josh
/
Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Prusa-Firmware/Firmware
History
gudnimg cf0e0f3718 M600: use partial backup in RAM 
To handle power panic in M600 we started saving
relevant data at the start of M600 gcode.

We are currently also saving the same data within
gcode_M600 which is saved on the stack. I propose
we just use the data already saved in SRAM to reduce
stack usage.

Change in memory:
Flash: -64 bytes
SRAM: 0 bytes
 		2023-11-17 19:25:56 +00:00
..
mmu2 Fix MMU error message character 2023-10-03 08:19:48 +02:00
thermal_model Rebase update REVO and solve @wavexx comments 2023-07-25 17:24:02 +02:00
variants Remove obsolete mesh definitions 2023-09-13 10:49:52 +02:00
BlinkM.cpp
…
BlinkM.h
…
Configuration.cpp Add static_assert check for TEMP_HYSTERESIS 2023-08-21 06:35:32 +02:00
Configuration.h Not needed anymore thanks to @vintagepc 2023-10-18 18:02:56 +02:00
ConfigurationStore.cpp Rename upper case `TEMP_MODEL` to `THERMAL_MODEL` 2023-07-25 17:13:07 +02:00
ConfigurationStore.h Rename minsegmenttime --> min_segment_time_us 2023-07-25 17:10:44 +02:00
Configuration_adv.h PFW-1523 Implement M79 timer for PrusaLink 2023-10-29 16:33:45 +00:00
Configuration_var.h build: Add Configuration_var.h as a configuration wrapper 2022-10-05 01:26:26 +02:00
Dcodes.cpp Rename axis_steps_per_unit to axis_steps_per_mm 2023-07-25 17:10:44 +02:00
Dcodes.h Improve PAT9125 UI implementation 2022-09-16 10:20:32 +02:00
Filament_sensor.cpp Rename axis_steps_per_unit to axis_steps_per_mm 2023-07-25 17:10:44 +02:00
Filament_sensor.h Optimisation: Move filAutoLoad to ultralcd 2023-04-05 11:16:14 +02:00
Firmware.ino
…
FontTable.h Update enabled diacritics 2023-10-19 13:07:49 +02:00
Marlin.h M600: use partial backup in RAM 2023-11-17 19:25:56 +00:00
MarlinSerial.cpp optimisation: change index from uint32_t to uint8_t 2023-01-25 18:21:22 +00:00
MarlinSerial.h Use timer3 instead of timer5 on miniRambo 2022-08-24 10:18:45 +03:00
Marlin_main.cpp M600: use partial backup in RAM 2023-11-17 19:25:56 +00:00
Prusa_farm.cpp Consistently replace loading_flag with eFilamentAction 2023-07-25 14:30:20 +00:00
Prusa_farm.h Added //#define FARM_CONNECT_MESSAGE 2022-09-16 19:33:22 +02:00
Sd2Card.cpp Enable MISO pullup during SD CMD0 2022-10-10 09:43:50 +02:00
Sd2Card.h Change return types of two functions uint8_t 2022-01-30 11:39:24 +00:00
SdBaseFile.cpp Reduce a few magic numbers for FILENAME_LENGTH 2022-08-26 19:26:26 +03:00
SdBaseFile.h Remove temporary changes from SdBaseFile.h 2021-01-28 09:42:50 +01:00
SdFatConfig.h
…
SdFatStructs.h
…
SdFatUtil.cpp Introduce STACK_GUARD_MARGIN in all variants 2021-06-12 12:08:53 +02:00
SdFatUtil.h Introduce STACK_GUARD_MARGIN in all variants 2021-06-12 12:08:53 +02:00
SdFile.cpp SDFile - fix errorneous offset computation 2021-03-30 11:33:42 +02:00
SdFile.h Remove commented debug code 2021-02-10 11:18:59 +01:00
SdInfo.h
…
SdVolume.cpp
…
SdVolume.h Extract gcode filter from SdBaseFile into SdFile + optimization 2021-01-27 09:33:28 +01:00
Servo.cpp change boolean to bool 2021-07-20 08:03:17 +02:00
Servo.h
…
SpoolJoin.cpp optimisation: spooljoin: use new eeprom init method 2023-02-11 15:58:07 +01:00
SpoolJoin.h Remove eeprom.h include in SpoolJoin header 2023-07-13 09:57:52 +02:00
Tcodes.cpp Remove redundant st_synchronize 2023-07-14 15:06:38 +00:00
Tcodes.h Simplify processing T? Tcode 2023-07-14 15:06:38 +00:00
Timer.cpp optimisation: Timer constructor can be constexpr 2023-08-20 19:39:38 +00:00
Timer.h optimisation: Timer constructor can be constexpr 2023-08-20 19:39:38 +00:00
TimerRemaining.h Fix Timer_test broken by conditional translation for SYSTEM_TIMER_2. 2019-01-28 19:29:31 +01:00
adc.cpp Decouple temperature ISR from ADC readings 2022-07-25 17:30:21 +02:00
adc.h Fixup after rebase onto MK3 2022-09-16 10:23:47 +02:00
asm.h Simplify GETPC() 2022-02-02 21:06:58 +01:00
backlight.cpp Remove Marlin.h include in backlight.h 2023-07-13 09:57:52 +02:00
backlight.h Remove Marlin.h include in backlight.h 2023-07-13 09:57:52 +02:00
boards.h
…
bootapp.c bootapp cleanup 2023-10-03 08:19:48 +02:00
bootapp.h bootapp cleanup 2023-10-03 08:19:48 +02:00
cardreader.cpp PFW-1543 Move printing types into enum 2023-10-01 12:57:25 +00:00
cardreader.h Reduce a few magic numbers for FILENAME_LENGTH 2022-08-26 19:26:26 +03:00
cmdqueue.cpp Cleanup language.h includes 2023-07-13 09:57:52 +02:00
cmdqueue.h Cleanup language.h includes 2023-07-13 09:57:52 +02:00
config.h Enable Analog IR sensor again 2023-04-16 13:58:18 +00:00
doxyfile Updated doxygen docs to work better with confluence. 2019-07-19 13:51:55 +02:00
eeprom.cpp Cleanup language.h includes 2023-07-13 09:57:52 +02:00
eeprom.h Replace unused EEPROM entry names with placeholders 2023-11-12 16:21:34 +00:00
fancheck.cpp PFW-1542 Reset status line message on EFCE_OK 2023-10-15 12:26:44 +00:00
fancheck.h Move ISR7 code to fancheck.cpp 2023-05-23 07:43:40 +02:00
fastio.h Change arduino IO to fastio where possible 2022-01-30 11:22:43 +00:00
first_lay_cal.cpp Cleanup language.h includes 2023-07-13 09:57:52 +02:00
first_lay_cal.h Implement variant of enquecommand which accepts format string 2023-04-05 09:10:39 +02:00
heatbed_pwm.cpp Remove unnecessary assignment 2021-06-21 06:47:59 +02:00
host.cpp PFW-1523 Implement S parameter for M79 2023-11-04 20:38:50 +00:00
host.h PFW-1523 Implement S parameter for M79 2023-11-04 20:38:50 +00:00
la10compat.cpp Rename max_acceleration_units_per_sq_second to max_acceleration_mm_per_s2 2023-07-25 17:10:44 +02:00
la10compat.h Adjust E-jerk in LA10 compatibility mode 2020-02-03 15:42:27 +01:00
language.c optimisation: lcd avoid streams 2023-07-25 15:02:49 +00:00
language.h optimisation: lcd avoid streams 2023-07-25 15:02:49 +00:00
lcd.cpp Add font unpacking documentation 2023-10-03 08:19:48 +02:00
lcd.h Move custom character type to lcd.cpp 2023-10-03 08:19:48 +02:00
le.sh
…
macros.h Use timer3 instead of timer5 on miniRambo 2022-08-24 10:18:45 +03:00
meatpack.cpp MeatPack gcode compression support 2023-04-13 10:50:15 +02:00
meatpack.h MeatPack gcode compression support 2023-04-13 10:50:15 +02:00
menu.cpp Fix frame start for non-menu screens 2023-10-03 08:19:48 +02:00
menu.h Optimize menu editing by reducing template duplication 2023-08-01 12:41:38 +02:00
mesh_bed_calibration.cpp MBL: optimise EEPROM read/writes 2023-10-25 17:36:15 +00:00
mesh_bed_calibration.h Combine BED_X/Y() and mbl::get_x/y() 2023-08-17 07:52:55 +02:00
mesh_bed_leveling.cpp Combine BED_X/Y() and mbl::get_x/y() 2023-08-17 07:52:55 +02:00
mesh_bed_leveling.h Combine BED_X/Y() and mbl::get_x/y() 2023-08-17 07:52:55 +02:00
messages.cpp Fix filament change behavior when print is paused 2023-11-11 16:51:35 +00:00
messages.h Fix filament change behavior when print is paused 2023-11-11 16:51:35 +00:00
mmu2.cpp MMU: Remove gcode_reset_stepper_timeout 2023-11-16 14:30:29 +00:00
mmu2.h Updated MMU serial status message 2023-11-11 12:18:34 +01:00
mmu2_config.h Split the mmu2 config into MMU2 and MMU2S 2022-12-18 09:58:20 +01:00
mmu2_crc.cpp Sync MK3<->MK4 MMU2 crc 2023-09-18 10:51:32 +02:00
mmu2_crc.h Sync MK3<->MK4 MMU2 crc 2023-09-18 10:51:32 +02:00
mmu2_error_converter.cpp mmu: remove ResetOnExit 2023-10-19 18:32:42 +00:00
mmu2_error_converter.h Clean-up ProgressCodes and ErrorCodes parameters throughout the code 2023-09-18 10:51:32 +02:00
mmu2_fsensor.cpp Reuse FSensor runout blocking impl. throughout the whole FW 2022-09-16 10:22:38 +02:00
mmu2_fsensor.h clang-format 2023-01-31 09:35:22 +01:00
mmu2_log.cpp Remove `MMU2` and `MMU unit` messages 2023-03-14 08:30:15 +01:00
mmu2_log.h Sync MK3<->MK4 MMU2 log 2023-09-18 10:51:32 +02:00
mmu2_marlin.h MMU: Remove gcode_reset_stepper_timeout 2023-11-16 14:30:29 +00:00
mmu2_marlin1.cpp MMU: Remove gcode_reset_stepper_timeout 2023-11-16 14:30:29 +00:00
mmu2_marlin_macros.h Sync MK3<->MK4 MMU2 marlin macros 2023-09-18 10:51:32 +02:00
mmu2_power.cpp mmu: remove obsolete EEPROM comments 2023-10-19 18:32:42 +00:00
mmu2_power.h MMU2 interface overhaul 2022-09-16 10:21:53 +02:00
mmu2_progress_converter.cpp Sync MK3<->MK4 MMU2 reporting 2023-09-18 10:51:32 +02:00
mmu2_progress_converter.h Sync MK3<->MK4 MMU2 reporting 2023-09-18 10:51:32 +02:00
mmu2_protocol.cpp cleanup: Remove implicit fallthrough in CRC validation 2022-09-30 12:55:47 +02:00
mmu2_protocol.h Implement read/write registers for M707/M708 2022-09-16 10:23:47 +02:00
mmu2_protocol_logic.cpp mmu: add ResetCommunicationTimeoutAttempts 2023-10-19 18:32:42 +00:00
mmu2_protocol_logic.h mmu: add ResetCommunicationTimeoutAttempts 2023-10-19 18:32:42 +00:00
mmu2_reporting.cpp Updated MMU serial status message 2023-11-11 12:18:34 +01:00
mmu2_reporting.h mmu: remove isErrorScreenRunning() 2023-10-19 18:32:42 +00:00
mmu2_serial.cpp cleanup: Remove return value from MMU2Serial::write() 2022-09-30 12:55:47 +02:00
mmu2_serial.h cleanup: Remove return value from MMU2Serial::write() 2022-09-30 12:55:47 +02:00
mmu2_state.h Remove `MMU2` and `MMU unit` messages 2023-03-14 08:30:15 +01:00
mmu2_supported_version.h Increase required MMU FW version to 3.0.1 2023-08-11 11:09:53 +02:00
motion_control.cpp optimisation: there is only one extruder when planning a line 2023-01-06 19:33:32 +01:00
motion_control.h optimisation: there is only one extruder when planning a line 2023-01-06 19:33:32 +01:00
optiboot_xflash.cpp bootapp cleanup 2023-10-03 08:19:48 +02:00
optiboot_xflash.h Rename w25x20cl to xflash 2021-04-06 10:16:47 +02:00
pat9125.cpp optimisation: lcd avoid streams 2023-07-25 15:02:49 +00:00
pat9125.h Cleanup pat9125.h 2022-09-16 10:17:04 +02:00
pins.h Move SDA/SCL pins into pins.h for fastio compatibility 2021-01-29 17:48:59 +01:00
pins_Einsy_1_0.h Fix MK2.5 softReset() 2022-12-16 12:10:47 +01:00
pins_Rambo_1_0.h More documentation for pins file 2022-12-16 12:29:59 +01:00
pins_Rambo_1_3.h More documentation for pins file 2022-12-16 12:29:59 +01:00
planner.cpp Rename minsegmenttime --> min_segment_time_us 2023-07-25 17:10:44 +02:00
planner.h Change unsigned long to uint32_t 2023-07-25 17:10:44 +02:00
power_panic.cpp power panic: support any valid DOS 8.3 extension 2023-11-05 16:46:54 +00:00
power_panic.h PFW-1543 Move printing types into enum 2023-10-01 12:57:25 +00:00
printers.h Change MMU2 to MMU3 2023-06-27 11:41:09 +02:00
qr_solve.cpp
…
qr_solve.h
…
rbuf.c
…
rbuf.h
…
sm4.c build: Add Configuration_var.h as a configuration wrapper 2022-10-05 01:26:26 +02:00
sm4.h Fix sm4.h line ending 2021-01-22 18:57:24 +02:00
sound.cpp Remove Marlin.h include in backlight.h 2023-07-13 09:57:52 +02:00
sound.h optimisation: sound: use new eeprom_init function 2023-02-11 15:56:46 +01:00
speed_lookuptable.cpp Move speed lookup defs into a separate source 2019-05-24 17:08:32 +02:00
speed_lookuptable.h Fix MUL24x24R24 comment 2022-02-09 00:26:46 +01:00
spi.c
…
spi.h
…
static_assert.h
…
stepper.cpp Fix and optimise VERBOSE_CHECK_HIT_ENDSTOPS 2023-08-13 13:44:40 +00:00
stepper.h Optimize `st_set_position()` for speed and size 2023-07-13 09:54:33 +02:00
stk500.h
…
strlen_cx.h clang-format 2023-01-31 09:35:22 +01:00
strtod.c MeatPack gcode compression support 2023-04-13 10:50:15 +02:00
swi2c.c build: Add Configuration_var.h as a configuration wrapper 2022-10-05 01:26:26 +02:00
swi2c.h Add disable() to swi2c as well 2022-09-16 10:06:26 +02:00
system_timer.h Remove dead macro timer02_set_pwm0 2023-07-14 14:28:14 +02:00
temperature.cpp TM: Optimise EEPROM read and writes 2023-10-25 17:37:04 +00:00
temperature.h Rename `Temperature Model` to `Thermal Model` 2023-07-25 17:13:07 +02:00
thermal_model.h Fix @wavexx complains 2023-07-26 09:33:16 +02:00
thermistortables.h Remove TEMP_SENSOR_1 and TEMP_SENSOR_2 2023-04-22 15:15:21 +00:00
timer02.c split timer0 and timer2 initialization. Move timer2 init early 2021-01-31 17:18:32 +02:00
timer02.h split timer0 and timer2 initialization. Move timer2 init early 2021-01-31 17:18:32 +02:00
tmc2130.cpp tmc2130: write chopper config and powerdown setting first 2023-08-05 10:41:21 +02:00
tmc2130.h Merge pull request #4150 from gudnimg/psu-delta-typo 2023-09-12 16:28:32 +02:00
tone04.c build: Add Configuration_var.h as a configuration wrapper 2022-10-05 01:26:26 +02:00
tone04.h ALTFAN implementation (#2692) 2020-06-01 17:58:15 +02:00
twi.cpp twi safe init 2022-09-16 10:06:26 +02:00
twi.h Shorter TWI timeout 2022-09-16 10:06:26 +02:00
uart2.c Increase RX buffer size 2022-09-16 10:21:53 +02:00
uart2.h Implement mmu2 serial interface 2022-09-16 10:21:53 +02:00
ultralcd.cpp Merge pull request #4408 from gudnimg/PR2390 2023-11-16 07:37:42 +00:00
ultralcd.h Echo the result onto serial 2023-07-27 16:44:34 +00:00
util.cpp PFW-1523 Refactor parsing quoted strings 2023-11-04 17:45:14 +00:00
util.h PFW-1523 Trim trailing whitespace in util.h 2023-11-07 07:27:26 +00:00
vector_3.cpp
…
vector_3.h
…
xflash.c xflash: add xflash_multipage_program and documentation 2021-06-08 15:25:16 +02:00
xflash.h xflash: add xflash_multipage_program and documentation 2021-06-08 15:25:16 +02:00
xflash_dump.cpp Simplify GETPC() 2022-02-02 21:06:58 +01:00
xflash_dump.h Crash if pullups get enabled on the thermistor inputs 2022-02-01 12:34:07 +01:00
xflash_layout.h Make layout static regardless of what is enabled 2022-02-17 09:34:09 +01:00
xyzcal.cpp XYZCal: reduce code size in go_manhattan 2023-07-24 08:15:03 +02:00
xyzcal.h Typo: meassure -> measure 2022-12-22 12:54:42 +01:00