880d2f28bd
LCD menu only sends `// action:ready` or `// action:not_ready` via serial
...
Host has to send back state with `M72 S1|0` to keep printer and host in sync
Changed LCD menu messages to `Set ready` and `Set not ready`
Updated translations
2023-11-22 07:58:17 +01:00
d276695ce7
Set Ready
2023-11-22 07:58:13 +01:00
45880c252b
Fix filament change behavior when print is paused
...
Reimplementing PR 2390
https://github.com/prusa3d/Prusa-Firmware/pull/2390
from @wavexx
2023-11-11 16:51:35 +00:00
1c637f8082
Fix " 🔃 Refresh" translation
2023-10-03 08:19:48 +02:00
47775e158b
Reuse messages
2023-08-21 19:00:22 +02:00
0bbec5626c
Update and fix translations
2023-08-21 16:28:36 +02:00
44ae8033eb
Rename upper case `TEMP_MODEL` to `THERMAL_MODEL`
2023-07-25 17:13:07 +02:00
f43451f80b
Update `MSG_EJECT_FILAMENT` and `MSG_CUT_FILAMENT` to `c=16`
...
Had to shorten SK translation
2023-05-23 09:50:27 +02:00
a37bcbfd8c
Fix `Load filament` to c=16
2023-05-23 09:45:07 +02:00
9d5453a41e
PFW-1520 Rename Load Filament menu to Preload to MMU
...
Change in memory:
Flash: +18 bytes
SRAM: 0 bytes
2023-05-22 07:53:26 +02:00
26369ac540
Restore old M701/M702 behavior
...
If the new Z parameter is not given,
assume that the old Z-lift behavior is desired.
Change in memory:
Flash: -28 bytes
SRAM: 0 bytes
2023-04-29 16:22:28 +00:00
7f921b4071
Limit some of the float formatting to fit 30 bytes buffer in enquecommandf_P
2023-04-05 09:10:39 +02:00
7e0bf88431
Use `G28 W` only
2023-03-22 12:30:16 +01:00
bc27b71729
Pull one common G1 gcode into PROGMEM
...
Change in memory:
Flash: -32 bytes
SRAM: 0 bytes
2023-03-18 17:37:27 +00:00
6edd8b0719
Add M220 into PROGMEM
...
Change in memory:
Flash: -10 bytes
SRAM: 0 bytes
2023-03-18 17:09:43 +00:00
00515a975d
Add M107 into PROGMEM
...
Change in memory:
Flash: -4 bytes
SRAM: 0 bytes
2023-03-18 17:05:35 +00:00
5ade1716bf
Add M500 into PROGMEM
...
Change in memory:
Flash: -6 bytes
SRAM: 0 bytes
2023-03-18 17:01:59 +00:00
733bc874fb
Move G28W0 to messages
...
No change in memory
2023-03-18 16:48:30 +00:00
466a6a8fc3
Add M600 into PROGMEM
...
Change in memory:
Flash: -10 bytes
SRAM: 0 bytes
2023-03-18 16:33:13 +00:00
129cc18cbf
Add M23 %s into PROGMEM
...
Change in memory:
Flash: -14 bytes
SRAM: 0 bytes
2023-03-18 16:18:05 +00:00
7c0ead7bc2
Add M24 into PROGMEM
...
Change in memory:
Flash: -8 bytes
SRAM: 0 bytes
2023-03-18 16:15:10 +00:00
5f8fc64a32
Restore previous Z-lift in M701/M702
...
Previously when the firmware called M701/M702 manually
there was no Z lift. But after we added support for the Z
parameter we set the default to 50mm.
Change strings "M701" to "M701 Z0" and "M702" to "M702 Z0"
to restore the previous behavior from before 3.13.
Also pulled the gcodes into PROGMEM in message.cpp
along with M83 and M84 to save memory.
Change in memory:
Flash: -34 bytes
SRAM: 0 bytes
2023-03-18 15:34:47 +00:00
e951a106d6
Messages fit to pages
2023-03-14 08:56:46 +01:00
03778226ca
Remove `Select Extruder:` message
...
Post fix PR4064 for update.po*.py scripts
2023-03-14 08:24:12 +01:00
93598ef00d
Change some messages to be max three rows instead of two
...
Yes|No are now located at the 4th row and so messages can
use three rows. This should allow improvement in some translations.
2023-03-14 08:23:40 +01:00
5cd60636f9
Add missing translations + shorten to 16 chars
2023-02-18 17:39:30 +01:00
98e7c15928
Change Eject filament -> Eject from MMU
...
PFW-1497
2023-02-18 17:39:30 +01:00
05662a5c0a
optimsation: reduce code size in LCD rendering
...
Change in memory (MK3S+ Multilang):
Flash: -62 bytes
SRAM: -6 bytes
2023-02-18 16:32:08 +01:00
8b1b632164
Fix copy/paste typo thanks to @gudnimg
2023-02-10 14:35:36 +01:00
4f8dbb19fd
Fix `M862.x` LCD messages
...
As the new menue adds a Yes/No option the messages
need to be limited to c=20 r=3
Updated/shortened all translations
2023-02-10 14:35:36 +01:00
ca978080c4
Change to Thermal model
...
Add prusa.io/tm-cal link
and update all TM related translations
2023-02-08 15:36:59 +01:00
b28aa6f42a
PFW-1471 Rename 'Toolchange count' to 'Material changes'
...
Added the string to our message so it can be translated
Change in memory:
Flash: -10 bytes
SRAM: 0 bytes
2023-02-06 08:33:40 +01:00
dba3428ef2
Improve MSG_ACK_ERROR message
2022-12-17 20:25:47 +01:00
f8290f25cd
TM: Allow to resume without a running print
...
If there is no running print, and the printer is Stopped, add a new
"Acknowledge error" menu entry to unlock the printer.
This simply calls lcd_print_stop(), which is identical in behavior to a
thermal error with a running print.
2022-12-17 16:48:39 +01:00
54ef2a6c28
Merge pull request #3769 from 3d-gussner/MK3_Temp_model_cal_wizard
...
PFW-1434: MK3 Temp model calibration during wizard
2022-11-30 15:33:38 +01:00
32673e1681
Nozzle change menu
2022-11-23 11:39:26 +01:00
4eaabbf092
Revive MMU stats + LCD screens
2022-11-20 17:27:36 +01:00
281a217549
Update Temp Model messages
...
Deepl translate cs,de,es,fr,it,nl,pl
2022-11-20 10:49:46 +01:00
2096accc5f
Remove unused gcode level check code
...
This code was introduced with v3.8.0 but was always disabled.
I propose the code be removed since it has not been enabled
for 3 years since its introduction.
2022-11-17 08:05:27 +01:00
e11ef11a64
PFW-1425 Rename "Load to Extruder" to "Loading Test"
2022-11-16 06:00:15 +01:00
f2fe9a51ee
rename `Extruder fan` to `Hotend fan`
2022-10-17 13:49:18 +02:00
1d3ee1caba
build: Add Configuration_var.h as a configuration wrapper
...
Instead of including Configuration_prusa.h directly, include
Configuration_var which then includes the proper variant file though a
preprocessor macro.
This allows to keep the existing build system intact, but also redefine
at compile time the final header without having to make copies on the
file system.
2022-10-05 01:26:26 +02:00
74e15ac233
Rename EN_ONLY to EN_FARM
...
remove DEBUG/DEVEL/ALPHA/BETA lcd warning
2022-09-29 16:39:02 +02:00
c7b500af1e
BETA firmware message only in English
...
Rephrase BETA firmware message to fit on two screens
ALPHA message same as DEVEL
Fix ALPHA DEVEL message
2022-09-29 10:48:16 +02:00
47d7ea5dfd
Add MSG_LOAD_ALL and replace it a two loactions -10bytes flash
2022-09-17 16:36:09 +02:00
539cdbfeea
Lower MSG_ rows
2022-09-17 08:48:56 +02:00
2ba863d8a5
Reuse MSG_IR_0x_OR_..
...
fix lowercase
remove todos
2022-09-16 17:23:38 +02:00
edad625cf7
RIP Bondtech long live the Extruder
2022-09-16 16:31:27 +02:00
37cde856e9
Rename Auto_deplete to Spool_join
...
Fix some missing MSG_ c= r=
2022-09-16 16:25:47 +02:00
2d98cae8bd
Fixup MK3_MMU2 branch after rebase onto MK3
2022-09-16 11:08:03 +02:00
3d-gussner
gudnimg
Alex Voinea
D.R.racer
Yuri D'Elia