63b628d722
Merge pull request #4396 from 3d-gussner/MK3_PFW-1538_M420
...
PFW-1538: Add M420
2023-10-13 14:27:34 +02:00
2027a54873
Merge pull request #4420 from gudnimg/PFW-1543
...
PFW-1543 Save print type in EEPROM
2023-10-06 09:04:30 +02:00
8b9b63c35b
Merge pull request #4418 from gudnimg/PFW-1542-v2
...
PFW-1542 Handle fan error sooner when waiting for heating to complete
2023-10-03 10:16:49 +02:00
dd32f7be3c
bootapp cleanup
2023-10-03 08:19:48 +02:00
5466bfb500
Cleanup uartout declaration
2023-10-03 08:19:48 +02:00
3eaca29b0b
PFW-1543 Move printing types into enum
...
Also add power panic namespace
2023-10-01 12:57:25 +00:00
e621d3445e
PFW-1542 Handle fan error sooner when waiting for heating to complete
...
While waiting for the nozzle to reach a certain temperature, a fan error
should disable the hotend heater. If printing, it will simply pause the print.
Previously the printer would wait for the nozzle to heat up before pausing the print
and turning off the hotend heater.
We rely on LcdCommands::LongPause and must return to the top level loop to process it.
Waiting in the while loop e.g. in M190 does not make sense.
2023-09-30 14:01:09 +00:00
f8c64de505
Merge pull request #4390 from sarusani/mbl_mag_comp
...
MBL: Add magnet compensation parameter
2023-09-22 14:57:09 +02:00
e323490659
optimisation: Remove unused Z offset
...
Frees up some SRAM
Change in memory:
Flash: 0 bytes
SRAM: -4 bytes
2023-09-19 23:37:38 +00:00
1996f977e1
Merge branch 'MK3' into mbl_mag_comp
2023-09-18 15:55:42 +02:00
8bd71b7bf0
Merge pull request #4391 from sarusani/mbl_default_to_eeprom
...
MBL: Default to EEPROM values
2023-09-18 15:52:38 +02:00
039202f34b
Fix typo
2023-09-18 15:48:36 +02:00
0877585bd1
Add M420
...
Same as G81
2023-09-18 15:45:13 +02:00
be5523187b
Sync MK3<->MK4 MMU2 mmu2_mk4.h
2023-09-18 10:51:32 +02:00
84d353793d
Fix typos
2023-09-16 12:38:14 +02:00
e4a10e5fab
Move code_seen back into if statement
...
Same memory usage, but prettier to look at. :)
2023-09-15 14:11:27 +02:00
56a79f88ef
Optimise memory usage
2023-09-15 14:11:27 +02:00
2951bc8af0
Default to eeprom values
...
Use eeprom values if provided parameters are out of bounds.
2023-09-15 14:11:27 +02:00
9e794a47a4
Merge pull request #4386 from 3d-gussner/MK3_mbl_print_area_translations
...
🚧 Add new MBL message for #4183 and translation
2023-09-15 09:00:38 +02:00
21c57a1222
Add parameter for magnet compensation
...
allow to enable/disable magnet compensation when 7x7 is in use.
2023-09-14 21:02:56 +02:00
2863c9bc01
Cleanup: whitespace in nProbeRetryCount var
2023-09-14 09:43:26 +02:00
5f605012eb
Merge pull request #4388 from prusa3d/vintagepc/tmc-mode-query
...
Add Q parameter to M91[4/5]
2023-09-14 09:13:55 +02:00
70d83fe4ee
Add Q parameter to query current mode.
2023-09-13 16:52:11 -04:00
a9c8bb7dbf
Code cleanup: rename params
2023-09-13 18:31:45 +02:00
d3bb6e5ca5
Rename MBL repeat param
2023-09-13 17:37:39 +02:00
ca27841d67
Add new MBL message for #4183 and translate these messages
2023-09-13 11:14:16 +02:00
2e70697fa7
Merge pull request #4183 from leptun/mbl_print_area
...
MBL print area
2023-09-13 10:28:08 +02:00
74f724b228
Merge pull request #4174 from gudnimg/check_all_heaters
...
optimisation: use `CHECK_ALL_HEATERS` in more places
2023-09-12 16:31:45 +02:00
c84985ec3e
Merge pull request #4328 from dawidpieper/m850_addselection
...
M850 add possibility to set sheet as active
2023-09-11 13:02:04 +02:00
e6f05e7856
PFW-1522 Fix firmware getting stuck on ejecting
...
If slot is unknown, the printer will always get a rejected command
error from the MMU.
Change in memory:
Flash: +4 bytes
SRAM: 0 bytes
2023-08-18 14:27:39 +02:00
fc18f4c5d7
PFW-1522 Implement filament change screen
...
Change in memory:
Flash: +116 bytes
SRAM: +1 byte
2023-08-18 14:27:39 +02:00
ede4cc5d30
Update error messages
2023-08-17 08:02:47 +02:00
45823e7336
Make the G80 Z threshold tighter
2023-08-17 08:02:47 +02:00
f5f09f147c
Add a limit to how many times G80 can fail
...
Flash: +80
SRAM: +1
2023-08-17 07:53:39 +02:00
7740a81edb
Do not store a global mbl_z_probe_nr
...
flash: -6
sram: 0? (somehow)
2023-08-17 07:53:39 +02:00
a984b2e609
G80 `O` parameter
...
a
2023-08-17 07:53:39 +02:00
a15f536ff4
Combine BED_X/Y() and mbl::get_x/y()
...
flash: -112
2023-08-17 07:52:55 +02:00
6b12be42d9
optimisation: Make BED_X and BED_Y into functions
...
Previously these preprocessor macros were always being inlined.
By making these into a function we can control the inlining
more directly.
The number of points on the mesh is also now constant. This means
'n' can now be float at compile time. This removes one uint8_t to float
conversion.
Change in memory:
Flash: -208 bytes
SRAM: 0 bytes
2023-08-17 07:52:55 +02:00
3ccf2d60c0
Make bed correction matrix const
2023-08-17 07:52:55 +02:00
be3465cf18
optimize lambda expression capture
...
flash: -10
2023-08-17 07:52:55 +02:00
2d0b96fe6a
Bed correction code optimization
...
flash: -44
2023-08-17 07:52:55 +02:00
5b8c65e342
Minor magnet elimination optimization
...
flash: -4B
2023-08-17 07:52:55 +02:00
67945579de
G80 minor optimization
2023-08-17 07:52:55 +02:00
a5c20a1c6e
Do not plan a Z move if no move is actually performed
2023-08-17 07:52:55 +02:00
de98551691
Extract hardcoded value
2023-08-17 07:52:55 +02:00
40db9c9258
Fix eeprom mesh offset
2023-08-17 07:52:55 +02:00
a7d3dd720b
Fix eeprom mesh interpolation
2023-08-17 07:52:55 +02:00
36d8de0727
G80 general fixes
...
Use interpolated eeprom mesh for skewed Z detection
Use the interpolated eeprom mesh for raising Z for the next point
Fix LCD countdown during MBL
2023-08-17 07:52:55 +02:00
b234560b22
MBL print function optimization
2023-08-17 07:52:55 +02:00
f94bc72235
Optimize G80 bed correction argument parsing
2023-08-17 07:52:55 +02:00
3d-gussner
Alex Voinea
gudnimg
D.R.racer
sarusani
VintagePC