cc84e326fe
Merge pull request #4224 from 3d-gussner/MK3_Rename_Thermal_model
...
Rename temp model to thermal model
2023-07-26 16:37:48 +02:00
897d05d268
Fix @wavexx complains
2023-07-26 09:33:16 +02:00
6feab85252
Rebase update REVO and solve @wavexx comments
2023-07-25 17:24:02 +02:00
8ae0e1952e
Rename `temp_model.h` to `thermal_model.h`
...
`/temp_model` to `/thermal_model`
`Temperature_model` to `Thermal_model`
minor format in eeprom.h
2023-07-25 17:13:07 +02:00
940b18e0b2
Format `eeprom.h` doxygen documentation
2023-07-25 17:13:07 +02:00
a6b209d36d
Rename `Temperature Model` to `Thermal Model`
...
`Temperature model` to `Thermal model`
`temperature model` to `thermal model`
2023-07-25 17:13:07 +02:00
78ed427166
Rename `TempModel` to `ThermalModel`
2023-07-25 17:13:07 +02:00
600a7a0316
Rename `Temp Model` to `Thermal Model`
2023-07-25 17:13:07 +02:00
44ae8033eb
Rename upper case `TEMP_MODEL` to `THERMAL_MODEL`
2023-07-25 17:13:07 +02:00
dac07d11ba
Rename lower case `temp_model` to `thermal_model`
2023-07-25 17:13:07 +02:00
780f2db3d1
fixup
2023-07-25 17:10:44 +02:00
c647e4cfa4
fix build
2023-07-25 17:10:44 +02:00
f40defd2a9
Rename minsegmenttime --> min_segment_time_us
...
Also fixed wrong unit in Configuration prinout (M500)
should be us and not ms
Also used %lu format for uint32_t instead of %.2f
2023-07-25 17:10:44 +02:00
842dcc6560
Remove MAX_E_STEPS_PER_UNIT and MIN_E_STEPS_PER_UNIT
...
These constants are not used anywhere so there is no need to rename them
I propose they be removed as cleanup
2023-07-25 17:10:44 +02:00
ec896df62a
Remove commented DEFAULT_AXIS_STEPS_PER_UNIT
...
They serve no function at this point
2023-07-25 17:10:44 +02:00
6c95d340c1
Remove dead code axis_travel_steps_per_sqr_second
2023-07-25 17:10:44 +02:00
a8c75090b2
Change unsigned long to uint32_t
2023-07-25 17:10:44 +02:00
8689a28776
Rename max_acceleration_units_per_sq_second to max_acceleration_mm_per_s2
2023-07-25 17:10:44 +02:00
21faa52aab
Rename axis_steps_per_unit to axis_steps_per_mm
2023-07-25 17:10:44 +02:00
ff1cd2bfb2
dcodes: fix build when DEBUG_DCODES is enabled
2023-07-25 15:02:49 +00:00
5b8813bf18
tmc2130: fix octoprint error
2023-07-25 15:02:49 +00:00
fa6aae60db
optimisation: use SERIAL_PROTOCOLLN
...
Change in memory:
Flash: -12 bytes
SRAM: 0 bytes
2023-07-25 15:02:49 +00:00
9d15a4e63b
optimisation: reduce code size in M916, M917, M918
...
Change in memory:
Flash: -148 bytes
SRAM: 0 bytes
2023-07-25 15:02:49 +00:00
c090868fa2
optimisation: reduce code size in M907
...
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2023-07-25 15:02:49 +00:00
53c8bfa928
cleanup: remove unused variable
...
No change in memory
2023-07-25 15:02:49 +00:00
7029af05fa
optimisation: reduce code size in pid_extruder()
...
Author: leptun
Change in memory:
Flash: -14 bytes
SRAM: 0 bytes
2023-07-25 15:02:49 +00:00
6623d45af9
optimisation: Tighter LCD timing
...
Author: leptun
Change in memory:
Flash: -14 bytes
SRAM: 0 bytes
2023-07-25 15:02:49 +00:00
5288d615f8
optimisation: lcd avoid streams
...
Author: leptun
Change in memory:
Flash: -124 bytes
SRAM: 0 bytes
2023-07-25 15:02:49 +00:00
5d880919f8
Align comment
2023-07-25 09:00:47 +02:00
d5f4f6700d
Optimise the acceleration limit checks
...
Kudos goes to Marlin FW
Change in memory:
Flash: -314 bytes
SRAM: 0 bytes
2023-07-25 09:00:47 +02:00
1984091c10
Rename axis_steps_per_sqr_second to max_acceleration_steps_per_s2
2023-07-25 09:00:47 +02:00
c067318427
cleanup language menu
...
Change in memory:
Flash: -50 bytes
SRAM: 0 bytes
2023-07-25 08:58:52 +02:00
0ab10a9df6
tmc2130: chopconf: add comments to structure
2023-07-25 08:56:43 +02:00
ed13d008d9
tmc2130: minor code cleanup
...
Using tmc2130_wr() instead makes the code a bit more
aligned and easier to read IMO
No change in memory
2023-07-25 08:56:43 +02:00
3819f7a473
tmc2130: Refactor code for setting/changing currents
...
- Always re-calculate the Vsense flag when the currents are changed
- Make sure Hold current is not larger than Run current
- Added SetCurrents() function from MMU FW
- Added MotorCurrents structure from MMU FW
- Various code size optimisations e.g. in power panic
Change in memory:
Flash: -10 bytes
SRAM: +4 bytes
2023-07-25 08:56:43 +02:00
a87faba2bd
tmc2130: pull TMC2130_CNSTOFF_E outside tmc2130_setup_chopper
...
We can probably improve tmc2130_chopper_config further by adding
a constructor.
No change in memory
2023-07-25 08:56:43 +02:00
664d4e2bbe
tmc2130: chopconf: Add constructor to ChopConfU
...
Removed redundant initialisations which the constructor now takes care of
Change in memory:
Flash: +8 bytes
SRAM: 0 bytes
2023-07-25 08:56:43 +02:00
bb8ebbb5e3
tmc2130: chopconf: simplify intpol config
...
Pull the preprocessor code outside tmc2130_setup_chopper
No change in memory
2023-07-25 08:56:43 +02:00
2d2ab6e889
tmc2130: chopconf: simplify dedge code
...
move dedge preprocessing out of tmc2130_setup_chopper
We can use default_dedge_bit to initialise
the dedge bit in the chopconf constuctor later
No change in memory
2023-07-25 08:56:43 +02:00
3842a5c98c
optimisation: correctly reset registers in tmc2130_home_exit
...
Previously Z-axis would not be reset to
TMC2130_GCONF_DYNAMIC_SGSENS
in tmc2130_home_exit() when
TMC2130_STEALTH_Z is defined
Pulled configuration code into one common function
this ensures the registers are set correctly like in tmc2130_init()
Change in memory:
Flash: -206 bytes
SRAM: 0 bytes
2023-07-25 08:56:43 +02:00
60f1c2095f
optimise tmc2130_setup_chopper further
...
Reduce code duplication
Change in memory:
Flash: -50 bytes
SRAM: 0 bytes
2023-07-25 08:56:43 +02:00
ae1a7898dc
optimisation: use union in for TMC2130 PWMCONF
...
Simplify writing the value to PWMCONF by
gathering all the bits into one dword.
Change in memory:
Flash: -128 bytes
SRAM: 0 bytes
2023-07-25 08:56:43 +02:00
06100e366c
optimisation: use union in tmc2130_setup_chopper
...
An idea from the MMU FW
Change in memory:
Flash: -278 bytes
SRAM: 0 bytes
2023-07-25 08:56:43 +02:00
6aff3c761b
XYZCal: reduce code size in go_manhattan
...
The variable always takes a value of subtraction
between two int16_t values. It will also fit into int16_t
Change in memory:
Flash: -50 bytes:
SRAM: 0 bytes
2023-07-24 08:15:03 +02:00
5cfdceb184
Remove redundant lcd_draw_update assignment
...
When scrolling through menu items, the rotation event on the knob
takes care of updating the LCD by setting lcd_draw_update.
The menu code doesn't need to do it as well.
Change in memory:
Flash: -6 bytes
SRAM: 0 bytes
2023-07-24 08:13:36 +02:00
1fea4a7335
catch2: Fix build with gcc13
...
Cherrypick of catch2 commit 52066dbc2a53f4c3ab2a418d03f93200a8245451 to
fix the build with gcc 13 without a full update.
2023-07-24 08:07:28 +02:00
57d780ccf9
PFW-1519 Hide Preload to MMU menu item if filament is detected
...
This is by far the simplest solution to prevent the user from sending
a Load command to the MMU when the FINDA or Filament sensor
is detecting a filament. This may even happen if the sensors are poorly positioned.
Either way a Load in this scenario will make the MMU seem to hang as the
state machine will reject the command.
We could add a full screen message to let the use know
but it would require some memory resources.
For now, just hide the menu item.
Change in memory:
Flash: +16 bytes
SRAM: 0 bytes
2023-07-24 08:05:50 +02:00
d4733664a8
Fixed printer_smodel_check for MK3/S and possible older MMU machines ( #4265 )
...
Fixed printer_smodel_check for non MMU machines
Commit 136ef96
2023-07-21 16:02:32 +02:00
43c823987c
MMU version 3.0.0
...
PFW-1529
2023-07-20 12:44:29 +02:00
d67fc84b73
Relink MSG_DESC_INSPECT_FINDA in PO files
2023-07-20 12:32:30 +02:00
3d-gussner
Guðni Már Gilbert
Guðni Már Gilbert
Yuri D'Elia
Addio
D.R.racer