:23 +01:00
ba73d14511
Update "Fix the issue and then press button on MMU unit." c= r= values
2021-03-19 15:13:56 +01:00
0c18ddcb10
Update "Choose a filament for the First Layer Calibration and select it in the on-screen menu." c= r= values
2021-03-19 15:10:18 +01:00
89900a5109
Update "G-code sliced for a newer firmware. Please update the firmware. Print cancelled." c= r= values
2021-03-19 15:07:14 +01:00
49e8f84916
Update "G-code sliced for a newer firmware. Continue?" c= r= values
2021-03-19 15:02:53 +01:00
fd7aa82dce
Update MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
2021-03-19 15:00:00 +01:00
1ed7d8fc4b
Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=5
2021-03-19 14:42:17 +01:00
dbec06086c
Update MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=5
2021-03-19 14:40:04 +01:00
37ec18596b
Update #MSG_USERWAIT c= value
2021-03-19 14:29:15 +01:00
dd4c02aa15
Update "Heating disabled by safety timer." c= r= values
2021-03-19 14:23:46 +01:00
9a719fd0b9
Update "Calibrating home" c= value
2021-03-19 14:17:30 +01:00
8ac1d5b95e
Attempt to workaround the M73 C0|D0 visual issue ( #3067 )
...
Attempt to workaround the M73 C0|D0 visual issue
This is an attempt to enable alternation of time to print finish and time
to color change even in the last minute of time to color change, i.e. be
able to print "0:00C".
The proposed solution leverages the capability of the current FW to read
float values from the C|D parameter. This could have the raw benefit of
being able still to alternate this time on the LCD as "0:00C" (or
"<1min") if the slicer sends a non-zero but <1 time right before the
color change.
Co-authored-by: D.R.racer <drracer@drracer.eu>
Co-authored-by: 3d-gussner <3d.gussner@gmail.com>
2021-03-19 10:18:28 +01:00
f31189e5be
Version changed (3.10.0-RC1 build 4078)
2021-03-17 12:30:54 +01:00
99206884b5
Calibration: detect biased PINDA and retry calibration
...
PFW-1223
2021-03-12 05:04:49 +01:00
6355458052
Add def `M120_M121_ENABLED` to `Configuration_adv.h`
2021-03-11 15:00:49 +01:00
832e881955
Disable M120 M121
2021-03-10 17:46:19 +01:00
eb4cf1a77f
Calibration: return XY back after Z search
...
PFW-1217
2021-03-10 10:27:57 +01:00
9b21ebd376
Fix numbering for custum sheet hex values
2021-03-07 12:14:03 -05:00
09b3632d43
Final changes + cleanup
2021-03-07 09:44:33 -05:00
144fc197a5
Fix index number
2021-03-06 14:20:06 -05:00
c777199d34
Simplify sheet numbering
2021-03-06 13:26:28 -05:00
6489c6f17f
Merge pull request #3036 from wavexx/remove_is_buffer_empty
...
Remove duplicate function is_buffer_empty()
2021-03-05 08:28:40 +01:00
53a3772f09
Add satin sheet
2021-03-04 10:14:29 -05:00
f0eedf301d
optiboot: check boot_app_magic as well before early exit
2021-03-03 16:31:55 +02:00
c951bea627
Remove unused/broken bootapp code
2021-03-03 16:31:30 +02:00
c95d2fcbd7
Use avr-libc wdt library
2021-03-03 16:31:06 +02:00
073cbe0339
Merge pull request #3048 from DRracer/bootappflags-bad-addr
...
Fix flashing languages with inline wdr instructions
2021-03-03 13:46:08 +01:00
8ced0579d6
Move SerialHead declaration outside of loops
2021-03-03 14:35:37 +02:00
c1849f5cc2
Merge pull request #2405 from leptun/MK3_NEW_SD_COMPILATION
...
⚡ ️New SD menu
2021-03-03 11:45:04 +01:00
026145b78b
Fix CFM message end pointer
2021-03-03 12:31:14 +02:00
3922bf2877
Fix flashing languages with inline wdr instructions
...
A fairly mysterious situation happened recently in the MK3 branch.
After merging #3033 (change watchdogReset() into a single inline wdr instruction)
we were unable to flash languages.
Since it looked similarly suspicious like issue #2954 we started investigating deeply.
The problem was in the code as described in the comment in this PR.
2021-03-03 11:19:39 +01:00
7fa93dfa1b
Fix back from submenu `Community made` to `Select language` after factory reset
2021-03-01 09:18:47 +01:00
fbcbba78a3
Merge remote-tracking branch 'upstream/MK3' into MK3_Dutch
2021-03-01 09:04:10 +01:00
e9c3becb2c
Merge pull request #2572 from wavexx/fwretract_plan_sync
...
Always sync before manipulating the planner position in FWRETRACT
2021-03-01 08:26:57 +01:00
6d7d9089f7
Add defines and templates for community languages
...
Add `Community made` submenu to `Select language`
2021-03-01 08:22:43 +01:00
d0d4298249
Update EEPROM documentation for Service prep
2021-02-28 18:18:06 +01:00
3e06a17810
Fix LCD output
2021-02-28 18:04:07 +01:00
28f21c8630
Fix bubblesort sorting speed. ShellSort is probably broken
2021-02-26 19:17:14 +02:00
6e0ecf5cd2
Remove redundant click sound in factory reset (MK3 merge issue)
2021-02-26 18:22:32 +02:00
f3c422c40e
Merge pull request #3039 from 3d-gussner/PFW-910
...
Fix issue #3037
2021-02-26 12:07:10 +01:00
194438c130
Fix formatting
2021-02-26 09:54:57 +02:00
7faffa539a
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION
2021-02-26 09:48:46 +02:00
f346125948
Use BubbleSort by default. Disable ShellSort until I fix it
2021-02-26 09:18:59 +02:00
225c456ae6
Limit progressbar to LCD_WIDTH
...
for some stupid reason bubbleSort sometimes exceeds the total value :)
2021-02-26 09:18:28 +02:00
c63f92ae52
Invert shellSort logic
2021-02-26 08:57:49 +02:00
204da1cc3f
Factory reset and check_file progress bar
2021-02-25 21:04:05 +02:00
8821439878
Cardreader progressbar code
2021-02-25 20:25:32 +02:00
afa7c7ab03
Remove forgotten (?) undef at the end of menu.cpp
2021-02-25 19:29:14 +02:00
54b2edbc8c
Update debugging code
2021-02-25 19:26:01 +02:00
e8f6c9fac9
Exit the _lcd_move* menus when homing/leveling
...
Instead of resetting the encoder status when homing or leveling, simply
exit the move/liveZ menu.
When transitioning from idle->printing, axis move shouldn't be allowed
as it would insert moves during a print. This is always wrong.
The menu must be always dismissed. Instead of checking all places where
the menu could be active, automatically dimiss the menu from within
_lcd_move when homing/MBL is happening. The long-push function and the
settings menu checks if "axis move" is possible, and thus
prevent the user to re-enter the menu already.
When doing the first layer calibration, the _lcd_babystep_z is
automatically brought back after MBL has completed.
Technically we should do the same when entering/exiting the paused state
in _lcd_move. However, it's better to dismiss _any_ menu in
stop_and_save_print_to_ram/restore_print_from_ram_and_continue instead.
To be done later...
2021-02-25 17:33:59 +01:00
b4f5633bde
Enable "Move axis" and "Disable steppers" only when idle
...
Move axis queues movements, which disrupts a normal print, homing (when
XY is combined) or MBL.
Likewise, "Disable steppers" only makes sense when the printer is fully
idle.
Only allow such actions when the printer is not active and/or in the
paused state.
2021-02-25 17:33:59 +01:00
14a1a93bc8
Include probing/MBL in the PRINTER_ACTIVE check
...
This prevents to perform disruptive actions during homing or between MBL
probes, which would result in a failure.
2021-02-25 17:33:59 +01:00
28e9c814fc
Remove code duplication for babystep insertion
2021-02-25 16:44:16 +01:00
019c818c05
Insert babysteps using CRITICAL_SECTION instead of cli/sei
2021-02-25 16:44:16 +01:00
f5e419530b
Inhibit LiveZ from the settings menu during mesh bed leveling
2021-02-25 16:44:16 +01:00
ff4e53d2d1
Prevent babysteps in more unsafe situations through homing_flag
...
Further restrict babystep insertion when the lcd_update is enabled by
toggling homing_flag when probing Z (where Z shouldn't be touched
anyway as it would disrupt the measurement)
Also reset the encoder value during mesh leveling.
2021-02-25 16:44:16 +01:00
c241adec5f
Ensure babystep_apply|undo always uses the planner
...
The code around these calls _requires_ that the steps are immediately
processed and/or added to the subsequent planner moves.
The only part that doesn't care about immediate insertion is the
direct user-insertion though the lcd encoder.
2021-02-25 16:44:16 +01:00
ffae16bf95
Merge pull request #3033 from DRracer/wdr-inline
...
Make watchdogReset() force_inline
2021-02-25 13:53:34 +01:00
d9b820690e
Merge remote-tracking branch 'upstream/MK3' into MK3_Dutch
...
fix merge issues
2021-02-25 09:56:23 +01:00
7b22895f23
Merge pull request #3032 from DRracer/service-prep2
...
Make a special welcome message for Shipping/Service prep.
2021-02-25 08:51:47 +01:00
9ed713ab13
Merge pull request #3015 from 3d-gussner/PFW-1174
...
PFW-1174: Add pause/resume for USB/host prints via LCD menu
2021-02-25 08:50:41 +01:00
657767f073
Merge branch 'MK3' into MK3_Fix_LCD_stats
...
Fix merge issue
2021-02-24 09:01:30 +01:00
076613fd97
Show `Fil. sensor` in Support::Sensor info only if IR Sensor detected
2021-02-23 15:20:08 +01:00
08a6a4b25e
Enable Filament sensor action during print even if in Support::Sensor info
2021-02-23 15:19:03 +01:00
734e497cd0
Move wizard msgs into messages.h/c + add more translation markers
2021-02-23 15:09:19 +01:00
fdff5d84b2
Move Filament sensors to Support -> Sensor Info
2021-02-23 08:52:40 +01:00
8d4176a530
Add "Fan check [On|Off]" menu to tune
...
User can en/disable the fan check during print. This is very useful in case of false positive
fan errors to let the user to decide to finish print with "faulty" fan.
2021-02-23 07:24:33 +01:00
30b60e44d2
`|| isPrintPaused` is already in `PRINTER_ACTIVE`
2021-02-22 18:21:20 +01:00
fd154e4b69
Again revert Settings
2021-02-22 18:10:43 +01:00
5894883324
Fix USB/host FAN Error resume
...
Show Settings during Pause also for USB/host prints
2021-02-22 16:37:01 +01:00
9110ffd4ae
Revert `M602`
2021-02-22 16:36:21 +01:00
cbe207eb59
Fix issue #3037
...
`starttime` is only set for SD prints via gcode `M24 and M32`
2021-02-20 13:18:53 +01:00
461d3f6749
Remove duplicate function is_buffer_empty()
...
Use cmd_buffer_empty() instead
2021-02-19 17:06:00 +01:00
87f416f303
Keep wizard flag==2 even when a user restarts during Z-calibration
...
i.e. prevent jumping into the standard wizard if reset during Z-
calibration
2021-02-18 15:39:29 +01:00
495dcee066
Show LCD Settings during pause
2021-02-18 12:09:43 +01:00
a109d20506
Merge remote-tracking branch 'upstream/MK3' into PFW-1174
...
Fix merge issues
2021-02-18 11:05:31 +01:00
c1d8e6660b
Indentations
2021-02-18 10:07:40 +01:00
adf347fdf1
Merge pull request #3034 from 3d-gussner/MK3_PFW-960
...
PFW-960 Improve M0/M1/M117
2021-02-18 09:59:01 +01:00
291ee8e46d
Indentations
2021-02-18 09:53:14 +01:00
75a385d614
Indentations
2021-02-18 09:10:28 +01:00
4e768057e7
Use standard wdt_reset() from AVR lib
...
which translates to the one `wdr` instruction like before
+ wrap configuration of watchdog into cli/sei
2021-02-17 15:59:52 +01:00
2b4cf8d56e
Fix FANCHECK build error
2021-02-17 13:52:31 +01:00
a456c4a52d
Make watchdogReset() force_inline
...
It makes no sense keeping watchdogReset as a separate function which
must be called, since it only contains one instruction: "wdr".
Not only was the code larger by 32 bytes in total, but also much slower
(call+ret take 4 cycles together for no reason in this case).
Surprisingly, doing just this on FW 3.9.3 solves issue #2954 on the one
affected EINSY board, even though it makes not much sense (there must be
some other timing issue).
2021-02-17 13:04:46 +01:00
c3bea4d71c
Make a special welcome message for shipping/service prep
...
Another request from our Service dept. - the user shall be prevented
from skipping the intro wizard, because otherwise some preset/calibrated
features will look like not done - especially live-z calibration.
And since there are users, who send a machine to service to perform 1st
layer calibration only, they must not omit the Z-calibration at the
start after shipping.
2021-02-17 12:53:56 +01:00
c79bce010d
Don't show Settings during pause
2021-02-17 12:18:30 +01:00
7a84ad71dc
Merge pull request #3023 from DRracer/service-prep
...
Add Service prep. item into Factory reset
2021-02-17 10:43:08 +01:00
dbb0269bd4
Make indentation consistent with surrounding code in factory_reset()
2021-02-17 08:27:49 +01:00
afc15b42bb
Indentations
2021-02-17 08:13:32 +01:00
59c2b7e795
Fix Fan error issues.
2021-02-17 07:42:12 +01:00
66ea1bdfba
Indentations
2021-02-16 12:31:23 +01:00
d6c6517fcd
Back to Status after Resuming
2021-02-16 07:27:46 +01:00
c2637d9430
Documentation Show Main Menu
2021-02-15 18:35:04 +01:00
c07bcd172a
Fix NO Stop print during MBL
2021-02-15 18:34:08 +01:00
583993b7e2
Back to "Status" after gcode `M0/M1`
2021-02-15 15:25:04 +01:00
25928232e4
Merge remote-tracking branch 'upstream/MK3' into MK3_PFW-960
2021-02-15 13:06:47 +01:00
9071a9f8fd
Gcode `M1` must have a string while `M0` it is optional
...
As the `M0/M1` moved to the beginning of the parser
- parser would not be able to "find" `M1nn` command if the query was `M1` instead of `M1 `
- to be able to "stop/halt" without sending a string and display default message use gcode `M0`
- as there are no `M0nn` gcodes the parser can query `M0` without additional space needed as in `M1 `
2021-02-15 12:51:12 +01:00
fc270a356a
Fix indentations
2021-02-15 12:50:40 +01:00
86e117679c
Merge pull request #3011 from 3d-gussner/MK3_translation_0121
...
Fix few translations introduced with #2982
2021-02-15 11:16:54 +01:00
c95a8e13d7
Fix indentations to 4 spaces per tab
2021-02-12 11:47:02 +01:00
f810047a5c
Switch between Remaing and Change time every few seconds
...
- If `M73` `R,S,C,D` values set the LCD Info screen clock switchs between Remaining and Change time
- If Remaining time is 0 while Change time is >0 the clock switchs between Change time and actual printing time
- If Change is 0 while Remaining time is >0 the clock shows the Remaining time
- If both are 0 the clock shows the actual printing time
- `M73 C` values are shown in "Normal" mode
- `M73 D` values are shown in "Stealth" mode
- Changing the speed will try to calculate the espected times and show `?` behind `R` or `C`
2021-02-12 11:29:47 +01:00
d2e60aee90
Use `CLOCK_INTERVAL_TIME`
2021-02-11 10:45:26 +01:00
cf982b0d4d
Fix timer issue
...
The remaining time stays for ~5 seconds while the change time stays just for ~1 second
2021-02-11 10:20:06 +01:00
14b4bf5fa5
Add CLOCK_INTERVAL_TIME and ShortTimer IntervalTimer
2021-02-11 07:47:44 +01:00
b9a3fa2ddd
fix time at speed
2021-02-11 07:47:44 +01:00
b13d4b71d4
Add Change time behind existing message
2021-02-11 07:47:44 +01:00
4998cfb70d
Fix printing time being shown without `M73` gcode
...
Adjust estimated times only if speed is changed. Printing time has to stay printing time.
2021-02-11 07:47:43 +01:00
d063ffb141
Add parameter `D` to gcode `M73` for silent/stealth mode
2021-02-11 07:47:43 +01:00
83e791cbbe
Fix temp Build number
2021-02-11 07:47:43 +01:00
91c767b0f2
Reduce code size
2021-02-11 07:47:43 +01:00
ae48e7c3ce
indentation
2021-02-11 07:47:43 +01:00
f4ca6ee59d
Fix typo
2021-02-11 07:47:43 +01:00
cca90da64b
Include silent mode on time change
...
- depends on difference between print time remaining NORMAL vs SILENT mode
2021-02-11 07:47:43 +01:00
cb61436093
Add remaining time to change/pause/user interaction to LCD Info screen
...
- Add parameter `C` to gcode `M73`
- LCD Info screen switches to change time if last `M73` gcode contains `C` parameter
- Examples:
- `M73 P5 R120` will display on LCD ` SD 5% 02:00R ` if it is printing at 100% speed
- `M73 P5 R120 C60` will display on LCD ` SD 5% 01:00C ` if it is printing at 100% speed
Slicers can generate "Time to change/pause/user interaction" using `C<mins:0-65535>` parameter to "overwrite" the remaining print time.
To switch between time to change and remaining time just send in intervals `M73` with or without `C` parameter.
2021-02-11 07:47:43 +01:00
1c1ff722c0
Move sort_order to stack during ::presort
2021-02-10 18:16:26 +02:00
8397dae386
Remove comment
2021-02-10 18:15:18 +02:00
b4de57c365
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION
2021-02-10 17:08:28 +02:00
e010ca8ceb
Fix conflicting extern/inline declarations
...
The functions find_bed_induction_sensor_point_* have conflicting
extern and inline declarations.
These are used outside of the compilation unit only, and thus there's no
point in defining them inline.
This causes a compilation failure at O1 and above, which is strangely
avoided at Os.
2021-02-10 14:50:13 +01:00
a95d497289
Remove commented out code and deprecated comments
2021-02-10 13:45:30 +02:00
8a068d4d36
Remove redundant position=0 in ::presort
2021-02-10 13:44:39 +02:00
b72ce00183
Reduce reserved space on stack for LONG_FILENAME_LENGTH by 1 in presort
...
LONG_FILENAME_LENGTH already includes a +1 for the \0 string termination
2021-02-10 13:43:46 +02:00
7ad922e87b
Report fname instead of name
...
looks like being omitted in MK3 upstream fixes
2021-02-10 12:38:04 +01:00
8d39880abf
Fix compilation against latest MK3 branch
2021-02-10 12:23:02 +01:00
7aa4595211
Merge branch 'MK3' into thumbnails2
2021-02-10 12:15:57 +01:00
c1ead75a73
Remove commented debug code
...
the whole PR is ready for review after successfull tests
2021-02-10 11:18:59 +01:00
8bc46248f6
avoid having the block body twice in the code. Thanks to @DRracer
2021-02-10 11:09:29 +01:00
e5711ea84f
Indentation to 4 spaces for tabs
2021-02-10 11:03:23 +01:00
a830d5b6b7
getfilename_next
2021-02-09 20:31:02 +02:00
8d1c5cbb27
Fix position table offset
2021-02-09 20:29:06 +02:00
e6ffc99ff5
Fix compiler bug ... again ...
...
:endit: :blobhydraulicpress:
2021-02-09 16:28:13 +02:00
d2a7c62b50
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION
2021-02-09 16:17:43 +02:00
a47c971c75
Merge pull request #3010 from leptun/MK3_fix_M23
...
Fix M23
2021-02-09 15:06:51 +01:00
4fcbf95db6
apply RAII principle on the lsDive recursion limiter
2021-02-09 15:00:46 +02:00
9ccda4c57f
Optimize code size
...
... looks like I've been able to reduce the code by 80B by using the
clamp999() function. There are other spots this function can be used as
well, I didn't touch those yet.
2021-02-09 09:10:23 +01:00
e491b53f48
Merge branch 'MK3' into MK3_Fix_LCD_stats
2021-02-09 08:53:32 +01:00
5c3683b4ad
Merge pull request #3022 from 3d-gussner/PFW-1182
...
PFW-1182 Fix too long translations during Load/Unload Filament
2021-02-09 08:24:31 +01:00
d5d44d30a7
Merge pull request #2305 from 3d-gussner/MK3-Fix_M120_M121
...
Follow RepRap Wiki G-codes documentation
2021-02-09 07:52:14 +01:00
3668cdeb30
Add Service prep. item into Factory reset
...
upon request from our Service dept. - it is to do the same stuff like
Shipping prep., but keep the printer's stats intact. Still, this has to
be verified and may undergo some further changes.
2021-02-08 17:27:32 +01:00
5f49d65546
Farmers' request - allow file sorting menu item
2021-02-08 15:43:08 +01:00
92db282eca
Merge remote-tracking branch 'upstream/MK3' into PFW-960
2021-02-08 12:48:27 +01:00
aecbd7ab49
Fix `c=aa` location in lang files
...
Fix too long translations in Spanish and Italian
2021-02-08 12:17:41 +01:00
214695105c
Fix issue #2958
2021-02-08 11:33:46 +01:00
fb39e7296b
Uniform message `Press the knob`
2021-02-08 10:58:41 +01:00
c739aa9003
M23 full path support.
2021-02-07 21:51:44 +02:00
f5cde38a7c
Remove duplicit debug line
2021-02-06 21:06:37 +02:00
77a5082b56
Fix presort_flag duplicate declaration
2021-02-06 17:25:17 +02:00
52f7a71dce
More fixes that were extracted from #2405
2021-02-06 14:59:11 +02:00
f343e6432a
Fix diveSubfolder string termination
2021-02-06 12:55:51 +02:00
2dfe21358f
Merge pull request #2838 from wavexx/m204_travel_acceleration
...
Implement M204 T (separate travel acceleration)
2021-02-05 16:27:50 +01:00
77eb10000c
Merge pull request #2948 from 3d-gussner/PFW-1168
...
PFW-1168 Move Z up running xyz calibration
2021-02-05 16:18:07 +01:00
84d043d41b
Fix WorkDirDepth limit (for good this time)
2021-02-04 17:52:42 +02:00
90c0f33bc5
Fix farm filename when LFN is missing
2021-02-04 16:40:15 +02:00
080c44cb2e
Undo stupid hack for an error because of some compiler issue in the past
2021-02-04 16:37:24 +02:00
df163066fb
Fix "sorting files" messages for both ShellSort and BubbleSort
2021-02-04 15:44:15 +02:00
279c0aaa21
Fix double '>' bug and brutal refactoring
2021-02-04 14:21:37 +02:00
640e8d899b
Don't scroll one character past the filename end
2021-02-04 13:33:20 +02:00
8445f76eb9
Restructure for loop to work correctly in reverse
2021-02-04 13:26:15 +02:00
3c5c1e5167
Use enum for menu state code readability
2021-02-04 13:19:22 +02:00
ffc3a445ca
Remove even more dead code
2021-02-04 11:35:15 +02:00
d25b4a6bc9
Remove dead code (SDSORT_GCODE)
2021-02-03 19:18:13 +02:00
e52e68d4c1
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION
2021-02-03 18:30:36 +02:00
4c977cc335
Merge branch 'MK3' into MK3_NEW_SD_COMPILATION
2021-02-03 18:28:18 +02:00
186ce0f4b3
Handle acceleration settings in UVLO/power panic
...
Acceleration settings need to be saved in UVLO, since these are often
changed/set during a print. This is especially important for travel and
retract acceleration, which is usually set once per-print.
Saving and restoring is not 100% correct.
We save the current front-end value, which might ahead of the backend
when UVLO is triggered. Print acceleration, likely the most significant,
should be saved in the block buffer to be accurate.
Acceleration needs to be restored after the UVLO Z repositioning is
performed, using an M204 command. This is correct, however we don't save
the _temporary_ max acceleration limits set via M201, which could be
higher than the saved limits (via M500). This could result in lower
clamped values compared to the original print.
Maximum acceleration/jerk/feedrate limits should _all_ be saved in UVLO
in the future.
2021-02-03 11:28:51 +01:00
f7542aa064
Report travel acceleration in M503
...
Use the new M204 format consistently also in M503's output
2021-02-03 11:20:28 +01:00
76911f67db
Take advantage of the new is_uninitialized function
...
Save some space and perform some cleanup
2021-02-03 11:20:28 +01:00
45811f82aa
Initialize default travel_acceleration from EEPROM
...
When reading uninitialized memory, preset the travel acceleration to be
the same as the default acceleration.
2021-02-03 11:20:28 +01:00
5589954b77
Add DEFAULT_TRAVEL_ACCELERATION in all variants
...
Use the same value as DEFAULT_ACCELERATION for compatibility.
2021-02-03 11:20:28 +01:00
1c76152e62
Implement separate travel acceleration (M204 T)
...
Allow to separate extrusion and travel acceleration settings using M204,
as Marlin 1.1.x and 2.x does using M204 T.
This allows to reduce the number of instructions required during
printing, since resetting the acceleration for travel moves is no longer
required and can be done a single time during the print.
Provision for this parameter was pre-existing, but not implemented.
M204 has two forms: the lagacy format (Marlin <1.1):
M204 S[print-acc] T[retract-acc]
and the newer format:
M204 P[print-acc] R[retract-acc] T[travel-acc]
The distinction in the MK3 FW is done based on the presence of the P
parameter. If P is seen, the new format is adoped. In the new format
however, M204 T was ignored until this change.
To keep backward compatibility, M204 S[acc] will set both print and
travel acceleration, which is identical in behavior to recent versions
of Marlin.
2021-02-03 11:20:28 +01:00
2ba24fe0d4
Add pause/resume to USB/host prints via LCD menu
...
Depending if SD or USB/host print the firmware sends
- SD print: `// action:paused` or `// action:resumed` are send to inform USB/Host
- USB/host print: `// action:pause` or `// action:resume` are send to trigger the USB/host to handle it
- USB/host must handle `// action:pause` and `// action:resume` correctly to work
- Tested with Octoprint
- It handles every thing correctly
- Any combination of Octoprint and/or LCD `pause` and `resume` working correctly
- Tested with Pronterface
- It pauses BUT doesn't send the printer in pause position, and so it is not possible to `resume` from LCD menu
- I guess some Macros can fix that.
- Repetier Host/Server documentation shows that it should work. Not tested.
Could save 56 bytes in first step and additional 38 bytes adding `MSG_PAUSE_PRINT` to messages.c/.h
Updated `lang_en*.txt`
@todo Polish translation is 19 characters long (it still fits) BUT should be corrected to 18 chars.
2021-02-03 11:00:26 +01:00
896f4e1dd1
Fix compile error
2021-02-02 19:14:05 +02:00
f6ae379077
Fix dir_names array definition. Prevents overrun
2021-02-02 19:08:44 +02:00
5c9d202871
Change MAX_DIR_DEPTH from 10 to 6
...
You can't run M23 with so many directories as the length of the command will exceed the maximum allowed by cmdqueue
2021-02-02 19:08:19 +02:00
57e730c80c
Merge remote-tracking branch 'vojtech-pavlik/MK3' into MK3_Test_PRs
...
Fix merge issues PR1900
2021-02-02 13:49:34 +01:00
647cde0cae
Add documentation
2021-02-02 13:38:20 +02:00
2f4119a6d7
M552 - Printer IP address
2021-02-02 13:21:16 +02:00
2b81abb24c
Merge pull request #2814 from wavexx/MK3_PAT9125_I2C
...
Use hardware TWI for the PAT9125 (optical) filament sensor
2021-02-02 09:15:35 +01:00
15d76a7501
Remove duplicit incrementation of consecutive comment lines
...
It was left in the code in one of the refactoring/optimization passes.
It really didn't do any harm, but was limiting the performance of the
skipping algorithm.
+ some verification code added - will be removed after successful tests
2021-02-02 07:57:06 +01:00
40e45c5eaa
Merge pull request #3009 from leptun/PFW-1144-LongPathName
...
"M27 P" support. Get current file absolute filename (file path)
2021-02-01 14:41:15 +01:00
58c217a340
Merge pull request #2988 from leptun/PFW-1171-EEPROM_SN
...
Cache SN to EEPROM on startup
2021-02-01 14:24:13 +01:00
7e09df6a34
Add documentation
2021-02-01 14:54:44 +02:00
b6d56bc0f4
Change M27 argument from L to P as that makes more sense (path vs LFN))
2021-02-01 14:54:37 +02:00
ec4c1be058
Silence bUpdateEEPROM unused warning in MK3 variant
2021-02-01 07:09:44 +01:00
30131c9ab5
Patch broken string PROGMEM transition with setTargetedHotend() error
2021-02-01 06:12:37 +01:00
ea44d78d68
Merge branch 'MK3' into PFW-1171-EEPROM_SN
2021-01-31 17:19:00 +02:00
698499f00d
split timer0 and timer2 initialization. Move timer2 init early
2021-01-31 17:18:32 +02:00
6b6205d2f6
M27 refactoring and M27 L initial implementation
2021-01-31 15:06:20 +02:00
b8b75186fe
Remove the extra copy of CRITICAL_SECTION from fastio
2021-01-29 18:30:16 +01:00
31b3ad0613
Merge remote-tracking branch 'upstream/MK3' into MK3_PAT9125_I2C
2021-01-29 18:28:55 +01:00
2d71a071f0
Switch twi.c to fastio
2021-01-29 17:51:38 +01:00
1fa7b8cd8d
Move SDA/SCL pins into pins.h for fastio compatibility
...
fastio relies on macros for pin definitions, so we cannot use the const
declaration in Sd2PinMap or the arduino's definition.
Declare SDA/SCL_PIN into pins.h based on the current MCU, which is
identical in all our variants.
Remove the conflicting/unused declaration in Sd2PinMap.
2021-01-29 17:48:59 +01:00
30262b0a6e
Remove redundant definitions of CRITICAL_SECTION_*
...
Move CRITICAL_SECTION_START/END into fastio.h, where it's needed.
2021-01-29 17:30:04 +01:00
d75a0fdcbd
Merge remote-tracking branch 'upstream/MK3' into MK3_translation_0121
2021-01-29 15:38:48 +01:00
42311db5f1
Merge pull request #2789 from wavexx/MK3_TMC2130_DEDGE
...
Use/enable TMC2130 DEDGE support in MK3/MK3S
2021-01-29 11:13:09 +01:00
caf58b16b6
Fix handling EOF
...
+ save ~160B by using local variables
+ rename some of the vars to more descriptive names
+ remove consecutiveEmptyLines handling from cmdqueue
2021-01-29 08:29:51 +01:00
e9d5c44732
Also toggle pins efficiently in sm4.c
...
Use the same technique used in fastio to toggle pins efficiently in sm4
when DEDGE is used.
2021-01-29 00:13:49 +01:00
6c9c1423c6
Remove temporary changes from SdBaseFile.h
2021-01-28 09:42:50 +01:00
71d825d0f2
Return SdBaseFile into previous state
...
no changes necessary afterall
2021-01-28 09:41:30 +01:00
7279de7403
Separate reading G-code files and writing to a file
...
- extract common strings
- cleanup openFileWrite and openFileReadFilteredGcode formatting a bit
Alltogether - code size 400B down
2021-01-28 09:37:58 +01:00
c05b625b1c
Fix occasionally skipped valid G-code lines
...
which also allowed for removal of the pre-increment -> post-increment
workaround
2021-01-28 08:13:16 +01:00
d1fd5a555f
Clean up gfReset()
2021-01-27 14:12:11 +01:00
b2cf5b7b6c
Fix seekSetFilteredGcode()
...
+some more debug code which will vanish after all is done and verified
2021-01-27 13:01:25 +01:00
b6c59e08ac
Workaround ++gfCacheP into postincrement ld r22, Z+
...
TODO: ideally improve the automaton to work with postincrement only, at
least in this case.
2021-01-27 09:52:20 +01:00
d275fe0e83
Extract gcode filter from SdBaseFile into SdFile + optimization
...
- Start saving instructions as the whole PR was >1KB long.
- It turned out the compiler was unable to understand the core skipping
cycle and an ASM version had to be used.
- Add seekSet aware of the G-code filter
2021-01-27 09:33:28 +01:00
c3758d350e
Fast skipping of large comment blocks
...
This is an extension/optimization of PR #2956 .
It uses the cached 512B block buffer to avoid heavy-weight read() in SdBaseFile.
Even though this principle allowed the AVR to skip ~600KB of data within ~5 seconds,
the impact on code base is huge, especially into well proven and long-term stable
parts like reading a file from the SD card.
The sole purpose of this PR is to show/verify the possibility of the AVR CPU
in relation to adding thumbnails into MK3 G-codes.
Moreover, this PR shall not be merged unless the missing/commented features
are restored - especially file seeking and M84 search.
PFW-1175
2021-01-27 07:03:51 +01:00
dcc6605809
Workaround for skipping large comment blocks
...
If there are large blocks of comments in the G-code,
the printer may get shot down by its own watchdog.
Watchdog is generally set to 4s and updated only
in manage_heaters (and some other spots in some specific cases).
So far, the code reading the file and feeding it into Marlin
cycles indefinitely until it finds valid G-code lines and fills up the
command queue.
If the block is large enough, the printer cannot read it completely
within those 4s.
A simple workaround - bail out after some consecutive empty/comment
lines to enable other parts of code do their job (especially
manage_heaters).
Tested on MK404, previous FW fails with 600KB of comment lines at the
beginning, this patch survives. The printer even draws some update
on its status screen before starting a real print.
2021-01-27 07:03:51 +01:00
a9625747db
Reinstate the nop instruction as delay in non-DEDGE
...
When TMC2130_MINIMUM_PULSE is 0 a minimum delay is implied.
In this case, use a single "nop" instruction.
2021-01-26 19:43:29 +01:00
d3734b02cc
Also fix delay instances inside unused BACKLASH_[XY]
2021-01-26 16:18:23 +01:00
b17cdcd4d7
Ensure MINIMUM_PULSE is always 0 in DEDGE mode
...
This ensures delays are always properly elided without having to check
for DEDGE all over the place.
2021-01-26 16:12:59 +01:00
2a6989ecd5
Remove TMC2130 special-cases
...
With the new STEPPER_MINIMUM_DELAY being automatically removed for
TMC2130 we no longer need to add specialized #ifdefs for DEDGE in
babystep.
2021-01-26 16:09:23 +01:00
4fed728e08
Elide delayMicroseconds for TMC2130 in non-DEDGE mode
...
Introduce new macros TMC2130_MINIMUM_DELAY/STEPPER_MINIMUM_DELAY for
blocking pauses.
If MINIMUM_PULSE has defined to be zero, avoid the delay call entirely.
2021-01-26 16:02:53 +01:00
f40c593d11
Fix few translations not being used due to spaces or upper case
2021-01-26 14:15:34 +01:00
c28e5a9dbc
Farmer's request 2
...
Farmers request having the Change filament menu item always visible in
the main menu and located after the Live Adjust Z (which disappears
after the first few printed layers).
2021-01-26 12:19:41 +01:00
bfe93d3959
Merge pull request #2951 from DRracer/pvb-08
...
Add PVB preheat and 0.8mm nozzle presets
2021-01-26 12:09:41 +01:00
ad5d068690
Update char lengths part 1
...
Fix some too long translations
2021-01-26 12:09:35 +01:00
891f37a622
Merge pull request #2982 from DRracer/codesize
...
Reduce code size and RAM usage
2021-01-26 12:04:39 +01:00
c555907a12
Remove duplicate string `G-code sliced for a different printer type. Please re-slice the model again. Print cancelled.` using `MSG_GCODE_DIFF_PRINTER_CANCELLED`
2021-01-26 11:01:50 +01:00
51d1e0bd8a
Remove duplicate string `G-code sliced for a different printer type. Continue?` using `MSG_GCODE_DIFF_PRINTER_CONTINUE`
2021-01-26 10:42:56 +01:00
7916f8b9e8
Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize
2021-01-26 10:13:11 +01:00
0eb7261e29
Save ~100B on menu implementation
2021-01-26 09:29:17 +01:00
ba8386573a
Remove duplicate string `Resume print` using `MSG_RESUME_PRINT`
2021-01-26 09:23:55 +01:00
c6a01b3806
Remove duplicate string `Reset` using `MSG_RESET`
2021-01-26 09:15:46 +01:00
ab5aad636f
Remove duplicate string `Mesh Bed Leveling` and `Mesh bed leveling` using `MSG_MESH_BED_LEVELING`
...
Fixed few too long translations
2021-01-26 09:05:38 +01:00
f4cee7ce84
Merge pull request #2983 from leptun/MK3_fix_sm4.h_line_ending
...
Fix sm4.h line ending
2021-01-26 08:45:07 +01:00
bce9f8c949
Merge pull request #2984 from leptun/MK3_Serial_LF_only
...
Do not send CR on the serial line
2021-01-26 08:42:47 +01:00
c465417f50
Merge pull request #2987 from leptun/PFW-1144-LongPathName
...
"M20 L" support. Print long filenames
2021-01-26 08:40:26 +01:00
84ed0725f2
Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize
2021-01-26 08:32:03 +01:00
bce8501eea
Remove duplicate string `Extruder` using `MSG_Extruder`
2021-01-26 08:31:21 +01:00
c6588193ad
Fix some more stuff in cardreader.cpp
...
Saved 4B of flash and 60B of RAM
2021-01-26 09:25:41 +02:00
ab18a3ccc3
Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize
2021-01-26 08:24:11 +01:00
530b9f50b8
Remove duplicate string `Eject filament` using `MSG_EJECT_FILAMENT`
...
Fix few translations
2021-01-26 08:22:08 +01:00
348902240e
Fix code_seen_P("fv") broken by one of the merges
2021-01-26 08:02:33 +01:00
269fabc330
Remove duplicate string `Cut filament` using `MSG_CUT_FILAMENT`
2021-01-26 07:15:46 +01:00
797d8e74a3
Remove duplicate string `Checking X axis` and `Checking Y axis` using `MSG_CHECKING_X` and `MSG_CHECKING_Y`
2021-01-26 07:10:57 +01:00
2d1e1e4cee
Remove duplicate string `Fans check` using `MSG_FANS_CHECK`
2021-01-25 20:13:12 +01:00
d117a299f7
Remove duplicate string `Fil. runouts ` using `MSG_FIL_RUNOUTS`
2021-01-25 20:04:18 +01:00
10bbd64b41
Remove duplicate string `Crash` using `MSG_CRASH`
...
Better Italian translation, thanks to @wavexx
Fix Polish translation as it was too long for the menue and caused LCD issues.
2021-01-25 18:53:53 +01:00
4878db7365
Remove duplicate string `Last print failures` using `MSG_LAST_PRINT_FAILURES`
...
Fix too long translations in Spanish and Italian for this message
2021-01-25 18:38:35 +01:00
99867c8fbd
Remove duplicate string `Total failures` using `MSG_TOTAL_FAILURES`
2021-01-25 18:06:47 +01:00
8f0a45e8a4
Remove duplicate string `Steel sheets` and `Total` using `MSG_STEEL_SHEETS` and `MSG_TOTAL`
2021-01-25 17:58:51 +01:00
7222cf05cf
Remove duplicate string `MMU Fails` and `MMU Load Fails` using `MSG_MMU_FAILS` and `MSG_MMU_LOAD_FAILS`
2021-01-25 17:38:36 +01:00
fbb3fad64b
Remove duplicate string `Last print` using `MSG_LAST_PRINT`
2021-01-25 16:54:26 +01:00
7891d12a32
Remove duplicate string `Is filament loaded?` using `MSG_FILAMENT_LOADED`
2021-01-25 16:44:55 +01:00
223f32deae
Remove duplicate string `HW Setup" using `MSG_HW_SETUP`
2021-01-25 16:15:57 +01:00
5c1da227fe
Merge branch 'codesize' of https://github.com/DRracer/Prusa-Firmware into DRracer_codesize
2021-01-25 16:00:46 +01:00
377a59c624
Remove duplicate string `Belt status`
2021-01-25 15:53:31 +01:00
d8917a304a
Reuse lcd_space() instead of in-place printing of spaces in a cycle
...
Saves another ~40B
2021-01-25 15:21:25 +01:00
783e4bbaf9
Add lcd_putc_at (code down >150B), refactor lcd_selftest_screen_step
...
(RAM down 10B)
2021-01-25 14:58:57 +01:00
3975415490
Merge branch 'MK3' into codesize
2021-01-25 12:43:30 +01:00
58351fb27a
Merge pull request #2977 from DRracer/farm-patch1
...
Farmers' requests
2021-01-25 11:15:44 +01:00
514321f2ce
Remove farm_no completely + reuse prusa_stat_farm_number() where
...
applicable
2021-01-25 11:09:28 +01:00
2b3729125d
Prevent wdt reset during file listing
2021-01-25 11:46:51 +02:00
c1ff6242b0
Avoid copying FW version number into RAM - use the PROGMEM string
2021-01-25 09:03:04 +01:00
4f769f0faa
PRUSA RESET safety precaution
2021-01-25 09:58:12 +02:00
9fa9d6b063
Move farm strings to PROGMEM
2021-01-25 09:48:17 +02:00
6a62674bd8
Keep PRUSA RESET available even in non-farm mode
2021-01-25 08:43:37 +01:00
98a4da571d
Merge branch 'farm-patch1' of github.com:DRracer/Prusa-Firmware into farm-patch1
2021-01-25 08:39:20 +01:00
9bfada94f0
Remove commented code
2021-01-25 08:38:44 +01:00
e8e4aabfdb
Add gcode documentation
2021-01-22 21:07:14 +02:00
31a6270f69
Abuse \n in lcd printing instead of constantly calling other functions
...
"other functions" being lcd_set_cursor and lcd_print(char). Saves 100B of flash
2021-01-22 20:12:11 +02:00
4d3f056b81
Fix factory reset menu rendering
2021-01-22 20:07:27 +02:00
37c431abd9
another lcd_puts_at_P
2021-01-22 19:44:46 +02:00
3ccd1b2b2b
Refactor lcd_set_cursor + lcd_puts_P -> lcd_puts_at_P
...
saves considerable amount of flash
2021-01-22 18:34:47 +01:00
bc7d36b6ff
Fix sm4.h line ending
2021-01-22 18:57:24 +02:00
da21916473
Change printf_P without format arguments and NL to puts_P only
2021-01-22 18:56:05 +02:00
9b34789398
Cleanup reset_menu()
2021-01-22 17:54:44 +01:00
90d22a376d
Remove unused vars in xyzcal.cpp
2021-01-22 17:50:08 +01:00
2780a03967
Improve duplicate_Tcode_ignored
...
kudos to @leptun
2021-01-22 17:47:44 +01:00
3dc85b319c
Marlin_main.cpp hacks
...
- code_seen("string") -> code_seen_P(PSTR("string")) saved >100B of RAM!
- serial print "." -> '.' saved some code
- extract commonly used string
- SERIAL_PROTOCOLLN("") -> SERIAL_PROTOCOLLN() as no argument is
necessary
2021-01-22 17:15:36 +01:00
4dec171266
Reduce code by 104 bytes in xyzcal.cpp
...
Extract CLAMP_median into a non-inline function.
The extra instructions to call that function do not matter from the
speed perspective
2021-01-22 17:13:28 +01:00
c710253cca
Code cleanup and size reduction and RAM optimization
...
Replase single character strings with single characters when calling
lcd_print
2021-01-22 17:11:51 +01:00
9fda6b774d
Do not send CR on the serial line
2021-01-22 17:58:01 +02:00
f809691003
Merge pull request #2968 from espr14/PFW-1186
...
Calibration: reduce code size PFW-1186
2021-01-22 14:05:13 +01:00
eceb7b4e5f
Merge pull request #2981 from 3d-gussner/PFW-1140-2
...
PFW-1140 Add fan speed and position auto report
2021-01-22 13:00:23 +01:00
defbaa6ff8
Merge branch 'MK3' into PFW-1186
2021-01-22 12:46:25 +01:00
4c952a0a9c
Merge pull request #2962 from espr14/PFW-1178
...
Calibration: code cleaning PFW-1178
2021-01-22 12:41:24 +01:00
008c6a2590
Remove defines
2021-01-22 12:26:29 +01:00
ab59449b7c
Merge pull request #2961 from espr14/PFW-1179
...
Calibration: print skew results PFW-1179
2021-01-22 12:24:52 +01:00
85f2c29dfe
Merge pull request #2960 from espr14/PFW-1169-3
...
Calibration: more accelerations, fix scan, more robust circle search PFW-1169
2021-01-22 12:20:35 +01:00
ede3f34051
Documentation
2021-01-22 10:40:29 +01:00
ced3d9fa77
"M20 L" support. Print long filenames
2021-01-22 11:13:44 +02:00
31951fe8c9
Code refactoring
...
Motivation:
- save some RAM joining the autoreport flags into 1 byte
- encapsulate the magic of setting bit masks/features into a class with
a stable public interface
2021-01-20 11:46:25 +01:00
70d254a1fc
Allow resetting when not in farm mode
2021-01-19 13:39:21 +02:00
48b4bdfe8e
Make the PRUSA RESET command functional on the miniRambo
2021-01-19 13:36:08 +02:00
542677c080
Prevent switching to serial port 1 on miniRambo and such
2021-01-19 13:11:48 +02:00
9b847715ac
Rename F0 to FRM on the status screen
2021-01-19 13:11:25 +02:00
3f5cfc4e61
Move the change filament button to the main menu when farm printing
...
PFW-945
2021-01-19 13:06:23 +02:00
a9d8ddc89c
Farmers' requests 1
...
- remove the UI and related stuff to setting a farm number (the
communication protocol must remain intact)
- remove confirmation after print finished ("Print OK")
Both requests are highly welcome, since they allow for lowering the code
size by >1KB
PFW-963, PFW-927
2021-01-19 09:58:02 +01:00
9264454d3a
Gcode `M123` only if FANCHECK and TACHOs are defined
...
Gcode `M155` added parameter "C" to activate auto-report for temperatures, fans and positions
Updated doxygen
@todo Update RepRap Wiki
@todo improve code
2021-01-19 09:01:46 +01:00
735895c6bc
Use fabs
2021-01-14 16:38:34 +01:00
ca4e638ea2
Don't use extrusion in XYZ calibration
2021-01-14 13:19:30 +01:00
20c3f4cb77
Update comments
2021-01-14 12:53:12 +02:00
dea3f23a69
PRUSA SN in eeprom
2021-01-14 11:52:22 +02:00
9867ecd3f9
Reduce unnecessary code
2021-01-13 13:59:20 +01:00
21d6f970ef
Fix build
2021-01-12 16:26:46 +01:00
f3faf651c5
Move down before scanning
2021-01-12 16:12:34 +01:00
9dceb488b6
Revert double scanning
2021-01-12 16:04:04 +01:00
546812294e
Clean serial output
2021-01-12 00:34:28 +01:00
d7507649d8
Remove degree char
2021-01-12 00:28:46 +01:00
180af46fe4
Try double height
2021-01-12 00:27:06 +01:00
333526f65d
Single skew output
2021-01-11 23:14:12 +01:00
e6e44fe188
Convert to degrees
2021-01-11 23:13:08 +01:00
b8443b00ad
Reverse reverse
2021-01-11 22:18:50 +01:00
09892bec52
Reverse
2021-01-11 18:46:56 +01:00
78f8f1e8f9
Remove stray serial newlines in fsensor autoload messages
2021-01-11 18:31:36 +01:00
211e5f5f37
Define DBG output
2021-01-11 17:31:26 +01:00
904a23b69e
Report calibration results
2021-01-11 17:02:41 +01:00
2e40a27460
Alignment, comments
2021-01-11 15:40:12 +01:00
4728bf2182
Merge pull request #2875 from wavexx/raise_while_preheating
...
Raise Z while preheating when auto/[un]loading the filament
2021-01-11 07:45:54 +01:00
1a6b6fb491
Merge pull request #1776 from wavexx/unused_tmc_defines
...
Remove an unused define
2021-01-11 07:43:44 +01:00
ef51652e39
Merge pull request #1758 from wavexx/disable_filament_checks_in_extr_menu
...
Disable filament checks inside the Move -> Extruder menu
2021-01-11 07:42:25 +01:00
a064ce4722
Add gcode `M123` Tachometer value
2021-01-10 15:15:44 +01:00
8a083c9970
Add PVB preheat and 0.8mm nozzle presets
...
minor features reflecting the latest announcement
Needs some 300B of CPU flash though, after 3.9.3 we need to optimize code
size again.
2021-01-08 13:52:39 +01:00
5c3513a6cc
Merge pull request #2397 from odaki/flashair_display_ip
...
Show the FlashAir IP address
2021-01-08 12:20:12 +01:00
584177e8fd
Fix E mask
2021-01-08 10:24:36 +01:00
f549ce690a
Merge pull request #2949 from prusa3d/MK3_3.9.3
...
Merge 3.9.3 back into MK3
2021-01-08 10:20:40 +01:00
3329d34ce4
Fix doxygen issue with "^" and "|" only in one line
...
Doxygen 1.8.13 had no issues but newer doxygen version are failing
to build tables, if a line only consists of "^" and "|"
2021-01-08 09:40:13 +01:00
0ed6b537a8
Merge branch 'MK3' into MK3_3.9.3
2021-01-07 13:27:51 +01:00
603d704178
Version changed (3.9.3 build 3556)
2021-01-07 12:50:58 +01:00
8a27b6abdb
Move Z up before xy home running xyz calibration
...
to prevent scratches on bed and sheet
2021-01-07 11:45:40 +01:00
2981b9e9c5
OctoPrint needs new lines
2021-01-04 14:59:12 +01:00
cc9e7b9376
Fix comments, remove unused
2021-01-04 13:01:06 +01:00
49d57ed621
Median dynamic circle
2020-12-30 17:02:31 +01:00
a9fd09ca3f
Implement median
2020-12-30 15:15:17 +01:00
13fefaa1bf
Fix typo
2020-12-30 15:01:32 +01:00
03b87ae68b
Add 8 pixel circle pattern
2020-12-30 13:08:47 +01:00
c14e725574
Fix moves
2020-12-29 18:27:33 +01:00
c2ab8785f4
Revert Manhattan
2020-12-29 17:31:34 +01:00
c1e6567461
Fix step axis coding
2020-12-29 17:17:32 +01:00
922769cefb
axis -> axes
2020-12-29 17:14:18 +01:00
a01dfe26fe
Add Manhattan movement
2020-12-29 17:13:11 +01:00
6461206e08
Fix direction setting
2020-12-29 14:19:05 +01:00
b6e78bf900
Fix direction
2020-12-29 14:08:30 +01:00
c11e8654da
Revert both directions, refactor code
2020-12-29 12:39:35 +01:00
e86ba5e26d
Scan only once
2020-12-28 16:45:39 +01:00
7e02a7f118
Version changed (3.9.3-RC1 build 3555)
2020-12-26 15:45:34 +01:00
d61cdf2b88
Merge pull request #2932 from espr14/PFW-1165-2
...
Calibration: Turn off speed optimization due to MK2.5 PFW-1165
2020-12-25 18:22:04 +01:00
80e32ce1a5
Turn off speed optimization due to MK2.5
2020-12-25 15:27:42 +01:00
12f4102272
Group PINDA defines
2020-12-23 21:00:02 +01:00
76eb743139
Set default SuperPINDA toggle on MK2.5/S to NO
2020-12-23 20:59:33 +01:00
4b510fef0a
Add PINDA_TEMP_COMP variable to enable SuperPINDA toggle menu/function
2020-12-23 20:59:08 +01:00
a97587f373
Changed PINDA_MINTEMP having own value
...
Prevent bad readings/issues if someone changes the bed thermistor that is "better" with lower min values and creates a custom firmware.
The firmware will now be in the range of the PINDAv2 thermistor independant from the bed thermistor (which may change and need adjustments)
2020-12-23 20:58:44 +01:00
732b6e0cad
Cleanup
2020-12-23 20:58:20 +01:00
62c36f718b
Add SuperPINDA support for MK2.5/S
...
- Changed DETECT_SUPERPINDA to SUPERPINDA_SUPPORT as on miniRAMo the thermistor readings below 30°C
aren't accurate egnough to determine if SUPERPINDA is connected or not
- Add LCD toggle menu Settings -> HW Setup -> SuperPINDA [Yes/No] to overwrite SuperPINDA detection
- If EEPROM_PINDA_TEMP_COMPENSTATION is empty = 0xff then detect SuperPINDA by checking thermistor
- If EEPROM_PINDA_TEMP_COMPENSTAION is 0 then forec enable for temperature compensation menues and functions
- If EEPROM_PINDA_TEMP_COMPENSATION is 1 then force disable for temperature compensation menues and functions
2020-12-23 20:56:50 +01:00
e6eb3be247
Set jerk = 1, accel. = 1000
2020-12-23 16:56:04 +01:00
979525f028
Add more restarts
2020-12-22 19:34:12 +01:00
25d138d198
Revert max.speed
2020-12-22 15:10:01 +01:00
e24a763e46
Cleanup
2020-12-22 14:45:55 +01:00
8df2eccf45
Remove defines and unused vars
2020-12-22 14:36:37 +01:00
25d6e24778
Add comments
2020-12-22 14:16:20 +01:00
90c8045f7d
Clean the code
2020-12-22 13:59:50 +01:00
20659ec818
Add debug output
2020-12-22 12:51:22 +01:00
c397e9249a
Restart scanning
2020-12-21 19:33:36 +01:00
1610c96fc4
Fix and report circle divergence
2020-12-21 18:05:52 +01:00
744763f0a9
Fix diagonal movement
2020-12-21 17:34:54 +01:00
de23a845b4
Remove unused
2020-12-21 15:53:51 +01:00
3c9168f8f6
Optimize diagonal
2020-12-21 15:52:25 +01:00
9a59369c77
Diagonal acceleration
2020-12-21 15:32:09 +01:00
27ff6b0057
Fix build
2020-12-21 13:11:48 +01:00
9b55ff9de1
Acceleration up and down
2020-12-21 13:05:26 +01:00
f39a0999e1
Prepare full acceleration control
2020-12-18 21:33:43 +01:00
ccf26e4e7a
Basic acceleration
2020-12-18 20:04:00 +01:00
a8f4207df9
New XYZ calibration algorithm
2020-12-17 18:19:36 +01:00
2ac106d9fe
Merge branch 'MK3' into MK3_random_patches
2020-11-30 09:14:58 +02:00
61c48df0bd
Merge remote-tracking branch 'upstream/MK3' into flashair_display_ip
2020-11-23 15:53:03 +09:00
f96f75bd17
Fix warning and a bit of indentation
...
Saved 64B of flash and 1B of SRAM
2020-11-16 10:58:26 +02:00
f3953d7c83
Merge branch 'MK3' into MK3_random_patches
2020-11-16 09:11:12 +02:00
c0070506fb
Merge branch 'MK3' into flashair_display_ip
2020-11-13 22:28:22 +09:00
d013abfd52
Merge pull request #2890 from prusa3d/MK3_3.9.2
...
Merge MK3_3.9.2 into MK3
2020-11-13 13:03:35 +01:00
807eddafb0
Remove debugging code
2020-11-13 12:12:18 +02:00
43ace00a24
Fill the progress bar at the end and code optimizations
2020-11-12 18:43:48 +02:00
5ad125cbed
Merge branch 'MK3' into MK3_filecheck_progress_bar
2020-11-12 15:53:33 +02:00
396ee0fde2
Version changed (3.9.2 build 3524)
2020-11-10 10:27:18 +01:00
176e2674b9
Fix M105 ok hack
2020-11-09 21:49:56 +02:00
023ccb0e89
Fix double ok in M603
2020-11-09 21:49:56 +02:00
0c305ee5f5
Fix warning
2020-11-09 21:49:56 +02:00
4abf1f436a
Gracefully dump the queue + fixes to fancheck
2020-11-09 21:49:56 +02:00
fdbbc7d62a
Terminate last line from the SD card even if it doesn't have a \n
2020-11-09 21:49:56 +02:00
ff56ece6f8
Remove redundant get_command prototype
2020-11-09 21:49:56 +02:00
5f0e4a1cac
Temporary M602 patch. Needs more work
2020-11-09 21:49:56 +02:00
6873a9d28e
Only send capabilities when M115 is run without arguments
2020-11-09 21:49:56 +02:00
0ee8e1f424
Fix missing ok in M601
2020-11-09 21:49:56 +02:00
e5ebf7c67f
Fix missing keep-alive messages
2020-11-09 21:49:56 +02:00
26f62f042e
Use the longest filename instead of just using the long filename in M27
2020-11-09 21:49:56 +02:00
4747c8c9f5
Increase top Z-offset limit based on some test results
2020-11-09 12:29:19 +01:00
5184910ef9
Try harder finding the calibration center
...
with alternative PINDAs it looks like their properties vary a lot
and searching for the calibration center requires trying different
Z levels.
2020-11-09 06:33:41 +01:00
cd4e16ef9f
XYZ calibration tune
...
PFW-1159
2020-11-06 08:25:56 +01:00
e28159122f
Make MIN_Z_FOR_LOAD/UNLOAD the same
...
When unloading + preheat immediately followed by a load, the carriage is
raised first up to 20mm, then again to 50mm.
With PR #2318 it makes sense to make more space for the extra extrusion
anyway, so make them the same. This moves the carriage only once _while_
preheating, which is nice.
2020-10-29 15:30:16 +01:00
5f23474c95
Raise Z while preheating when auto/[un]loading the filament
...
Preheating already raised Z to avoid scorching the PEI sheet, as does
filament loading/unloading to allow for excess material to be removed.
However, when loading/autoloading/unloading via the LCD with a cold
nozzle the preheating menu is performed before the carriage is raised,
leaving the carriage close to the sheet while heating the nozzle.
Pre-raise the carriage already while waiting, so that the subsequent
move is automagically skipped.
Set bFilamentWaitingFlag only once to perform both the LCD
initialization and raising to the appropriate height.
Should fix #2761
2020-10-28 20:49:28 +01:00
c05d4c9112
Update messages.h
...
cleanup space
2020-10-21 17:04:20 +02:00
a84d7ef8d6
corectino of declaration
2020-10-13 16:56:57 +02:00
3d-gussner
DRracer
D.R.racer
espr14
awenelo
Alex Voinea
Yuri D'Elia
odaki
MartinPoupa